Problems with HP Slate 7 voice tab

Similar Questions

• HP Slate 7 voice tab display Android icon after I tried the update of KitKat candy

  Hello

  I had an Android update information on my HP Slate 7 voice tab to update the version of KitKat candy. Once I followed the instructions on the tab got hangd and displays the icon of Android.

  I tried the instructions online to restart, but to no avail as by pressing the two buttons at the same time: volume upwards and downwards with the power off buttons and release them as soon as the hp icon rises.

  It did not work.

  Any help with this problem?

  Kind regards

  Ravishankar Rai

  As mentioned in my initial response,

  If this does not resolve the issue, please call our technical support: Hotlines all over the world. 

  Thank you.

• Cost of the repairs to the digitizer of HP Slate 7 voice tab

  Hi, I recently broke the digitizer on my Slate 7 voice tab and want to replace it. I just want to know how much would it cost to repair the screen/digitizer. I am from Kolkata 700094. So it would be even better, if you could suggest anything close to HP authorized service center. Thank you.

  -Josée

  Hi there @Deba_BNP90
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff. I understand that you're looking to get a quote, a repair and service authorized in your town center.  I'm happy to help you.

  I suggest you to consult the following Web site for addresses of service centers.

  Services for the home and special devices partners

  I would recommend contacting them and getting a quote, I can't predict what may be the cost of your region. It would be best to check locally.

  I hope this helps.

• Update of KitKat for Slate 7 voice tab

  He was the head of the company release update upgrade on HP Slate 7 voice tab Kitkat?

  Hello

  He will come to you the machine normally. You can also check yourself by using parameters on Tablet, update system

  Kind regards.

• Nokia Bluetooth headset works only with the HP Slate7 voice tab

  I have a pair it again with HP Slate7 voice tab / Nokia BH-112, who previously worked and now it does not work once I have disable pairing. Any solution?

  I solved it by myself.

  I disabled the bluetooth in my voice Slate7 tab.

  I put the bluetooth headset turned off.

  Yet once, I turned on the bluetooth headset and long pressed the power button on the bluetooth headset and at the same time I activated the bluetooth in my 7 Slate voice tab.

  She connected immediately and associated.

  Thank you all for your suggestions

• HP slate 6 voice tab: How can I update my software of voice 6 HP slate of Marshmallow tab?

  I use 6 HP slate voice tab and want to upgrade the current android software Marshmallow. Please advise how can I update?

  Hello and welcome to the HP support community!

  Unfortunately, HP does not provide a way to upgrade to Android version 6.x.

  If you want to take the risk of permanently damage the unit, try searching for 'slate voice tab upgrade Marshmallow' Google... This creates a lot of success.  (Make your own choices.  HP does not recommend this).

  WyreNut

• AF:panelTabbed - problem with displaying a popup on tab switching

  Hello

  I am facing a problem with disclosureEvent using clientListener of handling. I'm going to show a popup Ok/cancel whenever a user leaves a tab in panelTabbed.

  
  

  Here's the code: (this is the same code provided on the Oracle ADF code corner)

  < af:resource type = "javascript" >

  function alertTabSwitch (disclosureEvent) {}

  tab var = disclosureEvent.getSource ();

  {if (Tab.getDisclosed () == false)}

  popup var = tab.findComponent ('p1');

  Popup.Show ();

  popup.setProperty ("tabToOpen", tab.

  disclosureEvent.cancel ();

  }

  }

  function handlePopupOkCancel (actionEvent) {}

  popupButton var = actionEvent.getSource ();

  var butPressed = popupButton.getProperty ('popupAction');

  var = popupButton.getParent () dialog box;

  popup var = dialog.getParent ();

  If (butPressed == 'OK') {}

  var tabToFindAndFocusOnString = popup.getProperty ("tabToOpen");

  If (tabToFindAndFocusOnString.length > 0) {}

  var tab = AdfPage.PAGE.findComponentByAbsoluteId (tabToFindAndFocusOnString);

  tab.setDisclosed (true);

  actionEvent.cancel ();

  Popup.Hide ();

  }

  }

  else {}

  Close the pop-up window and stay on the page

  actionEvent.cancel ();

  Popup.Hide ();

  }

  }

  < / af:resource >

  < af:panelStretchLayout id = "PSL1" >

  < f: facet name = "center" >

  < af:panelTabbed id = "pt1" >

  < af:showDetailItem text = 'TAB 1' id = 'sdi1"disclosed ="true"stretchChildren ="first ".

  clientComponent = "false" >

  First tab

  < af:clientListener method = "alertTabSwitch" type = "Disclosure" / >

  < / af:showDetailItem >

  < af:showDetailItem text = 'TAB 2' id = 'sdi2' stretchChildren = 'first' clientComponent = "false" >

  Second tab

  < af:clientListener method = "alertTabSwitch" type = "Disclosure" / >

  < / af:showDetailItem >

  < / af:panelTabbed >

  <!-id = "af_one_column_stretched"->

  < / f: facet >

  < f: facet = 'Start' name >

  < af:popup = "deferred" autoCancel childCreation = "disabled" id = 'p1' clientComponent = 'true '.

  contentDelivery = "immediate" >

  < af:dialog id = "d1" title = "Tab switch Alert" type 'none' = >

  < f: facet name = "buttonBar" >

  < af:panelGroupLayout id = "g1" >

  < af:commandButton text = "OK" id = "cb1" partialSubmit = "true" >

  < name af:clientAttribute = "popupAction" value = "OK" / >

  < af:clientListener method = "handlePopupOkCancel" type = "action" / >

  < / af:commandButton >

  < af:commandButton text = 'CANCEL' id = "cb2" partialSubmit = "true" >

  < name af:clientAttribute = "popupAction" value = "CANCEL" / >

  < af:clientListener method = "handlePopupOkCancel" type = "action" / >

  < / af:commandButton >

  < / af:panelGroupLayout >

  < / f: facet >

  < af:outputText value = "Do you really want to switch tabs?" id = "ot1.

  inlineStyle = "do-size: medium;" Color: Red; "/ >

  < / af:dialog >

  < name af:clientAttribute = "tabToOpen" value = "" / >

  < / af:popup >

  < / f: facet >

  < / af:panelStretchLayout >

  Everything is done on the client side. When I click on a tab, first the "Unselect" event is fired for the selected tab and the value disclosed in this tab becomes false. After the value is changed, the listener is called.

  So in javascript, the same tab is released again after clicking OK.

  The value was not changed before calling the af: clientListener, this problem would not have arisen.
  

  
  

  Can someone help me with this?

  
  

  Kind regards

  Frédéric
  

  Change the as follows:

  The following has been tested against JDeveloper 11.1.1.7

  
  
      var theTabToClose;
      var theTabToOpen;
      function alertTabSwitch(disclosureEvent){
          var tab = disclosureEvent.getSource();   //This is the tab to close
          if(tab.getDisclosed()==false){
             theTabToClose = tab;
             theTabToOpen = disclosureEvent.getDisclosureCounterpart();
             var popup = tab.findComponent('p1');
             disclosureEvent.cancel();
             popup.show();
          }
      }
  
      function handlePopupOkCancel(actionEvent){
          var popupButton = actionEvent.getSource();
          var butPressed = popupButton.getProperty('popupAction');
          var dialog = popupButton.getParent();
          var popup  = dialog.getParent();
  
          if(butPressed == 'OK'){
              theTabToOpen.setDisclosed(true);
          }else{
              theTabToClose.setDisclosed(true);
          }
              actionEvent.cancel();
              popup.hide();
      }
      
  

• SLATE 7 VOICE TAB... OTG SUPPORTED. ???

  I want to know that if otg cable is supported with slate voice 7 tab? keyboard, mice are supported?

  ARE mobile apps to the sd card in the slate voice 7 tab?

  

  Hi AnirudhS, welcome to the Forums of HP. Unfortunately the 7 VoiceTab slate is not compatible USB OTG. The section "Input / Output" This shows in the HP Slate 7 VoiceTab Product Specifications

  Mouse and keyboard Bluetooth 3.0 should function properly.

  To install apps on an SD card, you must find a compatible 3rd party app to enable this.

  I hope that answers your questions.

• HP slate 5 voice tab ii: tab is unable to connect to internet

  The Tablet detects the home wifi network and shows a strong signal, but trying to connect it just makes the network as 'saved' but not connecting, even using the wifi protected Setup button. There is no password on the network and all other devices - computers portable tablets and phones - open a session with no problems.

  A possibly related problem is that during the visit of a café that offers free wifi, the slate is not yet detect the network despite the activation of the scan function.

  Hi there @psmith999,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that your Voicetab is hard to connect to your WiFi network and other networks, you tried. I'm happy to help you with this.

  Please report the full product for your VoiceTab number; so, please check the version of the OS you are using.

  How can HP and Compaq tablets - I find my model number?

  For now try a hard reboot and see if it works. Press and hold the power button for more than eight seconds. Once the tablet shuts down completely, wait a few seconds and then press the power button to turn on the tablet.

  Then try looking at the following page: connect to Wi-Fi networks - support.google.com/android-one

  If the network does not work for you, then I suggest you do a reset of the Tablet plant.

  HP tablets - performing a factory reset on your tablet (Android KitKat, Jelly Bean)

  I hope this helps and if it does not solve the issue then please mark this message as a solution.

• HP slate 7 voice tab, kitkat upgrade failed

  Hello

  my hp voice Slate 7 tab could not be upgraded to kitkal and crashed and sometimes I turn on the system.

  Now the tab has no BONES. Plese help out me my tab is brand new, age 1 month.

  Can I customer to contact Hp care? I'm not good in the technical stuff.

  Please help me

  Name of the company	Address	Service email ID	Service phone no.
  Jabil Global Services India Pvt Ltd.	Arcade Mudra, MIG 27, 1st floor, Nrupatunga Road, Kuvempunagar, Mysore	SRFR. Mysore @groups.iqor.com	91 7899760099

• HP slate6 voicetabii 6300ne: stock rom original hp slate 6 voices tab ii 6300ne

  Buongiorno mi chiedevo is e possibile avere stock rom original del mio hp slate voicetab ii 6300ne, negli ultimi giorni da mi a sacco di problemi e reinstallare I wanted it tutto con una nuovo sitema operating system, ho tried a rate reset di fabbrica my non ho solved grazie saluti

  Hello, I was wondering if it is possible to get the original point ROM on my hp slate voicetab ii 6300ne, these last days, it gives me a lot of trouble and I tried to reinstall everything with a new operating system is, I tried to do the factory reset, but I have not solved thank you.

• problem with changing the order of tab on tab control

  Hello

  I am aware that the same question has been asked over three years - but I can't yet find the problem in what I'm doing...

  Description: I have two controls tab, A tab with three tab and tab B with two controls on a Panel. For the following discussion, tab B is of no interest. Each tab control has several numerical indicators, of type integer and double. Now, I want to add a fourth tab control to A tab. This method works.

  Following and problematic stage, in the Publisher of the IUR I select the new tab (most right) and move two positions to the left. It's still ok until I try to display a numeric value of order of tab 3 (the new tab control is left to it). I get an error in calls to SetCtrlAttribute, complain about an invalid control ID... However, I didn't touch any control over the tabs, or add a new control. In addition, I did not touch the generated include file... Visual inspection did not show any changes in the include file (the new tab control is listed only when certain controls are added)

  Posting numbers on the first/far left tab control work only on 3 and 4 which are suitable for the new (and still empty) new tab will generate this error. Adding a control to the new label does not change the bahavior.

  Help is appreciated!

  Wolfgang

  Wolfgang,

  When you get the handle for your tab using GetPanelHandleFromTabPage:

  GetPanelHandleFromTabPage (MainPanelHandle, PANEL_TAB, 0, & TabHandle);

  the third parameter is an index for the specific tab you want to address.  If you change the order of the tabs, you can change the index, too.  For example, assume that you have a digital control on the third tab from left to right.  You want to assign some value, so this, you:

  GetPanelHandleFromTabPage (MainPanelHandle, PANEL_TAB, 2, & TabHandle);

  SetCtrlVal (TabHandle, TAB_numMyNumeric, 1);

  Now, you add a new tab to the left of the tab with the digital contorl.  The new tab is now index 2 and the original tab is index 3.  When you call:

  GetPanelHandleFromTabPage (MainPanelHandle, PANEL_TAB, 2, & TabHandle);

  you get the handle to the new tab.  There is a control with the same ID as TAB_numMyNumeric, so that you get a runtime error.

  Personally, I like to use an enumeration to my tabs so I can keep the lines:

  enum {MY_FIRST_TAB, MY_SECOND_TAB, MY_THIRD_TAB,...};

  So if I redesign the tabs or add a new one I just re - order enums and everything works fine.  Also, I used the same names in my constants of tab, to help keep things straight:

  GetPanelHandleFromTabPage (MainPanelHandle, PANEL_FIRST_TAB, MY_FIRST_TAB, & TabHandle);

  Tony G.

• problem with dhcp Cisco sg200 voice vlan

  I have cisco sg200 50 p connected to the switch cisco 3750. I just wanted to separate voice (vlan2) and data (vlan1) VLAN. I created vlan 2 as my voice VLAN and separate dhcp server for vlan 2 to give IPS for phones. However the phone ip connected to my voice vlan (vlan 2) does not receive the ip address of my dhcp server vlan 2.

  the dhcp server is connected to a switch with an access port (vlan2-voice) 3750

  two switches are connected through the trunk ports and allowed vlan 1 & 2

  IP phone is connected to sg200 via the access port (vlan 2).

  Note: there is a pc connected to the ip phone

  I'm really grateful if someone can help me with this problem

  Hi Ruchiran,

  To cover the base, ensure that VLAN 2 is added to the database VLAN on the 3750. Simple by using the command "show vlan id 2", if it is not found, you must first create the VLAN 2 on the 3750.

  Second, if you connect the same IP phone directly to the 3750 on an access port, vlan 2 unidentified, is the phone receives IP address as you hope?

  Then, on the trunk of 3750 connection to the SX200. Building the trunk when using a command like "switchport trunk allowed vlan remove 1-4094," then build the trunk more precisely with the VLAN ' trunk switchport allowed vlan add 2 "who will score 2 VLAN port." "

  On the SG200 switch, must be defined the trunk and VLAN Tag 2 on the port to connect to 3750 then the connection to the phone port should be 2 VLANS not identified as access port.

• Problem with 'Display the resources' - Summary tab

  Hello forum!

  I am with a problem, it is not critical, and I think that it is simple to solve. I have 3 servers ESXi 5.1, and I got these 3 with vCenter. When I try to check the memory and processor in the Summary tab, 2 servers show me 0% (see attached), only 1 of the 3 show me the correct information. If I use a simple vSphere client, that is to say, one by one, the memory and CPU is OK, the Summary tab.

  Can someone help me with this?

  THX!

  Hello and welcome to the community,

  Depending on your version of build you ESXi 5.1, and you must update your ESXi 5.1 U1a.

  Check this kb for more information:http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2038686

  Kind regards

  Julien.

• Problem with TabNavigator: content of one tab is 'Phantom' on another tab

  I created a tabNavigator... four tabs... the first three has similar headers, the fourth has a different header. each header has... filtering options all have a datagrid... the first tab is the default tab when loading the application. But here's the problem:

  When the application is closed on the fourth tab, and the app is reloaded, the fourth tab appears on the tab by default upon reloading, with the first tab header appearing as a ghost (but active but not effective on the datagrid control, which is filled with the content of the fourth tab)...

  How can I get it to load the default true tab (number one)?

  This isn't a problem if the two tabs or three are active when the application is closed/reloaded...

  I tried to use SelectedIndex [tabnavigator id] = 0; but that did not work

  If you do not need a history Manager, set the historyManagementEnabled = false.

  If you don't, set historyManagementEnabled = false anyway and try rather BrowserManager.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui