HP Pavilion g6: advancing after the HP start screen

Similar Questions

• Windows 7 crashes 5-10 minutes after the game starts!

  Whenever I load my games that all crash after 5-10 min I have all new drivers and all games are compatible... PLEASE TELL ME WAT I'M DOING

  Hi LZYGA09,

  1 you get an error message before or after that you get the black screen?

  You can try the following workaround to find the root cause of the problem:

  Please check if you are facing the same question when working in safe mode.
  Step 1.
  1. reboot your computer.
  2. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  3. using the arrow keys, select the desired option of Mode safe.
  4. press the Enter key on your keyboard to start in safe mode of Windows 7.
  5. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  6 do whatever tasks you need and when you are done, reboot to return to normal mode.

  Step 2
  If the question had existed in Mode safe, make the boot minimum troubleshooting to find the root cause of the problem:
  Clean clean boot:
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  8. in addition, you will need to uninstall and reinstall the software problem on your computer.
  Reset the computer to start as usual
  9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  11. When you are prompted to restart the computer, click on restart.

  2. I recommend you to run online Virus Scan to remove any infections, as appropriate.
  Follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm The following thread discusses the removal of viruses and malware online:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry Smartphones Blackbold does not start after the progress bar screen. any help

  I have a problem with my blackberry bold 9700. When I reboot, the next screen that comes after the progress bar screen is my network name of phone, and nothing happens. I get a screen of "vodafone" with their logo.  nothing happens after and I am not able to access blackberry. What's wrong. any help on how to run again

  Hello and welcome to the community!

  I recommend that you try to start safe mode:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

  If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

  Good luck and let us know!

• After the system starts. I get the error message; "" Unable to start Bluetooth stack service "from BTTray.

  After the system starts. I get the error message; "" Unable to start Bluetooth stack service "from BTTray.

  Pls I need help to resolve this error message.

  Concerning

  Unfortunately, this model laptop has a Broadcom bluetooth device or a device of Atheros.

  Try to install the Atheros driver first because it is more common.  If it isn't an Atheros card, Setup HP rejects the update indicating no match of material.

  If this isn't Atheros, install the Broadcom bluetooth driver.

  Here is the page of the driver for your laptop and Windows 7 64-bit.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5218666#n311

  Bluetooth drivers are in the category network drivers.

  Let me know what happens.

• Satellite P300 itself keeps restarting after the initial splash screen.

  My Satellite P300 itself keeps restarting after the initial splash screen.

  Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

  That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

  Any help or advice would be much appreciated.

  Post edited by: aic-poppy

  Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
  To start the laptop in safe mode and let us know if it works, try it please.

• Screen goes black after the log on screen and works fine in safe mode.

  Original title: black screen.

  dv65 Pavilion my laptop starts up, but the screen goes black after the log on screen, judging by its instllation it works, but not the screen. It works very well in SafeMode so. Laptop is 3-4 years. I tried to connect it to my TV but she copy behavior laptop screen. Because of this problem, I had to return to the State of the plant 3 times this month. Plese help!

  Hi Avint,

  Glad to know that you were able to resolve the issue and thank you for sharing information.

• T400 does not start after the first display screen

  What is going on? I have wss to work today and my computer shut down due to the low batt. I got home and plugged in and waited a few minutes and turned on. When I checked swipe my fingerprint, all that I saw the first startup screen told me I want to interrupt normal off set up that I can close the button think vantage. It is stuck there. I can activate it on and but it does not start after that screen. What can I do? I am in the middle of the drafting of the report and cannot access my docs!

  I looked the problem and found that have been in contact with the usb pins! Yay the prob is fixed!

• You can save a broken computer? My computer does NOT start after the blue hp screen.

  In the past months, my computer has been the object of a freezing randomly, and Ctrl + Alt + Delete does not work. I stopped him via the power button. Sometimes, when I start it again, the computer moniter shows nothing but a black screen and the computer sounds different when it starts normally. When this happens, I turn it off again hit the left side of the desktop and turn on again. Whenever I do this, the computer starts normally, and I go on the computer use.

  Yesterday morning, after a break of 2 days, acess my computer and it is random freezing thing once again. I force close down as one normally do, and the computer does not start and displays the same black screen and the same fan/air weird sound. I stopped him and I hit the side RIGHT this time, I think and when I turn on the computer, the usual blue HP screen appears with the establishment, boot, diagnostics and system recovery things. HOWEVER, after this screen, a black screen will appear with this weird blue symbol on the upper left corner, I have never seen this and it looks like a circle with a triangle and a Pentagon below and it remains essentially on this screen forever. When I try to hit the establishment, boot, diagnostics and the shortcuts to system recovery, on the lower left side of the screen, it says "Menu boot loading...". ' or whatever the shortcut of loading represents, but nothing ever happens. When I press the other keys, this tapping noise comes from the computer at each tap of the keyboard.

  I have no idea what to do, and at this point, my first priority is to save important files on the computer. Does anyone know what is the problem? I want her more than a problem of system rather than a virus problem because refusing the boot black screen thing lasts for years. My computer is 3-4 years. I enclose a sketch of what looks like the weird symbol.

  

  MY COMPUTER WORKS NOW!

  With the flash drive, I was able to access the BIOS, which before, I couldn't.

  Eventually my computer was in some strange sort of lockdown setting, I switched it back to activate and now its work! I remember save important things in the future. Thank you very much for your help!

• HP Pavilion P6724IT: Hp Pavilion P6724IT stuck to the HP splash screen after the installation of the new VGA

  Hello people.

  I buyed a new VGA, a Gigabyte GT740 2 GB DDR5, before I had an Asus GT630 2 GB of DDR3 memory and had no problem with it.

  After you mount the new VGA, I noticed that the computer gets stuck to the initial start with the HP logo screen.

  Can't even get to the BIOS, but if I remove the card and use the igpu it is all ok.

  I tried to update the bios with the latest version on the HP website (v.7.15) and nothing.

  Tried to install it with Windows 8.1 and windows 7, nothing.

  I tried all the things I found on the net of people with the same number, nothing new.

  If I'm pretty quick and I press certain keys we Gets the black screen and stuck in any case, do a few beeps and then go to a kind of sleep and if I keep pressing a key, it makes little noise Cracklin'.

  In fact I can't afford a new motherboard so I wanted to know if I can find a solution to the problem, because it's really frustrating and I spent much time trying to understand with your help.

  Sorry for my bad English!

  Hope someone can help me

  See you soon

  @wb2001  Thank you for asking me to review this theread.

  ZeroProsekt,

  You must answer such questions as published by the wb2001.  If you do not know the answers, then contact the manufacturer of the graphics card and ask for more information on the graphics card of specific model you are trying to use.

• Error "Windows has stopped this device because it has reported problems (code 43)" after the computer start in low resolution and remains after the connection

  Original title:

  Problem occurs intermittently, but almost every time at the first start the morning. The problem can be seen during the POST and the rest after logon. After several reboots, he can come good, but at the next restart could be bad. One clue is that the Device Manager said that to display card NVIDIA Ge Force 8400 GS that "Windows has stopped this device because it has reported problems (code 43)." Driver update says I have the latest driver insalled, version 8.17.12.9573. Help, please

  Have you tried to update your BIOS? Are there updates the firmware for your video card?

• Mosue does not work after the computer starts

  OP: THE MOUSE CLICKING ON ITSELF AND THEN NOT WORK AT ALL AFTER MY COMPUTER STARTS. WHAT IS THE PROBLEM WITH MY COMPUTER?

  When I start my computer my mouse works fine for a minute or two, and then it starts clicking by himself out of control. I see the icon at the bottom of my computer screen touchpad flashes when it clicks and then after that it snaps really crazy for a few minutes, he clicks on the bottom and it wont let me click all. Its the equivalent of one person pushing the left clicker where I can't do something... someone help me please! BTW, I have a dell vostro, which is only a little more than a year that has windows vista if that helps at all.

  Hi fireflyz19,

  Thank you for your message.

  I suggest you go to the manufacturer's Web site to download the drivers.

  Here is an article that gives more detail how, see the section "manually update drivers":

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavillion DV5-1234SE does not start after the HP splash screen

  I have a HP Pavilion DV5-1234SE, which will not load Windows.

  It worked very well, I have stop him - and when I tried to start the next time, be put in place - but will only pass the first black screen with the HP logo. I'm trying to access the start menu, and tried to start in safe mode - but it will not go beyond the black HP screen.

  Any suggestions?

  Thanks for the suggestion. I ended up taking to someone and it turns out that the motherboard is fried. (Greaaat!)

  Rather than waste $350,00 replacing I'm just going to get a new laptop (not HP).

• SOLUTION EXPLORER. EXE must always run at the start of the TASK MANAGER after the LOGIN/WELCOME screen.

  Trying to restore the empty desktop icons by the recommendations, I have a white screen with a pointer after login and WELCOME screen.  CTRL-SHIFT-ESC gives me the TASK MANAGER. and I returned 'explorer.exe' I then the full desktop with white icons.  I need to do this every time I have start or restart the PC. I checked the regedit and the only entry to WINLOG, SHELL is "Explorer.exe" any ideas about a problem?  Thank you!

  Hi Eric1029,

  You can check if the following registry entries are correct.

  a. open the start menu, in the search bar type regedit, and then press ENTER.

  b. navigate to the following location and check the entries for "Shell" and "Userinit" on the right pane:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  "Shell" ="Explorer.exe" (REG_SZ)

  'Userinit"="C:\WINDOWS\system32\userinit.exe '.

  c. also check if you have the correct permission for this registry key (winlogon)

  d. right-click and select permission. Make sure that at least with that you have group administrators, system and installer of confidence with full control and users group read permission.

  e. check if you are able to launch explorer.exe in the window running in the Task Manager.

  Important: The above method contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Screen goes black and white after the computer starts.

  Original title: after starting Windows 7 everything is OK for a minute, then suddemly the screen is white and white and I Pascal t do anything or get into programs.

  After the start of Windows 7, everything is OK for a minute or two, then all of a sudden the screen goes white and blank and I can't move forward.  If I disconnect and try again.  Don't get into F8 either.

  Hi Eunice,

  Pilots, conflicts with other programs, malicious software and memory can cause starting problems.

  1. did you of recent changes on the computer before this problem?

  2. What is the brand and model of the computer?

  
  Method 1:
  We will first of all disconnect all external devices except the keyboard and mouse, if necessary and see if the problem is resolved.

  Method 2:
  If the problem persists, you can start the computer to the last good known Configuration and check if that helps.

  Using the last good known Configuration
  http://Windows.Microsoft.com/en-us/Windows7/using-last-Knofwn-good-configuration

  Method 3
  If the problem persists, I suggest to perform a startup repair and check if that helps.

  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• iMac restarts after the first start since 10.11.6

  Hello

  Since updating to OS X 10.11.6 my mid 2010 27 "iMac (iMac11, 3) restarts after a few minutes of availability.

  It happens right after a few seconds.

  The screen goes black, and then it displays this message. After the reboot, everything works fine.

  

  Please post a report of EtreCheck of your system if you can get it to boot. Then we can consider for obvious questions that may be causing your problem.

  A cause can be if you have any antivirus, cleanup or third-party maintenance utilities installed. Do you have?