Problems with Siebel HI calendar from Microsoft Update KB2360131

Similar Questions

• I can't install the SP3 from Microsoft Update Center

  I can't install the SP3 from Microsoft Update Center.So I contacted Microsoft Support and ran diagnostic scan tool and sent the results. They send e-mail attachment reset_subinacle. It's done. FAILED. I tried 3 times and 2 days later... still cannot copy beethov9.wma. file. So now what should I do to get this SP3 on my son's computer? My son has enough disk space for SP3 and I made sure and prepared for this installation. Does anyone know what I need to do? Help!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  jneen420

  Yes, I'm familiar with your recent discussions on this particular computer as well as the fact that he gave to your son as a used computer. Be so familiar with the history of this computer, I feel confident in saying he was already infected when he gave your son.

  I fear that the only way to get this computer secure and fully patched to Windows Update will be formatting the hard drive - and then do a clean install of Windows.

  Since you don't have the disks that originally came with the computer (and assuming that the original owner would have given them to you when gave you the computer if there were), we must assume (or at least to cross our fingers and hope) that there is a hidden restore partition that could be used to return the computer to the condition it was before first it left the factory. I can assure you that can support Dell & will help you, if not directly through the Dell Community forum:http://en.community.dell.com/support-forums/desktop/f/3514.aspx

  Follow the instructions below:

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care ofeverything on the next page before otherwise connect the machine to the internet or one local network (i.e. other computers) and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  If you need extra help (in addition to that provided in the Dell forum), please start a new thread in this forum MS:http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility. Expect to pay about $150 USD (or more) for this service.

  [Yes, times are tight for all of us right now. [You might find a computer local club or a technical school that could do this work for you free of charge.]

  Wish I had better news for you, Jeannine. Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I received the following from Microsoft Update: 0x8024400A and 0 x 80240036.

  ORIGINAL TITLE: PROBLEM WITH WINDOWS XP Microsoft Update

  Had a hardware failure.  I had to retrieve via the backup CD, which took me to Windows XP SP 1.  After download SP 2 (in order to get to the current SP3), I received the following from Microsoft Update: 0x8024400A and 0 x 80240036.  Can you help me?

  Had a hardware failure.  I had to retrieve via the backup CD, which took me to Windows XP SP 1.  After download SP 2 (in order to get to the current SP3), I received the following from Microsoft Update: 0x8024400A and 0 x 80240036.  Can you help me?

  If you have downloaded Windows XP SP2*)<-- that="" is="" a="" link)="" onto="" the="" system="" in="" question="" (saved="" it,="" for="" example,="" to="" the="" desktop)="" and="" you="" reboot,="" logon="" with="" an="" administrative="" level="" user="" account="" and="" double-click="" on="" the="" downloaded="" file="" -="" and="" what="">

  While you have downloaded Windows XP SP3*)<-- that="" is="" a="" link)="" onto="" the="" system="" in="" question="" (saved="" it,="" for="" example,="" to="" the="" desktop)="" and="" you="" reboot,="" logon="" with="" an="" administrative="" level="" user="" account="" and="" double-click="" on="" the="" downloaded="" file="" -="" and="" what="">

  So, first thing after a reboot and connect as an administrative user, you are visiting http://windowsupdate.microsoft.com/ in Internet Explorer to do a CUSTOM for updates scan and what do you find?

  * Yes. Yes, you are a professional as far as this effort is concerned.

• Cannot download the update from microsoft &#62; update security for windows media encoding for windows xp and windows server 2003 kb2447961

  I am running HP pavillion A1130n desktop computer > problem > I can not IN stall Microsoft Update > update security for windows media 9 for windows xp and windows server 2003 kb2447961 of coding... .e send me a response message. > * E-mail address is removed from the privacy *.

  Hello
  
  1. don't you encounter any error message during the installation of this update?
  2 is this problem limited to this particular update?
   
  I ask to download the update manually and then install it.
  Here is the download link:
  A security update for Windows Media Encoder 9 Series for Windows XP and Windows Server 2003 (KB2447961)
  http://www.microsoft.com/downloads/en/details.aspx?familyid=EF0ADA2C-965F-438F-A1D3-BD45DB8460C1&displaylang=en.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem with my cc speedgrade since I updated my laptop for windows 10

  Hi, Pleas help me!

  I had a problem with my cc speedgrade, since I updated my laptop for windows 10. whenever I want to start speedgrade there is an error warning that tells me speedgrade does not work? did anyone else have this problem or someone has an idea to fix

  Best regards

  Jan

  Post edited by: Kevin Monahan

  Reason: The title was too long

  Hello

  I just solve my problem... Directory settings user removed from SpeedGrade and now everything is fine!

  C:\USER\xxx\AppData\Roaming\Adobe\SpeedGrade\9.0\

  Christian

• Problems with Vista OS SP2 after automatic updates: using OneCare; application of integrated keylogger HP CPU "HP SDP" made by IBM in Durham, North Carolina (?); corrupted Samsung print driver downloaded from the website of the company

  Entered possible hacker:

  1. techie OneCare WINS access - probably not unauthorized and do not believe it causes always provided a quality service, but they have had access in the past.

  2 HP technicians - have had access to my computer once - did a good job with computer crash (not sure cause), but tried to sell me more HP products when I have no money...

  3. after the technicians HP did good job with crash, started to have pop-ups keep HP application that appeared as an add-on that works without permissions on my computer. Google the name of the HP SDP application > recovered information said program is IBM in North Carolina. Called them. Nobody gives any information on the program until I got ahold of a person who gave me the phone to techie Dept. It took all day. Not have not yet contacted technology because they have closed before I could call.

  4. called HP to inquire about the search info from HP SDP. on his goal? HP said he works as a keylogger you sell stuff. But what was weird is after the system crashed and repaired, there was one day that he has opened three times in ten minutes! The behavior of the application has changed after my OS has been repaired. Then after that I indicated HP where I found information on this program, the program disappear from the list of "run without permissions" in internet options explore > manage add-ons > run without the permissions list

  5. one day, I'm working on a word document, and the printer stops abruptly, impression. No amount of turn, or by clicking 'Cancel' will get doc from the printer queue. MS literature said this could be a security issue. The printer says "printing of documents", but no printing at my end.

  This problem is compounded when I delete browsing history and try to refresh the internet Explorer. That activity seems to take pieces of the program Samsung printer with it, even if I had excellent results in the past with Samsung printers and their downloads, and I never had the damaged printer driver to exercise this activity in the past.

  If I didn't have a short term in the Court of appeal in a week, I would say it's a question of OS, or program problem, but it's as if something falls down as soon as another issue is fixed and the unusual behavior of the computer, more timing and the purpose of the brief to me 90% sure that this is a pirate or a virus the surplus of the Samsung driver deleted pieces being left on my machine after uninstall.

  Dear Karena R,.

  Thanks a lot for your excellent advice. The Techies MS OneCare fixed the popup of HP before I read your message. (I was remiss to check my email...). I'll follow the instructions you sent me and am running the OneCare security right now, online scanner that I already know an excellent and effective tool because it has repaired my MS operating system and programs after that I accidentally deleted parts of the operating system by removing a .dll file, I need or such a thing! I also wanted to thank you for the information about the object of the HP SDP pop-up window. I saved your instructions on how to remove this case, the pop up appears again. One thing I noticed is that, after removal, some keys on my keyboard don't work, and I've read that other HP users encounter the same problem with the keys on the keyboard. The keys that seem to be affected are the keys that automatically open and close the door of the CD burner. Not a problem, because it is another way to open and close the drawer. It's one that HP must improve. In regards to your advice on the printer driver you have been 'right on' new! I reinstalled the driver using my own CD (not the latest driver, but one that works!) I think that the problem with the update of the Samsung driver that I downloaded from the Web site doesn't have some kind of problem. It is very unusual for a driver to Samsung, because I got excellent results with printers Samsung and free updates downloaded from their Web site. The first Samsung printer I had worked so well, for so long as the small rubber roller that takes the paper and it feeds through the printer wore out until the printer is, literally in a 100,000 pages printed after that I bought for about $80.00 dollars! So, I went out and bought another one, and that's what I use now. The printer works fine now, except for some reason, the icon in my taskbar notification area, allow to check the printer the status of jobs, cancel or repeat printing as before. Once. from time to time, a job stuck in the queue for the printer and will not erase unless I unplug the printer from the central unit. Nor will it print. But since I reinstalled the driver, this has happened only once. With the downloaded update, it happened all the time. It is possible that my OS is misconfigured, but I started to run the routine tune ups and analyses using OneCare and unless I used to defragment. I learned that the defragmentation of the hard disk too can cause problems also. The last thing is, I think that sometimes, tiny files needed to run my OS and files other programs can be sent to my temporary folder by accident. MS still once, All_Knowing computer, somehow recognizes the files I need and pushes me to ignore them, but perhaps it does not work for non-Microsoft like Adobe programs. I will use the link in your message to run the fix with the printer driver just to see if it works. If it is not the case, I can always reinstall the driver with my CD that came with the printer. Thanks for the excellent and informative tips and forgive me if I do not respond sooner!

  Sincerely,

  E-mail address is removed from the privacy *.

• Screen white (on two laptops) from Microsoft update!

  I have TWO laptops that have developed the same so-called 'fault' which, according to microsoft is a mistake of the laptop I read of another user on this forum to have the same problem. Both my laptop suddenly develop these flaws strangely the same day... come on!... It's since a update of Microsoft, why are not you be open by saying that you screwed up!   Two totally different laptops wrong all of a sudden the same day!

  I have to rely on cold to get my screens to appear again, as this column also includes out of sleep mode.  I guess that another 'corrected' update is on its way!

  Your interesting Microsoft response... If you dare!

  Hello
   
  (1) what version of Windows are you using?
  (2) remember the last update you did prior to this problem?
  (3) remember you to make changes to the front of the computer, the problem (apart from Windows update)?
   
  Try the methods listed below, if you are using Windows 7 and check if it helps.
   
  Method 1: Test the issue in safe mode
  Check if you are able to boot in safe mode. Visit the link below to find out how to start the computer in safe mode.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
  Method 2:

  To resolve this problem, you may need to set your system to the boot.

  Check the link to learn more about the clean boot below:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Don't forget to return the computer to normal after completing the troubleshooting by following step 7 of the article mentioned above.

  Method 3:

  I recommend you to update the display drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.
   
  1. open Device Manager by clicking the Start button, clicking Control Panel, clicking on system and
  Maintenance, and then clicking Device Manager. If you are prompted for an administrator
  password or confirmation, type the password or provide confirmation.
  2. in Device Manager, find the device, and then double-click the name of the graphicsdevice.
  3. click on the tab driver , then click put to update driver and follow the instructions.
   
  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Method 4:

  Check the event log for error messages related to updates, drivers and black screen.

  Follow the steps in the link:
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  For more information, see the link below.

  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Hope this information helps.

• Windows XP download with proof of purchase from microsoft

  My original home edition of Windows Xp disk was stolen with my car and now I need to stop this problem of error i386 on my desk. I still have 25 digit key code. So is it possible of doen loaded from microsoft?

  irrps,

  I can't help with your question, but - I'm not sure about that - but it looks promising - try

  The customer service and Support http://support.microsoft.com/?id=326246 information

  Please let us know if that helps.

• Change the path to the updates from microsoft updates vs. windows

  Fully updated, xp pro, ie8

  When you click Start, all programs, windows update, go to the updates of microsoft with the compatibility view

  which connection online for microsoft updates gets updates microsoft without compatibility view

  can I change the path for my start, all programs, windows updates to be updated from microsoft without view compatibiliy?

  Edit: have reinstalled os with a sp3 slipstreamed cd.

  Edit2: no sites are not listed in my compatibility view settings.

  There is no need to uninstall/reinstall MSE.

  1. open IE (only!) to Microsoft Update . Click change settings in the left pane. Scroll to the bottom of the page. To stop using Microsoft Update. Disable the Microsoft Update software and let me use Windows Update only (check).

  1B. Reboot for good measure.

  2. your shortcut on the start menu should now be updated to Windows . [1] use it (not the Tools menu pull-down option) to go to http://update.microsoft.com/windowsupdate. Assuming that it does NOT open in compatibility mode...

  3. "Flip" your source of default update appropriate Microsoft update by clicking on the option / link on the main page of Windows Update (IIRC).

  3B. reboot for good measure & test to see if the Microsoft Update shortcut on your Start menu will however open IE8 in compatibility view.

  PS: I don't have a WinXP box handy to test myself, but the last time I used the Microsoft Update shortcut on one of my client computers, it has not opened in compatibility view. As far as I know, MS may have changed something since then so YMMV.

  =============================================================
  [1] If you persevere with Windows Update as a source of update by default, MSE will always be 'auto-update' [even thought that Windows Update will offer more optional updates Defs] but will offer no updates to the ESM (e.g. new versions MSE) program or updates for MS Office, Silverlight, or Skype .

• Freezing problems with Live Mail since the last update

  I used Windows Live Mail because it is out of beta and has never had as many problems with the program that I do now since the last update which gave him a new look.  (I would include the version, but I still find it).

  The new Live Mail program constantly freezing, especially when moving e-mail messages to another folder, deleting groups of emails at once and its audit of new emails while I do something else that just read an email.

  I also have difficulty emptying the deleted email folder.  I click the x to clear the folder only to return later and find that emails are still there.

  Once again, I enjoyed the convenience of Live Mail, now I find that I use it less.

  'Camiele' wrote in the new message: * e-mail address is removed from the privacy... *

  I used Windows Live Mail because it is out of beta and has never had as many problems with the program that I do now since the last update which gave him a new look. (I would include the version, but I still find it).

  The new Live Mail program constantly freezing, especially when moving e-mail messages to another folder, deleting groups of emails at once and its audit of new emails while I do something else that just read an email.

  I also have difficulty emptying the deleted email folder. I click the x to clear the folder only to return later and find that emails are still there.

  Once again, I enjoyed the convenience of Live Mail, now I find that I use it less.

  ------------------

  This is the wrong forum for questions of Windows Live Mail, please use the Windows Live Solution Center

  http://windowslivehelp.com/

  http://windowslivehelp.com/product.aspx?ProductID=15

  To find your version, click on the blue upper left corner > on.

  Best regards Steve. MS - MVP. MAIL. [DTS] UK. http://www.getsafeonline.org/

• x 200 tablet, still have problems with smartaudio after driver conexant last updated.

  where the devil file complaint or tech support, whenever I call it, there are people who do not know jack whatever it is.

  I had an x 200 tablet, was seen problem with the beams stupid mistake that keep popping up.  then I updated my drivers conexant coming out who was supposed to address this problem. But it doesn't, it creates more problem.

  Now whenever it starts, an error with smartaudio.   so, it leaves me with 2 choices, or I used the former driver who does not mistake smartaudio. but the beam forming erro. or I use the new driver that will give me the error smartaudio.

  anyone has the solution let me know please.

  running, updated vista business sp2.  and Yes, I've updated all the drivers that I find unnecessary and causes more problems for me.  as the update of the thinkvantage system that made it useless until I have some file and add vista business sp2 in it.

  Yay what's up, I answer to my own problem tech.  I hope this can help some of you.  CUS we are ourselves since lenovo cannot help us with our problems. they should just all the fire so that they can sell their products cheaper. for the ppl who work there are unnecessary.

  "OK for people with the beam forming the problem, just go to c:\program Conexant delete folder there, it's to say" TOMY.

  reason for this is because it won't let you delete the folder of conexant all at once.  and remove it to ensure that the new drivers to install correctly.

  After that, simply download and install the latest drivers from the website of lenovo conexant.   Now you should get only the smartaudio error when you switch to Tablet mode or laptop.

  just go to the c:\program files\CONEXANT\SAII directory, rename the smartaudio and SAIIcpl to something else.  I just added a _ in front of her.  This way, whenever you change the mode it will not create the smartaudio error. and you can rename it back later if you wish, or if someone comes up with a better solution

  now, you might ask, how can we change the parameters for the smartaudio.

  If you really want to set that just go to c:\swtools\drivers\audioc\smaudio\smaudio, there is an icon that is smaudio.exe you can double click and run it to change the settings.

  After that, you should not get the beam forming or smartaudio error.

  Lenovo has probably screwed up on some instructions, which does not run programs properly maybe that happens to people with vista sp2?

  CUS, I noticed that when I upgraded to sp2, the thinkvantage system update will not work until we edit some file and add vista sp2 in it.  You can search the solution on this forum if you have this problem.

  Thanks and good luck

  just need to do an update, while this method a bit worked, sometimes when I start I always get the beam forming the error.  It's just that it does more every time I switch between Tablet and computer laptop mode, which is better than nothing for now.

• audio device / I have a problem with the audio device from my computer

  No puedo playsecure musica in mi equipo nor any type of audio creo what must an audio to a problema con el device of

  I can´t listen to music or any audio on my computer. He said that there is a problem with the audio device... I Don t know that I have to do!
  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Problem with the registration of a Microsoft Publisher Document

  I encountered a problem with save a Microsoft Publisher document in PDF format.  I built the file with color photographs and then recorded then I changed inside page photography photographs black and white and registered with the designation of BW in the title.  I have the file in two forms: one is full color, and the second is a combination of color and black and white.  When I save the file with the black and white photos inside as a PDF, it saves as color.  No matter what I do, they keep coming to the top of color.

  I spent more than an hour in a meeting with Microsoft Technical Support, and pointed towards Adobe as having the problem.

  The file with photographs n & B are sent to an external commercial printer.  We cannot do printing in full color, and when they print the color and b & w, they look terrible.

  So he comes to solve the problem with saving the file in PDF format.

  Can you help me?

  I thinI think that your problem was caused by an update. Not Adobe software, not Windows, but for the Publisher. Logical, since the Publisher deploys the file. Here is a discussion Community of Microsoft . Best of all, Microsoft have a new fix for this, apparently. Make sure you know how to check the version of Publisher you run and decide if you want the automatic updates to it.

• Error: "there is a problem with your last payment. Please update your payment information. »

  I have a subscription to the CC since April 2016 here in Germany. I pay a monthly fee through Paypal. Each month, the subscription is supposed to transfer to Adobe.

  On 21 may, I received an email from Adobe indicating that there was a problem with my method of their choice of payment.

  Visit accounts.adobe.com I saw this:

  

  Even if there is an entry on the lower right side, saying: a Bill was created may 21, there is no entry on the paypal site, saying that the money was sent.

  In the Red Panel, it says (in German), "error!" There was a problem with your last payment. Update your details of payment of your service to continue. »

  I clicked on the blue link ("update your payment information"). Then I was asked to fill out a form (name, address, etc.).

  Then this window will appear:

  

  It is said: "we could not verify your address...". "etc.

  On the bottom there are two entries that say, "your registration" (on the left), "suggested address" (on the right side).

  I chose the suggested address, then he put me on accounts.adobe.com and it seemed to work as the Panel of red error message was gone.

  But the Panel of red error message to refresh the Web site's back, so nothing was fixed.

  What's not?

  Hello

  Please contact our support for this request here https://helpx.adobe.com/contact.html

  

  I hope this helps!

• Problem with the app on iTunes downloading updates

  In recent weeks I had problems with the availability of the Apple download servers.  Most of the downloads are refused because the server is not available.  If I manually choose each update I can get them later.  All the other progs work very well and iTunes diagnostics are all OK.

  Is this a general problem?

  I use iTunes ver 12.3.3.17 64-bit on Windows 10

  Try a forced reboot hold home and Sleep/Wake buttons simultaneously for about 15-20 seconds until the Apple logo appears. You won't lose anything.  Then sign out of the iTunes Store and log in.

  
  

  Depending on your situation, it is possible that the servers may be busy as well.