problems with a collapse of the books in the .chm files

Similar Questions

• Problem with Windows Explorer and the recorded files

  When I save files from the internet and then open the folder with Windows Explorer in the backed up files, I find that WE consider not save them on my hard drive "change" more. I know it's strange, but I tend to retain files roughly in the order that I saved them, rather than by the name of the file or anything else. So now to manually change the files in a certain way, then save them to get them organized as I want. Of course, this can become very painful and long if I have a lot of files to organize this way. My question is: How can I get Windows to consider saving a file on my HDD as change? I use Firefox and updated recently, which may be the cause of the problem.

  Hi Flingle,

  Were you able to save and access files correctly before you update Firefox?

  You can create a new folder & try to download the file inside of Internet Explorer & check if the problem persists.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with 2 wires to the same file

  I have a processing thread and a thread detachment.  The processing thread generates XML files and places them in a directory under/user/home.  The XML files are not large, generally less than 2 KB.  When the message is complete, it deletes the XML file.  Sometimes, he won't delete them.  If I navigate to the file and try to remove, he says that it is still in use.  I can't understand how it goes because it is not consistent.  My best guess is that the display thread accesses the file before it is closed by the saving thread.  The saving thread does not release the file so that the display thread cannot remove it.  She keeps just the view of the same file.  I have the file register a temp, it writes the data and closes the output stream and then renamed with an extension and quits immediately.  The message thread is set to filter by this extension.  I tried debugging on the device but it is inconsistent and I meet in debugging.  I let it run all night with no problems.  Disconnected this morning and 10 minutes later, I got stuck 1.  The others were very well, it's only 1 file.

  How can I avoid this? Can I release the file between the detachment thread locks?  The API to rename said it empty and closes all open them the flow of input/output and the original file no longer exists.  If I caught in the message thread and renamed it (since there is no additional data to write) which will work?  I worry about zombie save son or other file system problems.  I couldn't find a way to get an exclusive lock on a file.  Maybe I'm going about this all wrong.

  Unsynchronized access to the file, the code that you use to write/delete the file

• Problem with redirect after save the wav file

  I have a photo booth / audio that we created with flash that take a photo and record then it records audio testimony and records it.  My problem is that, once the wav file is saved, I want to redirect them to a thank you page but can't seem to find a way to do it.  Here is the code that I use to manage the registration of the wav file.

  private void recordComplete(e:Event):void

  {

  var request: URLRequest = new URLRequest ("save - file.php '");

  var loader: URLLoader = new URLLoader();

  request.contentType = ' application/octet-stream ";

  Request.Method = URLRequestMethod.POST;

  Request.Data = recorder.output;

  Loader.Load (request);

  navigateToURL (new URLRequest (redirectPath), "_self")

  }

  I tried to add the navigateToURL at the end and it sends to this page correctly, but the wav file is not saved.  I was wondering if there was a way to determine that the file is saved and then redirect to a thank you page?

  Thanks in advance!

  -justin

  replace

  public var redirectPath:String = "http://localhost/thankyou.html";

  with

  not sure that this should be public but it won't matter for testing.

  public var redirectPath:String = "http://www.adobe.com";

• Problems with duplicate DATA when the data file was added after the backup completes

  Hello
  
  I am facing a problem when running of duplicate database with the command of database duplicate RMAN on a 10 g database. If I have the duplication from a full backup that is missing a data file that has been added to the database after the full backup of preforms, I get the following error message:
  

  Starting restore at 10-10-2009 18:00:38
  
  released channel: t1
  released channel: t2
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Duplicate Db command at 10/10/2009 18:00:39
  RMAN-03015: error occurred in stored script Memory Script
  RMAN-06026: some targets not found - aborting restore
  RMAN-06100: no channel to restore a backup or copy of datafile 43

  Redo log which was Pond at the time of the creation of 43 of the data file is also available in the backups. It seems that RMAN cannot use the log information archived redo to restore the content of the data file 43. I guess that because failure is already reported in the RESTORATION and not in the RECOVERY phase, so again the archived logs are not available yet. I get the same message even if I do another backup of the data file 43 (so a backup that is not in the same backupset as the backup to all the other data files).
  The script, the command duplicate product, I guess that RMAN reads the contents of the source database controlfile and trying to get a backup that contains all the data files to restore the database Assistant - if such a backup is not found, it fails.
  
  
  Of course, if I try to perform a restore/recovery of the source database, it works without problem:
  

  RMAN> restore database;
  
  Starting restore at 13.10.09
  using target database control file instead of recovery catalog
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid=156 devtype=DISK
  
  creating datafile fno=43 name=F:\ORA10\ORADATA\SOVDEV\SOMEDATAFILE01.DBF
  channel ORA_DISK_1: starting datafile backupset restore
  channel ORA_DISK_1: specifying datafile(s) to restore from backup set
  restoring datafile 00001 to F:\ORA10\ORADATA\SOVDEV\SYSTEM01.DBF
  .....

  The 43 data file is re-created and then redo is applied to the course.
  
  So, does anyone know if the duplicate database can use archived redo logs to recreate the contents of a data file, as does a normal restore/recovery? If this is the case, then it is necessary to perform a full backup before each duplicated if a data file has been added after such a backup database.
  
  Thanks in advance for any answers.
  
  Kind regards
  Swear

  Hi swear,.

  I got exactly the same problem during replication.
  Because we backup archive logs every 6 hours with rman, I added an additional block of running this script.
  run
  {
  backup incremental level 0
  format "% d_ % s_ %%t p_ bk_ '.
  filesperset 4
  database not saved;
  }

  (I also hit a bug in the catalogue which was resolved by patching up the dbs catalog 11.1.0.6, 11.1.0.7 for.)

  This will restrict the data not making file not part of any backup rman 6 hours while jumping for which there is already a backup of data files.

  Kind regards

  Tycho

• Problem with virtual pc, open the vhd file

  Earlier, I worked with virtual pc very well on xp.

  later, I deleted some of the .net etc... Associates of the programs of the Control Panel on the local computer
  and I deleted the computer virtual and installed again.
  But now we get an error windows cannot open this file?
  Choose a program from the list etc., opening the vhd image
  can u make clear which program is deleted and what software must be installed

  Please post on the forum PC virtual dedicated listed below.
  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  Thank you

• my computer will not install itunes 10.5, it tells me "Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2330.

  original title: Itunes problem

  my computer will not install itunes 10.5, it tells me "Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2330. "What should I do?

  Contact the manufacturer (Apple) of the application (iTunes) you are having problems with.

  Uninstall all previous versions, try to download (re-record not running) and then do a right click on it and RUN AS ADMINISTRATOR.

  (Vista 32-bit or 64-bit)?

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• Problem with silverlight download, download the error code 2104.

  Original title: problem with Sliverlight download
  get the error code 2104. tried to uninstall and reinstall

  Hello

  Thanks for the reply.

  We are pleased to know that the problem is solved. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows. Please contact the Windows community.

• I have problems with my application of the java language.

  I have problems with my application of the java language. It will be open only for about one second, and it won't let me write all programs, it looks like the command prompt when opening. what the * is underway and what can I do to solve this problem.

  Hey Kevin,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it.

  I would really appreciate if you could answer the following questions:

  1. is the specific question of the application of the Java language?

  2. did you of recent changes made to your computer before the show?

  3. you receive an error code or message?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  If the problem is specific to the Java application, then I suggest you to contact Java support from the links below:

  http://www.Java.com/en/download/support.jsp

  Java Help Center:

  http://www.Java.com/en/download/help/

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• I have problem with value NULL when the use CASE statement please help this question

  I have problem with value NULL when the use CASE statement please help this question

  
  

  Table: digital_val

  SNO cl C2

  1 San1 11

  2 22 San2

  Actual result: expected to A         B

  A            B                                                                           11        22

  11 NULL

  22 NULL

  
  

  
  

  query:

  Select case when c1 = "san1" then c2,.

  case If c1 = "san2" then c2 B

  of digital_val

  I'm more curious why, when you select 2 rows, you expect a result of row?

  WITH digital_val

  AS (SELECT 1 AS 'Sno', 'San1"C1, c2 FROM DUAL 11)

  UNION ALL

  2 SELECT AS 'Sno', 'San2"C1, c2 FROM DUAL 22)

  SELECT CASE WHEN c1 is "San1" THEN END AS A c2.

  CASE WHEN c1 = "San2" THEN END AS B c2

  OF digital_val;

  With no other input, if you select 2 rows, you get 2 rows.  One of the other solutions use a max function, but is this really what you want, does not specify?

• Bridge does not open? Initially the 8.1 Win & problem had started. Have now earn 10 & still a problem with not to open the bridge?

  Bridge does not open? Initially the 8.1 Win & problem had started. Have now earn 10 & still a problem with not to open the bridge?

  Hi Matthew,

  If you use Bridge CC, update to the latest version 6.2. Adobe Bridge CC 6.2 version now available! Adobe content corner

  1. Please, do a right-click on the bridge on the desktop icon and select "Run as Administrator".
  2. If this does not help, reset the Bridge preferences and then try it.

  Steps: -.

  Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

  Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

  Let us know if it works.

  Kind regards

  Assani

• problem with bind variables in the SQL query view object

  Hi all

  I use JDev 11.1.2.4.0.

  I have a problem with bind variables in the SQL query view object.

  This is my original SQL

  SELECT sum(t.TIME) , t.legertype_id
  FROM LEDGER t
  WHERE t.nctuser_id = '20022' 
        AND to_char(t.insertdate,'YYYYMMDD') in ('20130930','20130929')
  group by t.legertype_id
  

  In my view .xml object query tab, I am writing this

  SELECT sum(t.TIME) , t.legertype_id
  FROM LEDGER t
  WHERE   t.nctuser_id = '20022'
      AND to_char(t.insertdate,'YYYYMMDD') in :dddd
  group by t.legertype_id
  

  Davis here is a variable of Type liaison: String, updatable and necessary.

  I try to deal with Davis as ('20130930 ', ' 20130929') hoping the view object, run as my original SQL.

  But failed. The view object retrieves 0 line after that I run.

  Why?

  Thank you! ('2original SQL0130930', '20130929') ('20130930 ', ' 20130929')

  A variable binding cannot be used as this is why you must use years table. Check decompilation binary ADF: using oracle.jbo.domain.Array with ViewCriteria to see a solution.

  Timo

• Which is wrong with this reading of the audio files...! ???

  Hi all

  I try to read two different audio files with the following code piece. individually, they play well. When I try to play at the same time which is at the same time, it is give IllegalStateException and does not play any audio file.

  When I play them separately, they play well. My requirement is to play 1 file as background music and another as foreground.

  Audio playback code.

  public class Audio implements Runnable//extends Thread
  {
      private Class clazz;
      private InputStream is;
      public Player player;
      private String audiofile;
      private int fileType;
      private int mode;
      public Audio(String path, int type, int mode)
      {
       audiofile = path;
       fileType = type;
       this.mode = mode;
      }
      public void run()
      {
                     //this sample demonstrates playing an MP3 file that has been
                     //added as a resource to the project
  
                  try
                     {
                        //retrieve the MP3 file
                        clazz = getClass();
                      //create an instance of the player from the InputStream
                        is = clazz.getResourceAsStream(audiofile);
  
                        // 1-- mpeg, 2-- wav audio files
  
                        if(fileType == 1)
                            player = javax.microedition.media.Manager.createPlayer(is, "audio/mpeg");
                        else if(fileType ==2)
                            player = javax.microedition.media.Manager.createPlayer(is, "audio/x-wav");
                        player.setLoopCount(mode);
                        player.realize();
                        player.prefetch();
                        player.start();
  
                      } catch (Exception ex)
                      {
                          UiApplication.getUiApplication().pushScreen(new CloseScreen("Hello"));
                      }
              }
  }
  

  // if call this, commenting section2 it works well
                 //section1
      Audio at = new Audio("/neon1.wav",2, -1);
      Thread at1 = new Thread(at);
      at1.start();
  
  // if call this, commenting section1 it works well
                 //section2
          Audio at3 = new Audio("/neon1.wav",2, -1);
      Thread at2 = new Thread(at3);
      at2.start();
  
  // when i uncomment both section1 and section2 and execute it is not playing giving an exception IllegalStateException.
  

  all aid should be of great use.

  Thank you and best regards,

  PraveenG

  On the storm, it is not possible to play 2 sounds loaded from a file at a time.  If you try this, the first sound stops and the second sound will be played.

  You can, however, load and play a sound (background music) and play other sounds (sound effects) by using Alert.startAudio ().  The first noise not would be cut.  The only problem with this is that the Alert.startAudio sounds are not the best.

• In RoboHelp 2015, are there changes with regard to the CHM files?

  I would like to know if there is a significant change for CHM files.

  The only option that I use for output is Microsoft HTML Help to generate CHM files. I can't use other (WebHelp and etc.).

  Well, I use the demo version of HR 2015 but I did not notice a significant change regarding the CHM files.

  The dynamic filter is not applied to it. I am currently using RoboHelp 9, so I ask you to these changes because I'm thinking that if it's worth changing HR 2015, because I use the output HTML, I only generate CHM files.

  I am trying to compare the two versions and I try to note their differences, but if you know some that it would be useful for me.

  Sorry if I make mistakes, because English is not my mother tongue. Thanks in advance!

  Hello, Camila

  Your English is very good! Yes, dynamic content filtering is only available with the latest reactive HTML5. Available for CHM output functions are mainly dictated by Microsoft because the format of HTML (.chm) help is their owner specification.

  RoboHelp has added a few things on top of the base CHM (skins for CHMS, glossary and browse sequences, etc.), but you won't find many features more modern in CHMS because Microsoft has continued to develop a long time ago.

  That said, while the CHM format may not have a lot of bells and whistles that you hope to, the new 2015 RoboHelp has many other advantages that make it easier create and justify an upgrade.

  Thank you

  John Daigle

  Adobe Certified RoboHelp and Captivate instructor

  Evergreen, Colorado

  www.showmethedemo.com