Problems with LR 6 on my new iMac 27-inch with Retina display.

Similar Questions

• Can I use my imac 27 inches (mid 2011) as a second monitor for my new imac 27-inch 5K?

  Simple enough... I just want to know if my old imac can still be used as a second screen to my new imac 27-inch 5K.

  I have a thunderbolt cable to connect the two.

  Thank you

  Hi nomad2224,.

  Thank you for using communities Support from Apple!

  Whether or not you can use your old iMac as secondary screen for your new iMac (known as the target Display Mode) will depend on the model. You can find information and the steps in the following article useful:

  Use your iMac as a display with the target - Apple Support Display Mode

  See you soon

• "A problem with the display driver.

  Recently, I get an error message whenever I open Photoshop CS4. It reads as follows.

  "As Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  "GPU improvements can be enabled in the Performance preferences panel."

  I checked the graphics cards in Device Manager, and when I tried to update the software, it told me that I was aware.

  • OS: Vista Edition Home Premium
  • Dell Inspiron 1520
  • Display driver: NVIDIA GeForce 8400 M GS

  Sincerely, Danny

  Hello

  Try to update your display manually driver and do not use the analysis of the drivers on the manufacturer's website either.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Problem with the display of Adobe PDF documents

  Problem with the display of Adobe PDF documents

  I have a Windows 7 Home Premium computer

  I read all the suggestions and I tried to download several versions of Adobe Reader for Windows 7 and Vista http://get.adobe.com/reader/otherversions/.

  Before you download each version, I would delete the current version with uninstalling programs for the control panel.

  After each new installation I shut down the computer and restart the computer.

  I tried to download the versions with and without going through my antivirus (CA Total defense) running.

  After downloading, I thought that the version downloaded successfully.

  I have read the help of Acrobat http://helpx.adobe.com/acrobat/kb/troubleshoot-reader-installation-windows.html and followed the instructions.

  None of the above helped.

  The problem is that any version of Adobe Reader, download, I can't open a PDF file and read it. Or the drive itself will remain open.

  1. If I try to open the drive from the desktop link or real program menu, the Player opens for 5 seconds and then closes spontaneously. If I try to click on the Player menu (File, Edit, View, window, help, tools), then an alarm will sound and the menu does not open. Soon after, the reader is closed.

  2. If I try to open the drive by double clicking on a PDF file then the Player opens but the document is not displayed (only the grey player screen PDF is specified), then the drive closes after 5 seconds on its own.

  The desktop shortcut shows like 'red icon Adobe Reader'. But the real program menu icon shows as empty a folder icon.  All documents in PDF format displayed as Adobe PDF icon.

  I tested several PDF files and none will open on this computer, but they will open on other computers.

  I created a word document and saved as a PDF file. It looked as if it had record properly (a the appropriate icon) but when I try to open it according to point 2 above the document is not displayed and then then the drive closes after 5 seconds on its own.

  Anyone have any ideas on what is happening and how can I fix?

  Could you please respond in this forum and send me an email at [deleted]

  I'm so confused and frustrated.

  I would try Windows Explorer, navigate to C:\Program Files (x 86) \Adobe\Reader 11.0\Reader, and then double-click Eula.exe and accept the license agreement

• I have Macfuse and NTFS - 3G on my new iMac 5K of the retina; OSX 10.11.4... I think I have migrated my old iMac. I need these two applications please.

  I have Macfuse and NTFS - 3G on my new iMac 5K of the retina; OSX 10.11.4... I think I have migrated my old iMac. I need these two applications please.

  Only if you use Windows formatted disks, and if you do, I would check the updates first.

• (2008) old iMac 20 inches for the new iMac 21 inch Retina connect

  My new iMac 21 inch Retina has just arrived and I discovered that I have no way to transfer the files.  I thought the two iMacs had FireWire, but the new iMac has something called Thunderbolt 2 connections on the back. Surely, the Firewire cable will connect NOT together these two Macs.  What should I do now?

  Use a FireWire 800 adapter Thunderbolt.

  (136997)

• Problems with the display of the 3D graph

  Hello world

  I use a 3-d chart in one of my screws and I have problems with the display. See what it shows by yourself:

  

  So, as you can see, the chart does not correctly display the data. But one thing I know, is that the data are sent correctly, because when I copy the LabVIEW graphic and paste it into paint, what I see, this is the graph displayed correctly:

  

  Anyone know what may cause the problem? I also have a similar problem with a waterfall in 3D.

  You can always download the updates of ni.com so.

  I also went through a documentation on known LV 2011 issues. I was able to find something interesting onthis page:

  3D image controls can display transparently or LabVIEW crash on some graphics cards

  The 3D Picture Control is based on an OpenSceneGraph that uses OpenGL. It was noted several reports of the 3D image control crashing LabVIEW. In almost all cases, it was an Intel graphics integrated into question. This accident is due to a mismatch of the graphic material. Note: most 3-d charts use the 3D picture control

  Some possible workarounds are:

  • Update the video driver
  • Enable/disable hardware acceleration
  • Enable Aero in Windows 7
  • Disable Aero in Windows 7

  I might try these workaround solutions and see if any of them work for you.

• Photoshop has encountered a problem with the display driver cs6 - win7 64 bit

  Hello

  I installed collection CS6 Mater, whan I tried to enter in photoshop I got this window «photoshop has encountered a problem with the display and temporarily disabled driver development using graphics hardware...» »

  Whan I get is window, the "parameters of the graphics processor is gray - «photoshop detected a problem in your display driver...»» »

  I have laptop with AMD Radeon R7 M260

  Win7 64 bit

  PC Toshiba laptop satelite l50 - b

  Hi doriv,

  • Update your graphics card driver.
  • You have the graphical configuration Swichable?
  • As Mylenium says you must add this parameter in graphic control panel so that Photoshop can detect your card.
  • Open graphic switchable Configuration and add sniffer.exe and Photoshop.exe (from C:\Program Files\Adobe\Adobe Photoshop Cs6). See graphics switchable troubleshooting questions unde... | Community

  

  Kind regards

  Assani

• I get the message: Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Photoshop has been giving me the warning:

  Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Also other programs are affected.  I suspect a recent download of Adobe.  Can anyone HELP.

  No, it has nothing to do with updates of Adobe. There is a problem with your video card driver.

  Go directly to the Web site of the manufacturer of the GPU for updates (not Microsoft, not a System Builder).

• Photoshop has encountered a problem with the display driver

  I've updated photoshop on my mac last night as it kept prompting me to do, and I have an exam tomorrow, which requires the use of photoshop. When I open photoshop this morning the following message appears:

  "Photoshop has encountered a problem with the display driver and has temporarily disabled the improvements using graphics hardware. Visit the Web site of the manufacturer for the latest version of the software. For more information, visit: http://www.adobe.com/go/photoshop_gpu_cc_en'. '.

  Can someone help me with this? IT IS URGENT!

  The problem is the driver for your video card, no Photoshop.

  Update the video card driver from the website of the manufacturer of the GPU (NOT Microsoft or a system integrator).

• Acrobat fuzzy XIPro with retina Display MBP

  I have the new 15 "MBP with retina display and my PDF documents, opening in Acrobat XIPro, seem extremely blurry even when the majority of the file's vector graphics based. In fact, the interface of Acrobat is extremely blurry. The file looks like perfectly crisp and clear when displayed using the Viewer from Apple software. Is there a solution? Is Adobe behind on an update for this problem? I've already messed around with preferences without result. Thanks for your help...

  Hi jaytahoe,

  There are some update: Retina display will be fully supported for the next quarterly release of Acrobat and Reader XI, who could be available in September.

  Thank you for your patience.

  Best,

  Luke

• My MBP with retina display has no top file, but storage information still show a lot of memory being exhausted by audio, photos and movies.

  Recently, my MacBook Pro with retina display has started to run out of memory, so I moved all my downloads and stuff in my external hard drive. After the transfer, I had some good 20 GBs free and my folder all my files to completely empty.

  

  But even now when I go into storage under the about this Mac information, it shows that more 1 GB of audio files, about 800 MB of photos and 500 MB of movies.

  

  Using the search option (and put a black space in the search bar), I discovered a few files in the Mac section, but they were barely a few MBs in size, and no audio or images or movies were present there.

  Where are all these "hidden audio, photographs and films that take about 3 GB of space from my hard drive? I am naïve.

  Here is my overview of the system:

  ********************

  Any help will be much appreciated.

  Thank you!

  < image edited by host to remove the serial number >

  This view will be incorrect until the Spotlight indexing your drive. In addition, it is only an effort to classify the files types are known by their file extension. Thousands of files on the computer, however, will only be classified as 'Other' because they did not have a type that falls into one of five or six available categories. If you want an accurate display of disk space then: press command-I to open the window read the information. In the top panel is a visualization of the status of your drive: capacity, used and available. It's everything you need to know. If you want information on the types of files and their location, and then use a tool such as OmniDiskSweeper or GrandPerspective.

• How to connect an old 23 "Cinema Display to a MacBook Pro 15 inch with Retina display

  I have an old 23 "Cinema HD Display, part number M9178LL/A and want to connect it to a recent MacBook Pro 15 inch with Retina display 2104.

  The Cinema Display has a power adapter and 3 USB, Firewire connectors and a DVI (think that's what it's called).

  The MacBook Pro has USB, Thunderbolt, and HDMI ports.  I have a crush on Firewire adapter, but I don't know what I need to plug the DVI or if it will work.

  I also remember that years ago Apple sold "docks", so that you can use your laptop with a keyboard and a standard monitor.  Is this always the case?

  If anyone can help?

  Thank you very much.

  Adapt you the Thunderbolt computer monitor DVI connection (use a Mini DisplayPort adapter) or HDMI port. USB and FireWire connections are only needed if you plan to use the screen as a hub.

  (138898)

• a macbook pro with retina display becomes hot when in use?

  A macbook pro with retina display becomes hot when in use?

  Yes.  All of the skin of the MBP is part of the evacuation of heat, not only the arriere-charniere event.  That's why running the MBP on a hard flat surface is better, so the room air can cool down all surfaces.  He put on a hidden or your knees when running may block exposure to air.

  High intensity running video uses graphics and CPU harder, needing cooling.

• ITunes problem previous library playing on the new iMac 4K

  I just bought an iMac nine 4K El Capitan 10.11.1 running with iTunes 12.3.2.35. I also bought an iPad opportunity Air 2 out of glideslope. IPad is strictly for the use of music that I am a musician. Since I am unable to "migrate", I copied my old iTunes library on a hard drive, external, built of new playlists on the new iMac and then downloaded on the new iPad. (The HD was only a way to transfer the music.)

  It's just a few of the songs on the iPad part - but they all play in iTunes on the iMac. As you can imagine it's very frustrating because I spent two great to finally have a platform of music to date.

  Does anyone out there have a solution to this problem. Any thoughts would be greatly appreciated. Especially of Kenichi Watanabe, who has been most helpful.

  Thank you very much

  Michael Fitzgerald

  PS: This is my first attempt at using a Forum and don't know yet how come back for possible answers. Therefore, my email is [email protected].

  I know, I'm a model. I'm sorry.