use two different characters in the same domain

Similar Questions

• Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Hi Morten,

  Yes, you can have your subscription or your license installed on two different computers with the same adobe id, however use one at a time.

  Please let us know if you have any questions, more about it.

• How to run two 'County of buffered edge' using two different counters at the same time?

  Hello

  I try to use two counters at the same time count the TTL pulses for a fixed period (lets say 10 ms). I have the card PCI-6251 and PCI-6601. I am currently using PCI 6601 as counters and running a self updated the ' stamped edge County - reset.VI. Here, I have attached my VI.

  Now, during the execution of this VI, I get an error saying "error-200251 occurred at Task.vi:4 DAQmx Start" and the possible reasons are, "measures: no USB or DMA channels in loose ends are available.»

  Either stop other tasks which might be using these resources or are considering changing your mechanism for transfer of data to the interruptions if supported.

  Device: Dev2

  Task name: _unnamedTask<80>. »

  What I realized is I'm trying to use two buffers for two meters with ten samples each and this is probably not allowed. I don't know how to solve this out and bad looking for your suggestions.

  Thanks in advance.

  Hi all

  I found a solution too. This is the VI updated the "County of edge stamped" which can simultaneously run two entries-meter using a single source of door and it also uses the DMA and interrupts to save two pads.

  Have a nice weekend.

• possible to have 2 different application fields for two different clips at the same time

  Hello

  possible to have 2 different application fields for two different clips at the same time for the classification match in terms of the scope, only not to the eye?

  Not that I know of.  And Yes, it would be very useful. As would the ability to go back 2 in reading monitor and a button "game clip under the read head 1. Sigh.

  Neil

• Insertion of records in two different tables at the same time?

  Hello everyone, I have question about inserting records in two different tables at the same time, I'm looking for is by the way a unique id, which is created in the first statement insert to the second insert statement. Example of this problem:

  < cfquery name = "addRecords1" datasource = 'test' >

  Insert Into Table1 (name, Date, age)

  Values (< cfqueryparam cfsqltype = "cf_sql_char" value = "#arguments.) "Name # ' >.

  < cfqueryparam cfsqltype = 'cf_sql_date' value = '#arguments. "Date # ' >.

  < cfqueryparam cfsqltype = "cf_sql_int" value = "#arguments. Age #"(>); "

  Select SCOPE_IDENTITY() as RecID;

  < / cfquery >

  < cfquery name = "addRecords2" datasource = 'test' >

  Insert into Table2(Company,City,Date,ID)

  Values (< cfqueryparam cfsqltype = "cf_sql_char" value = "#arguments.Company #" >,)

  < cfqueryparam cfsqltype = "cf_sql_char" value = "" #City # ">,"

  < cfqueryparam cfsqltype = 'cf_sql_date' value = "" #Date # ">,"

  ( < cfqueryparam cfsqltype = "cf_sql_int" value = "How to pass RecID to insert in this table?" >).

  < / cfquery >

  In this example, I'm inserting records in table 1 and creation of IDENTITY SCOPE as RecId. I would like to pass this id and insert it in my table 2. This Id, I'll use in my second table as an identifier. If anyone knows anything about this please let me know. Thank you.

  );
  

  QueryName - DOT - ColumnName, so it should be:

  );
  

  HTH,

  ^_^

• How to divide the screen into two parts in order to see the two different parts of the same file? [Suggestion] [Android]

  I am Brazilian and I use Adobe Acrobat Reader DC a lot. I would suggest an implementation of features present in the PC, I missed a lot of things on Android, which is 'New window' or something like that, like split the screen into two parts in order to see the two different parts of the same file.

  For smartphones, its use is restricted, but for tablets, it can be really useful, because it allows the display of two distinct points of the same file,

  I have reduced considerably the use of paper using this application, however, I need to navigate the file always pick up a few points seen earlier, which causes a lot of discomfort compared to printed documents.

  This is a suggestion, but I would like it to be considered.

  Thank you for your request. We have taken note of the same and must try to integrate it into one of our future releases.

  Thank you.

• appearing in two different colors at the same time container attached screenshot.

  Hello

  I am very impressed with this site's Look, you can see that
  in this the container showed up in two different colors at the same time as shown in the attached screenshot.

  Please tell me how to get there?

  A part is loading advertising and other view their business rules.

  Please tell me how to get this behavior

  Because when I use the Application container = 'black' background color, it displays the container integer oiail color.

  Help, please

  Thanks in advance.

  There are many ways to achieve this. We can be to use the background image for the application. Other means may be to use various containers (Panel, canvas etc with background pictures) to get this look. Think of it in HTML view. How you can use the div tags to your page layout, you can use various containers of Flex to your page layout.

• How to use several different sections of the same clip in the timeline?

  Hey, I used this tutorial as a reference for editing. I have my own equipment I want change, which includes several takes different. Is it possible to use several different sections of the same clip in the timeline? You know, like the good part of a certain record keeping. I appreciate any assistance. Thank you

  Post edited by: Kevin Monahan

  Reason: changed the title of best research opportunities

  I prefer to put the clip in the Source monitor Panel, then set the points and exit. From there you can simply drag the section of the element in the sequence.

  Or, you can make a subelement, the section will have a distinct element in the bins in the project Panel. You should always keep the original material, but now you can have real subitems to work if you prefer.

• Culture in two different places in the same page

  What on Earth, I want to crop in two different places in the same page. For example, I want to keep something in the upper part and something in the lower part, but skip the other parts. What happens on Earth, I can do that, gentlemen?

  There is a rectangle of cropping by page.  What the parties 'ignored' would look like? Flat white?

• Why can I get two different results from the same coefficients?

  I get two different results of the evaluation of the polynomial function.

  For the first, I get the coefficients of a polynomial function to adapt.  I feed the coefficients of the function made the function Eval Poly and get the correct 12.8582 result when I evaluate 49940.

  For the second, I create constant array of values that have been returned by the polynomial Fit function (I typed in).  However, I get an incorrect result of - 120.7913 when I feed the constant table the function Eval Poly when I evauate 49940.

  How this can happen when I use the same values in table?

  A picture of what I explained is attached.

  Hi Altran,

  are you sure about using the 'same '?

  You compare them? Do you have (at least) set them to 17 digits display properties?

  Please attach a VI instead of an image...

• Can I use two DSL modems in the same House at the same time?

  original title: DSL Modems

  Can I use two different DSL Modems in the same House for two different computers?

  If you want to use on the same connection that want to use on a different connection than Yes and no. But its best to check with your ISP.

• A target table is in charge of two different sources but the same columns, but a source is one database and another in a flat file.

  We all hope you are doing well.

  I have a business problem to implement in ODI 11 G. It's here. I'm trying to load a target table from two sources that have the same column names. But a source is to the file format and the other is in the Oracle database.

  That's what I think I'll create two mappings in the same interface by using the Union between the sources. But I don't know how the interface would connect to different logical architecture to connect to two different sources.

  Thank you

  SM

  You are on the right track, all in a single interface. Follow these steps

  (1) pull model of your data in the designer of the source file and your table model target to the target pane.

  (2) all relevant columns map

  (3) in the source designer to create a new dataset and choose as the UNION join type (this will create a separate tab in the source designer pane)

  (4) select the new dataset tab in the source designer pane and pull your source oracle table data model in the designer of the source. All columns that are relevant to the target card

  (5) make sure that your staging location is set to a relational technology i.e. in this case the target would be an ideal candidate because it is where the ODI will organize the data from source two files and oracle and perform the UNION before loading to the target

  If you want to watch some pretty screenshots showing the steps above, take a look at http://odiexperts.com/11g-oracle-data-integrator-part-611g-union-minus-intersect/

• PS shows two different colors under the same

  I have the 61BEBF and the 28BEBF in color Adobe and I try to import them to PS and they look on the screen of the same color. It is not a monitor problem, because Adobe color, I can see the difference between the two colors. What can I do?

  You must realize that the hexadecimal notation is meaningless without reference to a specific color space.

  Hex is not different from RGB - the same number will produce a different color in different color spaces. And conversely, the same color will be different hexadecimal numbers in different color spaces.

  Hex was invented before the modern color management and the concept of the color spaces. The only color space, you had back has your monitor, which is of course different from the configuration to the configuration. Then hex has been designed as a convenient method to designate the monitor values. There was never any pretext of accurate color fidelity.

  Today, we have something much better and hex is really outdated and obsolete.

  I suspect that the reason why it has survived for so long, that is that it sounds very "computerish" and geek, and so people incorrectly assume that it has a special meaning. This isn't.

  Get used to working with the RGB values in the color spaces defined and specific. For the web, this would normally be sRGB.

• How to use two different versions of the stub of Web Services SDK files in a single project (5.5 and 6.0)

  Hello

  I have a project that uses the vSphere 5.5 management SDK (I built the stub files according to the documentation) and have these in my c# Solution. Everything works beautifully. My class files that interact with vSphere all have a use statement as follows:

  using Vim25Api;

  All fine so far.

  Now, I want to be able to provide support for a user to connect to vSphere 5.5 and 6.0 vSphere environments. I built the stub files for vSphere Management 6.0 SDK and those in my solution presented in a separate project. Each project is based on a different class library and I have each set of files for each version of vSphere stub in different NuGet packages. However, when I select to use a vSphere 5.5 connection, it seems that internally the 6.0 files stub are used, or vice versa.

  I tried to separate things out by giving the Vim25Service.dll and Vim25Service.XmlSerializers.dll files for each version of alias names (alias by default for all assemblies is "global", but I changed it to vSphere5 and vSphere6 for each version. Then at the top of each class file before all with what I'm doing:

  extern alias vSphere5;

  or

  extern alias vSphere6

  (According to what project I'm in). Then, use the using statement for each class file that interacts with vSphere using vSphere5::Vim25Api; or using vSphere6::Vim25Api; to use the files to correct/stub namespace for each version I support.

  However this still doesn't seem to work, and things seem to be getting confused upwards somehow. I take a guess that internal files make calls and somehow have crossed.

  Is it possible to use two stub version of vSphere together different files in the same project? How should I handle my script? I thought of just upgrading to use the version of vSphere 6 (I can always connect to vCenter 5.5 using these, but some of the properties on the object have changed, (for example some dynamic properties on AlarmObjects and other items have been removed and code breaks if I delete the references to the stub vSphere 5.5 files.) So, I want to keep two different versions and use each of them separately in the same solution, so I support vSphere 5.5 and vSphere 6.

  Solved - this using wsdl.exe and just by specifying a different namespace to use in the proxy class that is generated by using the /n switch.

  for example using PowerShell to build automatically, the value $VimApi and do:

  WSDL.exe/n:$ VimApi...

• How can I add two different colors on the same object?

  Hello

  Say if I have something that I have a circle and I want the black semicircle and the other half with white. How can I do this?

  Thank you

  actually, sorry, forget something: you can fill it with a gradient that has two color stops in the same place. It is maybe a little more ordered according to what you need.