Problems with supposed strictly typed reference...

I am having some problems with the so-called references strictly typed.

Can anyone look at the related code (LV2010) and tell me why the example at the top of the page does not work and the background doesn't do. What more, the General method for only the top of the example page work?

The discussion of strict and low conditions typed is quite short in the help documentation. Pointers to the relevant documentation would be appreciated.

Thank you!

You can not write the Strings property of [] of an Enum during execution of the VI. If you need to do this, a common way is to use a ring of text instead of an Enum.

Tags: NI Software

Similar Questions

Strictly typed Enum reference "is not a simple upward or downwards cast" strictly typed reference enum

Facing a weird problem with Enums. I am filling an enum dynamically to allow some dynamic distribution during user input. I'm almost done, and this is the case:

The front panel on the right is the "Setup Enum" vi. On the left is the main VI, with a strictly typed control enum reference enter this VI. I have attached the vi hierarchy; Open "Curve.vi choose" to solve problems.

Solved this problem by changing ring datatype. Another question, when I change the label-increment/decrement property on that control manually, the code to change the label via a property node does not work unless I run the Subvi individually. I have the Subvi ("all the curves of Base Setup.vi") open (edit: same behavior no matter if the VI is open or closed). Why is this?

I have a problem with scrolling and typing on the computer.

Original title: I have problems with scrolling and typinging after a minute or so without the computer trying to go in the background, any help would be great because I will to throw the mouse across the screen very soon

as noted above, totally tired, I must right click of mouse to wake up on this page, I did it while typing grrrr big time. Help pleeeease

Hello

Thanks for posting your question in the Microsoft community.

I see that you have a hard time to work with the mouse.
1. What is the brand and model of the mouse?
2. The problem occurs on any program or when you perform a task in a particular program?
Try these steps and see if that solves the problem of performance of your mouse.

Method 1:

You can check that the mouse buttons are set correct.

Refer to the section "Change how the mouse buttons works", from following link to learn more about the same:

Change the settings of the mouse

http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

Method 2:

You can uninstall and reinstall the drivers for the mouse on your computer, to do so follow the steps mentioned below.

a. click Start, click Control Panel , and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
b. in the Device Manager, look for the device under the mouse and other pointing devicesand then double-click the device name.
c. click on the Driver tab, and then click uninstall the driver.

d. restart the computer and it will automatically re - install the drivers of.

Note:

You can also update mouse drivers by visiting the manufacturer's Web site.

See this link for more information:

Updated a hardware driver that is not working properly

http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

Let us know if you need help on this question or any question about Windows.

problem with the making of reference levels

Hello!

I have a problem with taking the basic lines - when the SQL is called from PL/SQL code...

For example if I run in the SQL session * more

ALTER session set optimizer_capture_sql_plan_baselines = true;

exec dbms_mview.refresh ("VIEW_CLIENT_KONTO", "C");
...
exec dbms_mview.refresh ("VIEW_CLIENT_KONTO", "C");

nothing happens... I can't find the base line in dba_sql_plan_baselines...
========================================================

optimizer_use_sql_plan_baselines = TRUE... of course and I can capture some baselines for SQL plain-not only if SQL is called from PL/SQL...

Now, nowhere in documentation I could find that capture does not PL/SQL... in my opinion, would disadvantage-code so sderious in the database runs as PL/SQL...

We habe Oracle Enterprise Edition 11.2.0.3

optimizer_features_enable = 11.2.0.3

What could be worng here... I forgot some settings or configuration. Thank you for your help in advance.

Now, nowhere in the documentation I could find that capture does not PL/SQL... it would be, in my opinion.
be sderious drawback-code so the database runs as PL/SQL...

You're quite right. It would be a serious disadvantage.
But it is not true that they are not captured in PLSQL.

Installation program:

SQL> select * from v$version;

BANNER
--------------------------------------------------------------------------------
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE    11.2.0.3.0      Production
TNS for Linux: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production

SQL> select name, value from v$parameter where name like '%baseline%';

NAME                                               VALUE
-------------------------------------------------- ------------------------------
optimizer_capture_sql_plan_baselines               FALSE
optimizer_use_sql_plan_baselines                   TRUE

SQL> create table t1
  2  (col1 number);

Table created.

SQL> INSERT /*+ domtest sql */ INTO t1 select 1 from dual;

1 row created.

SQL> begin
  2  INSERT /*+ domtest plsql */ INTO t1 select 1 from dual;
  3  end;
  4  /

PL/SQL procedure successfully completed.

SQL> select sql_id, substr(sql_text,1,30) sql_text, child_number c, to_char(force_matching_signature
) sig, sql_plan_baseline
  2  from   v$sql
  3  where  sql_text like 'INSERT /*+ domtest%';

SQL_ID        SQL_TEXT                                C SIG                            SQL_PLAN_BASELINE
------------- ------------------------------ ---------- ------------------------------ -------------
gmskus7sbgt5d INSERT /*+ domtest plsql */ IN          0 7407988653257810022
64rzqgrt63wzu INSERT /*+ domtest sql */ INTO          0 17374141102446297863

SQL> select to_char(b.signature) sig, b.created
  2  from   v$sql s
  3  ,      dba_sql_plan_baselines b
  4  where  s.sql_text like 'INSERT /*+ domtest%'
  5  and    b.signature = s.force_matching_signature;

no rows selected

SQL> alter session set optimizer_capture_sql_plan_baselines = true;

Session altered.

SQL>

Database created for the SQL statement:

SQL> INSERT /*+ domtest sql */ INTO t1 select 1 from dual;

1 row created.

SQL> select sql_id
  2  ,      substr(sql_text,1,30) sql_text
  3  ,      child_number c
  4  ,      to_char(force_matching_signature) sig
  5  ,      sql_plan_baseline
  6  from   v$sql
  7  where  sql_text like 'INSERT /*+ domtest%';

SQL_ID        SQL_TEXT                                C SIG                            SQL_PLAN_BASELINE
------------- ------------------------------ ---------- ------------------------------ -------------
gmskus7sbgt5d INSERT /*+ domtest plsql */ IN          0 7407988653257810022
64rzqgrt63wzu INSERT /*+ domtest sql */ INTO          0 17374141102446297863
64rzqgrt63wzu INSERT /*+ domtest sql */ INTO          1 17374141102446297863           SQL_PLAN_1ayk9a0wnr

SQL>

Database created for PLSQL statement:

SQL> begin
  2  INSERT /*+ domtest plsql */ INTO t1 select 1 from dual;
  3  end;
  4  /

PL/SQL procedure successfully completed.

SQL> select sql_id
  2  ,      substr(sql_text,1,30) sql_text
  3  ,      child_number c
  4  ,      to_char(force_matching_signature) sig
  5  ,      sql_plan_baseline
  6  from   v$sql
  7  where  sql_text like 'INSERT /*+ domtest%';

SQL_ID        SQL_TEXT                                C SIG                            SQL_PLAN_BASELINE
------------- ------------------------------ ---------- ------------------------------ -------------
gmskus7sbgt5d INSERT /*+ domtest plsql */ IN          0 7407988653257810022
gmskus7sbgt5d INSERT /*+ domtest plsql */ IN          1 7407988653257810022            SQL_PLAN_5s3v02k7yx9
64rzqgrt63wzu INSERT /*+ domtest sql */ INTO          0 17374141102446297863
64rzqgrt63wzu INSERT /*+ domtest sql */ INTO          1 17374141102446297863           SQL_PLAN_1ayk9a0wnr

SQL>

Cleaning guidelines:

SQL> declare
  2   l_spm_op pls_integer;
  3  begin
  4   for x in (select sql_handle from dba_sql_plan_baselines b where created >= trunc(sysdate))
  5   loop
  6       l_spm_op :=
  7       dbms_spm.drop_sql_plan_baseline(x.sql_handle);
  8   end loop;
  9  end;
 10  /

PL/SQL procedure successfully completed.

SQL>

So I expect that this is related to the DBMS_MVIEW and a restriction on recursive, internal instructions.

For example, if you capture base plan sql lines you don't capture baselines for sys and system statements, etc.

Further investigation required.

For example, we will build a MV:

SQL> create materialized view mv1
  2  build immediate
  3  refresh on demand
  4  as
  5  select /*+ domtest mv */ col1 from t1;

Materialized view created.

SQL> exec dbms_mview.refresh('MV1');

PL/SQL procedure successfully completed.

SQL>

We see two statements of the initial creation of the MV and the subsequent update (the latter is the one with the BYPASS_RECURSIVE_CHECK trick).

SQL> select sql_id
  2  ,      substr(sql_text,1,50) sql_text
  3  ,      child_number c
  4  ,      to_char(force_matching_signature) sig
  5  ,      sql_plan_baseline
  6  from   v$sql
  7  where  sql_text like 'INSERT %domtest%';

SQL_ID        SQL_TEXT                                C SIG                            SQL_PLAN_BASELINE
------------- ------------------------------ ---------- ------------------------------ -------------
ctyufr5b5yzfm INSERT INTO "RIMS"."MV1" selec          0 12798978218302414227
              t /*+ domtest mv */

gfa550uufmr34 INSERT /*+ BYPASS_RECURSIVE_CH          0 12927173360082366872
              ECK */ INTO "RIMS"."

SQL>

Even if we repeat the update, we do not need to obtain a reference level:

SQL> exec dbms_mview.refresh('MV1');

PL/SQL procedure successfully completed.

SQL> exec dbms_mview.refresh('MV1');

PL/SQL procedure successfully completed.

SQL> exec dbms_mview.refresh('MV1');

PL/SQL procedure successfully completed.

SQL> exec dbms_mview.refresh('MV1');

PL/SQL procedure successfully completed.

SQL> exec dbms_mview.refresh('MV1');

PL/SQL procedure successfully completed.

SQL> exec dbms_mview.refresh('MV1');

PL/SQL procedure successfully completed.

SQL> select sql_id
  2  ,      substr(sql_text,1,50) sql_text
  3  ,      child_number c
  4  ,      to_char(force_matching_signature) sig
  5  ,      sql_plan_baseline
  6  from   v$sql
  7  where  sql_text like 'INSERT %domtest%';

SQL_ID        SQL_TEXT                                C SIG                            SQL_PLAN_BASELINE
------------- ------------------------------ ---------- ------------------------------ -------------
ctyufr5b5yzfm INSERT INTO "RIMS"."MV1" selec          0 12798978218302414227
              t /*+ domtest mv */

gfa550uufmr34 INSERT /*+ BYPASS_RECURSIVE_CH          0 12927173360082366872
              ECK */ INTO "RIMS"."

SQL>

So... maybe BYPASS_RECURSIVE_CHECK have nothing to do with it?

It is not likely to be relevant, but maybe we should just check?

Let's see what happens if we return to our original plsql statement because we cannot insert a MV directly.

SQL> begin
  2   INSERT /*+ BYPASS_RECURSIVE_CHECK */ INTO t1 select 1 from dual;
  3  end;
  4  /

PL/SQL procedure successfully completed.

SQL> select sql_id
  2  ,      substr(sql_text,1,50) sql_text
  3  ,      child_number c
  4  --,      to_char(force_matching_signature) sig
  5  ,      sql_plan_baseline
  6  from   v$sql
  7  where  sql_text like 'INSERT /*+ BYPASS_RECURSIVE_CHECK */%';

SQL_ID        SQL_TEXT                                                    C SQL_PLAN_BASELINE
------------- -------------------------------------------------- ---------- ------------------------
6kjvr1gu6v2pq INSERT /*+ BYPASS_RECURSIVE_CHECK */ INTO T1 SELEC          0

SQL> begin
  2   INSERT /*+ BYPASS_RECURSIVE_CHECK */ INTO t1 select 1 from dual;
  3  end;
  4  /

PL/SQL procedure successfully completed.

SQL> select sql_id
  2  ,      substr(sql_text,1,50) sql_text
  3  ,      child_number c
  4  --,      to_char(force_matching_signature) sig
  5  ,      sql_plan_baseline
  6  from   v$sql
  7  where  sql_text like 'INSERT /*+ BYPASS_RECURSIVE_CHECK */%';

SQL_ID        SQL_TEXT                                                    C SQL_PLAN_BASELINE
------------- -------------------------------------------------- ---------- ------------------------
6kjvr1gu6v2pq INSERT /*+ BYPASS_RECURSIVE_CHECK */ INTO T1 SELEC          0

SQL> begin
  2   INSERT /*+ BYPASS_RECURSIVE_CHECK */ INTO t1 select 1 from dual;
  3  end;
  4  /

PL/SQL procedure successfully completed.

SQL> select sql_id
  2  ,      substr(sql_text,1,50) sql_text
  3  ,      child_number c
  4  --,      to_char(force_matching_signature) sig
  5  ,      sql_plan_baseline
  6  from   v$sql
  7  where  sql_text like 'INSERT /*+ BYPASS_RECURSIVE_CHECK */%';

SQL_ID        SQL_TEXT                                                    C SQL_PLAN_BASELINE
------------- -------------------------------------------------- ---------- ------------------------
6kjvr1gu6v2pq INSERT /*+ BYPASS_RECURSIVE_CHECK */ INTO T1 SELEC          0
6kjvr1gu6v2pq INSERT /*+ BYPASS_RECURSIVE_CHECK */ INTO T1 SELEC          1 SQL_PLAN_aq62u7rqdfcs8125daea2

SQL>

Yes, nothing to do with it.

I would say it is because running via DBMS_MVIEW, he is special and bypasses the review of basic data.

We can somehow get around this?
Perhaps, the basic lines of being a flexible vehicle that work off SIGNATURE (and PLAN_HASH_2).

We will check the hash of the signature and the plan must reproduce.

SQL> select sql_id
  2  ,      substr(sql_text,1,50) sql_text
  3  ,      child_number c
  4  ,      to_char(force_matching_signature) sig
  5  ,      sql_plan_baseline
  6  ,      plan_hash_value
  7  from   v$sql
  8  where  sql_text like 'INSERT %domtest%';

SQL_ID        SQL_TEXT                                C SIG                            SQL_PLAN_BASELINE
------------- ------------------------------ ---------- ------------------------------ -------------
PLAN_HASH_VALUE
---------------
ctyufr5b5yzfm INSERT INTO "RIMS"."MV1" selec          0 12798978218302414227
              t /*+ domtest mv */
     3617692013

gfa550uufmr34 INSERT /*+ BYPASS_RECURSIVE_CH          0 12927173360082366872
              ECK */ INTO "RIMS"."
     3617692013

SQL>

And replace the materialized by a table view:

SQL> drop materialized view mv1;

Materialized view dropped.

SQL> create table mv1
  2  (col1 number);

Table created.

SQL>

And try to get a statement with the same signature and plan that uses a reference database:

SQL> begin
  2   INSERT /*+ BYPASS_RECURSIVE_CHECK */ INTO "RIMS"."MV1" select /*+ domtest mv */ col1 from t1 ;

  3  end;
  4  /

PL/SQL procedure successfully completed.

SQL> select sql_id
  2  ,      substr(sql_text,1,50) sql_text
  3  ,      child_number c
  4  ,      to_char(force_matching_signature) sig
  5  ,      sql_plan_baseline
  6  ,      plan_hash_value
  7  from   v$sql
  8  where  sql_text like 'INSERT %domtest%';

SQL_ID        SQL_TEXT                                C SIG                            SQL_PLAN_BASELINE
------------- ------------------------------ ---------- ------------------------------ -------------
PLAN_HASH_VALUE
---------------
ctyufr5b5yzfm INSERT INTO "RIMS"."MV1" selec          0 12798978218302414227
              t /*+ domtest mv */
     3617692013

5n6auhnqpb258 INSERT /*+ BYPASS_RECURSIVE_CH          0 12927173360082366872           SQL_PLAN_b6tnbps6tn
              ECK */ INTO "RIMS".
     3617692013

gfa550uufmr34 INSERT /*+ BYPASS_RECURSIVE_CH          0 12927173360082366872
              ECK */ INTO "RIMS"."
     3617692013

SQL>

Now, if we remove and recreate the materialized view:

SQL> create materialized view mv1
  2  build immediate
  3  refresh on demand
  4  as
  5  select /*+ domtest mv */ col1 from t1;

Materialized view created.

SQL> exec dbms_mview.refresh('MV1');

PL/SQL procedure successfully completed.

SQL> select sql_id
  2  ,      substr(sql_text,1,50) sql_text
  3  ,      child_number c
  4  ,      to_char(force_matching_signature) sig
  5  ,      sql_plan_baseline
  6  ,      plan_hash_value
  7  from   v$sql
  8  where  sql_text like 'INSERT %domtest%';

SQL_ID        SQL_TEXT                                C SIG                            SQL_PLAN_BASELINE
------------- ------------------------------ ---------- ------------------------------ -------------
PLAN_HASH_VALUE
---------------
dac4d22mf0m6k INSERT INTO "RIMS"."MV1" selec          0 12798978218302414227
              t /*+ domtest mv */
     3617692013

cn4syqz9cxp3y INSERT /*+ BYPASS_RECURSIVE_CH          0 12927173360082366872           SQL_PLAN_b6tnbps6tn
              ECK */ INTO "RIMS"."
     3617692013

SQL>

And cleaning:

SQL> drop table t1;

Table dropped.

SQL> drop materialized view mv1;

Materialized view dropped.

SQL> declare
  2   l_spm_op pls_integer;
  3  begin
  4   for x in (select sql_handle from dba_sql_plan_baselines b where created >= trunc(sysdate))
  5   loop
  6       l_spm_op :=
  7       dbms_spm.drop_sql_plan_baseline(x.sql_handle);
  8   end loop;
  9  end;
 10  /

PL/SQL procedure successfully completed.

SQL>

Then...
Baselines are created for the sql statements executed in PLSQL? Yes.
Baselines are created for internal instructions of DBMS_MVIEW? N °
Why? Don't know. But I think that this is the expected behavior.
Is there a convoluted way to apply a basic strategy to the internal refresh statement? Yes.

Problems with the keyboard, typing the extra characters

Original title: Getting irritated by symbols

When I type a few symbols, such as the double rating mark("), single quote ('), apostrophe (') or CAP (^), these symbols will appear once I get home the next symbol or letter. For example, if I write 'Hello', first double quote appears after I enter the letter H, and the second citation appears after clicking on the comma. And how it works on all programs, where I can write (notebook, desktop, browsers, etc.). Is it possible to change this strange behavior? I am using Windows 7 Ultimate x 64 and wireless keyboard.

When I type a few symbols, such as the double rating mark("), single quote ('), apostrophe (') or CAP (^), these symbols will appear once I get home the next symbol or letter. For example, if I write 'Hello', first double quote appears after I enter the letter H, and the second citation appears after clicking on the comma. And how it works on all programs, where I can write (notebook, desktop, browsers, etc.). Is it possible to change this strange behavior? I am using Windows 7 Ultimate x 64 and wireless keyboard.

You use the software keyboard called "United States International." Go to control panel | Region and language and click the keyboards and languages tab. Then click on change keyboard and change in the United States.

problem with windows mail (using Vista) after automatic updates installed

After the installation of the automatic update of windows I can't receive or send email on windows Messaging. Get the box asking username and password and when I did, he asked again. Have checked all the settings and they are as before the problem started. Is there a problem of backward compatibility with one of the windows updates? I can access my email on the site, so is not their problem but with my computer.

Hello

Try the following methods:

Method 1:

Try to download and reinstall Windows Mail using the link:

http://support.Microsoft.com/kb/941090

In the link above, go to download and install the update.

Method 2:

Solve problems with Windows Mail

http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

Reference:

Working with Windows Mail in Windows Vista

http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

Problems with Windows 7: Internet Explorer and black screen

I recently took my old Acer Aspire laptop 8375 from the dead. If I remember correctly, it is from 2008 and has Windows 7 installed on it. When I try to start my PC, everything's fine until it connects to the account. Suddenly, a black screen will appear with a message saying: Internet Explorer has stopped working. I have tried different methods: looking for online solutions (did not work, window closed without results), open the Task Manager and IE (did not work), trying to open other applications didd work tho, but my google chrome didn, t work as well running. I forgot to mention, I could use my cursor on the black screen. Could someone help?

Hello Kent,

Thank you for your response.

I appreciate your time.

If the computer boots to the office, you can use the steps described in this article and check the problem with Internet Explore.
Reference:
What to do if Internet Explorer does not work
http://Windows.Microsoft.com/en-us/Internet-Explorer/IE-crashes-stops-working#IE=ie-11-win-7

Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

Please keep us updated.

Thank you

Problem with weakly typed ref Cursor
I have problem with a procedure in a package that returns a weakly typed reference cursor.
The cursor that is returned to give the desired result when connected as sys and sysdba.
But the user has rights of execution on the slider isn't a result.
If I run the query for the cursor as a user I get the desired result
I tried creating a new procedure outside of the package and it still doesn't work the way I want it.

I tested changing authentication none in sqlnet.ora and still no results

Procedure
create or replace procedure ReportUnits (in the SYS_REFCURSOR cResult)
AS
Start

Open the cResult for
Select distinct c.company, c.name, c.companycode
all_views o, fakta.balance_table b, fakta.company c
where b.company = c.company
and o.view_name like upper(b.company ||) '_' || b.balance_table | '_view %');

end ReportUnits;
Tried the two SYS_REFCURSOR and
Typedef t_cursor as ref cursor;

I get no error message.
802379 wrote:
Sorry user_views does not solve the problem using all user_views I get no result points of view because interested does not belong to the user.

So who owns the upper(b.company ||) '_' || b.balance_table | views of '_view' %)? And the package is created with copyrighted (by default) or with authid current_user? If the package is created with copyrighted, it still operates as package regardles of owner who runs it. Package owner (not the appellant) must have accsess to view granted directly, without going through role (rights define stored objects do honor no roles). And since rights define package runs as the owner of package, all_views will show views package owner has access, not package calling.

One last thing - what happens if more than one schema has upper(b.company ||) '_' || b.balance_table | views of '_view' %)? Do you want them or only in a specific schema?

SY.

My google search bar now lights up blue and I don't see what I'm typing. Why? I read somewhere that there is a problem with Firefox. Is there any solution for this?

I don't know exactly when it happened, but one day my search bar Google turned blue when I tried to kick it. I couldn't see what I was typing. I did some research and some forums that it was a problem with Firefox. Have you heard of this? Is there a solution for this?

Thank you for your help.

Which may be caused by protection of typing"Comcast constant guard.

'Configure the Anti-keylogger settings'-> disable
- [874709/questions/874709]
- [870165/questions/870165]

PROBLEM WITH PC TURNING ITSELF & TYPING ISSUES

Hello Im having 2 problems with windows vista

one is lately my pc comes on in the middle of the nite and begins to scan... How can I prevent the it turn on?

I looked into the power opt and not find something in there to change

My other problem is typing... I could be typing this and look and the cursor is elsewhere on the page, or the letters I hit are all boggled in the sentence

I wrote Microsoft earlier last year and eventually replace the vista. This work of not... I have a Dell laptop inspiron with this problem

Thanks for any help

Hello

(1) check the Task Scheduler to auto scan or a daily update of the antivirus and something similar programs. You must change the settings in the program not to wake the machine for this purpose.

(2) this is usually due to the user thumbpads brushing the touchpad while typing. Many laptops have an option to disable the touchpad. For others, it allows you to go to the applet to Panel control and mouse and on the device Options tab, select the touchpad and click settings and check the box hide the cursor when typing. For some, just be aware of how this happens is enough to avoid it.

Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.

Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.

Hi Chaz,

I thank you for your message and gives us a chance to help you. I see that the Mail app closes while you are typing an email.

Please answer these questions to get a better understanding of the issue.
1 have changes made to your computer before this problem?
2 shut down other applications while they are in use?
3. do you get an error code?

You can try these methods to check whether the problem is resolved.

Method 1: Run the troubleshooter of app.

http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

Open this link to launch the troubleshooter.

Method 2: Update the application.

Method 3: Reinstall the application.

This link has the steps that you can follow to update and reinstall the application.

http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

Feel free to use the forum for any other issue of Windows, you may have.

Hello, I had a problem with my band. It does not really suppose he numbered scenes everything in order and he has so far in until I missed an and changed for the good order. But now when I go back to where I left and I have create a new scene

Hello, I had a problem with my band. It does not really suppose he numbered scenes everything in order and he has so far in until I missed an and changed for the good order. But now when I go back to where I left and I have create a new scene number come up as * it and I need to change personally. is their any way I can change it to order normally?

Hello

You can manage this through the "Manage scene numbers" option in the menu 'Production '.

There is a setting in this dialog box to assign scene numbers automatically to the new scenes.

How do I monitor/find where is the State of my download? I don't know how long it takes or if there is a problem with the download that I can't find anything. Also, is it supposed to be an icon for my purchase of Photoshop and light in my apps folder

How do I monitor/find where is the State of my download? I don't know how long it takes or if there is a problem with the download that I can't find anything. Also, is it supposed to be an icon for my purchase of Photoshop and light in my apps folder? Where can I find that when it's done download?

Could you please confirm the operating system you are using.

You can see the status of the application of CC desktop download.

The CC app desktop click the creative cloud icon located in the taskbar (Windows) or the Apple bar (Mac OS) menu, to open the creative cloud desktop application.

Hope this will help you.

Kind regards

Hervé Khare

I tried to install LR 6 of the CD. After some problems with my Adobe ID, I typed in my serial number, then he told me... OS is not fullfill is the requirements.my OS Win 7 64 bit system. can someone help me with this?

I tried to install LR 6 of the CD. After some problems with my Adobe ID, I typed in my serial number, then he told me... OS is not fullfill is the requirements.my OS Win 7 64 bit system. can someone help me with this?

See the link below:

trying to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

How to create a strictly typed control refnum using LabVIEW scripts

I want to use LabVIEW to create a strictly typed refnum control that is bound to my custom control (a defined cluster), but I'm not familiar with scripts and can't see how to do it.

If I create a new object of VI, with Refnum of control as the Style, how can I give my custom class object VI control terminal? When I try to use a reference to my control.ctl file customized (using the Open VI reference) I get an error: 'error 1057 occurred... ". Type mismatch: object cannot be cast to the specified type. »

Alternatively, if I create a new Refnum of control as above, using a standard Cluster as the object of VI class, how I can convert this refnum control to a strictly typed refnum, which is related to my custom cluster control type?

Thanks in advance for any advice,

I tried, and as usual, things were slightly different. The big problem is that a constant control reference becomes a node, not a constant, so cannot be converted to a control. The good news is that you simply move to the front of the new control, as you would in the dev environment. Here is the raw code (always needs cleaning to close the refs and add save of the new control, and more, you don't need to show the FP control if you do not want).

Problems with supposed strictly typed reference...

Similar Questions

Maybe you are looking for