Problems with casting light 3D tutorial VCP
Working in CS5 on this point, but I'm not able to whisk the position of the energy of Orange to light layer 1 layer. I tried several times now. I get this message:
After effects WARNING: object of type found light that requires a number, array, or property
Expression disabled.
Error occurred at line 0.
COMP 'street Footage '.
Layer: 1 (Orange Energy.mov
Good: 'Position '.
Anyone know what they mean by '' number, table or property ''? There was an earlier instance of pick - whip position layer in this tut and I had no problem. But this time I'm stuck. I checked the reviews on the site and noticed others had similar problems, but no one seems to have ventured to a solution.
Any ideas out there?
Looks like you might be pick - whip to light itself and not the Position property of the light.
Dan
Tags: After Effects
Similar Questions
-
Problems with the lighting effects filter
I have problems with the lighting effects filter, I can use it on photographs, but the filter option is inactive on others, advice?
This filter only works on images of 8 bits, not on 16 bit. Could it be the problem?
-
Problem with a light Table in Bridge CS6
Hello! After a re - install (which does not solve the problem with PS), now, I find that, when you use the light table in Bridge CS6, and after hitting the SPACEBAR, if I then click on the image, it goes to the size of 800%! Before the uninstall and reinstall, it has perfectly worked by taking images at 100% size.
I hope someone can help...
Thanks, farming
Why you reinstall photoshop cs6?
What operating system do you use?
You reinstall all updates Photoshop cs6 by going to help > updates within photoshop cs6?
After you enter the light table, use your mouse wheel to zoom to 100% and leave the light table.
The next time you go to the lightbox and click on the photo, it should only go to 100%.
-
Pavilion dv4-2170-us has problem with connection light display
The cover on my laptop seems to have a bad connection, because I have to play with the angle to get the screen to
show anything. Sound very, very delicate.
Is this something that can be fixed by a tech or should I get a new laptop? I'm asking because there is another nother
problem with function of my computer.
HI @compugirl ,
I understand this thing you display may have a bad connection that you have to play with, then fish on the screen to show the line.
Want to know if this could be fixed by a tech. The short answer is Yes. Here is a link to 2009decembre 17 December 17, 2009 HP Pavilion dv4 Entertainment PC Maintenance and Service of Guide. Please note Chapter 3 page 3 for a list of the replacement screens supported by number of the part.
It may just be a connections loose as you said, either a bad connection cable... The cable may have become defective through the opening and closing of notebook, during normal use. Please note Chapter 4 page 27 for the removal of the screen procedure. Before considering the replacement of the screen, I would try a new cable first to exclude it. You should be able to buy the cable to any computer supply store.
I hope this has helped.
-
Problems with low light action on 70 d calls
I have just spent a T3i to a 70 d. I seem to have trouble with the plans of action in low light situations, suggestions on implementing...
Nelly wrote:
cicopo wrote:
You might find some ideas here.
A better idea would be for the OP to give us an idea of what is meant by 'disorder '. Without knowing what the real problem, make suggestions are going to be a waste of time.
More information would be useful. But I bet confidently on the sentence "my photos are blurry" my silver or black.
-
Problem with cast/color tone of images in LR catalogs
About 4 days ago I came across the following problem. Unfortunately, I don't know of a good way to describe this, so my research in the forum and knowledge base are coming short. Ideas (or better yet, solutions) would be greatly welcomed.
The isssue is that any image that I discovered, in any of my LR catalogs, is displayed correctly as all images are only to show the cyan values or orange. (I don't know the right term for this, but it seems that Miami Vice took my camera. Dark tones appear as orange, while lighter ones appear as cyan.) This occurs regardless of the type of file (jpg, cr2, crw, dng), folder and catalog. Reset import everything or parameters of development has no impact. The histogram displays what I see in the previews. The jpg exported from any image of the catalogue is displayed correctly - no cast.
Here's what I have:
LR 3.2 (improved to 3 04/09/10)
VIsta SP2
I hope that it is a matter of simple adjustment, something that I have inadvertently changed...
When I view the DNG existing on my hard drive in another program (Fast Stone Image Viewer), they will be displayed correctly. I tried a variety of other stuff (uninstall 3.2, returning to 2.7, compensation of previews in memory cache, creating of new catalogues, opening the backup catalogs, etc.) without success. So I think that something is wrong in Lightroom only.
In the screenshot below, you can see the alteration of the color in the flag and pine needles. Others capture screen shows how images are affected in the same way.
Thank you kindly, Alyssa
Looks like your display profile is watered... re-profile of your screen.
-
I have a problem with the light becomes dim.
Original title: gradation of light will brighter
Hello
A few months ago I brought this new touchscreen Sony Vaio. Series E P. 14 when I got it, the brightness was full brightness with no gradation or change without doing me it. Now a few weeks ago, it was about 20% to 100% before. I tried it on Control Panel to make it brighter and change the time to graduation and tried to reset advanced setting and plans of the brightness but nothing seems to keep the brightness enough for me to see without squinting my eyes.I'll change the brightness full brightness, and then click "Save Setting" and so he'll be bright but then a few seconds later it shuts down to 20%.Any ideas?AlyxlmHello
A few months ago I brought this new touchscreen Sony Vaio. Series E P. 14 when I got it, the brightness was full brightness with no gradation or change without doing me it. Now a few weeks ago, it was about 20% to 100% before. I tried it on Control Panel to make it brighter and change the time to graduation and tried to reset advanced setting and plans of the brightness but nothing seems to keep the brightness enough for me to see without squinting my eyes.I'll change the brightness full brightness, and then click "Save Setting" and so he'll be bright but then a few seconds later it shuts down to 20%.Any ideas?AlyxlmFrankly - contact Sony. It's only a few months and if software for the hardware controls (which are both - material and software for it - Sony orders and/or the supplier they bought the real components of support) do not work as expected - they need to make it just right for you.
Check the BIOS as opposed within Windows controls (assuming that controls exist)? -
My Satellite A300 - I have a problem with the lighting system
Hello
I bought new laptop satelliite Toshiba's 300 and the lighting system does not work
When I click on the tab illumination he cut the sound only and do not switch off the light...
Best wishes
Have you tried to reinstall the package of added value?
-
Hello problem with rendering lighting which is gray
The tool rendered lighting is dimmed
Check Edit > Preferences > Performance If "Use graphics processor" is selected.
If this does not help, try to change the 'advanced settings '.
Some graphics processors are not compatible. For more information look here:
https://helpx.Adobe.com/FR/Photoshop/KB/Photoshop-CC-GPU-card-FAQ.html
Fenja
-
problem with the lights in the background
This looks like the snow along the lower part of the questionnaires in the left quadant.
Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > looking for the latest graphics drivers for Vista > download/install them.
See you soon.
Mick Murphy - Microsoft partner
-
L20-182: problem with battery LED
Hello
I have a problem with a light that indicates the battery charge rate. After having disconnected the outlet, the battery light to the front of the computer lights but not the light battery. Someone had such a problem? Thanks in advance for the helpHello
Sorry, but your ad make me a bit confused.
After that disconnect the power adapter, the battery lights up but it s not really a battery LED. Is this good?
It would be very interesting to know what laptop you have.
But nevertheless, in my view must confuse the portable LED.
Please see the user manual. There you should find information on LEDs. -
I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you
Have you tried:
Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support
This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.
-
charge light flashing problem with hp probook 4530 s [redacted]
I have a problem with my hp probook 4530 s serial number: [edited by Moderator]. A few times while I use the continuous orange light flashing load on the battery and if I stop the laptop and try turning on the laptop, the orange charge light blinks 8 times and it is not running until I remove and insert using battery me back.kindly I'm so nervous.
more information:
Windows 7 ultimate 64-bit
BIOS version: F.25
[number removed for privacy]
Finally, I think it worked.
bios for update
Version: F.40 (March 12, 2013)
its almost 10 hours and I load/unloaded my laptop 2 times and his works fine. mashAllah.
No problem flashing light up now.
hope I never face again the blinking light problem. God willing.
Here is the download link for the latest version of the bios:
Note: the BIOS update is sometimes risky, so be careful and follow each instruction.
-
I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer. I use V10.11.3. An idea about what is happening
Hello mpm068,
Thank you for using communities of Apple Support.
Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:
Choose the Apple menu > shut down.
After your Mac stops, wait 10 seconds, then press the power button.
As soon as you hear the startup tone, hold down the SHIFT key.
You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.
Release the SHIFT key when you see the gray Apple logo and progress indicator.
To exit safe mode, restart your Mac, but no press during the startup.
OS X El Capitan: start in safe mode
Take care.
-
I have problems with setting up my Gmail in my room light 6 mL, where do you think I could get help for this?
Hi kikikilala,
Please explain the problem you are oriented connect Gmail with Lightroom
Try reauthorizing your Gmail account once in Lightroom and see if that helps.
Refer to Validation of Gmail failure
Kind regards
Assani
Maybe you are looking for
-
Different always come up. It seems that these codes want but are stopped by my program of Winpatrol. These codes are frequent while online. They appear only in Firefox? So what are these code?. Can they be deleted from the folder? Firefox has them. T
-
How to upgrade output during input/output synchronized?
Hello We use an input/output series card m PCI-6289 to provide participants sound while recording the EEG. Our inputs and outputs are synchronized using the diagram that is attached. To date our output audio segments have been relatively short. Howev
-
'Read only' files impossible to remove. Compensation in 'Read only' window made no difference
Was a reference to the file manager but file manager does not come with XP 2. Any suggestions
-
Text in blue the occultation in officejet 6310
I was pulling my hair out trying to fix a problem printing with text fonts. My Officejet 6310 wants to print a pale blue shadow under the text in bold . Doesn't seem to matter where I... internet print or word document. I checked all the font sett
-
How update the "ListItemComponent" view in ListView?
Hi all I do samples of listview. Is it possible to refresh the view a list (ListItemComponent). If so, please provide guidance or a link. Thanks in advance.