Problems with playback of .mpg files & other video files

Similar Questions

• Does anyone have problems with playback when editing v9.2?

  I have problems with playback when you change a small project (4 min).  I had a few problems on previous projects, but this one is particularly bad.   When I read my edition, the (unique) audio plays normally but video lags or freezes completely.  I can get around it temporarily by parts of the sequence rendering, but that's a lot of time and as soon as I make a change, the problem reappears.  I updated drivers etc. After reading the other reviews but it now becomes impractical, and I'm seriously considering whether I should continue with first or look for something more reliable

  PLUG

  Samsung Chronos i7 with 8 GB of RAM and a lot of spare

  WIndows 10 build 10586.218

  First Pro 9.2 zigzag

  Pilot of 640 M from NVIDIA Ge Force GT 353.90

  

  The only area I think needs expansion is the disk configuration.  Here's what I recommend as a starting point.

  C: Windows and programs

  D: project files, audio, and still images

  E: cache and Scratch

  F: media camera only

  G: export

  In addition, a form of backup solution in place.

  The above will give you excellent disk performance, spreading things to prevent the creation of a bottleneck.  It is based on the use of the HARD drive, simply because they always have the best bang for the buck.  But if you have the scratch for some good sized SSD, the situation changes a bit.  You could probably combine D and E on a single SSD and F and G on a third party, without slowing things down significantly.

• Is a person having problems with playback with blocking sequences?

  Is anyone having problems with playback after creating a multicam sequence? This occurred after the recent upgrade.

  Basically, I merged my video files and audio files into one (fine and dandy), but when I tried to look into the window of the monitor or timeline, he would not play! What is the problem? I've done several times before...

  Let me know if anyone knows this.

  Thank you!

  I talked to Tech Support yesterday and they told me to enter all your audio clips in the sequence Ctrl + (secondary click) click on them and press Render and replace. Then, you close app and load project again you. It has worked for me since I went deep into audio original for all sequences of blocking and rendered and all replaced. Apparently, there is a problem in this version on the audio clips in sequences making making them generate this error, but this type of tech support does not explain to me exactly what was going on. Apparently the Render and replace fuction restarts a little audio clip and allows to you to sequence work normally again. Make sure that you apply to the original audio clips of each cam, no to your chopped pieces place in the timeline you edit.

  Let me know if it worked.

  Good luck.

• Problem with playback device?

  Video call in progress version 7.2.59.103 3 days ago made in New Zealand was in line for 40mins no problem what ever. as soon as I ended up call message problem with playback device. and as soon as I use either call or video call immediately, the page returns to the home page and does not appeal. checked devices audio all working correctly, no update of windows for the last 3 weeks. using Skype on my asus laptop 5 years on widows 7

  Hello, do not know what I did but trhe message has diasppeared, and the test call also works OK now.

• Help: problem with playback device

  Hello

  My dell latitude e7240

  and my headset logitech g150

  does not connect it says: problem with playback device

  It calls for 1 second then ends

  and when my friends try to call the said

  contact can only receive instant messages

  Help, please

  and fast

  Thank you very much

  I did a diagnostic test and other results are here

  https://www.dropbox.com/s/ipvyg52xhfwjrly/Dxdiag.txt?DL=0

  and Skype is the last

  Thank you

  answer soon

  Morgan

  Topic/title edited for clarity.

  Still no trace of your helmet and Avnex Virtual Audio Device is always installed.

  The specified Audio Capture Source only is Avnex Virtual Audio Device

  audio Capture Sources :

  Microphone (Avnex Virtual Audio Device), 0 x 00200000, 0, 0, qcap.dll, 6.06.9600.16384

  Open the Windows Device Manager. Are there looking for this virtual audio capture device, then uninstall it.

• "the problem with playback device" with Skype.

  receive 'problem with playback device' with Skype.  When I go to the Control Panel on my pc dell under sounds, etc., there is no option of reading before it takes.  have spent hours on Skype and my pc. Help!

  Hi BeverlyBowers,

  Facing any problem with the sound on the computer other than on Skype?

  Problem with playback device means that Skype cannot find a speaker or a headset that is properly configured on your machine in order to make a call.

  Method 1:
  I suggest you to run the Fixit and check if it helps.

  Automatically diagnose and fix the audio problems and Skype webcam
  http://support.Microsoft.com/mats/Skype/

  Method 2:
  If the problem persists, I suggest that you make sure that speaker or headphones are selected by default.

  a. go to Start and click on Control Panel.
  b. click on her, then a new window will open.
  (c) in the new window click on the tab "recording" and right click in the window and click Show disabled devices.
  d. now check if the speaker or headset is listed here and right click above and choose Activate.
  e. highlight the speaker or headphones and click on 'Set as default'.

  Method 3:
  If the problem persists, I suggest you install the latest audio drivers on the manufacturer's Web site and check if it helps.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Skype usage error: problem with playback device

  Original title: Skype.

  I'm calling by Skype and it is written that I have a problem with "currency of reading".

  What should I do?

  Hello

  ·         Audio devices work otherwise?

  Problem with playback device means that Skype cannot find a speaker or a headset that is properly configured on your machine in order to make a call.

  Step 1: Launch the audio troubleshooter. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Also refer to the support of Skype.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• a problem with one of the files in the TestStand\AdapterSupport\LabVIEW directory

  When looking at the module a LabVIEW VI called for TestStand, I get the following message:

  A problem with one of the files in the TestStand\AdapterSupport\LabVIEW directory.  Please reinstall or repair.

  I made the mistake of cleaning C: in my computer.  Clean the C:\National Instruments downloads

  Why would someone put bits of applications or modules, etc. in such a directory?

  I'm not too crazy about restoring 11FR in this folder.  It's just crazy!

  If anyone has encountered this before?  No "easy"? outside re - install TS...

  Side note: I do not touch anything in the \Program files. National Instruments\TestStand\AdapterSupport\LabVIEW

  What version of LabVIEW and TestStand do you use?

  In 2012, TestStand, this directory is mapped to:

  C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 2012\AdapterSupport\LabVIEW

  Have you tried mass compiling the screws in this folder?

  I had to create a new 'TestStand - default values XX.llb"file, where XX is the last version of LabVIEW you use, but I have not seen this message before.

  Good luck

  PH

• Problem with the transfer of files from the computer Windows XP to Windows 7 using Windows Easy Transfer.

  Original title: Put WET on the old computer

  When I try to use WET to transfer from old Win XP Win 7 again, I need trasfer WET to the old computer.  So I choose this option and move on to the part where it says "Select the USB flash drive where you want to save WET".  Well, in the window is the word "computer" I can't click on it, nor is the OK button light up.  What's wrong?

  Hello

  Thanks for posting in Microsoft Community!

  It seems that you have a problem with the transfer of files from the computer Windows XP to Windows 7 using Windows Easy Transfer.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  I suggest you try the procedure described in the link and check if it helps.

  Transferring files and settings: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/transferring-files-and-settings-frequently-asked-questions

  For more information, please see the links.

  Transfer files and settings from another computer
  http://Windows.Microsoft.com/en-in/Windows7/transfer-files-and-settings-from-another-computer

  Windows Easy transfer

  http://Windows.Microsoft.com/en-in/Windows7/transfer-files-and-settings-from-another-computer

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Problems with the published html file

  Hi, I am a beginner using Adobe animate. I managed to do design an interactive infographic to incorporate into a Web site. But I have a problem with the published html file. The html file is generated, but when I click it, only a blank page opens on my internet browser. As far as I understand it, computer graphics itself should open in the browser. Can someone please advise what I could do wrong?

  Thanks a lot for your help!

  Perhaps a blank screen when the animation is published.

• Strange problem with export to jpg files

  I'm having a strange problem with exporting my vector files to jpg.  When I export the file as a .jpg file, then open it some text or shapes (such as rectangles or squares) have disappeared.  When I go back and open the file .ai the stuff is there, but he just went on the jpg.  If I open the .ai file in Photoshop it's gone too.  I have to save the file in pdf format, then open the PDF in Photoshop and export in a file .jpg away.  It's very strange.  If I go into the Illustrator file and re - type the text disapers, it usually fixes the problem.  I'm not an expert with Illustrator, then I can do something wrong, if anyone can help please let me know, thanks! (I have CS3)

  Things that are disppearing are defined for a recovery? Look in Control Panel attributes with objects selected and see if all the overprints are defined.

• Satellite P200 1EE problems with playback HD video and USB ports

  I bought the laptop Satellite P200-1EE dixons for and I'm happy with it in many ways, but the main reason I bought the 1EE P200 was because of its potential to play and edit the video high defintion.

  I can't seem to play or watch video clips high definition without them being clumsy and with a frequency of images at 3 frames per second, and not the 30 frames per second, he must turn.

  The clips I'm playing are some MOV files record on my camera at 1280 by 720 resolution at 30 frames per second and the two Quictkime player and Realplayer they simply are not quite smooth. Given that the laptop has a DVD player high definition and a high-end graphics card ATI HD 2600 ispecifically intentional for high defintion watch a DVD high defintion to 2040 by 1080 I do not understand why he should fight with playback relatively low resolution video files.

  I would edit 720 video high definition and the speed of the processor, the speed of the bus, ram and graphics card should be enough for this high defintion video simple editing, so if he can not even play video high defintion, what chance does he have to edit video high defintion?

  After only 2 days of working completely fine Vista Vista completely crushed and the computer refused to restart. I had to use the recovery disk and completely wipe the hard drive. not a good introduction to vista which, apart from that, it was very slippery. After you have installed Office 2003 it works completely fine on Vista Home premium

  Does anyone have suggestions or solutions?

  Hi Daniel

  To be honest you message confuses me.
  The recorded movies (.mov files) are not format true high definition as in movies on HD DVD or Blue ray!

  I think you need to convert these files first in a format mpeg mov or avi format and then you can try to play with ordinary players like WMP, Real player, etc.

  Here are some useful tools;

  Converts mov to mpeg
  http://www.radgametools.com/binkhcon.htm

  Convert mov to avi
  http://www.JakeLudington.com/ask_jake/20051003_convert_mov_to_avi.html

  With regard to the question of the USB.
  Try to remove the USB port on the Device Manager and restart the laptop. After restarting again the USB ports should be recognized again and the USB driver should be updated.
  In most cases, this enables the USB flash drive.

• Problem with progressively downloaded FLV files

  Hello world
  
  I will be much obliged if anyone can identify the problem here.
  
  I created a Web site in flash that contains about among other things, 12-13 FLV files in different sections and about 4 audio files. A section does not appear more than one FLV. To view FLV files, I used the function "Import Video" and chose the "progressive download from a Web server" option because the site is hosted on a Web server. Once the import is complete, the video playback component appears on the scene. For audio files, I used the loadSound() function.
  
  Now the problem is that the videos work very well on some computers, but some other videos, and his game and some are not. I was wondering if the following may be the cause of the DIF:
  
  (a) the speed of internet connection
  
  
  (b) in addition, I have different sections of the Web site on different images on stage (yes I know not the ideal strategy), so when an article with video is met, the program will simply to this image on the stage and the video starts to play that it self. Similarly, when the user switches to a different section, and therefore the program moves to a different frame on scene, I guess the video stops downloading by itself that the player is no more in this context. Is the right way to do it or what I need to add code asking explicitly the video stop before stopping the framework?
  
  
  (c) Finally, I was wondering if the videos do not appear because / cache the user of the buffer is full and we need clear this each time before a video is displayed.
  
  The site is ready to be deployed and its so frustrating that these glitches occurred at the last minute. I'll be grateful for any help/idea.
  
  Thank you very much
  
  Essaeyu

  I found the solution. The problem was due to the wrong MIME type in IIS for FLV server. So I changed the MIME of Application/octet-stream video/x-flv type and the website now works fine.

• Camcorder Vixia HFm500, problems with playback.

  I have a camcorder Vixia HF M500.  I use a professional PNY 16 GB SDHC class 10 card.  When I try to access the AVCHD video I have on the card, via the play button, I get a yellow [?] instead of a thumbnail of the video on the map.  I went through the manual twice now and you can find NO reference to the yellow [?], can help any one, please?

  Thank you

  Hi sisko67!

  Thanks for the post!

  Yellow indicates '?' corrupt video files are on the map.

  1. Do you have recently formatted/initialized map?
  2. You have this problem with other cards?

  If it is a time sensitive matter, additional support options are available to contact us.

• Basic system faced with Standard Def MPG files

  We have built two news editors about 6 months ago and needed to build computers at $1200.  They replaced two former Avid Newscutter XP systems since 2004...

  Because we were shooting DVCAM DSR - 250 camera or DV.mov/.avi files on nNovia QC bridges on the camera, the files were content essential to 25Mbps DV in SD.

  Based on Adobe for first CS5 system requirements, I didn't feel that I needed to build these machines high-end at the time.

  They are as follows:

  Motherboard MSI 77 T - C45 http://www.newegg.com/Product/Product.aspx?Item=N82E16813130270

  AMD Phenom II X 2 555 Black Edition 3.2 GHz http://www.newegg.com/Product/Product.aspx?Item=N82E16819103846

  Seagate Barracuda 80 GB drive C: Boot, file of the Page http://www.newegg.com/Product/Product.aspx?Item=N82E16822148231

  Reused Samsug 7200 RPM SATA 1 TB system drive Avid Scratch.  E:\  Projects, raw, media cache files files

  Corsair XMS2 4 GB (2x2gb) Dual Channel http://www.newegg.com/Product/Product.aspx?Item=N82E16820145184

  PNY nVidia Quadro FX 380 256-bit - 128 MB GDDR3 http://www.newegg.com/Product/Product.aspx?Item=N82E16814133274

  Corsair 400W Power supply http://www.newegg.com/Product/Product.aspx?Item=N82E16817139008

  Returning to him now and after reading a lot of posts, these systems are on the low end.  Guess that's how Adobe gets more people to buy software, make it look like it will work on you, after that shell out you money on the program, you realize that you need to upgrade hardware too...

  Systems worked very well for the SD images, that we needed them.  We're not HD any time soon as our studio together, routers, switcher, CG, broadcast system, the camera studio and virtually all the rest would need to update. So I tried the editors that were easier to use and treat what we were working with and that's what I got.  Featured in 3-5 years when HD comes to us, it will be time for all new system on CS7 with 30 hearts, 1 TB of memory and other... (From right)...

  So new twist to the issue.  We had a lot of problems with the camera dying the last few months.  It became difficult to follow the work of DSR-250 s and even if I can buy them for $1000-$1500 used off eBay and they are in much better shape than ours, they were big, bulky and our reporters 'one man band' it a lot and two young women are just shy of 5 feet.  You should see a small journalist little lug a camera to mount huge shoulder upward on the tripod and run it when he is bigger than them... Really funny!

  Then I pushed for the new camera and found that the new Sony HXR-NX5U satisfied all our needs because it is a camera style Z1/Z5 (smaller size), but has 'NO TAPE'... Cards SD and a 4 GB class 2 gives 58 min shoots each SD

  It will draw HD as AVCHD 24Mbps files and SD Mpeg-2 and 9 Mbit/s with AC3 audio.  I demo had a Sony camera and did a lot of testing with it, I played a few clips on CS5 systems and everything seemed ok.  They required a quick render and I think it has to do with the Mpeg-2 compression.  It is about 1/4-1/2 time rendered so a 5 minute clip will take about 1 to 2.5 minutes to restore the.  Reading is ok even if not rendered but the video looks blurry on the CRT monitor looping out of our DVCAM DSR Firewire-11 bridge.  Not a big deal, they can change and go to the end before discharging it on tape.

  Problem who came today (we just started to use the new camera this week), when I went to diagnose the system crash, I found a package of new singles on the timeline.  Maybe 40 small clips, edited into a package, with simple changes.  He is already gone, but I noticed that the fan on the system has been running fast that only happens if the CPU is working hard.  (Before 120mm case fan is PWM control CPU fan header, CPU fan is on Northbridge fan connector non - PWM controlled)  If the (stock) CPU fan runs at full speed, but I used the temp of MB of surveillance to control the front fan, so I could have a system at rest when he is not working hard.

  Led me to open the Task Manager.  I found that the CPU running along 94 to 98% for the two hearts.  RAM is ok as first used about 1.8 GB to 4 GB in the system.  I checked the other system, and it did the same thing.

  What is strange, is first is just sitting there, with an open timeline, mpeg-2 clips on me and it does nothing, it remains at 92% constantly.  I have even shut down the project so I'm out on the 'new project' screen 'Open Project' and no change.  If I hit the exit, then the CPU down immediately fell to 7% and is fine.  First reverse open in a project and the CPU goes up immediately.  During a Render chronology, it is 100%.

  We are able to change and they seem to work, but it is at the origin of the system hot and running the CPU at max almost all the time. I added two 80mm fans more to the back to help get more hot air out.

  Is my way to smart to slow down to mpeg?  Is there a setting I need to change to optimize editing mpeg-2?  I guess that's the work to decode the video on the fly, something of so much CPU for does not require the DV video.  I do not use the GPU acceleration as I don't have a card that supports even with the Nick I know.  And VAC. GPU does not work for firewire DV output.

  I am considering the following:

  1 buy more large aftermarket CPU cooler and overclock my chip as many say this 'Black Edition' with an unlocked multiplier is a breeze to overclock to 4 Ghz. (but still only 2 hearts) high-end

  2 buy a processor core replacement 4 or 6 to replace (also with more stock Cooler of above)

  The only problem is having to spend so much money on additional hardware.

  I'm also going to optimize Windows 7 on these editors as I think Areo is running and other no essential things.

  The big question is why is it maxing when doing NOTHING?  He's just trying to build this still image on the screen because it's an image between the I frames? (i.e. not a genuine framework of video but has been created by decoding the info from IPPBPPIPPBPPI, etc.).

  Any idea / help would be great.  Anyone else using this camera and SD files?  I don't think it would be a problem that I had read a post that people were editing stuff on CS3 a few years back.  Impossible to believe that this would produce a newer system grief so...

  Mark

  The results have been posted.

  The figures are disc, MPEG, H.264, and render the results respectively.