Problems with custom HTML form entry

Similar Questions

• My customer is having a serious problem with the Contact form Widget

  My Client is to have a serious problem with the Contact form Widget that I can't seem to figure out how to fix.

  I created a website for a client and inserted a widget of Contact form on the "Contact us" page Whenever someone uses the form, e-mail receive my client shows my e-mail address as the sender. So when they "meet" the email, the response is sent to me and not the person who sent the original message. This creates a major problem in that I get flooded with answers e-mail while my client's potential customers go without a response.

  When I look at ' Site Manager > email system > Workflow information > e-mail address on the site administration Console, it displays my e-mail information. This is what needs to be changed?  If this is the case, what needs to be placed in this field for the email address of my client receives presents information email senders in the field "from".  My client wants to be able to click on reply and the message sent to the right side. They would be very angry if should be cut and past shippers Correo electronico of the body text on all the contacts they receive.

  Their feeling is that if I can't find a way to make the contact form works as it should, then there is no need for them.

  Can someone help me understand this? I really don't want to disappoint my first client.

  Congratulations for your first customer! =>

  Looks like you can have your email in places where your customers email should be.

  Here are the places you need to change your e-mail address.

  First adjust the answering of your web form is your customer email. Screenshot: http://screencast.com/t/YWiZZ30E0jE and http://screencast.com/t/u4t69anTLR

  Second set Emails to come your clients e-mail system. Site management > system email > set default "from" e-mail. Screenshot: http://screencast.com/t/EAr2sfXk

  I always go through each email system and check the e-mail address after you set the default value. I found that it doesn't always change them for some reason any. Note: If you are on a lower to webCommerce plan your list can be shorter than what is shown.

  Make sure that the email you the list of customers is also an email they want in public.

  Also provide information on the TSA that thetrickster888 is good information.

  I hope this helps.

  Lynda

• Problems with a contact form of Muse in a plesk (windows) Godaddy hosting account

  Hello

  I have problems with a contact form of Muse in a plesk (windows) Godaddy hosting account. It is not send. It is as if the input image verification is not valid.

  I tried BusinessCatalyst and it works fine. I also tried a similar form on another site hosted on c-Panel (linux) to Godaddy and it works as well.

  Help!

  Thank you.

  Hi Marianne,.

  Please check with your host for assistance with the same provider.

  Kind regards

  Akshay

• Problems with the contact form

  Good day to you all,.

  im a total newbie-muse.

  That said: I have some problems with a contact form I've tried to insert into my homepage.

  When I try to download it via ftp to our server muse tells me that there are some problems with the configuration of PHP.

  In addition to the contact form, the site works very well.

  I tried to change the version of php on our server at 5.6, but it still doesn't work.

  
  Any ideas?

  Thanks in advance and greetings from the Germany.

  You can consult this document: Troubleshooting Muse form Widgets used on the third... | Adobe Community

• Problem with autoplay HTML animation

  Hi guys, I have some problems with the HTML animation where to get an overview of my content on the adobe Viewer. Maybe you know how to solve this problem...

  My Folio contains 1 atricle with 5 pages. The first page is static, the other - page with an animation that should be presented when this page (autoplay). the third and fourth - game animation as automatic, the last - static page.

  Seems that next page is cached when preview us the page in the adobe Viewer, so when we sail directly to the second page, which contains animation - animation on the page is partially played, so we see only the rest of the animation or just the final animation point. Go to the next page - the same question. But when we sail from first page to the third-, we see animation from the start.

  How can this problem be solved?

  PS: Sorry for my English :")

  You must insert a little late in the web content window... delay = 0.125 second

• Problem with LOV in form

  Hi friends,
  I have a particular problem with the LOVs in forms.
  
  I have two blocks A and B. Block A, I have a couple of items I1 and I2 who LOVS and the two elements are required. When we choose I1 I2 is met as well. The value in the I2 is perfectly valid. Both have the property of "Validate elements in the list" No..
  
  However when I go to the next block B after selecting the value of I2 I1 is removed (I1 is not deleted) and the cursor returns to I2 since it is mandatory. I select the value of I2 again, and then when I get back to block B it works. There are only two values that get populated I1 and I2.
  
  I'm working on Oracle Forms 10g. Version of the suite ebiz is 12.1.3
  
  Can someone help how to solve this problem.
  
  Thank you

  Hello

  First thing, you have two block A and B and four other field.

  In the affirmative.

  Second thing, if it is a parameter dependent for example if you select provider of L1 and L2 Supplier site name is filled...

  Third thing, you need to check how much LOV you created for this four Fields.If, you two created his evil. Create four different LOV and attach to the fields and check if it works now.

  Thank you & best regards
  Srikkanth.M

• Problem with Simple Contact form fields do not come into the home.

  Hello

  The form of a Simple Contact on our site is not letting users enter their names and e-mail addresses.  The other fields for cell phone and Message are working well.

  I though this might be a problem with the hosting, but the site is hosted on Business Catalyst (badfishy.businesscatalyst.com).

  I created other test sites and insert the Simple Contact form which worked perfectly, so I'm not sure what I did to the main site to cause this problem.

  Any help would be appreciated muchly.

  See you soon

  Ben

  Hi Ben

  I checked the site and it seems that the frame of the accordion is extended to the covering page so 2 fields in form because of which fields are not active because they are behind the plot of the accordion.

  Please reduce the accordion framework such as the fields of the form are not behind the frame and then it should work.

  Thank you

  Sanjit

• Problem with custom "CTRL + <" shortcut in Photoshop CS6 or CC (Windows 7).

  Hello

  I have a problem with a shortcut customized in Photoshop CS6 and CC. It works fine in Photoshop CS5.

  I put the "CTRL + <" shortcut to the command "flatten image." I use it for years, so it's difficult to change my habits of . I saved the shortcuts and everything works fine until I have restart Photoshop.

  After restarting Photoshop, the shortcut is automatically set on "CTRL + &"! I edited the file ".kys" where my custom shortcut is saved, and the file is good:

  	< control type = "static" id = "1141" name = "Flatten image" >
  		< shortcut > Ctrl + & lt; < / shortcut >

  I maybe it might be a problem with the custom workspace that also store shortcuts but this file is fine too.

  I don't really know how this is possible because the files are correct... Photoshop saves this values elsewhere?

  I would really appreciate help with this.

  Thank you

  G.

  Hi people,

  Or is that what I should say hi?

  Looks like you found a big bug.  The thing is, this bug is also bit strange...

  First of all, CNTRL +.< does="" indeed="" change="" to="" cntrl+&="" on="" both="" win="" and="" mac. ="" that="" said,="" this="" is="" only="" an="" issue="" for="" french,="" german,="" italian,="" spanish,="" and="" danish,="" not="" english,="" czech,="" or="" romanian,="" as="" this="" key="" is="" \="" and="" cntrl+\="" is="" assigned="" to="" select="" layer="" mask="" in="" channel="" panel="" in="" the="" later="" languages. ="" i've="" tried="" in="" for="" a="" number="" of="" different="" commands="" and="" the="" results="" are="" the="">

  In addition, however, once I met the problem ONCE on Mac, the app correctly prevents its use again.  Odd.  Windows has no these "belts" for this problem.

  I went ahead and logged a bug.  To be honest, I don't expect that the key (to the left of the W on the French keyboard, to the left of the Z for English) to work as a hotkey in general as it is very dependent on language, but its transformation of< to="" &="" is="" pretty="">

  Thank you

  David

• Problems with the HTML in the box of

  Hello! I have a problem with html content. For example, FWD. If I import the folder with the file index.html of FWD as an article everything works fine. If I connect it trough the overlay creator/webcontent folio) in a box in indesign dps, it remains empty. Looks like it does not find the images/paths?

  Klaus

  This sounds familiar. FWD is not like working in a superposition of web content, unless the JavaScript and other source files are uploaded in HTMLResources. This means change your local HTML file so that the paths to the JavaScript files, images, and CSS first to the virtual folder HTMLResources (.. /.. /.. /HTMLResources/) before their subfolder and file names. It's worth a try.

• Problems with custom events

  I'm trying to figure out this problem I'm having with custom events, I've read all the documents and tutorials that I can find, and this bit still makes no sense.
  
  I have the following configuration:
  
  LoginForm: custom component (which is created as a popup via the PopupManager)
  ApplicationHeader: custom component (which is added to the MXML application)
  application: creates the LoginForm as a popup via the PopupManager, has ApplicationHeader defined in the MXML.
  
  When a user logs in the LoginForm dispatches an event customized, there are two defined listeners:
  
  1. in the application:
  
  private void showLoginForm(): void {}
  var loginForm:LoginForm = LoginForm (PopUpManager.createPopUp (this, LoginForm, true));
  loginForm.addEventListener (UserLoggedInEvent.USERLOGGEDINEVENT, userLoggedInHandler);
  }
  
  2. in the component custom of ApplicationHeader :
  
  private function init (): void {}
  parent.addEventListener (UserLoggedInEvent.USERLOGGEDINEVENT, userLoggedInHandler);
  }
  
  When the event is dispatched the request listener picks it up as expected, however the listener inside the custom component sees ever-even if the event is set to bubble.
  
  The only way I managed to get this working is to do the following in the application:
  
  private void userLoggedInHandler (event:UserLoggedInEvent.USERLOGGEDINEVENT): void {}
  // .. the event handling logic
  the return of the event
  dispatchEvent (event);
  }
  
  This makes no sense at all, what happens if I didn't want the application to handle the event itself. There is a line in the documentation of the event
  who says "You can only save a listener of events with an object if that object dispatches the event." who could explain it, but it is still absurd.
  
  Any help/tips/examples would be most useful as I am pulling my hair out here.

  Never mind, I just read this post ( http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=60&catid=585&threadid = 1257178 & highlight_key = y & keyword1 = custom % 20components) and I was pointed in the right direction - I had to add the metadata for the event to the application.

• Problem with update of Forms 6i to Forms 10 g migration - Data

  Hello world.
  
  I have the following problem: I have a form that generates withdrawal slips. To do this, there is a button. When clicked, there is a slider with a query "SELECT" and "for update" that looks for the picking of sheets lines entered by the user. For each line, update the column "numberOfPickingSlip" with the appropriate number of picking slip (generated before the update loop).
  
  The strange thing is that the form works with Forms 6i, but it does not at all with 10g form, although I recompiled just the form (no need for Webutil run this form)... Only the last line of the form collection is updated. The code of the procedure is the same for BOTH versions... Nothing has changed. So, it isn't a problem of query. Even more interesting, if I run the form directly from Oracle Forms Builder and then clicking on the "Generate" button, it works but just once... And the worst case: after running the form directly from the Forms Builder, loading of another form (accessible from a menu above), of closing that form and then clicking on the "Generate" button, it doesn't work at all and only the last line is updated...
  
  I checked the contents of cursor and it contains all the lines that need to be updated, but for some reason, only the last is updated...
  
  How is that possible? Is there something special I need to do?
  
  Thanks for any help :)

  I had a similar problem with the help of update in a for loop. I know, it shouldn't be a problem, but you can try to use the rowid to update (at least to see if the problem goes away):

  procedure gen_pickingSlip is
  
    p_year VarChar2(4);
    p_numPickS number;
    p_line number := 0;
  
    cursor recup_maj is
      select ROWID,* from prepa
       where numPickingSlip is null
       for update of numPickingSlip nowait;
    recPickSlip prepa%rowtype;
  
  begin
  
    -- Retrieving the new picking slip number
    retrieve_num_pickingSlip(p_numPickS);
    -- Year of the picking slip
    p_year = to_char(sysdate,'YYYY')
  
    open recup_maj;
    loop
      fetch recup_maj into recPickSlip;
      exit when recup_maj%notfound;
  
      -- Position in the picking slip
      p_line := p_line + 1;
  
      --*This is the part where it seems only one update is done*
      update prepa
      set year=p_year, numPickingSlip=p_numPickS, line=p_line
      where ROWID=recPickSlip.ROWID;
    end loop;
  
    close recup_maj;
  
    if p_line > 0 then
      commit_form;
    end if;
  
    synchronize;
  
  end;
  

• Some problems with custom skin

  Hello
  
  I have created custom skin and I have some problems with it.
  
  (* 1) as you can see on [this image | http://www.zilp.pl/z/test01/Members/jakubp/Folder.2007-06-22.2113643678/File.2008-09-29.7372305410] item of Navigation within the Navigation pane command appears quite a color must be white, but gets by default the font for application (dark green) color. *
  My definition of the skin is the following:
  
  / * NAVIGATION PANE * /.
  AF | navigationPane - tabs:tab - start {(background-image: url('/skins/zilprcskin/img/tab-start.gif'); width: 4px ;}}
  AF | navigationPane - tabs:tab - end {(background-image: url('/skins/zilprcskin/img/tab-end.gif'); width: 4px ;}}
  AF | navigationPane content tabs::tab {(background-image: url('/skins/zilprcskin/img/tab-content.gif') ;}}
  AF | navigationPane - tabs:tab:hover af | navigationPane - tabs:tab - start {(background-image: url('/skins/zilprcskin/img/tab-start.gif'); width: 4px ;}}
  AF | navigationPane - tabs:tab:hover af | navigationPane - tabs:tab - end {(background-image: url('/skins/zilprcskin/img/tab-end.gif'); width: 4px ;}}
  AF | navigationPane - tabs:tab:hover af | navigationPane content tabs::tab {(background-image: url('/skins/zilprcskin/img/tab-content.gif') ;}}
  
  AF | navigationPane - tabs:tab: selected af | navigationPane - tabs:tab - start {(background-image: url('/skins/zilprcskin/img/tab-start-selected.gif'); width: 4px ;}}
  AF | navigationPane - tabs:tab: selected af | navigationPane - tabs:tab - end {(background-image: url('/skins/zilprcskin/img/tab-end-selected.gif'); width: 4px ;}}
  AF | navigationPane - tabs:tab: selected af | navigationPane content tabs::tab {(background-image: url('/skins/zilprcskin/img/tab-content-selected.gif') ;}}
  AF | navigationPane - tabs:tab: selected: hover af | navigationPane - tabs:tab - start {(background-image: url('/skins/zilprcskin/img/tab-start-selected.gif'); width: 4px ;}}
  AF | navigationPane - tabs:tab: selected: hover af | navigationPane - tabs:tab - end {(background-image: url('/skins/zilprcskin/img/tab-end-selected.gif'); width: 4px ;}}
  AF | navigationPane - tabs:tab: selected: hover af | navigationPane content tabs::tab {(background-image: url('/skins/zilprcskin/img/tab-content-selected.gif') ;}}
  AF | navigationPane - tabs:tab {margin right: 2px ;}}
  AF | navigationPane - tabs:tab - link {color: #ffffff; make-weight: bold ;}}
  AF | navigationPane - tabs:tab - link: hover {color: Red; make-weight: bold ;}}
  AF | navigationPane - tabs:tab: selected af | navigationPane - tabs:tab - link {color: #ffffff}
  
  (* 2) as you can see on [this image | http://www.zilp.pl/z/test01/Members/jakubp/Folder.2007-06-22.2113643678/File.2008-09-29.7372305410] menu scroll icons displayed twice: my and by default (rich). My definition of the skin is the following: *.
  
  / * MENU * /.
  AF | menu {- tr - visible elements: 2 ;}}
  AF | menu: depressed.
  AF | menu: stressed {(background-image:url('/skins/zilprcskin/img/menuHighlighted.gif') ;}}
  AF | : bar menu-point-text {color: White; make-weight: bold ;}}
  AF | menu: highlight: bar-point-text {color: #CEFFF1 ;}}
  AF | menu: bar-point-open-icon {(content:url('/skins/zilprcskin/img/small-arrow-down.gif'); margin-left: 2px ;}}
  AF | menu: go to the top icon {(content:url('/skins/zilprcskin/img/small-arrow-up.gif') ;}}
  AF | menu: go to the bottom-icon {(content:url('/skins/zilprcskin/img/small-arrow-down.gif') ;}}
  AF | : submenu of the menu-open-icon {(content:url('/skins/zilprcskin/img/small-arrow-right.gif') ;}}
  AF:menu:bar - point-text {make-weight: bold ;}}
  AF | commandMenuItem:menu - point-icon-style,
  AF | : submenu of the menu-icon-style {background-color: #a1caca; border: none ;}}
  AF | commandMenuItem: highlight: menu - item text.
  AF | commandMenuItem: highlight: menu-point-Accelerator,.
  AF | commandMenuItem: highlight: menu-point-open-indicator.
  AF | menu: highlight: submenu text,.
  AF | menu: highlight: submenu-Accelerator,.
  AF | menu: highlight: submenu Open indicator {background-color: #a1caca; border: none ;}}
  
  (* 3) as you can see on [this image | http://www.zilp.pl/z/test01/Members/jakubp/Folder.2007-06-22.2113643678/File.2008-10-01.6059969354] I also have a problem with default Panel box. Header font color should be white and ago strange empty space in header: *.
  
  / * DEFAULT CORE BOX PANEL * /.
  . AFPanelBoxHeaderCoreDefault:alias {color: #ffffff ;}}
  AF | panelBox::content:core:default {border-color: #149492 ;}}
  AF | panelBox:header - departure: kernel: default {(background-image: url('/skins/zilprcskin/img/tab-start.gif') ;}}
  AF | panelBox:header - Centre: kernel: default {(background-image: url('/skins/zilprcskin/img/tab-content.gif') ;}}
  AF | panelBox:header - end: core: default {(background-image: url('/skins/zilprcskin/img/tab-end.gif') ;}}
  
  Kuba

  Hello Kuba,

  I have a quick look in your message. For the moment I can solve one of your questions. The text of the panelBox header that you use skin:

   af|panelBox::header-element { color:White; } 
  

  Is on the white space, the 'skins/zilprcskin/img/tab-start.gif' image enough width? I use the same selectors (af | panelBox:header - departure: kernel: default af | panelBox:header - Centre: core: by default, af | panelBox:header - end: core: by default) and it works for me (but I'm not using an image, the only background color). Probably you need to change the width of header-early, restricting the scope and the lengthening of the Center header.

  As Simon said, Firebug is very useful to do this :)

  JVN

• Problem with the drive of entry

  Hello

  I have a problem with the connections of socket on blackberry.

  I send a command to my server and it will answer me with something like

  WORM R1; ACT: 0; CLV: 1.0.0; PRO: 1.0.1; UID: carlsum@ociss

  SC = (SocketConnection)
  Connector.Open ("socket://fes.ngv-group.com:5080; deviceside = true");
  sc.setSocketOption (SocketConnection.KEEPALIVE, 5);
  is = sc.openInputStream ();
  OS = sc.openOutputStream ();
  OS. Write (Protocol.doVersion (UID). GetBytes());
  OS. Write (Protocol.doLogin (UID). GetBytes());
  int bytesAvailable = is.available ();<----returns a="" value="" of="">
  Char input [] = new char [bytesAvailable];
  for (int i = 0; i)< bytesavailable;="" ++i="" )="">
  input [i] = (char) is.read ();
  };

  However my contribution [i] array only contains v.

  Why is - this is.available line () returns 0?

  How to read in the range full of WORM R1; ACT: 0; CLV: 1.0.0; PRO: 1.0.1; UID: carlsum@ociss in my input array

  I agree that treatment work should you find.  I suspect that you have a coding bug.  Take a look at the folloing code.  The result was what I expected:

  test
  t
  e
  s
  t

  Byte [] testBytes = new byte [] {(byte) 0 x 74, (byte) 0 x 65, (byte) 0 73, (byte) 0 x 74 x};
  String testString = new String (testBytes);
  System.out.println (testString);
  Char [] testChars = testString.toCharArray ();
  for (int i = 0; i)< testchars.length;="" i++="" )="">
  System.out.println (testChars [i]);
  }

• Problem with custom jobs 11.1.1.5

  Hello experts!
  
  I have a problem with the import of my tasks to the new env. I had previously worked with 11.1.1.3, and my fine imported tasks. But I have problems in 11.1.1.5.
  My steps:
  (1) modify the weblogic.properties and add dirs I need.
  (2) OIM_ORACLE_HOME game
  (3) place my jars in SheduleTask dir and dir location metadata xml files
  (4) run weblogicImportmetadata.sh
  
  What's wrong? Or should I change smth in xml?
  
  Thank you.
  
  Excuse me, import ofc.
  
  Published by: VarlamAnd on February 9, 2012 02:56
  
  Published by: VarlamAnd on February 9, 2012 02:59

  You must change the namespace here in 11.1.1.5

  
  **
  Published by: Zaba Nayan on February 9, 2012 03:30

  Published by: Zaba Nayan on February 9, 2012 03:31

• Problems with my actionscript form results

  It is a very simple form with an input field for e-mail and four boxes. When obtaining the results, I get the results of check boxes, but the e-mail indicates vacuum.

  I went on the code and the php of hundred times and don't see any errors. Here is the code for actionscript and php code:

  
  to import flash.net.URLVariables;
  import flash.net.URLRequest;

  / * Event mouseclick
  By clicking on the instance for the specified symbol performs a function in which you can add your own custom code.

  Directions for use:
  1. Add your custom code on a new line after the line that says "/ / Start your code custom" below.
  The code runs when the user clicks the symbol instance.
  */

  
  submit.addEventListener (MouseEvent.CLICK, fl_MouseClickHandler);

  function fl_MouseClickHandler(event:MouseEvent):void
  {
  
  If (eMail.text == "") {}
  eMail.text = "Please enter your email address ';
  
  }
  else {}
  Start your custom code
  create a container
  var allVars:URLVariables = new URLVariables();
  allVars.eMail = eMail.text;
  allVars.bead = bead.selected;
  allVars.jewelry = jewelry.selected;
  allVars.onlineNewsletter = onlineNewsletter.selected;
  allVars.sandiegoNewsletter = sandiegoNewsletter.selected;
  Send the info to the URL
  var mailAddress:URLRequest = new URLRequest ("http://www.southsunbeads.net/form.php");
  mailAddress.data = allVars;
  mailAddress.method = URLRequestMethod.POST;
  sendToURL (mailAddress);
  Thankyou. Text = "Thank you!"
  }
  }

  
  <? PHP

  Create local variables of the posted Flash ActionScript variable

  $senderEmail = $_POST ['eMail'];
  $senderNewsletter1 = $_POST ["Pearl"];
  $senderNewsletter2 = $_POST ['jewelry'];
  $senderNewsletter3 = $_POST ['onlineNewsletter'];
  $senderNewsletter4 = $_POST ['sandiegoNewsletter'];

  Strip slashes on local variables typed component software plug-in for security and run any control of error php based here

  $senderEmail = stripslashes ($eMail);
  $senderMessage = stripslashes ($senderMessage);

  
  IMPORTANT - change these lines to be appropriate to your needs - IMPORTANT!
  $to = " [email protected] ";            
  $from = " " [email protected] "; "
  $subject = "response of the game2."
  Modify the body of the message as you wish
  $message = "result is of the form:

  
  E-mail: $senderEmail
  Deal of the day of balls: $senderNewsletter1
  Deal of the day jewelry: $senderNewsletter2
  Newsletter online: $senderNewsletter3
  San Diego Newsletter: $senderNewsletter4

  
  $senderMessage ';
  Build $headers Variable
  $headers = "from: $from\r\n;
  $headers. = "content-type: text\r\n"
  $to = "$to";
  Send the email
  mail ($ $subject, $message, $headers);
  
  Assemble the message that goes back to the Flash
  The flash that actionscript is looking for a return of 'return_msg' variable it is no sendername in my form, can be simply change of generic message
  $my_msg = thank you '$senderName, all data has been sent.';
  Print the data back to flash that is patiently for her in the onCompleteHandler
  Print "return_msg = $my_msg";
  Script output
  Exit();
  ? >

  Thank you

  I salute you!

  In fact, the problem IS in your PHP script.

  $senderEmail = $_POST['eMail'];
  
  /* ... */
  
  $senderEmail = stripslashes($eMail);
  

  The last one should be:

  $senderEmail = stripslashes($senderEmail);
  

  PS:

  Next time, put your code inside tags ...

  It will be easy for people to read your question and will improve the chances that someone will respond.