problems with Prem El 14 with 4 k make export and record... ghoulish 2 video on the laptop cards be causing problems?
Had problems with the 4 video editing k with an old laptop i5 with memory on board and recently bought what I thought would be a better laptop computer editing video. The ASUS GL552VX laptop has a 6700 CPU i7, a solid state drive OS, 16 GB of RAM and a NVIDIA GTX 960 video m with 4 GB memory card
Unfortunately I had problems frustrating edition of 4 videos k on the ASUS and export to 4 k with my new Setup. It seems to work well with 1080 media
When I try to export the edited 4 k media on the timeline, it will not be saved or export but indicates simply is to save but a 4 minute video is same not start saving /rendering, not to mention export after an hour. Finally, I thought that was my success today, but he ceased to save 93% during the export.
When reviewing similar since 4 k problems posted on this forum, our expert resident, Romano advises that the 960 M will not help with first items 14 and that the NVIDIA card can actually cause a problem because the second mother 'onboard' Council on the ASUS video card. There is little other info on it except a mention that power off of one of the video cards may be useful.
If Mr. Romano or any other users of knowlefgable or experts can throw some lite on my k problems 4 it would be greatly appreciated
PROBLEM SOLVED! ??
Reduce the resolution of 4 k display my laptop computer ASUS 1920 x 1080, adjusting the W10 to 125% and NVIDAS and INTELs scaler directly download site and tried to update the graphic display ASUS drivers two.
Three things or a combination did the trick! Note: I had put previousll to update the drivers through driver latest ASUS Web site post utility, but read that drivers should always be downloaded directly from the manufacturer's Web sites.
Video test 4K have been edited in Prem El and exported to 4 k without a hitch.
Crossing my fingers that I could solve the problem
Tags: Premiere
Similar Questions
-
I have an iPad Air. I took a 40 min video with my iPad and am able to see it on the iPad. However, when I tried to transfer it to my laptop, I see this video on the laptop from the list of the iPad. It shows and transferred everything that I took on the iPad (other shorter videos and pictures) just not the big one one. How can I transfer it? Help, please.
This seems to be a "feature".
You must use an application like
"Dukto is a simple application that allows you to share files between devices connected to the same LAN (wireless) network."
http://www.tidal.it/?page_id=309&lang=en
http://www.msec.it/blog/?page_id=11
more info here:
How can I transfer large video files to iPad 2 for PC or a memory card without compression?
-
Windows Easy Transfer of 64-bit to 32-bit, or vice versa
HelloI'm trying to fix my settings my current machien to a W7 VM user to make sure that I have the transfer settings and I get all the information I want. My machine is 64 bit, but the VM is 32-bit. I can't seem to get the easy transfer Windows from Windows Vista to play with Windows 7 easy transfer and can't seem to install the transfer Windows 7 because it gives me only a 32-bit version to install...
How I have a 64-bit Windows 7 Easy Transfer to install and if I get one to install and build a transfer saved the data file has there 'restore' on a 32-bit Windows?
George George P Botuwell, programmer
Hi George P Boutwell,.
Thank you for using answers Forum.
I think that VMware has a 64-bit/function version. You will need to contact them to verify this.
64-bit to 32-bit is not supported by Windows Easy Transfer, as far as I know.I hope this helps.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hello
I need to know is below customer vpn will work for windows 2003 64-bit, according to the release notes I doubt it will work.
name of the file - vpnclient-winx64-msi - 5.0.07.0290 - k9.exe
release notes - http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/vpn_client5007/release/notes/vpnclient5007.html#wp63537
WILL take the ip address but does not connect. It is possible some configuration or ASA image issue that her first time, we try to use 64-bit OS, for 32 bit OS vpn client works very well.
on the pc screen, it says - reason-442: impossible to activate the virtual card.
Here are the logs of vpn clinet when I tried to connect ASA5520. Version 7.0 (8).
Cisco Systems VPN Client 5.0.07.0290 Version
Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.
Customer type: Windows, Windows NT
Running: 5.2.3790 Service Pack2
Config files directory: C:\Program Files (x 86) \Cisco Systems\VPN Client\1 15:38:03.921 27/01/11 Sev = Info/4 CM / 0 x 63100002
Start the login process
2 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100004
Establish a secure connection
3 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100024
Attempt to connect with the server "203.199.30.190".
4 15:38:04.125 27/01/11 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 0 IKE SA authenticated user in the system
5 15:38:04.140 27/01/11 Sev = Info/4 CM / 0 x 63100015
Launch application xAuth
6 15:38:09.515 27/01/11 Sev = Info/4 CM / 0 x 63100017
xAuth application returned
7 15:38:09.515 27/01/11 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 1 IKE SA authenticated user in the system
8 15:38:10.562 27/01/11 Sev = Info/4 CM / 0 x 63100019
Data in mode Config received
9 15:38:10.781 27/01/11 Sev = WARNING/2 CVPND/0xE340002C
Impossible to activate the 64-bit GOES after timeout
10 15:38:10.781 27/01/11 Sev = WARNING/3 CVPND/0xE3400029
The Client was unable to activate the virtual card on 64-bit Windows
11 15:38:10.781 27/01/11 Sev = WARNING/2 CM/0xE310000A
Impossible to activate the virtual map
12 15:38:10.781 27/01/11 Sev = Info/6 CM/0x6310003A
Cannot restore the file road changes.
13 15:38:10.781 27/01/11 Sev = Info/6 CM / 0 x 63100037
The routing table was returned to the original state before the virtual card
14 15:38:10.859 27/01/11 Sev = Info/4 CM / 0 x 63100035
The virtual adapter has been disabled
15 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE300009B
Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)
16 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE30000A7
SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)
17 15:38:11.546 27/01/11 Sev = Info/4 CM / 0 x 63100012
ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '. Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system
18 15:38:11.546 27/01/11 Sev = Info/5 CM / 0 x 63100025
Initializing CVPNDrv
19 15:38:11.578 27/01/11 Sev = Info/6 CM / 0 x 63100046
Set indicator established tunnel to register to 0.
20 15:38:40.953 27/01/11 Sev = Info/4 CM / 0 x 63100002
Start the login process
21 15:38:40.953 27/01/11 Sev = WARNING/2 CVPND/0xA3400019
Fixing error socket:-21. (DRVIFACE:1234)
22 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100004
Establish a secure connection
23 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100024
Attempt to connect with the server "203.199.30.190".
24 15:38:41.156 27/01/11 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 0 IKE SA authenticated user in the system
25 15:38:41.171 27/01/11 Sev = Info/4 CM / 0 x 63100015
Launch application xAuth
26 15:39:08.031 27/01/11 Sev = Info/4 CM / 0 x 63100017
xAuth application returned
27 15:39:08.046 27/01/11 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 1 IKE SA authenticated user in the system
28 15:39:09.093 27/01/11 Sev = Info/4 CM / 0 x 63100019
Data in mode Config received
29 15:39:09.312 27/01/11 Sev = WARNING/2 CVPND/0xE340002C
Impossible to disable the AV 64-bit after timeout
30 15:39:09.312 27/01/11 Sev = WARNING/3 CVPND/0xE340002A
The customer does not have to disable the virtual card on 64-bit Windows
31 15:39:19.937 27/01/11 Sev = WARNING/3 CVPND/0xA340000D
The virtual card did not recognize the operating system.
32 15:39:19.937 27/01/11 Sev = WARNING/2 CM/0xE310000A
Impossible to activate the virtual map
33 15:39:19.937 27/01/11 Sev = Info/6 CM/0x6310003A
Cannot restore the file road changes.
34 15:39:19.937 27/01/11 Sev = Info/6 CM / 0 x 63100037
The routing table was returned to the original state before the virtual card
35 15:39:20.109 27/01/11 Sev = WARNING/2 CVPND/0xE340002C
Impossible to disable the AV 64-bit after timeout
36 15:39:20.109 27/01/11 Sev = WARNING/3 CVPND/0xE340002A
The customer does not have to disable the virtual card on 64-bit Windows
37 15:39:20.281 27/01/11 Sev = WARNING/2 CVPND/0xE340002C
Impossible to disable the AV 64-bit after timeout
38 15:39:20.281 27/01/11 Sev = WARNING/3 CVPND/0xE340002A
The customer does not have to disable the virtual card on 64-bit Windows
39 15:39:20.578 27/01/11 Sev = WARNING/2 CVPND/0xE340002C
Impossible to disable the AV 64-bit after timeout
40 15:39:20.578 27/01/11 Sev = WARNING/3 CVPND/0xE340002A
The customer does not have to disable the virtual card on 64-bit Windows
41 15:39:20.953 27/01/11 Sev = WARNING/2 CVPND/0xE340002C
Impossible to disable the AV 64-bit after timeout
42 15:39:20.953 27/01/11 Sev = WARNING/3 CVPND/0xE340002A
The customer does not have to disable the virtual card on 64-bit Windows
43 15:39:21.437 27/01/11 Sev = Info/4 CM / 0 x 63100035
The virtual adapter has been disabled
44 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE300009B
Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)
45 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE30000A7
SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)
46 15:39:22.046 27/01/11 Sev = Info/4 CM / 0 x 63100012
ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '. Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system
47 15:39:22.046 01/27/11 Sev = Info/5 CM / 0 x 63100025
Initializing CVPNDrv
48 15:39:22.062 27/01/11 Sev = Info/6 CM / 0 x 63100046
Set indicator established tunnel to register to 0.
Also you need to be in 8.0 code run client Anyconnect.
--
Robet
-
Signature of the problem
Problem event name: BlueScreen
OS version: 6.0.6000.2.0.0.768.2
Locale ID: 2057Files helping to describe the problem (some files may be is no longer available)
Mini111709 - 01.dmp
SysData. XML
Version.txtSee a temporary copy of these files
WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.Additional information about the problem
BCCode: 1000008e
BCP1: C0000005
BCP2: 81FA7519
BCP3: 851D1F98
BCP4: 00000000
OS version: 6_0_6000
Service Pack: 0_0
Product: 768_1
Information about the server: a64044ff-cd2c-4992-88b5-e4083f658b84Hello
Two main causes of this blue screen video drivers and BIOS - check with system manufacturer site for
View of the adapter (video) and BIOS, then on site of the manufacturer of the device for the last video. There may be other drivers
in order to check there. DISABLE the auto-pilot plant as those who are older and if updates Windows suggests
a pilot just HIDE. Antivirus is another possibility.See methods of update driver generic in the next message.
BCCode: 8th 0x0000008E
Cause
Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.
Common exception codes are:
- 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.
Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques:
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.
If you do not know the specific cause of the exception, consider the following:
- Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
- Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.
If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.
If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.
Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.
The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.
You can solve the problems of BIOS by upgrading the version of the system BIOS
=============================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm-------------------------------------------------------------------------
It comes to my convenience store generic bluescreen:
Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
information on all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.
You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Hello
I use the WRT1900ACS 2.0.0.173388 firmware and I noticed a few videos with. Just SRT subtitles does not work on my smarttv via DLNA server.
I have some MKV videos with. The SRT subtitles I can perfectly look through DLNA, but. MP4. AVI and others. MKV seems simply do not find subtitles.
All of these videos with. SRT subtitles, I can watch properly on my Mac or directly into the USB port on the TV, which seems to clearly be a problem with the router or some settings.
I tried to rename the extension of the file from. MP4 and. AVI to MKV, but also did not work.
Are there other settings that I can do?
I suggest you use a software of 3 rd-party, which we are not trained for, that can integrate the file of external subtitles for YouTube videos. Media Server is a router feature that will allow you to stream multimedia files to your DLNA or active UPnP devices within your network. With this, external subtitles as SRTs file may or may not be detected because it is not a file of DLNA support.
-
I ran two computers and would like to be able to download Lr jobs made on my laptop, my PC fixed, also used to treat other images, all stored on the same disk.
In other words, I want to deal with may photos on both PC and have access to all analyses of one or even two computers better regardless.
Samek.
This was very helpful. Thank you very much
Samek
-
I use iDVD to produce videos of my marriage. Latest updates of operating system, the program requires an administrator password to enable atos to continue debugging, and upon entry, iDVD just stops. Is there a way to get around this?
Hey there WAPhoto,
I understand that you experience a problem when you try to open iDVD on your computer. I would suggest a troubleshooting step for you that can solve this problem. Please, go to your library folder by using the information in this link:
In the Finder, click the menu go to the menu bar, and then choose one of the following:
Library: Hold down the Option key, and then choose library.
OS X El Capitan: go directly to a specific folder
https://support.Apple.com/kb/PH22187
From there, navigate to your Preferences folder. In this folder, find the plist labeled "com.apple.iDVD.plist" and move it to this folder on the desktop.
Out of this folder and go to the Caches folder. In this folder, find the folder named com.apple.iDVD and move the file named 'Cache.db' in this folder on the desktop as well.
At this point, you can close the Finder window and relaunch iDVD. If iDVD opens without a problem, you can move the files that you moved to the desktop to the trash and continue to use iDVD as you wish.
Thank you for coming to Apple Support communities!
-
In addition, about half of my 8,000 e-mails are unread. Thus, the fact of having 4 000 unread emails in my mailbox Windows (Vista) slow down my computer more than if they were 4 000 read emails?
If so, is there a quick way to mark all read emails as read in Windows Mail (Vista)? .. .in windows Live Mail (Vista)?
Even if these unread e-mails degrade the speed, is there a quick way to mark all read emails as read in Windows Mail (Vista)?... .in windows Live Mail (Vista)?
I also regularly get an alert Norton of 'Use of disc high by Microsoft Windows Search Indexer.' Gravity is the next, and what can I do to fix the problem?
Finally, I have a lot of folders: would have 2,000 emails in the Inbox Windows (Vista) slow down a computer more than if 2 000 mails were one or more files? This change of response if the e-mail is unread vs bed?
#2: the Inbox is accessible by your computer whenever he asks new messages. The fact of having 1,000 messages in the Inbox slow it down? I have no personal experience, since I never have more than a dozen or messages in my Inbox, but it is so likely. If you have lots of free space on the hard disk, the messages would be better in another folder (s). Even if you create more WinMail's local folders and move messages to them.
I would also say this. Try to compact and repair the database.
WMUtil
http://www.oehelp.com/WMUtil/default.aspxIt can be very useful, and it can't hurt anything.
-
How to cancel or confirm that I will receive a full refund, since it's still in the 14-day requirement? I have no idea what serial number, I have to this export adobe pdf or how I'm supposed to save it. This part of the process I need to fill for the cancellation and refund? Thank you
Hello
Please check the help below document:
ICES.html https://helpx.adobe.com/x-productkb/Policy-Pricing/Cancel-subscription-Acrobat-Online-serv
Kind regards
Sheena
-
Help with opening of CD disc too little fear of support against the laptop pin HP Pavilion dv2617us
Learn to use the laptop just wanting to play the CD. The tree seems too big for the CD to fit above him. Is there something I need to do first? I see the teeth around the axis should they compress the CD we slump on it?
Thanks for your response in advance.
Hello
Normally, it has 3 small latches, they are there to keep the CD sit properly. Should be ok, just press the CD, you may be able to hear a 'click '.
Kind regards
-
Separated from this thread.
Joachim
When first pose the problem? Was it before or after the December updates?
KB3004394 and KB3024777 appear in view update history? Or do they appear in installed updates?
Gerry, thanks for your post. I have the same problem as Joachim started this thread. I am running Windows 7 sp1. I have a Dell computer and it's certainly a legitimate copy of Windows (confirmed computer 'properties' and it is enabled).
By your post, I saw just to update and the KB3004394 (installed on 12/10/2014) and KB3024777 (installed on 12/12/2014) show as comfortable. I usually leave the Windows download updates automatically and I install them to stop. I watched the second update and according to Microsoft.com:
Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2
The KB 3004394 update which was dated December 10, 2014 can cause additional problems on computers that run Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1. This includes the inability to install future updates. This new update is available to remove KB 3004394 from your computer.
My problem is, as of today 14/12/2014, I still get the pop up "this computer is running not windows genuine', even with KB3024777 installed.
Any thoughts?
Thank you
Bob C
Right-click on CMD
Click on run as administrator
At the command prompt, type the following commands:
slmgr.vbs - ipk xxxx-xxxx-xxxx-xxxx (to replace the specified in the current product key)
xxxx-xxxx-xxxx-xxxx - represents your product key
Press enter on your keyboard
Then type: slmgr.vbs - ato (this will force the activation)
Leave the command prompt
Restart your computer
-
iCloud want to remove my iphone 5 but I can't not leave me with my e-mail password and need help
iCloud want to remove my iphone 5 but I can't not leave me with my e-mail password and need help
Welcome to the Apple community.
If you don't remember the password, reset it to...
-
setting up a dual XP/Vista with a copy preinstalled Vista and no vista CD
When I learned how to do the dual boot about 10 years ago, I learned that you first install the oldest Windows (95, 98, etc.), and then install the latest copy of windows (server, 2000, XP).
I just got my hands on a laptop with Windows Vista. He has an unused partition that I would use to make a dual boot with my copy of XP Pro because I don't have the vista installation DVD and it should work better, because the laptop has only 1 GB of RAM. A decent amount of RAM for XP, but not enough for Vista. There are questions I mentioned here , and I hesitated to choose this option as I used my copy of XP pro for a virtual machine to play with she was attending night school
How can I go about installing XP? I guess if I boot my XP CD and select drive D, it would replace the boot on drive C sector and install mess up Vista Home Premium. I have no way to reinstall Vista HP that I have only a gateway 64 bit OEM CD rather than an Acer 32 - bit OEM CD and if Vista is something like XP they do not accept other product keys.
SlickRCBD salvation,
You're right, Windows XP will replace the Vista boot sector; However, there is a solution. See this link from my Web site:http://vistasupport.mvps.org/install_windows_xp_on_machine_running_vista.htm
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com
-
Original title: 'make sure that your Internet protocol bindings are Correct (DELL Inspiron 530 Intel 82562V and Desltop)
I'm doing tech support for the family and I'm stumped. They had a Dell 530 with an Intel 82562V-2 and is no longer connected to the internet.ipconfig/all statements
Hostname...: wayne-PC
Suffix main DNS...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.That's all. Windows gives errors two errors:
(1) the card network knows of driver or hardware problems
(2) check that your Internet Protocol connections are Correct
I installed the latest Intel drivers and TCP IP settings are checked for V4 and V6. I even went as far to install a new Dynex Ethernet card that gets the same mistakes.
I even tried the netsh reset ip and netsh winsock reset command. I have no idea what to do next. I searched glasses and found similar problems with the same model of Dell and card, but they have been fixed by rebooting.
Hi MButIer,
-How long have you had this problem?
-Was any change in software because the computer before the show?Follow the steps mentioned below:
Step 1:
Temporarily disable the antivirus software (and any other security software) and the firewall on the computer as a test. Once disabled check if you can connect to the internet without any error.
If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.
Note: Make sure that you enable the antivirus software, other security and firewall programs.
Warning
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 2:
Perform a System Restore to a point before the show and check if this solves the problem.
See also:
System Restore: frequently asked questions
If the steps above do not help, the best would be to get in touch with the Internet Service Provider (ISP) for assistance.
Hope this information helps.
Gokul - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
Maybe you are looking for
-
Update to iOS 10 will require Apple ID?
Long story short, my Apple ID has been locked and I forgot all my security questions and there is no way to unlock. Last time I updated my iPhone software, before I could use my iPhone in the new update, I had to enter my Apple ID, due to his confine
-
How to create a playlist on a NWZ-W270?
I love this product, but the support is terrible. Something happened to my Walkman, I had to delete all the songs and now I can add songs to the Walkman but can't make a Playlist itself and the songs aren't in the right order. Grrrrr. Once again, GRE
-
I have a printer 1522nf MF that is connected with a cable to a PC HP Windows 7. A router is also connected to the PC. I'm trying to get my laptop to print over my home network, but the printer does not appear on my laptop. The printer is a network p
-
ENVY dv6-7214nr - mSATA does not start
ENVY of HP dv6-7214nr - 8.0 Windows (x 64) I installed a KINGSTON 30 GB (KINGSTON SMS200S330G) mSATA with 8.1 Pro N (x 64) Windows on this subject, to use as a boot device. The system recognizes the new hardware, but when I try to set the mSATA as th
-
How can you uninstall Microsoft Robotics Studio.
I installed Microsoft Robotics Studio for a SAM project and now I need to uninstall it, but I can't find it to uninstall programs on XP. I see only a series of programs that I instaled never what programs should I remove to comepletely uninstall Robo