Problems with microphone? + other multimedia USB device asks :)

Similar Questions

• Video device USB has a driver problem__ __There is a problem with the driver for USB video Device.__Device information __Name: __ID USB video device: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 code __Error: 10 _ _ _

  I hava a dell inspiron 1440 with windows 7 and a a few days ago, my webcam was working just fine but know that it gives me this after troubleshooting

  Has a USB video device driver problem

  Not fixed

  There is a problem with the driver for USB video device. The driver must be reinstalled.

  The device information

  Name: USB video device ID: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 Error code: 10

  Hey laloo.16,

  As the error message states clearly that reinstalling the driver is required, please do the same. You can uninstall the driver that is currently installed from the Device Manager.
  To access Device Manager:
  1. go to start and type Device Manager.
  2. Select Device Manager in the control panel list.
  3. go to your device.
  4. to remove:
  Right-click on it and select Properties.
  5. Select the driver tab and click on uninstall to uninstall the existing driver.
  6. close Device Manager.
  Now go to the link below. Download the Dell WebCam software for your product.

  http://support.Dell.com/support/downloads/DriversList.aspx?OS=W732&CATID=-1&DateID=-1&impid=-1&OSL=en&typeid=-1&FormatID=-1&SERVICETAG=&SystemID=INSPIRON1440&hidos=WLH&hidlang=en&TabIndex =

  Please choose the appropriate version of Windows 7.  Install the driver and see if that brings your webcam to work.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with the port replicator USB 2.0 after installing Windows XP - SP2

  Hello world

  I have a Satellite M30 742 with MS-Windows XP Professional installed. I plugged most of my external devices to him through a port replicator Toshiba USB 2.0. Everything seems to work fine until I installed Service Pack 2.

  Therefore, starting my laptop computer is an adventure to recognize random port replicator: usually four USB ports are recognized, but the ports series and parallel, keyboard and mouse ports are ignored, with a message "unknown USB device".

  Uninstalling and reinstalling, them or their drivers are a vain effort, since Windows keep ignoring them.

  However, in other occasions, they are recognized without problems (even if windows insist on installing their drivers each time that it finds, even if I have already installed a large number of times).

  Please, you have an idea to solve this problem * boring * problem?

  Thank you very much in advance,
  Ricardo.

  Hello

  what you might try is to reinstall the chipset driver because I think that the USB is connected to the chipset.

  In my opinion the Windows upgrade had changed the pilot USB from Toshiba a MS a. So the Port Replicator is not recognized all the time.

  Rudi Bye

• Re: Problems with Microphone when I use Skype

  Could anyone help with the problems I am experiencing with the microphone when using Skype?
  I also tried to use an external, but still problems with the other person can't hear me, y at - it a setting I can adjust its been to Toshiba and they said that there is no fault.

  Any help would be appreciated.

  In fact internal mic works well with Skype.
  All you need to do is enter the sound options of Skype and check the settings there especially if you use the headset.
  Play around with these settings.

• Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Sorted now

• Problem with Zoom-In in cellular devices

  Hello

  I have problems with zoom-in in cellular devices, I was wondering if there is a way to fix it. Here is the site for my Web site

  Thank you

  You create a mobile version of the Web site. This is necessary for SEO now anyway.

• I have a problem with finding a PnP USB audio device when you search for available audio devices.

  Hello.

  I am building an application that can find a PnP USB audio device and play a tone if the device is connected. I am able to search audio devices using "Sound Device Info.vi" of the lvsound2.llb that comes with labview.

  The vi can find the USB device in good conditions, but there are problems - I'll try to describe 2 scenarios.

  1. the USB device is connected before 'Sound Device Info.vi' is called for the first time.

  In this case, the program can find the USB device. If I unplug it, the device disappears from the list of found audio devices. If I reconnect to the same USB port, it reappears in the list. It's all good.

  If I reconnect it however a new USB port, the device is not found. This is not good.

  2. the USB devices is not connected when 'Sound Device Info.vi' is called for the first time.

  "Sound Device Info.vi" is not able to find the device. Disconnect and reconnect does not make a difference.

  I'm under labview 2012 on windows 7.

  I am running the application as an exe to build.

  I call 'Sound Device Info.vi' as a 'call for reference"and the reference is closed between calls to the vi. I was hoping this would unload the dll used in "Sound Device Info.vi" and would solve the problem, but it didn't.

  Is there a way to reset the information usb labview during execution?

  Concerning

  Stephan.

  Hey Stephan.

  The sounds screws require a DLL located in:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2012\resource\lvsound2.dll

  Internally, LabVIEW uses the DirectX API to enumerate devices. The one caveat is that probe us for devices when loading the DLL. We probe not later. So that it works for Bluetooth, USB, fire wire, etc. devices that can be inserted or removed at any time, you control somehow when this DLL charge and discharge. To do this, please see the following document:

  Dynamically that I can load and unload a DLL in LabVIEW?

  http://digital.NI.com/public.nsf/allkb/77594203D78D12278625729100758BE5

  I would also recommend that you provide a Kudo to this idea:

  Updated library lvsound2 (Sound Input/output Sound live) to support audio devices change on the fly

  http://forums.NI.com/T5/LabVIEW-idea-Exchange/update-the-lvsound2-library-sound-input-sound-output-V...

• Problem with ZTE MF190 Dongle (USB Stick Modem)

  I have a ZTE MF190 Dongle (USB Stick Modem), which is a plug-and-play device. It was to find work on my Windows 7 Ultimate with my Acer Aspire 4720Z but recently it does not HSPA or any other signal, unless I have to uninstall and reinstall all the time before using it. When I do this, it installs the following drivers:

  Composite USB device
  ZTE Diagnostics Port (COM6)
  ZTE to Port (COM7)
  ZTE ATExt2 Port (COM5)
  With a Modem ZTE USB owner
  Network adapter Broadband Mobile ZTE
  USB Mass storage Device
  ZTE MMC storage device

  But he informs me that "ZTE WCDMA Technologies MSM" cannot be installed.

  This missing driver would be the reason why I am facing this problem. If Yes, where can I get this coz I looked everywhere including the website of the manufacturers without result.

  Hello

  Certainly, this looks like a problem with the drivers. The manufacturer has a way you can get in contact with them at all? It is the responsibility of the manufacturer to write drivers for the devices that are compatible with Windows.
  Another thing to do is to make sure to have all your drivers chipset update of the website of the manufacturer of the computer.
  You say that you have an Acer, so go here: http://support.acer.com/us/en/default.aspx
  You can find model specific computer and download all the drivers updated in need of your system.

• Satellite A205-SP5820 - problem with microphones

  Hello

  I have a Toshiba Satellite A205-SP5820, and it's been almost two months that my microphone stopped working (external & the built). Today, I installed three different drivers (the one downloaded from softonic, one page Web from Toshiba and the other from Realtek)
  They still do not work.

  What can I do?
  Thank you.

  That really strange, you have this problem with the internal and external microphone.
  The configuration of the laptop is not known to me, but if you have tried the mixture of different drivers I don't think it is unique to the pre-installed driver.

  I think that best option for you will be clean OS installation but using the Toshiba recovery image you have with your laptop. Toshiba recovery image contains fine work and drivers tested so if the problem will still be there, it can be hardware only question about.

  Clean OS installation option is right for you?

• Problem with ZTE MF190 Dongle ("USB mass storage) with the group policy restricted USB storage.

  Please

  I have windows 7, Member of the domain, we created the policy in the domain controller to restrict any USB storage device and it works well.

  My problem is: when I install ZTE MF190 Dongle (USB Modem Stick) first time as administrator it work well, but when restart windows and switch the usb modem, connect as user limited to work, it has not detected (Modem USB Stick) in windows and I found in the "USB mass storage" Device Manager with yellow mark and tied to the usb modem.

  My question is: how except "USB mass storage" which associated (Modem USB Stick) of limited strategy of USB storage for the usb modem work.

  Note: I've updated "USB mass storage" windows with compatible driver (USB composite device), the modem worked, but when restart it windows that the same problem with "USB mass storage" brand yellow and usb modem not detected again in windows.

  Help, please.

  Hi Yahia,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

• Problem with microphone recording in Windows 7

  Original title: problem with the microphone

  Sir my drivers are perfectly fine but my microphone does not work and my default set and apply the buttons are grayed out in the record of devices.when im trying to put my problem its evrything saying isn't alrght theres no problem in my drivers... when im recording my voice, I found another seems not my voice... what should I do Sir

  Hello

  1 - is a built-in microphone? If Yes, what is the brand and model of the computer?

  If not, then what is the brand and model of the Microphone?

  2 did you recent hardware or software changes to your computer before this problem?
  3. what applications do you use to make use of the Microphone?
  4. are you able to record sounds using the sound recorder?

  5. what exactly do you mean when you say an different sound and not my voice?

  I suggest you to follow the steps and check if it helps.

  Method 1:

  Try to run the Audio recording utility and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  Method 2:

  I suggest you to check if the microphone is set as default as playback devices.
  a. click Start, type Sound in the area start search.
  b. click on his research at the top of the start menu.
  c. click the Read tab. Notice the check mark next to the default device. For most users, the default device is speakers. Make sure that the audio settings are configured as expected. Follow these steps:
  d. on the Read tab, select the playback device, click Properties, click the Advanced taband make sure that the default Format is set to the value you expect. When you are finished, close this window to return to the previous window.
  e. on the Read tab, select the playback device, click set upand make sure that the configurations are set correctly.
  f. Select the audio device you want as default audio deviceand then click on set default.
  g. click OK to save your settings and close the sound dialog box.

  Hope this helps and keep us posted.

• problem with the CD/DVD ROM device

  Windows nofified it is problem with my CD ROM havin - two of them! I tried Windows troubleshooting. He tried to reinstall the driver but it failed.
  Then I tried Windows Update to see if I can find an update of the driver but he could not find any update related to my CD ROM
  Now I don't know wt to do at all!

  Hi khadija.

  1. you receive messages or error codes?

  You can read the following article and see if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Hope this information is useful.

• Problem with the network - ACS 4113 device configuration

  We have problems with two particular devices. I'm trying to delete and add devices, but when I do a search and go to their intellectual property, I get.

  Impossible to edit blahblah.ourdomain... Reason: The host no longer exists.

  How can I get rid of this so I can readd devices?

  Thank you

  Dwane

  How many characters is the host name. If more than 32, you will not be able to change it in the GUI. Use the CSUTIL to remove. Re-create it with less than 32 characters.

• Problems with audio playback on mobile devices

  Each project we export and reading on mobile device has a problem.

  We hear only audio track 2 off maybe 3 on different projects. Our audio tracks are stacked like this:

  Track 1 - camera Audio / dialogue

  Track 2 - music

  Track 3 - sound design (some projects, not all)

  None are dumb or the solo. Mounting on Windows 7 and using the YouTube 1080 preset for export.

  Someone at - it a problem with this and how to solve?

  This looks like a problem of audio phase, see:

  Re: audio missing on vimeo and youtube

• Firefox has only display problems in the upper left region of only my Dell U3011 monitor; the monitor does not have these problems with any other application

  Some parts of the Firefox window are translucent, allowing the image of the desktop to show through. These regions are anything but great internet site central image which behaves normally. Unless the desktop is completely black this problem makes reading the tabs, address bar and the bookmark are difficult if not impossible. I encounter this problem only on my new Dell U3011 monitor. Firefox is the only application that has this issue on the Dell monitor. The monitor built into the laptop that animates the Dell monitor does not exhibit this problem. The laptop is a Lenovo W540 running Windows 7 64-bit. Thank you very much for your help. Steve Schupbach

  Hello stevesch

  first see : problem with Firefox going transparent troubleshoot and find a solution

  then with patience to see:

  questions/940393

  questions/940389

  questions/940374

  questions/940377

  questions/940384

  questions/940395

  Thank you