Problem with VCenter, and VM of not listed in the use of resources

Similar Questions

• Plug-and-play is not listed on the list of services

  I am running Vista; USB, camera and microphone don't work; did some research and found the plug and play service is not listed on the service list so I guess that is not currently running.

  How to start the service?

  Hello

  ·         When you connect a USB device to the computer it gets detected?

  ·         You receive an error message when you connect a USB device to the system?

  I suggest you try the methods provided below and check if they help to resolve the issue.

  Method 1:

  See the link below and run the fix it tool, or follow the Troubleshooting Manual for solving problems with USB devices in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2:

   

  Make sure that the plug and play Service is set to automatic and started. To do this, follow these steps:

  one), click Start-Run, type "services.msc", click on OK.

  (b) when loading the Services window, navigate to the 'plug and play', double click on it to open it,

  (c) make sure that the "Startup Type" says "automatic"and has begun.» If it isn't, use the drop down menu to change.

  "(d) if she once said:"Automatic", then click on the "Recovery" tab at the top, change the first"

  Line for "Restart the Service" failure", then click on" "apply ', then OK. "

• Firefox 36.0.1 problems with addon and MP sent after notification of the firewall on Win7

  Yesterday, I had a problem after clicking on 2 or 3 times to open the firewall et seq. asked to unlock even if I did a long time ago. I'm not an admin, but I know that the local administrator password that allows me to put things in the control panel. After what's happened alert HitmanPro cannot load on FF opening; PIX downloaded with Picture Picker addon are not saved in the destination folder, even if the message indicates that they are registered and also I can't send pms in some sites. I don't know what other damage is done.

  It seems that the bug in the picture picker is because the new FF updated (it works in it), it is the same with Facebook album downloader. There are numerous answers in their pages. MP is a temporary problem, and IMHO, all the things that I've met are because the update. I would ask some mod to close my question.

• Problem with VCenter server on VM - how to upgrade the host

  Hello.

  I have VM on VCenter.

  I can't update the host with patches critical host because he can not enter maintenance mode.

  Is it possible to do this?

  Thank you

  Best practices so that a VC Server VM on a host of multi with SAN storage environment must be available for the use of compatible hardware for VMotion or VCA VMotion.  If you do not have an environment that allow VCA to then I would say that the best practice is to have the VC server on a physical server - it can even be installed on XP.

• Problems with boxes and slide do not pause.

  Hello

  I continue to struggle with trying to keep the slides paused while the user interacts with buttons or areas to click on my pages. I tried to use the click box hidden out of the Tower, but it does not work for me.

  I would be eternally grateful if someone could take a look at this slide and let me know that I can get this to work. It's something I will do again and again (in different ways), so I really need to figure this out once and for all.

  Someone is willing to work with me on this? Even if it is offline, I am pleased to publish the results as soon as we have them working.

  Here's the problem:

  In the slide, the user has several options to choose from. They are to click on the options they think are correct. I placed boxes click on each option with attached actions. However, it seems that the March slide happily on his way with every click, so that finally the click boxes are no longer available to click. What can I do to stop this?

  Captivate 4 file attached.

  Hello

  I downloaded the file and it looks into Captivate.

  What seems to be the case, it's that when you click, the break is released. Therefore, a way to "reset" from the reading head.

  Why not try to create a tip Action that performs projection, hiding and resetting the read head?

  It is relatively simple. You use a Standard of the Show Action. Standard action of hide and seek. Then follow in the end with a reset of the read head. Normally, I use a transfer action. I assignrdcmndGotoFrameAndResume the value of rdiinfoCurrentFrame - 5 (to save the 5 frames).

  

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Problems with wild tangent error "Could not connect to the server."

  Original title: wrong with wild tangent

  I recently downloaded ie 9 latest version. If this has something to do with him or not. but I can't play all the games that I download from wild tangent. What happens, it is 'impossible to connect to the server', please check you internet connection again. but I'm connected to the internet, otherwise he would not have uploaded the game

  Hello

  What operating system is installed on the computer?

  The error is that she's trying to connect to wild tangent, but unable to complete the connection.

   

  Method 1: You can disable the security software and see if that helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Reference:

  Disable the antivirus software:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Method 2: Optimize the Internet Explorer browser.

  Reference:

   

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

   

  Internet Explorer is slow? 5 things to try:

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

• Problem with moving and resizing effect without stopping on the keyframe

  I move and resize a superhero in the cloud (see video), but the superhero continues to go after the last keyframe.  I just don't understand.

  Video display: problem with automation pos-scale - YouTube

  (don't mean to double post but the last message I have on it seems to have disappeared)

  I'm not to my editor at the moment so I can't be too specific, but I don't know that this is because key frames without being linear, they may have a Bezier curve that will make them to overshoot. If you right-click a keyframe, giving you no option?

• "No cell coverage" not listed in the use of the battery

  During the audit of the use of the battery parameters, on an iPad 2 Air, WiFi and cellular, upgrade 10.0.2, 'No cell coverage' is listed and uses a lot of battery percentage. This never happened since the purchase of the iPad two years ago. I've recently updated to iOS 10.0.2 and T-Mobile as the cellular carrier. This occurs when the two Wi - Fi AND cellular data are turned off. I barely use the cell service as it is, first of all just use wifi, and I never leave the cellular data connection on when you do not. I noticed a few days ago a T-Mobile "Carrier Update" has been pushed to the iPad. Someone else with the same situation?

  Hi there, stumped127! Thank you for using communities of support from Apple!

  Use of your iPad 2 Air indicates that it is looking for service even if you have data Wi - Fi and cell phone turned off after update to iOS 10.0.2. Given that mobile data is off, it shouldn't have an impact on the battery and I will be happy to help you with this. Be sure to test after each numbered step.

  How to back up your iPhone, iPad and iPod touch --before troubleshooting a device, I always recommend a fresh backup. It is preferable "to have" one to the 'need' to a backup.

  1. forcing a nearby app on your iPhone, iPad or iPod touch - first, quit all running applications, and then restart your iPhone, iPad or iPod touch - never underestimate the power of a good restart.

  2. reset the iPad settings - do not forget to write your networks, Wi-Fi/passwords before you start. On your iPad, go to settings > general > reset > reset all settings. This step returns your iPad to factory default settings. Test and if that solves the problem, use your backup to restore your settings.

  Take care!

• When I go on some websites (such as cricinfo), I am redirected to a page of 123 find. I don't have this problem with IE, and when I re - install firefox, the problem reappears

  If I quit firefox and then restart your computer and access the page, I can go to the web site. Then very quickly, the 123 find program takes over.
  This happens at home, I have all the info here.

  Finally, the problem is solved by running malwarebytes. I've deleted and reinstalled firfox and the problem reappears. This occurred because the Trojan horse was in the plugins folder that was not deleted when firefox has been removed.
  After that the Trojan horse has been deleted by malwarebytes, the problem is not happening yet.

• Problem with gel and hour glass lights as if the update every 10 minutes or so and lasts 52 seconds or more.

  When I'm on a site, any site or writing an email every 10 minutes or so, the hourglass comes on and I can't do anything other than wait. I think it's something to update. How can I stop this?

  Upgrade to Firefox 8.0 can do, unless there is damage to the indices places.sqlite, anyway, that's the cue and I actually (identical to the options) option.

  gel at regular intervals: http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals

  https://addons.Mozilla.org/firefox/addon/places-maintenance/

  
  Install the module, run at least the option mentioned in the article, I ran all. When finished, you can uninstall the extension, without having taken Firefox down, the extension is one of the new JetPack extensions.

  Thought I had this problem right now, but it's my anti-virus, usually binds things pretty well.

• problem with resizing and remove

  I have a problem with resizing images after loading, not all of the images has the scale ratio 0.75... so for the most part, I just stretch the images having the ratio...

  is there a good method of resizing/scalling? for example enjoyed.

  and once I've loaded images, I add in the imageContainer.

  I couldn't find a way, if I click on the next thumbnail, she remove the last child (image) of the imageContainer...

  I'm confuse ATM please point me in the right direction...

  Thank you

  Load the image clicked

  function mouseClickThumb (e: Event): void {}

  var thumb: thumbnail2 = e.target as thumbnail2;

  var linkName:String = e.currentTarget.name.toString (); get the name of the link

  var imageLoader:Loader = new Loader();

  var urlRequest:URLRequest = new URLRequest (linkName);

  imageLoader.load (urlRequest);

  imageLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, imageLoaded);

  function imageLoaded(e:Event):void {}

  var image: Bitmap = (e.target.content) Bitmap image;

  image.x = 0;

  image.y = 0;

  somehow if I resized the images here, it didn't turn right for all...

       }

  imageContainer.addChild (imageLoader);  / / How can I delete the last image? if click on the following icon?

  }

  If you want to remove the last (highest in the display list) child of a container, you can do this way:

  var numChild = imageContainer.numChildren ();

  imageContainer.removeChildAt (numChild - 1);

  don't forget display lists starts with 0, not 1, so you must always subtract 1 to get the level number of the child in the foreground

• I have a problem with activating photoshop elements 14 upon activation of the server responses me that I am not bound. I start again and I still got the same message! I use a pc with windows 10 pro

  No response to my problem

  Amy_Wong

  I have a problem with activating photoshop elements 14 upon activation of the server responses me that I am not bound. I start again and I still got the same message!

  !

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite.

• I have a problem with creative cloud applications is not to be downloaded or updated date on my i mac, current applications, I still have work. I uninstalled the cc application and re-installed but without success, in the apps tab there is no error code o

  I have a problem with creative cloud applications is not to be downloaded or updated date on my i mac, current applications, I still have work. I uninstalled the cc application and re-installed but without success, on the applications tab there is no code error only saying download error out area allowing you to charge applications call does not work... any suggestions?

  Hi James,

  Please follow the article: CC help | Download error in the applications tab of Creative Cloud Desktop Application to get this fixed number.

  Please let us know any questions.

  Thank you

  Yann Arora

• I installed Adobe CS6 Design & Web Premium on my Mac Book Pro a few years ago, but repeatedly encountered problems with programs freezing or do not open correctly. It is a students and teachers version so a University identity is required, but I'm

  I installed Adobe CS6 Design & Web Premium on my Mac Book Pro a few years ago, but repeatedly encountered problems with programs freezing or do not open correctly. It is a student and teacher license version so a University identity is required, but I'm no more a student - can I always reinstall it from my academic ID may no longer be valid?

  Erin Elzo as long as serial number has been registered under your account at http://www.adobe.com/ , then you should be able to continue using the software.  You can find details on how to locate your serial number registered to find your serial number fast - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC