problem with the CD/DVD ROM device

Similar Questions

• Problems with the software DVD-ROM discs

  My hard drive is not always save when I insert my Sims 3 disc. They are the software DVD-ROM discs. Recently, I was able to install a new but have not been able to get my computer to record the disc since then. How can I solve this problem?

  Hello

  1 are. what software you referring?

  2. what operating system is installed on the computer?

  3. you remember make changes to your computer before this problem?

  Try the steps in the following article: your CD or DVD cannot read or write media http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us

• I have a problem with the CD/DVD-rom does not.

  Original title: CD-ROM/DVD-ROM and drivers

  Hello

  My DVD Samsung writer stopped working.  The model (SH-222) is a plug-and-play using CD-ROM/DVD-ROM drivers of the window.
  -cdrom.sys version 6.1.7600.16385 (win7 - rtm.090713 - 1255) in the folder: Windows\system32\DRIVERS\ and.
  -GEARAspiWDM.sys version 2.02.03.00 in the folder: Windows\system32\drivers\.

  I get the following error in the configuration of properties of CD-Rom drive: "Windows cannot start this hardware device because its configuration (in the registry) information is incomplete or damage (Code 19).»  I tried the windows troubleshooting hardware request without success.  I even swapped the the DVD burner with a new model of Samsung (SH-224) with the same results.

  I cleaned my registry using the "download free CCleaner.  I have a knowledge base of the obligation to register, but not enough to run an editor from the registry on the registry file itself.

  What are my options?

  Mario

  I cleaned my registry using the "download free CCleaner.  I have a knowledge base of the obligation to register, but not enough to run an editor from the registry on the registry file itself.

  http://support.Microsoft.com/kb/982116/en-us

  Your registry may be damaged. (Code 19)

  This problem occurred after cleaned your registry using "CCleaner database"? If so, then when running CCLeaner you would have the option to backup the registry keys. If you did, perhaps restore the backup keys. If not, read the article above (do not rely on the fixit).

• HP Support Assistant unable to fix a problem with the CD/DVD not detected

  I have a G42-415DX laptop and I can not read cd/DVD, it was working fine 3 weeks ago and now nothing / I tried the support assistant and he could not solve the problem.  I got a message saying the driver must be reinstalled, how do I reinstall the driver?

  Hello

  If you do not get the chance to use another PC, I would definitely create the CD and the DVD bootable as it would give a clear indication if there is a hardware problem with the optical drive.

  In the meantime, try following the procedure in the title of the subheading "Let me fix it myself" on the link below to remove upper and lower filters (if these registry keys exist) and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  If find you the following registry keys and delete them, restart the laptop before checking the disc.

  Kind regards
   
  DP - K

• Problem with the support of ROM of DVD double layer

  I just bought the edition of Adobe Creative Suite Premium Web 6 DVDs I have have not yet opened the box and noticed that it is said that one of the requirements of the system is dual Lyer DVD ROM support is necessary. My question is, is it a requirement for one of the tools, or I won't be able to install the software, I don't have a DVD-ROM with support double layer?

  Hi adobe_new_product_user,

  DVD ROM is only necessary if you are installing the software using the disc.

  Generally most computers nowadays have double layer DVD ROM.

  Incase if there is no problem, you can also download the product and then install it

  http://prodesigntools.com/Adobe-CS6-direct-download-links.html

  Thank you

  Kapil

• Satellite P10 problems with Mat * a DVD ROM

  Hello

  I have a problem with my P10,
  I bought it for 2 months and 4 months ago my
  Carpet * a DVD ROM does strange things.
  When I try to copy a CD for example, it reads the cd source, after I put in those recordable, it starts to burn and suddenly it stops, says ERROR (Event Viewer: error on Controller\Dev01\CD-ROM) and my Combo drive is presented as a 'simple' DVD - RAM on Solution Explorer drive.

  Sometimes it won't read movies on DVD or CD so I have
  to restart the P10 and generally it can read the disks after that.
  So is my faulty drive, the card mother or just me?
  Have been looking for a new driver, but there is just a
  DVD-RAM, no driver for the drive itself.

  Hello

  Maybe the contact of the cable to the controller and CD player is loose. The error message said you it should be good!

  Your P10 is under warranty so bring a call Toshiba and it need to be repaired or a Service partner!

  Hans Bye

• Equium A200 - problems with the CD/DVD-RW and Realtek HD driver

  I'm having some trouble with my Equium A200-1VO.

  First of all, I can't get the CD/DVD-RW to write any dics. The Player opens also from time to time.

  Secondl, I just downloaded and installed the latest driver Realtek HD audio, under the guidance of Toshiba, to see that when I plug my headphones the sound always comes out of my laptop speakers.

  Any help or thoughts?

  Thank you

  Now, he can be really problematic. If you use your own installation of the OS, no one can say with certainty what can be the problem. Each laptop manufacturer, including Toshiba, offer recovery image installation and in using the factory settings, everything should work well. These recovery images are tested and they offer all the hardware and software features.

  Maybe you should install Vista using recovery media supplied and check if all these problems are happening again. If yes then we can talk about the unusual and serious issues.

• Pavilion g6-2306el: problems with the recovery DVD-R discs

  Hello, it's only now that I saw that the DVD + R is suggested for all recovery discs burning. A little too late for me, since I bought several DVD-R to produce my game. Here is what happened: each disk has been created with difficulty; the burning process failed on all the others try. But in the end, I finally got the DVD-R 4 program have been burned and verified correctly. Now, when I tried to insert each disk to make sure that the laptop was able to read properly (the content supposed to be confirmed, after all), to my horror, I realized the first two discs were not being recognized. However, my patience was rewarded when, after a long time, suddenly, an Explorer window showing the contents of the disc. Taking advantage of the situation, I immediately copied this content in a folder on the desktop. It took me a long time to do this process for the content of the first two discs that had recognized problems. Subsequently I also copied the contents of the discs 3 and 4, which was much faster. Now, I have four folders with the corresponding content of the recovery disks in the office. The question is: can I use these content and burn on DVD + R this time, in order to have a working set of recovery disks? Thank you very much.

  Hi @anthony_s

  Thank you for your query.

  I understand that you have created your recovery on the wrong type of DVD disc and does not work.  You have copied the contents of folders on the desktop you and want to know if you can now create new recovery DVD on the appropriate type of files.

  No, it will not work.  I suggest that you contact HP support and inform about events and inquire about obtaining a recovery kit.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  I found this link on the HP forum, that you can read, I don't know if it works or not. Please let me know if it is successful.

  This is how to do a 2nd set of recovery disks.

  Good luck!

• Problem with the driver for Audio device high definition

  I have a Windows 7, 64-bit, Studio 1558. When I started the computer about a week ago, I was a message that the Service Notification of system events cannot connect. I checked the event log and found error 7022, where it says that the audio device was suspended. After some research and experimentation, I made the error go away by turning off the (Microsoft) High Definition Audio Device Driver, Version 6.1.7601.17514. However, now I have no sound. I tried updating the audio driver for my computer (IDT 92HD73C1 Audio, v.6.10.0.6267, A18), but this doesn't seem to work, and now I returned to a previous restore point to go back to square one. I'm not sure what caused the problem. Some said similar positions that he was leaving headphones plugged to power off the computer. others said that the use of cmd-> "netsh winsock reset" would solve the problem (of least temporarily). Any of these seemed to help me. Basically all I want to do is to install a sound device driver that works. I hope someone can point me in the right direction to do so. Thanks for any help provided.

  DellRaiser

  I tried updating the audio driver for my computer (IDT 92HD73C1 Audio, v.6.10.0.6267, A18), but this doesn't seem to work, and now I returned to a previous restore point to go back to square one.

  I can't say that if you were not able to install the driver IDT or if you installed but got the same error message.

  If the first case, try to download one of the files directly from the ftp server of DellIDT.

  If the latter, if you get the same symptoms with the IDT pilot and the native Windows (high definition Audio Device) driver so it is difficult to see the drivers as the cause of the problem, because it is rare that two drivers have the same failure at the same time. Here's how to switch between the 2 pilots:

  1. open Device Manager (type devmgmt.msc in the start search box and press ENTER) and right click on IDT High Definition Audio Codec.
  2 Select this option to "Update driver software".
  3. click on "Browse my computer for driver software".
  4. click on "Let Me pick from a list of drivers on my computer".
  5. put the "Show compatible hardware" check box if not already checked.
  6. in the list of devices, click on 'High Definition Audio'.
  7. click on "next".
  8. in the update driver warning box, click 'Yes' (the driver).
  9 restart the portable computer if you are prompted. If not invited, so no need to restart.

  To reverse the process, change the names in steps 1 and 6.

• Problem with the network - ACS 4113 device configuration

  We have problems with two particular devices. I'm trying to delete and add devices, but when I do a search and go to their intellectual property, I get.

  Impossible to edit blahblah.ourdomain... Reason: The host no longer exists.

  How can I get rid of this so I can readd devices?

  Thank you

  Dwane

  How many characters is the host name. If more than 32, you will not be able to change it in the GUI. Use the CSUTIL to remove. Re-create it with less than 32 characters.

• Problem with the CD/DVD on Satellite A300D (PSAK0E) device

  Hello

  I installed Windows XP Home edition on my laptop yesterday, everything was fine, but now I can't use the CD unit at all. It does not open, and when I open it manually (with a clip or something like that) the device does not read the disk in it.

  Any idea?

  Thank you for your attention and your time.

  Post edited by: Indie

  Hello

  STI's optical disc drive listed in the Manager of devices or Windows Explorer?

• Satellite A135 - problem with the CD/DVD burner

  Hey guys,.
  A few days ago as nearly a week ago I had burned an audio CD for myself and it worked perfectly. Today when I tried to burn an image on my DVD, disaster. I use two software. IMGBURN & NERO. Unfortunately both failed me. What is happening is that the burning process starts normally, it shows that the buffering and burning taking place as well as caching of files. "Finally, it shows the burning process has been a success, but when it comes to verification, the drive appears saying: data verification failed - too many errors (Nero) and for IMGBURN it says ' they layouts do not match. When I reinsert the DVD, it shows that it is completely empty. Although both claim that the fire was successful. Later, I tried to burn a data dvd, still no luck, engraving, he shows successfully but verification fails and reinsert is empty.

  My laptop is: Satellite A135
  CD/DVDROM: TSST CORP TS-L632D ATA
  OS: Windows

  the default windows was vista when I bought it.

  Hello

  If you can't burn DVDs, then you should check first if it is a software problem based question or related equipment.

  I've been reading about the reader of CD/DVD burning questions and as many times the registry has been corrupted.
  Means that you was able to burn the DVD after you remove the upper and lower filters in the registry. Google for it and you'll find many pages.

  Is there a problem of CD/DVD drive, then you should find a good update on the page of European Toshiba driver in your laptop. If there is no update firmware, then it means that this firmware is ok and it s not necessary to date.

  Last but not Lea not all CD/DVD drive are compatible with all drives (CD and DVD).
  Why? Because the different CD and DVD manufacturers produce own using different standards. In this case, it may be possible that not all discs will be properly treated

  I had the same problem but might solve this problem by using TDK R CD or DVD

• Removal of security icon to remove a mounted cd/dvd drive that can not be delete. also the problem with the apple driver.

  Vista Home premium

  64 bit

  HP pavilion dv4-1220us

  It happens when I went to open I tunes and he indicated a problem with the cd/dvd and then I noticed security remove the icon at the bottom of the screen, attended safe remove and it delete my CD-ROM drive mounted cd/dvd look no further and I notice this driver is part of apple who was a pilot of speed indicating this driver will remove your drive of cd/dvd rom IS NOT WORKING WITH some programs installed.  I contacted apple, we have deleted the driver and complete the process with the driver of the machine. Now, this does not take care of the security delete icon then tech apple tried to help and communicate with Microsoft or hp.

  RESTORE MY COMPUTER SEVERAL TIMES, THIS ICON IS STILL THERE.

  DOWN MY BIOS AND THE ICON IS STILL THERE.

  THIS SCANNER DRIVER AND THE ICON IS STILL THERE.

  Security delete icon States: remove TSST CORP CD/DVD TS-L633L ATA DEVICE READERS of CD-ROM/DVD-ROM if I hit remove it will remove my CD/DVD-ROM DRIVE.

  I went on my computer and click on my cd/dvd rom drive and went to properties and that's what I found below.

  1. FUJITSU MHZ2250BH G2 ATA HARD DRIVE: WENT INTO PROPERTIES TO DISPLAY DRIVERS, IT HAS A HPDSKLFT. SYS DID NOT SIGN THE OTHER TWO DRIVERS ARE THE SIGN. ENTERED DRIVERS FILE AND INSTALLED THE SIGN AND IT IS SHOWING NO SIGN, ALSO WITH HP ASSIST THIS HARD DRIVE IS DISPLAYED AS 0 FAILURE AND DISK.

  2 TSST CORP CD/DVD TS - L633L ATA DEVICE DVD/CD-ROM: ENTERED VIEW PROPERTIES PILOTS AND THIS ONE HAS THE DRIVER OF THE VEHICLE AND A DRIVER.

  At the moment I'd hide so I does not uninstall my cd/dvd drive.

  Do I need another hard drive?

  Is this something with the Bios?

  Apple has tried to help with this driver of train that I'm not sure that this problem is still with this gear or what?  This is the site about the problem to apple and the site of heavy plant driver.

  http://www.GearSoftware.com/support/drivers.php

  http://www.GearSoftware.com/wiki/index.php?title=CD/DVD_drives_disappear_after_installing_iTunes

  http://support.Apple.com/kb/TS2308

  http://www.GearSoftware.com/wiki/index.php?title=drivers:_Windows_ - _Updating, _etc, _64_bit_versions, _removing

  Hi Mamalasting,

  I'd say Hewlett-Packard to visit support website and check if they have the latest drivers for the DVD player.

  Reference:

  http://www.HP.com/#support

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• I have a problem with the DVD drive not detected on Windows 7.

  I built a new PC (I've built a few of them).  This time is not considered my ASUS BD player with Windows 7 DVD burner.  It is not in either Device Manager just do not at all recognized.  The BIOS for the ASUS P9X79 of luxury see the SATA drive without problem.  Sometimes after restarting the BD Player looks and functions perfectly, but when the computer goes to sleep or shuts down is usually not there when it is restarted.  Please help me solve this problem :-)

  Original title: optical drive not recognized...

  Hello

  Please contact the Microsoft Community.

  You have a problem with the driver DVD being missing on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) that you get an error message or error code?

  (2) did you have performed the steps in troubleshooting?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  I wish that you are running the fixit-

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2-

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
  Back up the registry - http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I would have you look at the article-

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116#top

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• Problem with not burning DVDs

  I have a Compaq SR1750NX with XP Media Center.  I have never had any problems with the CD/DVD, play or whatever it is before burning.  Tonight, I bought the DVD - r, 16 X, 4.7 GB/GB, 120 min, brand Memorex, in ten pack.   I have inserted in my Combo DVD-Writer/CD-Writer.  I tried to send files to the disc.  He is opposed to a certain type (photo), so I deleted them.   I have no need of them, in any case.  So to test it, I tried to send a small file to word processing.  That has not burned, either.  When I looked at the control screen, the car showed that there is no content on it.   In the past, I used mainly for burning CD, but I tried to use DVD to their greater capacity.

  I never had any problems before.  This computer has been very reliable for most uses.  Buy the wrong type of DVD?  If this is not the case, what can I do to solve the problem?

  Hello

  Download and install ImgBurn on the link below and use it to burn files to your disk.  See if it works.  If it doesn't, try a different brand of DVD such as Verbatim and see if that solves the problem.

  http://www.ImgBurn.com/index.php?Act=download

  I hope this helps.

  Best wishes

  DP - K