Problems with ports ethernet E4200

Similar Questions

• Having problems with ports USB 3.0 in computer option H8 - 1010 T

  Well, I bought the option USB 3.0 ports on top of the computer on the computer mentioned in the Thread object and I have problems with them.

  I tried plugging USB 2.0 devices in these two ports to "test" to see if they work, yet I am not able to get them to work with USB 2.0 devices. USB 2.0 is not compatible with USB 3.0 ports? Or I'm doing something other 'evil' here?

  Unfortunately, I do not have a USB 3.0 device to plug USB 3.0 ports to make sure that it is certainly a problem with ports still.

  The device in question I've tried in the USB 3.0 ports is a Microsoft Wireless Mouse 6000 wireless receiver. If the ports are not connected correctly, I would have assumed that the wireless receiver would have "blown" when I plugged it in, but it still works very well.

  USB 2.0 devices are not compatible with USB 3.0 ports? I know that USB 3.0 devices are backward compatible with USB 2.0 ports (I have a friend who is in this situation), but I also thought that the opposite was supposed to be true as well. Am I wrong?

  @William

  Check out this thread, seems to be the same problem you are having.

  http://h30434.www3.HP.com/T5/desktop-hardware/USB-3-0-ports-on-Pavilion-HP8-1070t-not-working/m-p/792857/highlight/true#M35248

• New laptop / problem with Ports

  Hello, I bought a hp dv6 Clubhouse yesterday and I noticed problems with the positioning of the ports.

  First of all, when I inserted a USB stick in the usb port it seemed very tight and more difficult then it should have been. Second, the ethernet cord is stuck. I looked in the ports and compared them with my mother hp entertainment pc clubhouse and they seem to be at a strange angle.

  I know that's not good.

  However, we have a 3/4 year warranty on it.

  is this a regular event? A manufacturing defect? will they be able to replace it?

  If you face in fact a usability problem with the design of ethernet and USB ports, I would simply say to return it and get it exchanged. like this a brand new laptop.

  Also back up all the files is installed on this laptop, perform a system restore (restore to factory settings) on the laptop before returning it to the place where you bought it.

• Satellite Pro L10 problem with Ports COM/Hyperterminal & Bluetooth

  Hello
  I have the following problems with the above machine:

  (1) I have attached an external series COM port to the machine. However, I can not connect to the COM Port using Hyperterminal.
  (2) I installed a Bluetooth USB adapter, but I can't view the protocol configuration.

  Each of the above works perfectly with another laptop that doesn't have a Bluetooth or even a network card.

  Everyone has experienced similar problems. I use WinXP SP2.

  Thank you

  MC

  Hello

  1, in which is the external COM port connected? Is detected in a straight path in Device Manager? What is the error msg to Hyperterminal?
  When connected via PCMCIA, try to change the settings for PCMCIA slot in the BIOS!

  2, try to reinstall the Toshiba Bluetooth stack! There may be some problems. The MS Bluetooth stack does not work properly with the Toshiba devices and one of the earlier Toshiba Bluetooth stack is not signed by Windows XP Service Pack 2!

  Hans Bye

• Toshiba Tecra A3 - problem with Port Replikator III

  Hello

  I have a problem with a Toshiba Tecra A3 combined with a Port Replikator III. Both work very well together until you disconnect the laptop computer. After you start the Toshiba Tecra A3 without the Docking Station, everything is always ok. But when I anchor again and start it, Win XP is not able to display the logon session on the external monitor screen. All configurations, I did (for example only display on external monitor) with the mobile extension module are only available after login. But when I don't see the logon screen, I can't do that; (o). so, does anyone have a solution how can I use the external screen after the boot (without using the FN + F5) key.

  any help is much appreciated
  Thank you
  Mario

  Hello

  As far as I know logon window can be displayed on the primary monitor only. Computers laptop LCD is set to a primary, and it cannot be changed. As you can see this option is grayed out in display properties.

  Good bye

• Qosmio G10: problem with Port Monitor

  Hi all

  I have a Qosmio (G10), but I have a problem with the functions of 'Port Monitor-in '. However, I have connected my computer cassette player output ports "port monitor" with the proper cables and jack and get good sound but get no video.

  where I go wrong?

  Thanks in advance.

  Hello
  you need to go to "start / all programs/toshiba/utilities/photo Enhancement utility ' and then click 'monitor input parameters'"
  choose s-video and monitor-in.

  Good bye

• Problems with the Ethernet controller and PCI Satellite L30-10 X device driver

  HelloW!

  Sorry for my bad English, I'm from the Russia.
  A few days ago, I bought Satellite L30 - 10 X with W Vista on board. In my opinion, that this OS does ' t very good on this computer, so I install W XP.

  I have some problems with drivers. At first, I don't know which model I have: PSL30 or PSL33? I have download all the drivers for the two models. But after installation, computer doen't find the drivers for the Ethernet controller and PCI device...

  Hello

  Satellite L30-10 X belongs to the series of PSL33E. This number located on the label on the bottom of the device!

  You must choose this number in the form of driver download for XP compatible drivers.
  I put t know why you are not able to install the LAN driver. I have the same laptop with Vista and I've install the XP and all the drivers will work perfectly.

  I assume that you have installed the drivers in the wrong order. Please take look in the Toshiba installation instructions txt file. In this order, install the driver! This is important.

  I think that you should install XP again to ensure that the registry clean, then download and install the XP drivers compatible as mentioned in the installation instructions file.

  Good luck

• Problem with Port Forwarding (When PPTP is upward) in the WRT-160N

  Hello world!

  I'm looking for more help with Port Forwarding in my new Linksys router. I bought the daysago afew router and was pretty surprised when I discovered that there is no DD - WRT firmware is installed in it (the router was 100% NEW when I bought it). I downloaded latest firmware original and flashed Linksys file successfully.

  But I still have the problem (even that I was on DD - WRT firmware too) with the port forwarding for my DC ++ and Vuze (app from torrents): I wrote port forward for ports 49151 (for Vuze) and 4000 (for DC ++) to pass on to my desktop computer (IP 192.168.1.201) - I saw a post on this forum, that there could be a problem If you transfer to an IP address, which is within the local area of DHCP, so I forwarded to IP.201 (my local DHCPzone is 192.168.1.100-. 149) But does not forwardind (())

  What's wrong?

  My configuration:

  Router IP: 192.168.1.1

  PPTP (I my ISP)

  IP address: 192.168.226.127

  Default gateway: 192.168.226.2

  DNS 1: 192.168.1.1

  2 & 3 DNS: 0.0.0.0

  The IP address of the PPTP server: 192.168.226.2

  User name: *.

  Password: *.

  _____________________

  Simple Port Forwarding:

  Name of the external port application port internal protocol for IP address Enabled

  Vuze 49151 49151 times checked 192.168.1.201

  DC 4000 4000 checked two 192.168.1.201

  As you mentioned in your post that your ISP has provided you with a PPTP connection with an IP address: 192.x.x.x. The IP address that is provided by your ISP is in a private beach, and if you try to transfer all the ports on your router, it will not work, as long as your ISP modem is blocking this port. If you need get a public IP address from your ISP.

  As you get Private IP of your ISP, if this connection is called as NAT behind NAT and your Modem behaves like a router.

  So now you have 2 options, get the public IP address from your ISP or change the type of connection.

• HP 655 update to windows 8.1 problem with Realtek ethernet driver

  Hello

  I do an update for Windows 8.1 and now I have a problem with the Realtek ethernet driver, which does not. If I look in Device Manager I see an error for Realtek ethernet driver:

  "Your computer's system firmware includes enough information to properly configure and use this device.  To use this device, contact the manufacturer to obtain a firmware or an update of the BIOS of your computer. (Code 35) »

  I have the latest version of the bios: F.26

  I try to install the driver from the HP site: 8.3.730.2012 HP driver

  also I try with the Microsoft driver: 8.1.510.2013

  Ethernet works fine in any other OS.

  Thank you for you time and I hope that solutions to this problem.

  @all

  Install the new Bios for HP 655 compatible sound

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Realtek-Ethernet-driver-error-code-35-Compaq-CQ58-Windows-8/m-p/3208099#M53864

  655 HP

  Updated HP Notebook System BIOS (AMD processors)

  Version:

• Problem with Port on the DV7-3079wm of charge

  Hello world.  I searched the forum for this question and other places and I think I probably know what is the problem, but I wanted to make sure that before I go ahead with trying to fix and get some advice on my specific problem.

  I have a HP Pavilion DV7-3079wm running Windows 7 64 bit.  I have problems with the laptop to load.  I've already replaced the battery to eliminate this problem, but I need one anyway, because one was not maintain a load more.

  So the problem is when I plug my power adapter most of the time that he does not even recognize that I have it plugged.  No light load on the side or the front.  So if I slowly wiggle out or try to angle in one sense or the other, eventually he'll catch a connection and then 1 of 2 things going on.  Either she viewed the laptop too long that I do not move the charger of whatever the position in GOLD, it pops up a message saying "Smart AC output adapter is too weak for this computer." and then proceeds to the load of the laptop or it just says: "plugged in, do not load.

  I do not know if my problem is the AC adapter or if the port inside the laptop is messed up, which from what I've read on other forums requires either a new motherboard or tear down my laptop and re - solder a new fee on the motherboard port.

  I can't wait to buy a new adapter if it isn't the problem.  Also another problem, I am very happy with my laptop and really intended to max on memory and improve for one SSD but I don't want to sink money into it until I get this problem resolved.  Any help would be appreciated.

  Thank you

  No rust spots on the inside or outside of my plug adaptors CA.  I finally just went and got a new adapter and when comparing it to mine its all brilliant inside the end of the plug where mine is dull looking.  Which may mean it was just salty and was not getting a good connection.  A new Bill without problem, and immediately, although she Wiggles, if fortunately is not the port inside the laptop.  I'll try to clean my AC adapter / CC and see if it makes too much work again.  Thanks for everyone's help and info that it was appreciated and he has helped guide me in the right direction.  Also, if the port never turn off, now I know where to get a replacement.

  Up next... go to the SSD & maxing out the memory.  I can't wait!

  Thank you!!!

• Problem with port 20 on ProCurve 2910al - 48G - POE

  I recently sent 5 x ProCurve 2910al - 48G - POE switches connected to 2 x ProCurve 5412zl.  I have a problem that port 20 does not seem to work on all 5 predisposees.  What is a config problem?

  We had the same problem

  We have upgraded to the latest version of 14.38 and seems resolved.

  probably wasn't available when you had the problem

• Problem with the Ethernet driver on the computer.

  My computer running Windows 7. I have trouble with my USB ports, so I wired my computer and use my Ethernet port. I had problems to have to set my modem every time that I got online and now I simply cant. When I diagnose the problem, he says I have to install the driver. I have not uninstalled anything. My computer does not recognize the modem. I am able to connect wireless currently but I really need to use the Ethernet port and move my computer on my living room floor :) I'm trying to figure out how to download or reinstall the driver?

  Try to update the drivers for hardware pc/software, so intel based pc, go to

  intel.com/support/software/drivers.Either run the utility intel who sweeps

  any intel based pc for all updates, or locate manually. The chipset «»

  utility installation' would be 1. It controls sound/USB/eithernet, and

  other hardware on the pc... Intel should also have the 'networking '.

  drivers, all being that its mainly based on intel. Otherwise, go to the pc mfg

  Homepage

• Strange problem with ports USB on my Satellite A300-243

  Hello

  I have the following problem. So far, I have 4 USB ports, and only my USB key and key to my friend works there. All other USB keys (I tried mby 20 different ones) does not work: aks for, pilot research, etc...

  I spent many hours together in the internet search, but I didn t find a USB driver, but I don't even know what I'm looking for. So please, I would be very happy if someone could help me with this.
  And I forgot: other devices do not work too. I use it y of the mouse, but it only works in the USB port on the left. Safely, he asks for driver...

  Thanks in advance.

  Hello

  Normally you n t need a driver for USB. On XP, Vista and Windows 7 the stick will be automatically installed and no driver is no longer necessary.

  Can you please tell us what OS you are using? This happens with the factory settings or you have installed another OS?
  You should try with the factory settings and update the chipset driver. You can find it on the Toshiba site. In addition, updating the BIOS could also be helpful.

• Problems with porting boost::regex when ranging from CS6 to CC2014 using Xcode

  I have a job in CS6 project which uses the framework boost::regex I have porting problems in CC2014.

  I wore this project using Dolly to create a new project, and then face the old files source overall, finally update the output of various dated calls to API InDesign that appeared when I compiled. For the use of regular expressions, I added the debug and release builds of the boost_regex.framework to the respective targets.

  Now, for the version new projects of CC2014 debug builds with happiness. But when I switch to the Release version I get some errors from the linker. They all have something like:

  Undefined symbols for x86_64 architecture:

  'boost::re_detail::get_mem_block()', referenced from:

  Boost::re_details:perl_matcher < __gnu_cxx::__normal_iterator < const char *, std::string >, std::allocator < boost::sub_match < __gnu_cxx::__normal_iterator < const char *, std::string > > >, < char, < char > boost::cpp_regex_traits > boost::regex:regex_traits >: find_imp() in SbRegex.o

  etc.

  I did a bit of reading through the impetus of header files. The strange thing is that the 'get_mem_block()' seems to be set for option pre processor BOOST_REGEX_NON_RECURSIVE, while in the project contains parameters for BOOST_PREPROCESSOR_DEFINITIONS BOOST_REGEX_RECURSIVE. These two parameters are mutually exclusive, and it is logical to preprocessor that blocks with both cases, defined both.

  This recursive option is used to control the use of memory when processing a regular expression, then see a call get_mem_block() (other errors of link imply a call to put_mem_block) somehow made sense being called that look like something to do with memory.

  I'm trying to understand why the debug builds, but Release version fails. This problem sound familiar to anyone? Anyone have any suggestions to try to fix it?

  Figured out how to build the project when you add the framework for regular expression of thrust.

  The key is the optimization level. When Dolly creates a project it defines the level of optimization for the Release version of "-O3". When you use boost::regex, you can only link correctly if you use the O0 and O1 optimization levels. Highest and link errors I saw appear.

  For the Release version, so I put in the Release_Cocoa64 build parameters 'Optimization level' to ' Fast [-O, O1] ' and it compiles.

• I just bought an Airport Extreme and try to put in place.  I have Fios cable with a router.  I can not get anything except a blinking orange light.  After reading the instructions, it seems that the problem with the ethernet cable but I

  Must not exceed the flashing orange light.  have tried three ethernet cables to the Fios router.  All thoughts

  What extreme version do you have?

  Test the cables connecting the airport to your Mac with them and see if the ethernet works on Mac. Green connectivity light should go... If it fails, then the AE died.

  Please do a factory reset, then try again.

  Sometimes Mac airport utility works well... If you have the preference or iphone ipad, download and use iOS version airport utility and try it for configuration... It is much less awkward.