Problem with proxies frame rate

Similar Questions

• Problems with 24 frames per second in final cut Pro7

  Capture of the source - Canon 70 d - PAL - 1080/24 VPS

  Apple Pro Res-converted and imported in FCP7

  Clip fell in a sequence and choose 'change sequence with clip parameters.

  Sequence is then 23.98 FPS (NTSC friendly) rather than 24 p

  Ask yourself if this is the reason why the audio goes slightly out of sync with separate Zoom audio recording (never had this problem in the choice of the sizes of 25 or 50 on the camera)

  In addition, not a huge problem, but PAL DVDSP project sees the video as NTSC conversion to Mpeg Compressor 3 - only option to choose 25 fps to keep the project as PAL (that I have to keep the project as PAL)

  Also I was wondering if Final Cut X includes a setting sequence for 24 fps instead of 23.98

  24 fps straight up is very rare. Only used for feature films and cameras of late superior (such as RED).  24 p video works at 23.98.  The cameras of Canon should really default 23.98 during the filming of 24 p.  I can't even see a right setting 24 fps.

  What also confuses me is "PAL 24 fps." PAL is not 24 fps... 25 fps and 50 fps PAL frame rates. Watch raw H.264 launches... and the camera open in QT and see what the pace. He he 24 fps?  Even deposit directly into FCP and see what says the pace.  Just to see what the pace... FCP can show a lot. And as said FCP is the pace of the film converted?

• Problems with mounting frames

  Hello

  I have a timeline with 20 images and one image in each of them.

  
  I added a button to move an image for every time I click (mouse up) button.

  But when I reinforced with all frame of 20 for the first time and start a new "cycle" to frame 1, it seems like I get two advances (frames) instead of a sequel. And this speeds up to three three forwards instead of one on the "third round". Can someone please help me to see the logical problem?

  This is my code:

  () btn_forward.addEventListener
  MouseEvent.MOUSE_UP,
  {function(evt:MouseEvent):void}
  
  If (currentFrame is totalFrames)
  {
  trace (currentFrame);
  gotoAndStop (1);
  
  }
  on the other
  {
  trace (currentFrame);
  gotoAndStop (currentFrame + 1);
  }
  }
  );

  When I trace currentFrame on the first 'tour', I get this result:

  First click:

  1

  Second click:

  2

  Third click:

  3

  And so on...

  And when I trace currentFrame in next "round" (second) I get this result:

  First click:

  1

  2

  Second click:

  3

  4

  Third click:

  5

  6

  And so on...

  Any ideas?

  You must add your event listener exactly once.  When you add it a 2nd time, you have two headphones etc.. :

  var listenerAdded:Boolean

  {if(!listenerAdded)}

  listenerAdded = true;

  () btn_forward.addEventListener
  MouseEvent.MOUSE_UP,
  {function(evt:MouseEvent):void}
      
  If (currentFrame is totalFrames)
  {
  trace (currentFrame);
  gotoAndStop (1);
         
  }
  on the other
  {
  trace (currentFrame);
  gotoAndStop (currentFrame + 1);
  }
  }
  );

  }

• I want to make a bluray with different frame rates, 23.976 and 25 frames per second.

  I tried this but they all get coded at the same pace, I change using Vegas and import in first Pro 6 and still have at my disposal, advice please?

  What are the formats of buray yet supported. Are you consistent?

  It does not matter what you change; what you export? H.264 or MPEG2 Blu - ray BluRay?

  You have to put the different framerates on various time limits yet, not mix.

• Problems with render (Prem 11 items)

  When I first import a clip in my project, the video quality is very good, but after I have make, he out craps, gets all grainy (the irony). How can I solve this problem?

  Sophie

  Part 1.

  Your Untitled.mp4 (turned)

  = AVCHD video compression

  Compression audio = AAC stereo

  Frame rate = 60 progressive frames per second

  File extension = .mp4

  Nominal value, it would seem that the project preset should be

  NTSC

  AVCHD

  AVCHD Lite 720 p 60

  In the first 11 elements, the program takes control over predefined setting the project given of some composite properties from the first video file dragged to the timeline. Sometimes it does, sometimes it doesn't. In no situation, it doesn't give you the project closet preset for you, but rather by default, its default value

  NTSC

  AVCHD

  Full HD 1080i30

  that does not correspond to properties of your video, including an interlaced 30 rate per second of the image instead of a 60 progressive frames per second an and including the size of the image of 1920 x 1080 instead of the size of your video 1280 x 720.  Why? It seems to be failing because it is having a problem with the frame rate. He is looking for a 59.94 to profile it and find 60 frames per second for your video.

  When boil us all this down to a few words. In this case, you must assign the project preset manually.

  First Elements ATR troubleshooting: PE11: accuracy of the project auto Preset setting (new project dialog box)

  When you do, you should be able to import your video into the project NTSC/AVCHD/AVCHD LITE 720 p 60 without the orange line on the content of the timeline despite this company of 59.94/60.

  Part 2

  When I import your Untitled.mp4 in a first elements 11 on Windows 7 64-bit project manually the value

  NTSC

  AVCHD

  AVCHD LITE 720 p 60

  the video quality seems good reading in the monitor of the area to change. And it doesn't have the ability to make this specific because the program its color line on the line of the capacity indicator tells me that I have the best possible overview of content (to get a better view). And, I found good quality reading display full screen also.

  Your Untitled.mp4 has a video bit rate (variable bitrate) of 5973 Kbps (kilobits per second in 5.973 Mbps. The size of the file is 41.0 MB).

  If you export your video Untitled.mp4

  Publish + share

  Computer

  AVCHD

  with Presets = MP4 HD720p60

  You should have a file whose properties are comparable to the source. The reading of this export of AVCHD.mp4 in the drive on your computer should be good.

  If for export file size considerations are not a problem here, you can increase the export export video bitrate settings tab button/video forward of the preset looking for a superior quality export.

  But, when all was said and done, I couldn't see not "grainy" before or after the reading of the Untitled.mp4 in the monitor area Edit. Export of this H.264.mp4 at no time looked grainy on playback in QuickTime player.

  Please review and consider. The double project preset controls, in particular the "Force selected setting on this project' checkbox in the dialog box new project when you perform the manual setting of the preset project. Please let me know what additional tests you need for your samples.

  Looking forward to your results.

  Thank you.

  RTA

• problems with quality vs. file size in export to YouTube 1080 p

  Hello

  I used to use NCH videopad as a Publisher began. He had shocking performance but gives really good quality and small size files.

  That is to say, I could export 1080 p 30 min video of good quality for YouTube in less than 2 GB file size, but Premiere Elements can

  Get anywhere near the same quality, even at 4 GB.

  So what I need is someone to tell me the parameters I need.

  Currently I export the shadowplay film recorded in 1080 60 fps 50Mbits (according to shadowplay).

  If I export to AVCH (whatever) with YouTube Widescreen HD - set it to match the source, I can't

  get a good quality. I even put the target at 20 and the other at 18 and it is still grainy quality and file sizes

  4 GB. The only way I can get the same quality I received of Videopad is with a 7 GB file into elements.

  Today I tried to export a video (30 minutes) and all day trying to find a good setting, and

  each parameter gets me grainy footage.

  If someone can you please just give me the detailed settings, I need (without the jargon) please.

  The problem is with file sizes as what he deletes my additions to my half a string because

  limits on usage of my data.

  Thank you

  NeonsStyle

  corn

  I think that you need to remove temporarily and advanced then refreshed. Then go through the following.

  The first link in your last message does not, but that a second was full of information (really great).

  If this is supposed to represent the output of VideoPad, here's the story.

  1. you have an AVCHD.mp4 file MPEG2.mpg is not. The file is 1920 x 1080 @ a progressive frame.

  2. our goal is progressive rate - variable and not constant, noted that the 3 frames rate in playback of video properties...

  minimum frame rate = 10,000 frames per second

  frame rate = 29,888 frames per second

  maximum frame rate = 30,000 images per second

  First Elements not managed well with the video recorded with a variable rather than a constant rate. Symptoms range from Premiere Elements of audio desynchronization to not being able to import the video at all. The typical remedy is to take video in the free program of brake hand to get the H.264.mp4 with constant frame rate (29.97) model. Then, you take the export of brake hand in Premiere Elements project using first elements add Media/files and folders.

  https://handbrake.fr/

  Also note that VideoPad product export with a low flow, i.e. 7759 Kbps (equivalent to 7.7 Mbps). You were trying for 36 / 50 Mbps in the export of Premiere Elements. It is an explanation of the difference in size of the files that run you in your comparisons of software.

  Since you don't seem to be involved with video MPEG2.mpg, I write what follows for information purposes... What do you do with an xml file if you used the 1080p29.97 HDTV high quality predefined with Publish + share/computer/MPEG? You should get a single file, MPEG2.mpg. If you use one of the presets whose name begins with MPEG2 (interlaced preset who is not progressive), then you will get two files, the video file and a file of information m2t.xmlses. Nothing to do with the xml file. All you want is the video file that will be MPEG2.m2t.

  Right now I'd take that video in Handbrake for 1920 x 1080p29.97, like H.264.mp4, import this file in Premiere Elements, export as a AVCHD.mp4 MP4 H.264 1920 x 1080 p 30, get a core file line with default transmission speeds and, if necessary, start to lower the bitrate to 8 Mbit / s by looking at the quality.

  Please consider.

  Thank you.

  RTA

  Add on... If you need a how tos tos for handbrake, let me know. It is quick and easy with the adjustment under video tab key.

• Posterize time VS Preseve Frame Rate when nested

  Hello everyone.

  When nesting two Compositions with different frame rates, I heard That Posteriser times, is a former effect that many people use it.  But it can cause a lot of problems.

  So it's better inside Composition advanced settings: Check preserve the frame rate when nested or in queue ?

  Thank you.

  If you need to keep the pace, I would choose just preserve the cadence. However, there are many times when you do not even need to preserve the cadence. So, if you don't actually have to preserve, not.

• problem with JInternalFrame?

  Hi I have a problem with jinternal frame.
  
  I added get to the JPAnel and this scrollpane to frame internal, but when the jinternal frame is open vertical and horizantal scrolls do not appear.
  
  
  my code is as follows:-
  
  
  Inner code of the frame: -.

       @Override
       public void menuSelected(MenuEvent arg0) {          
            JInternalFrame addShopIf=new JInternalFrame("Add Shop");
            Container ctr=addShopIf.getContentPane();
            ctr.setLayout(new BorderLayout());
            MainPanel mainPanel=new MainPanel();
            JScrollPane scroll=new JScrollPane(mainPanel);
            ctr.add(scroll,BorderLayout.CENTER);
            desktop.add(addShopIf,1);          
            addShopIf.setClosable(true);
            addShopIf.setMaximizable(true);
            addShopIf.setResizable(true);
            addShopIf.setIconifiable(true); 
            try { 
                 addShopIf.setSelected(true); 
             } catch (java.beans.PropertyVetoException e2) { 
               } 
            addShopIf.setSize(400, 400);
            addShopIf.setVisible(true);
            
       }

  Published by: Myriam March 19, 2012 11:41
  
  Published by: Myriam March 19, 2012 11:45

  By default, the scroll bars are visible only when necessary, that is, the content of the provided element is larger than the size of itself. Have you tried to resize the element to display the scroll bars appear?

• Import problems with frame rates for formats HDV 24 p - vs - 29.97 FPS

  Sorry if this has been discussed before but I couldn't find the answer.

  I use a camera Sony HDR-FX1000 with an external recorder card compact flash (Sony also) and I chose 1080i 24 p in the camera to shoot in.  When I pull my card compact .m2t files flash in my first Adobe Elements 3.0 data of the file shows that the frame rate is 29.97 FPS.

  Why Prime Elements 3.0 display 29.97 FPS when I chose 24 p in the camcorder?

  What should spec 24 p look like in elements of Prime Minister? As 24.0 fps?

  Interesting, so even though I'm moving to PrPRO I still have a problem with editing in 24 p?

  Lol PrPro offers what is called a Preset Desktop, which allows the user to set almost all the parameters of the sequence/project, match the pictures. PrE has a limited set of Presets for the most popular attributes only, and is not yet a Desktop Preset with adjustable attributes.

  This ARTICLE could be useful. Jim Simon and Dan Isaacs discuss Film Look, 24 p is often part.

  Good luck

  Hunt

• Posterize time changing frame rate problem

  Hey guys, I'm looking for this problem with my code. I'm trying to set the value of a posterize time effect frame rate. I have problems with it being not defined. I did the same process with other effects, and it worked fine.

  How to set up the effect: (things like preComp have already been defined)

  //global
  var rateProperty;
  
  
  //Setup Function
  function setup(){
      rateProperty = preComp.Effects.addProperty("ADBE Posterize Time")("Frame Rate");
  }
  //When I want to change the value
  
  
  function runGo(){
      switch(frameRateDropDown.selection.index){
          var rateDocuments = rateProperty.value;
              case 0:
              rateDocuments = 5;
              rateProperty.setValue(rateDocuments);
              break;
              case 1:
              rateDocuments = 10;
              rateProperty.setValue(rateDocuments);
              break;
              case 2:
              rateDocuments = 15;
              rateProperty.setValue(rateDocuments);
              break;
              case 3:
              rateDocuments = 20;
              rateProperty.setValue(rateDocuments);
              break;
              case 4:
              rateDocuments = 24;
              rateProperty.setValue(rateDocuments);
              break;
              case 5:
              rateDocuments = 25;
              rateProperty.setValue(rateDocuments);
              break;
              case 6:
              rateDocuments = 30;
              rateProperty.setValue(rateDocuments);
              break;
              case 7:
              rateDocuments = 40;
              rateProperty.setValue(rateDocuments);
              break;
              case 8:
              rateDocuments = 48;
              rateProperty.setValue(rateDocuments);
              break;
              case 9:
              rateDocuments = 50;
              rateProperty.setValue(rateDocuments);
              break;
              case 10:
              rateDocuments = 60;
              rateProperty.setValue(rateDocuments);
              break;
          
          }   
  }
  

  Is it possible between getting the property and set its value, you're adding / removing effects that invalidate your reference?

  Dan

• Problem with the display of a video frame in Windows Media Player 11 on Vista

  Hello

  I am having some problems with the Windows Media Player 11 on Vista. On my XP machine, when I discovered a video frame by frame, it works perfectly back and forth. However when I try to play the same video on my Vista machine, the button to the front of the image works perfectly fine but the previous image button takes video from 5 to 10 frames. Since I use my machine Vista more and need this feature often enough, it gets boring very quickly. It is a drive problem (since the same player works great under XP with the same video) and can be solved with a patch or some sort?

  Thank you

  Hello Helloaamir,

  Thank you for posting.  I understand the problem you are having, but I do not understand why in the need for these features.  Depending on what you're trying to do, may be able to use Movie Maker instead of it you also has characteristics of the image by image.  If you could include that you are using this feature, because I can give you a good alternative or possible difficulty of deliverance.

  Looking forward to help you any further. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I have a problem with corruption.  How can I change the timeline on an existing project.  Each image is moved about 2.5 min.;  My preferences are for 180 frames.  It does not seem to consider one after the fact.  Is it possible to copy the entire thing on

  I am new to use the forums.  How to start a discussion?  The ICO next which is grayed out.

  I have a problem with corruption.  How can I change the timeline on an existing project.  Each image is moved about 2.5 min.;  My preferences are for 180 frames.  It does not seem to consider one after the fact.  Is it possible to copy the whole thing and put it in a new, m not corrupted project?

  Hello and welcome.

  I feel for you after reading your story, however, it that are supposed to do? It is a forum for Dreamweaver and to my knowledge, Dreamweaver has no functionality called the chronology.

  Could you please explain the problem so that we can understand?

• FM7.2: Problems with frame anchored in the rotated table cell

  Hello O Experts,

  I am facing a nasty problem with FrameMaker 7.2 for Windows with frames embedded in rotated table cells. I was wondering if any of you have seen this problem and know how to solve.

  The problem is reproduced as follows:

  1 create a table.

  2. Add a small frame anchored "the point insertion" inside one of the cells.

  3. Add a line of text to the anchored frame.

  4 turn the cell by 90 degrees clockwise or counterclockwise.

  Up to step 3, the anchored frame and the line of text behave as expected. Can I choose both the frame and the text line, move and resize. In all cases, they are displayed correctly.

  After step 4, the following occurs:

  • The content of the anchored image appear or is badly distorted.
  • Is no longer, I can select or resize the anchored frame (if I try, FM acts irregularly and wildly moves the outline around the page).
  • I can choose is no longer the line of text in the frame.

  I enclose a file FM (created using integrated model "portrait" of FM) sample that illustrates the problem.

  If someone knows this problem and I hope a solution, I would greatly appreciate it if you'd share. Thank you very much!

  Michael,

  If you turn just the anchored frame itself and not the cell (content) then everything behaves. If you have lots of content for the anchored frame, then place a block of text in the anchored frame, use a suitable paratag in text and only turn the framework anchored (all content will follow along then).

• Problems with line spacing and text in Indesign 6 rate

  Hello everyone. I'm a graphic designer working with new magazine layout in Indesign. I used Quark for years and recently fell on this problem...

  In a paragraph, we usually use a soft return back some words to the next line. However, there are opportunities, I notice that in doing so the lines above where I am bumping the word ebb and Exchange. I've never had a problem with this before and it is a serious problem for us. Is it a setting I have on that I'm not aware? What can I do to avoid what is happening?

  Thank you for any input or advice.

  It is one of the main differences between Quark and ID.

  ID has a "paragraph composer" for will as a simple line like Quark composer, and it is enabled by default. When you use the paragraph composer, text is constantly analyzed and spacing adjusted for better form and appearance (according to the spacing algorithm and parameters of your justification) for the whole paragraph. If force you a line break, ID can adjust all the lines above as well as the following lines.

  If it is a 'serious problem' you shoud probably witch to the composer line simple. You will find a drop down for it in the dialog box of the definitin of paragraph under the parameters of the Justification style, or you can change individual paragraph as a local override from the steering wheel to control panel menu.

  Most of us who've been ID user for some time find the paragraph composer include the forces of the ID, and feel that it generates more nice looking text than a single-line composer.

• Problem with 1424 and dalsa ca d1 256bis

  Hello friends.

  IM using a PCI card 1424 with a camera 256bis dalsa CA D1 and Im facing a problem.

  When I try to do a snap with MAX the picture I get is a white square.

  But if I click several times in the snap of MAX the image slowly appears and in the 10th aprox of click, it shows the picture correctly.

  I guess that's something related to the saturation of the CCD in the camera. I tried to open/close the diaphragm of the objective, the point of the camera for objects bright/dark and I can't get a clear picture when I click on the spring button several times.

  Also, I would like to know how I can control the shutter speed of the camera? This camera is digital and have no switches or jumpers.

  Please can someone tell me what is happening?

  Concerning

  Frank

  Hi frank,.

  I think that the attribute you are looking for is the frame rate. The shutter more often define the speed is the acquisition of the camera. This setting to the MAX, as you should give as many frames the camera is able to acquire. The attributes you listed seem to be all the attributes in the file of the camera. Your camera may or may not have more, but for some reason any manual dose list is not them.