Problems with boxes and slide do not pause.

Similar Questions

• Problem with VCenter, and VM of not listed in the use of resources

  We recently had a problem with a power being pulled cable and now things are a little twisted...  We had to reboot our servers (ESX1 and ESX2) ESX and VCenter.   ESX1 said that HA had been disabled and restarting didn't help, so we chose the command to 'Reconfigure for VMWare HA'.

  And now, after he reconfigured, it's what we have: ESX1 12 virtual machines on it, and ESX2 4.  ESX2 shows consumption of the normal resources of the virtual machines that are on, however, ESX1 says that there are 3 VMs on, but none of them use ANY resource.

  I've attached a screenshot of what I'm going to have to explain.  It is not sensible.  I can connect to the VMs that are lit on ESX1 3, but as far as VCenter is concerned, they are not using any CPU or mem...

  Any help, ideas or whatnot would be greatly appreciated!  Thank you!

  M

  -

  ---

  Windows is a true multitasking operating system... It can START and LOCK at the same time!

  a few other things you can try would be to shut down a virtual machine, remove from the inventory, then "add to the inventory.

  .. .or restart your vCenter Server Service.

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I have a problem with creative cloud applications is not to be downloaded or updated date on my i mac, current applications, I still have work. I uninstalled the cc application and re-installed but without success, in the apps tab there is no error code o

  I have a problem with creative cloud applications is not to be downloaded or updated date on my i mac, current applications, I still have work. I uninstalled the cc application and re-installed but without success, on the applications tab there is no code error only saying download error out area allowing you to charge applications call does not work... any suggestions?

  Hi James,

  Please follow the article: CC help | Download error in the applications tab of Creative Cloud Desktop Application to get this fixed number.

  Please let us know any questions.

  Thank you

  Yann Arora

• I installed Adobe CS6 Design & Web Premium on my Mac Book Pro a few years ago, but repeatedly encountered problems with programs freezing or do not open correctly. It is a students and teachers version so a University identity is required, but I'm

  I installed Adobe CS6 Design & Web Premium on my Mac Book Pro a few years ago, but repeatedly encountered problems with programs freezing or do not open correctly. It is a student and teacher license version so a University identity is required, but I'm no more a student - can I always reinstall it from my academic ID may no longer be valid?

  Erin Elzo as long as serial number has been registered under your account at http://www.adobe.com/ , then you should be able to continue using the software.  You can find details on how to locate your serial number registered to find your serial number fast - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

• I can't bid on firefox or explorer. I place the cursor in the quote box, and it will not record the numbers. Can someone please help?

  I can't bid on firefox or explorer. I place the cursor in the quote box, and it will not only record the numbers. Can anyone help please thanks

  Problem solved. My husband came and noticed that the number lock has been deactivated. I can't thank you enough for your help. Hope my solution helps someone else with the same problem.

• Problems with clicking and scrolling when you are using the mouse in IE

  Separated from this thread.

  Original title:

  Problems with clicking and scrolling when you are using the mouse

  I have the same problem.  My touchscreen responds but my touchpad and mouse are unable to save a click in IE.  I need to reboot to rectify.  It seems to be more common when the laptop comes out of fashion 'sleep'.   I tried all the steps above, everything is up-to-date.

  Hello Fred,.

  Thanks for the reply.

  I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check. Please follow these steps:

  a. press Windows + W keys, type Troubleshooting in the search box and press on Enter.
  b. click on 'show all' and then click 'hardware and devices'.
  c. click 'Next' and then follow the on-screen instructions.

  If this does not help, then use method 2.

  Method 2:
  Start your computer in safe mode and check the number.
  Refer to this article:
  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• problem with drag and drop

  Hi I have a problem with drag and drop I have 2 clip and I have 2 target, I want when I drag the clip 1 to 1, target 1 to target not accepts the clip2, clip 2 can therefore be enjoy to target 2. (target 1 can accept clip 1 and clip 2, target 2 can also clip accepts 1 & 2)

  Stone

  clip_piere.addEventListener (MouseEvent.MOUSE_DOWN, dep_piere);

  clip_piere.addEventListener (MouseEvent.MOUSE_UP, arreter_piere);

  clip_piere.buttonMode = true;

  var x_piere, y_piere:Number;

  x_piere = clip_piere.x;

  y_piere = clip_piere.y;

  function dep_piere(event:MouseEvent):void

  {

  clip_piere.StartDrag ();

  }

  function arreter_piere(event:MouseEvent):void

  {

  If (place1.hitTestObject (clip_piere): place2.hitTestObject (clip_piere)) {}

  clip_piere.stopDrag ();

  clip_piere. RemoveEventListener (MouseEvent.MOUSE_DOWN, dep_piere);

  } else {}

  clip_piere.x = x_piere;

  clip_piere.y = y_piere;

  clip_piere.stopDrag ();

  }

  }

  EAN

  clip_ean.addEventListener (MouseEvent.MOUSE_DOWN, dep_ean);

  clip_ean.addEventListener (MouseEvent.MOUSE_UP, arreter_ean);

  var x_ean, y_ean:Number;

  x_ean = clip_ean.x;

  y_ean = clip_ean.y;

  function dep_ean(event:MouseEvent):void

  {

  clip_ean.StartDrag ();

  }

  function arreter_ean(event:MouseEvent):void

  {

  If (place1.hitTestObject (clip_ean): place2.hitTestObject (clip_ean)) {}

  clip_ean.stopDrag ();

  clip_ean. RemoveEventListener (MouseEvent.MOUSE_DOWN, dep_ean);

  } else {}

  clip_ean.x = x_ean;

  clip_ean.y = y_ean;

  clip_ean.stopDrag ();

  }

  }

  Here is a link to a file that I did for you based on your objects and what I described in my last answer.  I reduced the code so that the
  the objects share the same functions.  I moved the MOUSE_UP listener on stage so that it is less prone to failure should drag you the object when slide it / drop.

  http://www.nedwebs.com/Flash/AS3_Drag_Targets.fla

• Is there a problem with ValueChangeListener and af: table?

  Hello...
  
  I use JDeveloper 11.1.2.0.0
  
  Is there a problem with ValueChangeListener and af: table.
  
  Here my problem...
  
  I have two inputtext in af:table and I want to change the value of inputtext2 when I change the value of inputtext1
  so I put the autosubmit = "true" to inputtext1 and set the valuechangelistener method that is in the page bean
  and I put the partial inputtext2 trigger = "inputtext1 id".
  
  but when I run the page and change the value of inputtext1 that nothing happens.
  
  But if I have the previous scenario in af:panelFormLayout instead of af: table its work and the value of inputtext2 is changed to the user.
  
  any ideas...
  
  Thans.

  Sorry for the delay... :(

  And why if I use page JSF is the binding property disappears
  in the tab advanced in the property inspector.

  If you cannot power discovered the binding property in the palette of the means, your jsff page is automatically linked.
  If only the problem.

  try to create the new page jsff, while creating jsff, finally there is radio box something like
  do not expose the UI components automatically. check and create.

  and create a java file. Then you can bind components with the java file as you wish.

  to check your jsff page is autobinded are no means?
  Open your jsff page.

  Menu's that are on it - in this section. You can see the design menu that struck. If you hit it means you see Wizard property page go to the tab component binding
  There is a check box available

  If the box is ticked means that you page are automatically linked. If this isn't the case, you must link.

  -edited lately.

• curious problem with extrusion and rotation

  I found a curious problem with extrusion and turn into the CS6. It's not a bug, but it's a behavior that is less intuitive who is confused and sometimes painful. I think it is something that should go on the list of tasks for the devs. Someone else, right? Don't agree?

  Example:

  

  I started with a path arrow, to which I applied the effect "extrude". I then put an icon on top of the arrow and grouped in the icon and the arrow. Now, I use this icon arrow in several different parts of my design, in different orientations. I flip the arrow, the relative position of the icon and the arrow seems to pass. I believe that this is happening because when you rotate the arrow icon, Illustrator rotates both the icon and the arrow on the center of the underside of the arrow. This is because the upper side of the arrow is essentially fictitious, just an artifact of the effect of extrusion. So, even if the icon appears as if it is drawn on the upper side of the arrow, it behaves as if it is attached to the underside of the arrow. When you apply a transformation, this transformation impacts on the underside of the arrow, causing the top of offset from the icon.

  The solution would be to add an extra box to the effect of extrusion, asking if you wanted to extrusion (the way things are currently done) upwards or downwards. If you can extrude downwards, then the upper side of the arrow would be the 'real' face, those affected by the changes. You can then put a picture on the top, the arrow and the image of the group, and when you apply a transformation, the icon would remain fixed relative to the top, which would be consistent with your intuitive expectations.

  If anyone is curious to experiment with this particular example, I posted this file in Google Docs here:

  https://docs.Google.com/file/d/0B0Hoxcl5zTEtTXo5QnNsMGwwOGc/edit?USP=sharing

  It's about what you just mount the image with a transformative effect to match the extrusion.

  So basically, you apply a 3-d rotation effect to your image to match the rotation of your arrow, then you apply a transformation movement in the vertical axis to match the height of your extrusion.

  hope this helps

  https://docs.Google.com/file/d/0B4ilRoSBagc3d2w2Ylc2cWxFVjA/edit

  If you want to get real on this issue retro we only corresponding to the rotation of the arrow in the center of the extrusion, if we wanted to distort the image perfectly, the rotation should be slightly higher, but anyway, it is hardly noticeable.

• I have problem with wifi iphone 6 s not connected...

  I have problem with iphone 6s more wifi not connected...

  I'm having the same problem and tried all the fixes I found online and nothing has worked so far.

• Problem with IMovie and Quick time

  Hey everybody,

  I am faced with an unexpected problem with Quicktime and I Movie, and I was wondering if someone had already known that:

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  Could someone please help me solve this problem?

  Thank you very much in advance.

  Concerning

  Could someone please help me solve this problem?

  Not only based on what you already said.

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  How would you"merge" files? (I.e. a "QuickTime" format is any form of data compatible with the platform of supply and the specific structure of QT incorporated into real employment that is stored in a container of MOV file on any of up to 99 tracks possible). Also, what app do you use for reading the file 'merged '? (For example, some media players ignore secondary audio tracks as a result of some methods of 'fusion' of files so it is important to know how the files are "merged," whether or not the audio data are "scattered" several tracks, and/or if the Media Player supports playback of multiple, sequential audio popular.)

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  The specific codecs and settings using the specific version of iMovie? (The current Mac OS X operating systems have two X QT and 'classic' Qt integrated structure so it is important to know what structure is used here and how).

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  As a general rule, you should review the file "merged" to determine why it does not play back correctly rather than comparing the characteristics of the source being merged files. The main problem here seems to be in your project workflow. That is, you seem to be when you perform an operation in two steps rather than edit several iMove multimedia files and then export the combined results in a video the video and audio tracks have been flattened and exported in standard compression formats with unified settings, features and the.

  

• problem with Safari and the opening of sites

  problem with Safari and the opening of sites

  Please describe the problem in more detail?

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• Is anyone able to run Adobe CS5 with El Capitan now? I've read about problems with Illustrator and photoshop, but these seem to be in 2015 Octobe5. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5.

  I've read about problems with Illustrator and photoshop on EL Capitan, but these seem to be in October 2015. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5. Can not afford to go to CC. I have a Macbook Pro.

  CS5 and 10.11 are not supported and will never be supported by Adobe or Apple.

  However it works for some, more actually, but not all. There are sporadic problems with Illustrator, Photoshop seems to be the best. Do not expect an improvement and keep in mind that anyone from Adobe, Apple or anywhere else will fix it.

  Do a clean install

  Make sure you have the Apple Java

  h ttps://support.Apple.com/kb/DL1572?locale=en_US

  Make sure you have your serial number and if you are having problems with the serial number or the serialization however adobe of web server will not support your problem.

  update the application via photoshop.

• problem with java and pogo games

  I use mozilla, and now with the problems with java and hackers cannot play my pogo, what can I do? I disabled my java I tried java 6 does not work or is not safe, what is a safe way to play games on pogo using java?

  Pogo.com is determined as a website SAFE to use Java with Mozilla Firefox?