Problems with keyboard & mouse Windows 7 installation

Similar Questions

• Problem with keyboard/mouse/restore R100

  The password, typing in the addresses of web etc I get the input characters without touching the keyboard. On the web pages the scroll bar, irregularly jumps up and down.

  Restore did not work so I tried a complete restoration that failed repeatedly until he finally managed to finish. Each failure the following text is displayed:

  !!!!!! Error!
  Extraction failed

  All the flaws still exist and at startup I get profile change message when I changed nothing. Also had problems trying to put on the March and nothing happens.

  The laptop is blank and has no damage whatsoever. It has only been used a handful of times and is like new. The keyboard is displayed against any defect.

  Any ideas? Thank you very much.

  Hello

  Usually, after the recovery procedure, the device's own preinstalled and there should not be any problem. If you find that there are some problems immediately after the recovery procedure, it can really be a sign of a malfunction of the equipment.

• Problem with keyboard and mouse with Satellite C

  Hello!

  I HAVE BIG PROBLEM WITH THE MOUSE PAD AND KEYBOARD.
  THEY DON'T WORK AT ALL.

  I SEND A FEW MONTHS FOR THE SERVICE BECAUSE OF THE SAME PROBLEM.
  THEY FIXED AND NOW I HAVE THE SAME PROBLEM.

  I HAVE ENSURE PLUS.
  SOME PEOPLE TOLD ME THAT TOSHIBA THA SHOULD GIVE A NEW BECAUSE HE HAD THE SAME PROBLEM IN LAPTOP EVEROBODYS.

  WHAT SOMEONE HAS A QUESTION.
  WHAT HAVE I TO DO?

  > SOME PEOPLE TOLD ME THAT TOSHIBA THA SHOULD GIVE A NEW BECAUSE HE HAD THE SAME PROBLEM IN LAPTOP EVEROBODYS.
  Some people said you had a problem with any of the mobile world?
  .. .hmm statement very interesting but according to her simple nonsense.

  First of all every part is covered by the warranty s notebook. Standard warranty covers material for the first month issues 12. Of course, it is possible to extend this warranty

  In case the material part will begin a malfunction within this period, the part will be replaced in the warranty conditions. Otherwise if your warranty isn't valid more and you will pay for the replacement of equipment.

  In my opinion, the material must be checked properly to get information what part is malfunctioning.
  Maybe it s just a defect of operation of the keyboard or in the worst case, the motherboard
  It is difficult to say what's wrong so far in the part was checked.

  In case the external keyboard still works correctly, the card mother isn t touched and the new keyboard should solve the problem.

• Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STA

  Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STAFF. "What should I do? I am new to Iphone! If you could help me on this, it would be very appreciated...

  aarruunn, you might want to try Windows Installer Cleanup utility.

  http://www.MajorGeeks.com/files/details/windows_installer_cleanup_utility.html

• I have a problem with the mouse on the computer.

  Original title: the mouse is runging autour

  Help

  I can't control my mouse
  He does things on his own

  Hi Zooitje,

  Thanks for posting your question in the Microsoft Community.

  From the descriptions of the question, it seems that you are facing problems with your mouse.

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

  To help you solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer and the mouse?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3. you receive an error code or message?

  I suggest you run the troubleshooter and update the drivers by following the steps in the link below and check the issue.

  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab04

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

  
  

• Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2 now not authentic

  Separated from this thread.

  Joachim

  When first pose the problem? Was it before or after the December updates?

  KB3004394 and KB3024777 appear in view update history? Or do they appear in installed updates?

  Gerry, thanks for your post. I have the same problem as Joachim started this thread. I am running Windows 7 sp1. I have a Dell computer and it's certainly a legitimate copy of Windows (confirmed computer 'properties' and it is enabled).

  By your post, I saw just to update and the KB3004394 (installed on 12/10/2014) and KB3024777 (installed on 12/12/2014) show as comfortable. I usually leave the Windows download updates automatically and I install them to stop. I watched the second update and according to Microsoft.com:

  Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2

  The KB 3004394 update which was dated December 10, 2014 can cause additional problems on computers that run Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1. This includes the inability to install future updates. This new update is available to remove KB 3004394 from your computer.

  My problem is, as of today 14/12/2014, I still get the pop up "this computer is running not windows genuine', even with KB3024777 installed.

  Any thoughts?

  Thank you

  Bob C

  Right-click on CMD

  Click on run as administrator

  At the command prompt, type the following commands:

  slmgr.vbs - ipk xxxx-xxxx-xxxx-xxxx (to replace the specified in the current product key)

  xxxx-xxxx-xxxx-xxxx - represents your product key

  Press enter on your keyboard

  Then type: slmgr.vbs - ato (this will force the activation)

  Leave the command prompt

  Restart your computer

• Problems with my mouse, and have not been able to find a solution to the research on various forums.

  Original title: mouse problems

  I have problems with my mouse and have not been able to find a solution to the research on various forums. Here are the symptoms:

  1. you must click several times to get the menus to open. Sometimes they are not just and sometimes they open with a single click flash but do not stick until I clicked several times.

  2 several times the menu drop down and seem to become transparent (not in looks) because when I click on something on the menu, he actually selects everything that is behind the menu drop down. For example, if I'm in powerpoint and you select an item in edit mode, it might work and here again he can just select the slideview behind the menu and expand. Or well, if I'm on a Web site, such as Facebook, and I chose to close the session, rather than enable the disconnection of the key, he chooses some ad is behind the part of the menu and redirects the page of this Web site.

  3. when I try to select a Word, words or sections as paragraphs, it performs several different things: continually select as soon as I let go of the mouse button, the jumps of color selection in another part of the document, or deselects the part of the text before I even let go of the mouse button.

  Here is what I tried:

  1. I had originally a usb wireless mouse. I changed the batteries and then got a new. Now I use a wired mouse.

  2 make sure all updates for Windows and Office 2010 are updated.

  3 has tried to update the drivers mouse, says that it is up-to-date. He restored, did not work. Uninstalled and restarted.

  4 Ran Windows Security Essential and Malwarebytes - found nothing.

  5. ensure that all the Toshiba updates were up-to-date.

  I don't know how the word this issue properly in order to find information about it. Everything I typed in search engines brings me other problems unrelated to this one.

  I am running W7 64 x Home Premium SP1, SP2 MS 2010 with a mouse Dell; Toshiba Satellite C655

  Well I have stumbled on the fix... looks like there was a problem with the HID-compliant mouse. The convenience store hardware detected and solved the problem. Everything seems to work properly again.

• Problems with the mouse scrolling

  I have a Microsoft Wireless Mobile Mouse 1000 that I use on my laptop Dell Inspiron N5110 with Windows 7 Ultimate 64 - bit installed on it.

  Recently, the mouse wheel is crazy I've put it down it scrolls to the top, scroll down, done both or nothing. and this only happens when scrolling down, there is no problem of scrolling upward.

  I changed the USB port - in which I put the receiver - the only one directly attached to the motherboard. That gave me minutes of scrolling perfect without problem, but after having tried other ports he went crazy again.

  I tried to uninstall the driver from Device Manager and then put it back, but to no avail (I did for several ports)

  I should note that the problem itself is fluctuating, which sometimes means that the wheel is crazier than others and I tried the mouse on another laptop and the problem does not occur.

  Thanks in advance.

  Original title: Wireless Mouse 1000 - wheel had crazy

  Hello

  You did changes to the computer before this problem?

  I wish that you read the following article and follow the suggestions in the article.

  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091/en-us
   
  Hope this helps, if the problem persists with Windows updates, please get back to us. We are here to help you.

• Have a problem with M/S Windows Movie maker that started today?

  Have a problem with M/S Windows Movie maker that started today? When I add an audio link towards the file it double in the space. If the audio is at 3 min., now it is 6 min. Since it was just started is a problem on my end, or with the product? Spoke of a M/S tech and he told me to download the new windows live movie maker, but have the same problem. What I am doing wrong?

  It may be interesting to try to convert the audio file to the
  . Format WMA before you import into Movie Maker.

• Photoshop is slow... I have no problem with the computer (windows 8) mine

  Photoshop C5 is a bit slow... no problem with the computer (windows 8.0)

  Hi maxarcitecture,

  Suggest you to reset the settings of Photoshop and then check

  Using Photoshop | Preferences

• I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and I was tol

  I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and they told me there is a problem with the .pdf application and I need to contact Adobe Acrobat. This can be corrected?

  uninstall any version of acrobat is installed.

  clean by Download Adobe Reader and Acrobat tool - Adobe Labs

  Restart your computer.

  delete all to delete pdf files.

  If this fails, it is a problem of ms.  If this attempt is successful, then reinstall your acrobat.

• Problem with the Package Windows Installer... when trying to install ITUNES 9.2 and Quicktime.

  I bought an IPHONE 4 yesterday.  For more than 7 hours, I tried everything to download ITUNES 9.2.  I get the same error.  I spoke with apple as Microsoft.  I didn't PAY to get assistance from Microsoft yet and I hope I don't have to.

  Error: problem with the Windows Installer Package.  A program required for this install to complete could not be run.  Contact your provider to support personal or package.

  I have Windows XP.  I uninstalled and re-installed Safari and which did not help (at one point, I had problems with Safari).  I also have at one point received an alert on 'applesync.notifier' could not be executed.

  I have no idea where from here, but I'm frustrated.  I want to use my phone for something more than "just a phone" and I can't.  I have to carry my OLD Iphone (1st generation original).  Help<><>

  There is a simple way to do it!

  I had this problem too, but I did

  first open Installer u then let it install

  When you get the messege, click ok and it will say restoration of action but don't get put off by this cause after 5 min, it will say: it is installed and restart your computer

  hope this has helped

• iTunes won't download because of problem with Bounjour and Windows Installer

  I have windows vista and I can't use my itunes more.  I tried to download again and it says that there is a problem with C:\Program Files\Bounjour\about bonjour\.rtf.      It also says there is a problem with the Windows Installer Package to complete the download.  I can't find that anywhere in my computer files!  Help!

  I have windows vista and I can't use my itunes more.  I tried to download again and it says that there is a problem with C:\Program Files\Bounjour\about bonjour\.rtf.      It also says there is a problem with the Windows Installer Package to complete the download.  I can't find that anywhere in my computer files!  Help!

  Here are the Apple Discussions: itunes category, installation & Upgrading iTunes for Windows:
  http://discussions.Apple.com/forum.jspa?forumid=792 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Strange problem with keyboard

  Hi I bet that no one has an idea for my problem because I tried to find a sollusion for centuries.
  When I play games v b z and SPACEBAR keys of my work stoppage until I press alt gr + key menu, then they start
  work again. When I'm done playing and you try to use z b v and SPACEBAR again they stop working until I have press either
  menu or ctrl + alt + menu, then a box will come from the same box as SHIFT + F10. I ignore the box and my keys back.
  Someone at - it an idea, I reinstalled the driver for keyboard, reset my fonts, it gets really fustrating now?
  I'm on windows 7 64 bit and I have a laptop with a keyboard ps/2 base.

  Hi Grogun,

   

  Thanks for posting your question in the Microsoft Community.

  I understand that you are facing problems with your keyboard. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will try to help you in the matter of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the keyboard?

  2. you receive an error code or message?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  Follow the steps in the link below and check off the question:

  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

   

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

• Satellite M40X-184: problem with keyboard - only writes a character in 1 second

  Hello

  There is an interesting problem with my laptop, it cams with Xp Home edition with 1 partition, I used partition magic to create another and then format C:, after installation of XP Pro. Install drivers one by one, now when I try to write something in anywhere like msn, notepad or Word, she wrote just a character in 1 second;

  Like when I write "trial" he write in 5 seconds... Why what happened and above all how can I work this?

  Hello

  have you tried to uninstall the pilot how you installed? Maybe you should do this, I think it's probably just a software problem and no hardware failure.
  So you can also try to set the rate of your keyboard type in Control Panel-> keyboard control-> (delay repeat, repeat rate) and maybe it s just there a setting that needs to be corrected.

  Welcome them