Problem with cast/color tone of images in LR catalogs

Similar Questions

• Problem with printer color ink large format 7500 has

  Having a problem with the color cartage 920XL

  I tried to print several photos of 4 x 6, where the first is fine and 1/2 way through the other, it starts to print only red

  installed 3 new cartridges, printer head cleaning color, alignment and began to print 4 x 6 photos and the same thing happened.

  Help, please

  I just bought 3 920 new (no large capacity) and was going to try a 3rd time but whated to here from you

  Thanks Mike

  Hi SchneiMB,

  Try the following solutions in the order presented to resolve the issue. When one of the solutions solves the problem, there is no need to continue troubleshooting.

  Troubleshooting print quality problems

• problem with the color picker tool

  Hi there we use Fireworks CS3 and seem to have problems with the color picker tool.
  
  When we hover over a color and select it, we do not get the same color. Sometimes, we choose a blue color and it translates into a green.
  
  Also when we have a color for example chabouni and reduce the color so something lighter, he returned to the Carter.
  
  Can anyone suggest what might be the problem.
  
  This has only started happening recently and nothing major has been installed or removed from Fireworks.
  
  See you soon
  LTA

  Hi Alex,

  Im not sure if you said today or not.

  "Your a chamption!

  Thanks for your help, it works perfectly now.

  I must have accidentally clicked on the nod to the colors for the Web.

  Cheeers
  Malcolm

• Color laserjet 4600 - problem with one color (yellow) for the most part does not print

  Colors look purpleish when printing photos.  It turns out that this is a problem with yellow print.

  We tried to replace the yellow toner cartridge, and it was not fixed.

  PQ troubleshooting, the yellow page is empty except for a thin (16th of an inch) to 99% a horizontal line at the top of the page.

  In the configuration page, all the different areas that should have the yellow are mostly empty, with the exception of the same sort of thin horizontal line at the top of each of these areas.  After updating the firmware from 03.001.0 to 03.016.0: in addition to what is described on the configuration page, some of the fields in the configuration page that should be yellow, have a pale magenta and more this yellow line.

  Our technician came several times and has so far tried to replace the hvps, scanner laser, toner alignment and trainer kit Board.  Nothing has improved the question.  Then for the replacement is the regulator dc ($1000).

  Anyone here have an opinion on what could cause this problem?  It seems they are just throwing parts at home and we're about to tell them to give up.

  It wasn't the dc controller.  I figured out well out - somehow, there was a spring missing behind one of the speeds in the train of drum roll.

• Problems with the colors and the other in CS6

  Hello world

  I ask your help today for the first time, because I'll have some pretty big problems with colors in Adobe Photoshop CS6

  I'll let you watch this video I recorded for you show what kind of problems I have. As you can see, a very specific color black...
  In addition, you can observe the framework arround the image flashes sometimes...
  

  and two screenshots, the firt we're here to show you the problem, the second to show you my configuration:
  On the one below, you can see the tray black is supposed to be the same blue as selected...
  

  
  
  I also sometimes flashes of the space work and other things like that... But I'm sure that all the problems are related: if I can solve the problem I have with the colors, everything should get back in order.

  Thanks for your help!

  Edward - France

  Update your graphics driver.

  Mylenium

• Problem with clip color when you export a sequence

  Work on an iMac i7, CS 5.5

  I created a composed sequence 3 staples. I color corrected the first two (using the RGB curves Corrector) but not the last one. The clips are transcoded DNxHD original AVCHD (which I can't treat gently on my iMac). When I saw and/or make my sequence, the colors are great for all the clips.

  When I try to export it as a Quicktime H.264 movie, the first two clips are rendered as I want to, but the last of them (with no color correction) only has the plan of the blue color!

  I tried to export directly (without delay) or by using the queue of the SOUL, but the results were identical.

  One solution is to 'pretend' to correct the colors the last clip (barely, I adjusted the Red). Then export works very well.

  Sounds like a bug to me candidate!

  Known problem and workaround: movies have a blue cast when exporting through Adobe Media Encoder in Adobe Pro CS5 first or CS5.5

• Problems with Spot color gradients

  Hi all

  I have little experience in dealing with spot colors.  I'm trying to mix two colors of accompaniment for a print job.  Unfortunately the spot color gradient (left image) do not mix like the gradient color of the process (right image).  On the contrary, they will fade to a lighter color in the Center where they meet.  I'm sure that someone out there can help you because I think that is more of a technical problem that I'm just not familiar with.  Thanks in advance to all comments!

  Hugues

  

  Hi Hugh...

  The difference between two images, is the color range, mode CMYK is larger than the spot colors, this cause an incompatibility of mixture. If you want a better overview of your spot color on preview test print on the view menu, but don't forget that the reference of the right color is Pantone color card.

• OfficeJet 5470 e-all-in-one: Subscriber instant - problem with #62 color cartridge - Cyan Ink only

  I just installed a new color cartridge and our copies look right.
  
  I aligned the printer and then cleaned them (the two cleanings) and Print quality Diagnostic report shows nothing in the column "Cyan".
  
  Is it possible that the cartridge is defective?
  
  Thank you very much for your help!

  Hi @fiveinthetree,

  I understand that you are having some print quality problems with your HP Officejet 5740. I'll be happy to help you.

  It is possible that the cartridge you received is defective, however, there are some troubleshooting, you need to try before you can replace as defective cartridge.

  I recommend contacting instant ink 1-855-785-2777 for support in real time with an agent. If they determine that the cartridge is defective, they can help you with the replacement.

  If this help will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• Print black color with a color of the image page

  If I set up my printer to print in color, it prints black parts with cartridege or black color combination?

  Hi reneincer,

  I understand that you would like to know if the printer uses black ink if you set up to print with the color cartridges.

  There are different to choose print settings.

  High quality grayscale will use less cyan, megenta and yellow (CMY) that say normal printing mode, but will not be a drastic reduction. However, the only feature of black ink slightly reduced the use of the CMJ. This setting produces a composite black.

  The feature of black ink only will limit the use of color for the amount that passes under the black ink to ensure an impression for a long time and the true-black tone that should.

  More economical printing would quickly the project and black ink only.  Grayscale setting uses the color cartridge to print in grayscale, because it offers better quality.  The quality is better with shades of gray, but it uses more ink.

  You will find information in the following article. Use of inkjet printers ink.

  Here is a document on the color management settings.

  I hope it's useful.

• Problem with my payment on Stock Images

  Hello. I was wondering if this has resolved. I just signed and updated my payment.

  Error

  There is a problem with your payment. Please try again later or contact Adobe technical support.

  Is there a solution? I need to buy 2 videos to finish a project...

  Hi K.Winger,

  The trolley came several times. I'll be sure to pass on to product management.

  I think I know what is happening. Instead click on the cart icon in the thumbnail of the image, you can click on the center of the thumbnail to open the details for the video. There will be a licence and the registration option and you will be able to buy the video for details. We are aware of the problem with the purchase of the tile and hope to have a fix for this soon.

  Please let me know if this work around does not work for you.

  EBQ

• Problem with stamp - color

  Hi, I have a problem when I want to clone and use stamp have problem with color like this:

  How to solve this problem?

  Check your buffer tool Mode in the Options bar and see if it is set to something else than 'Normal '.

• Problem with the color when exporting to other Adobe programs

  Hello

  When I uses 32 bits per layer in my After Effects to get the really nice glow effect and make everything look OK, but when I use the Dynamic Link for Premiere Pro and then try to make my sequence with Media Encoder deferential eye colors inside After Effects.

  Is there a problem with 32-bpc and dynamic link, or I do something wrong?

  Editing programs do not operate in 32bpc, even if PR calculates the effects in 32 bits. This has to do with the range and models of different colors. Usually 32bpc also requires correct color calibration and conversion via LUTs or profiles from your computer screen is not initially 32bpc. This being the case and to avoid the problems of conflicting settings and hardware acceleration (which is also used for color management), in such situations, it is better to make the file and import it in first. Otherwise, you have work major reading and configuration to do.

  Mylenium

• Problem with the rendering of the image in Photoshop CC2015

  Hi, I just bought PC especially for the Photoshop works (usually use Mac) and I have a serious problem with image rendering powered by the device driver (nvidia GTX980). Lines and other parts of my design are strongly serrated (it looks like the poor antialiasing) - even in an excerpt from 1:1 (100%), so it's really invisible before. Could you look at my screenshot and try to understand what is happening? In this State, it is totally useless to my job (I am perfect pixel). Help, please.

  On the screen:

  1 - view 300% of the severely affected hardware rendering (screenshot of view 100%) - on the left you see the battery icon?

  2. right - 300% view showing how it should look like in real life.

  

  OK, I just found the solution. It's pretty simple and obvious in some respects if PS is using OpenGL as a main renderer, setting 3D graphics card will have a significant impact. Sailing... I just need to disable antialiasting FXAA in NVidia Control Panel. Now everything looks good as is.

  Problem solved.

• Problems with export low res/compressed images Lightroom

  Hi, I recently noticed problems with the export of images. Even if I did change the pixel dimensions that I used to use (640 x 600 for a blog), the exported image is significantly more low resolution than usual. The only things that have changed is that I upgraded from LIghtroom stand-alone 5-6 Lightroom on creative cloud - and also I got a new Macbook Pro.

  You seem to be using a mac book pro with a retina display. This is that websites must be programmed to feed your browser an image of higher resolution that they would feed to people using a lower resolution screen. Not all Web sites do it properly (not more). I don't know if your site is done automatically. An image of 640 x 600 or 900 x 800 won't cut in general, certainly not to the size you are displayed on this Web page. These sites are usually not this worked well. I've written about how to do it on my blog here: Jao photo blog: a much simpler way to serve the retina displays the correct image but you need a way to use both versions of the image somewhere.

  On your retina display when opening an image of 640 x 600 pixels in preview will also look bad as it will show too default double pixel. A good thing to do is to go to preferences in preview.app, click on the images and select "1-pixel image is equal to 1 pixel of screen. Then when you open small images, it should show the actual resolution of the screen. If your image is larger than the screen, you can press command-0 and it will display the image in the native screen resolution. Assume that you are using "best for display" in the context menu of the resolution in the display of system preferences section. You should have probably defined it this way in any case because otherwise the 1:1 in Lightroom do not display correctly. Your screenshot is displayed to indicate that you have defined properly.

  In addition, there is absolutely no reason to use quality 100. Most of the 75-85 images will be indistinguishable from 100, but will be much smaller in size. Second, ignore the DPI setting. It is not relevant to the images online. The only thing that matters is the size in pixels.

• Problem with editing colors in Illustrator CC2015

  Hello

  I'm having a problem when I try to use the function "change colors" in Adobe Illustrator CC2015.  I selects a section/items to be recolored, select "Edit colors > Recolor art" in the "Edit" menu

  When the 'Redefine' window, Illustrator automatically recolors the selected items without my choose what colors I want to change, or what color I would what they changed. It seems that illustrator applies the swatch/colors of something I last selected.

  This makes it impossible to change the colors. I have never had this problem with Illustrator before, looks like when everything started when I upgraded to CC2015.

  I hope that the screenshots below will help you to show my problem.

  This is the work I'm going to select to recolor:

  

  Then, this is done AUTOMATICALLY as soon as I select edit colors - illustrator applies colors in my work without my said to do:

  

  Or, if I had just done a red rectangle, Illustrator automatically apply red in the pane to change colors:

  

  If anyone has AN idea of what's going on, please help - I tried to understand what is wrong for weeks.

  This is a bug and it is being investigated. As for now, you can click the eyedropper icon in the Recolorier Art dialog box to reset the graph.