Problem with weakly typed ref Cursor

Similar Questions

• problem with keyboard typing slowly down

  Hi, I met an unexpected problem... .my problem is that my keyboard does not work properly when I pressed everything is not working... .but when I pressed them about it works... .i have nd of laptop compaq presario cq60116ee I have windows 7ultimate ussed but my screen is working properly on keyboard... (my keyboaard take a long time to type words)

  Hello!

  I suggest that you scan your computer with a good antivirus program. Also uninstall all unnecessary software, you may have. After that try pluggin in a USB keyboard and see if he type properly. If this is the case, download your checked keyboard.

  concerning

  Microsoft-Most-Valuable-Professional, blog at: http://www.thecomputernext.com

• Problems with Chapter cross refs in Indesign CC 2015 when you open a book in 2014?

  Can someone help me with this question, is there a quick fix all refs are now missing in the chapters of the book. I start a new book and will have to update manually, but that's a lot of unnecessary work I have a lot of books with chapters of reference.

  The best advice is probably to go back and finish the book in the version that you have started.

• While typing, the cursor goes all ways

  Original title: cursor problems

  When typing, the cursor goes in all directions. His frustration even because I'm at school and spend a lot of time typing documents.

  When typing, the cursor goes in all directions. His frustration even because I'm at school and spend a lot of time typing documents.

  Touchpad is too sensitive.
  When you type, you inadverdently touched the touchpad, so the moved cursor.
  Check the computer user documentation. Learn how to decrease the sensitivity of your touchpad. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Return of the ref cursor of procedure where the cursor is defined in the specification

  Hello
  
  Here's pseudo-code
  
  create or replace package test
  as
  cursor c_emp (number cv_emp_id)
  is
  Select emp_name emp where emp_id = cv_emp_id;
  
  type ref_c is ref cursor;
  
  function get_emp_name (number p_emp_id) return ref_c;
  end test;
  /
  
  
  create or replace the test physics package
  as
  ref_c function get_emp_name (number p_emp_id)
  is
  ret_val ref_c;
  Start
  Open c_emp (p_emp_id);
  ret_val: = c_emp;
  return ret_val;
  
  end get_emp_name;
  end test;
  /
  
  Returns me "PLS-00382: expression is of the wrong type. I tried to use a strongly typed Ref cursor based on the cursor, but nothing helped.
  
  Clearly, I understand something... and if I can't assign as ' ret_val: = c_emp "and if there is another key way it so please let me know.
  
  Thank you
  
  Ralph
  
  Published by: user13024707 on May 5, 2010 04:43

  user13024707 wrote:
  Clearly the point of my question is being missed.

  Or maybe the question is not been clearly asked. ;)

  I want to set the cursor in the PACKAGE SPECIFICATION, and not in the package body. The issue of the bind variable and the string is neither here nor there because I pass parameters to the cursor.

  What you ask is to use a PL/SQL cursor (defined in the specifications of the package or elsewhere) and that convert a Ref Cursor. N ° cannot be done.
  PL/SQL cursors should be used in the PL/SQL code. REF CURSOR is primary used to pass back a reference to a cursor (and all queries are cursors) to a layer of application outside of PL/SQL for example .net, java, etc.. Once you start using the ref Cursor only really, you have the choice of opening it based on a (dynamic) or a fixed query string as in the examples given. You cannot open a cursor of a PL/SQL cursor definition Ref.

  The difference is that when you do:

    CURSOR cur_mycursor IS
      SELECT ...
  

  you declare a cursor in pl/sql definition, not actually a slider itself. The cursor itself is created when you issue an OPENING or a statement FOR etc. So a Ref Cursor (reference to a slider) cannot refer to the definition of the cursor because it is only a definition, not a cursor (i.e. it has not been sent engine sql and instantiated at that time here). Instead the Ref Cursor must reference a cursor (query), itself, and that may be presented as a string or as the query itself that is issued against the sql engine and then the ref cursor points

  Thus, slider ref and PL/SQL cursors are different concepts, both designed to manage cursors in a slightly different way of programming. You cannot mix them.

• Problem with the huge movies.

  I made movies using the camera and created clips using sony vegas. The movies are about 5 minutes. I created intro and she integrated in flash (not progressive download, just embeded in the scenario, because I only am not parce que je ne suis pas cela cela create for www). So it works very well, I did skip the menu and function intro. So when you click on "Gallery" it's going to frame 'Gallery' where the movie is embeded. The problem is, that the player has an error, in my view, it stops in the middle of the film (it is not a problem of actionscript, I'm sure, because his film is played, but movie not). I really need help atm, please!

  OK, it's done. It was a problem with keyframes (typed gotoAndPlay [must STOP])

• PROBLEM WITH PC TURNING ITSELF & TYPING ISSUES

  Hello Im having 2 problems with windows vista

  one is lately my pc comes on in the middle of the nite and begins to scan... How can I prevent the it turn on?

  I looked into the power opt and not find something in there to change

  My other problem is typing... I could be typing this and look and the cursor is elsewhere on the page, or the letters I hit are all boggled in the sentence

  I wrote Microsoft earlier last year and eventually replace the vista. This work of not... I have a Dell laptop inspiron with this problem

  Thanks for any help

  Hello

  (1) check the Task Scheduler to auto scan or a daily update of the antivirus and something similar programs. You must change the settings in the program not to wake the machine for this purpose.

  (2) this is usually due to the user thumbpads brushing the touchpad while typing. Many laptops have an option to disable the touchpad. For others, it allows you to go to the applet to Panel control and mouse and on the device Options tab, select the touchpad and click settings and check the box hide the cursor when typing. For some, just be aware of how this happens is enough to avoid it.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• I have a problem with the cursor on the computer.

  Original title: How can I stop this? When I click on a window to make it active, he admits that as a real click click and move the cursor on the page. Windows 7 pro

  Windows 7 pro 6.1

  I do web development on several screens with multiple applications open at the same time.  When I want to use a program that is on my second monitor I click it to make it active.  This click has also acts as a true clicks and moves the cursor on the page.  This can be very annoying because whenever I want to spend the programs I mouse over a sidebar of this application or try to click exactly where my cursor is in the document.

  Looks like a trivial question, but through the course of a day it gets very boring very quickly.  I don't remember that it works this way in older versions of windows, and I hope that there is a way to fix it.  What I would like is the first click on an app just make active in order to quickly click the apllication anywhere and start typing there where I left.

  Hi Vanamp,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with the click of the mouse to activate a window.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.

  This problem occurs only with a particular application?

  This problem can occur if the mouse settings are poorly positioned.

  I suggest you try the procedure described in the article and see if it helps.

  Change the settings of the mouse
  http://Windows.Microsoft.com/is-is/Windows7/change-mouse-settings

  Check out the link for more information.

  Make the mouse easier to use
  http://Windows.Microsoft.com/en-in/Windows7/make-the-mouse-easier-to-use

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with the mouse settings, I'll be happy to help you. We, at tender Microsoft to excellence.

• I have a problem with the cursor jumps when entering text.

  Original title: cursor jumping when entering text

  I use Microsoft 7 and the cursor keeps jumping when I type. This causes the text to be misplaced. Some answers I've seen only direct you to the hardware options but never directly any specific solution. Grateful for ideas?

  Hey Joe,

  Thanks to join Microsoft Community where you will find all the required information on the Windows operating systems!

  The problem may occur due to the speed of the pointer mouse inappropriate or if the sensitivity of the touchpad is too high.

  To help you better, we need more information.

  What is brand and model computer?

  To work with the issue, I suggest you follow these steps:

  Method 1: Hardware store

   

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Update mouse drivers

   

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Method 3:

   

  Change the settings of the mouse pointer.

   

   

  Refer to section to change the mouse pointer works on the site:

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-in/Windows7/change-mouse-settings

  Method 4:

  If you use a laptop, change the sensitivity of the touchpad.

  See solving problems with your touchpad in more options in the site:

   

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

   

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• I have a problem with scrolling and typing on the computer.

  Original title: I have problems with scrolling and typinging after a minute or so without the computer trying to go in the background, any help would be great because I will to throw the mouse across the screen very soon

  as noted above, totally tired, I must right click of mouse to wake up on this page, I did it while typing grrrr big time. Help pleeeease

  Hello

  Thanks for posting your question in the Microsoft community.

  I see that you have a hard time to work with the mouse.

  1. What is the brand and model of the mouse?
  2. The problem occurs on any program or when you perform a task in a particular program?

  Try these steps and see if that solves the problem of performance of your mouse.

  Method 1:

  You can check that the mouse buttons are set correct.

  Refer to the section "Change how the mouse buttons works", from following link to learn more about the same:

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Method 2:

  You can uninstall and reinstall the drivers for the mouse on your computer, to do so follow the steps mentioned below.

  a. click Start, click Control Panel , and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. in the Device Manager, look for the device under the mouse and other pointing devicesand then double-click the device name.
  c. click on the Driver tab, and then click uninstall the driver.

  d. restart the computer and it will automatically re - install the drivers of.

  Note:

  You can also update mouse drivers by visiting the manufacturer's Web site.

  See this link for more information:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Let us know if you need help on this question or any question about Windows.

• Windows 7 laptop. I have problems with my cursor. When I type, it jumps and anywhere else except where I type moves.

  Hello:

  I am pleased to say that I have really only one problem left to solve.  I have a Dell Inspiron N5010 with Windows 7.  I started having this problem immediately about two or three weeks after the purchase of this computer.  I have problems with my cursor.  A Laptop store owner who corrects laptops told me ' you type you're probably hit a key that throws the slider out where you type and be aware of this.  I really don't think that.

  Is that the problem is that whenever I type just arbitrarily the cursor jump to other sections of my screen where I previously typed something.  It's very frustrating.  Can you really fix that because a tech support person told me that "which cannot really be fixed with someone to take control of your computer, or there is a problem with the keyboard".  That's what he says.  "It could be a problem with the keyboard" and he concluded that it might have to be taken in a store or (sent to DELL (and I say no, no, no (Amy Whinehouse)).)  A lot of smiles.

  But in any case this problem can be corrected as any other problem?  I hate it when this cursor jumps around on the screen to the typed sections previously.  It does not have it on my desk.

  Please let me know.

  Lavenderjade

  Hello

  1. the problem occurs with any particular application or all applications?
  2. don't you make changes to the computer before the show?

  Method 1
  The issue may be due to some third-party program conflicts. I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest that you try to reduce the sensitivity of the touchpad and check if that helps.

  a. turn on your computer and log in to Windows as usual. Open the "Start" menu and click on the "Control Panel" option.

  b. double-click the icon named "Mouse"... The "Mouse properties" window opens. Go to the tab "device settings". Click on the button "settings". A window titled "Properties" appears.

  c. examine the left panel of the 'Properties' window and expand the option "sensitivity." Click on the option "Sensitivity to touch."

  d. reduce tactile sensitivity in moving the slider to the right, to the label of "heavy touch. Experiment with different levels of sensitivity until find you one suited to your needs.

  e. click the 'OK' button to close the "Properties" window Repeat the operation with the control panel "mouse". Your new touchpad sensitivity settings are now saved.

  Method 3
  I suggest you to update the drivers for the touchpad on the manufacturers Web site.
  http://www.Dell.com/support/drivers/us/en/555

  More information
  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab04

• Need the difference between strong Ref Cursor and weak Ref Cursor examples

  Oracle 9.2
  
  It would be great if someone can help understand the differences between
  1 Strong Ref Cursors(return type)
  and
  2. weak Ref Cursor (no return type)
  
  What I read is weak ref Cursor as sys_refcursor is better to use the ref Cursor, because in the case of slider strong Ref object type that will be returned must be declared in advance. It dosent make sense to me?
  
  I start with the examples would be appreciate for advice
  
  Strong Ref Cursor
  
  create the package str_pack
  is
  type sref_type is ref cursor return emp % rowtype;
  SVAR sref_type;
  end str_pack;
  
  Create procedure st_proc (eid in number, c1 on str_pack.sref_type)
  is
  Start
  Open c1 to select empno, ename, sal from emp where empno = eid;
  end;
  
  declare
  str_pack.sref_type C1;
  type rec is RECORD (eid, ename varchar2 number (20), number of sal);
  SheikYerbouti rec;
  Start
  st_proc(10,C1);
  loop
  When exit c1% notfound;
  Fetch c1 into SheikYerbouti.
  end loop;
  Close c1;
  end;
  
  
  There could be errors in the above example but its basically to get a better understanding.
  
  For weak Ref Cursor
  
  procedure of the child
  
  Create procedure child_proc (in number, c1 on sys_refcursor eid)
  is
  Start
  Open c1 to select empno, ename, sal from emp where empno = eid;
  end;
  
  parent process
  
  Create procedure parent_proc (recnum varchar2)
  is
  p_retcur sys_refcursor;
  emp_row emp % rowtype;
  Start
  child_proc (eid, p_retcur);
  loop
  extract the p_retcur in emp_row;
  dbms_output.put_line(emp_row.empno ||) e '|| emp_row. Ename | "wins". emp_row. SAL);
  end loop;
  end parent_proc;
  
  Concerning
  @

  Hello

  the fundamental difference is to do with the compiling and linking of runtime type that occurs.

  The he should explain a lot more detail than I could ever!
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:1640161160708

  P;

• Problem with cursor - will switch to a link

  I was hoping that someone could help with this.

  My dad's Mac has a problem with the cursor. It uses the trackpad and when you try to click on a link, it will not work. The arrow does not change into a symbol of the 'hand' and it can not click on it. This makes it almost impossible to navigate. It seems that the links are not recognized. He tried to use a mouse via the USB port and nothing changes.

  He tried to update to El Captain but he can't because the mouse doesn't work. The simple, restart or turn off / suite does not work. The problem persists on Chrome and Safari.

  Any help appreciated, thanks.

  Hi Irbea,

  Thank you for using communities of Apple Support. I see that you are the dad had problems with clicking on the links on his MacBook. These are some great troubleshooting steps to try to solve this problem. I am happy using.

  According to the steps that he has already done, I'll try to test this in safe mode. This will allow his MacBook making some changes and prevent the loading of the software. Please follow these steps to safe mode:

  Try safe mode if your Mac does not end commissioning

  While you are in safe mode, you may notice that the MacBook is running slower or the screen flashes.  No worries, it's normal.  Read this article for more information about this:

  Graphics performance limited in recovery of OS X or in safe mode

  If you continue to have problems trying to test in a new user:

  How to test a question in another account on your Mac.

  Have a great day!

• Since the installation of Mac Mavericks all my friends with Macs and I have problems with the cursor disappears, that in Firefox, Safari is very good...

  I stopped using Firefox as nothing I've done has corrected this problem. I tried to close Firefox and restart it, I erased all my Add-ons and then added adblock back (it's the only one), but it still does not work. I deleted files so that I have more space - I can't think of anything that works. I talked to four of my friends with Macs and they are all having the same problem with Firefox since the Mavericks.

  Cursor disappears huh? It's quite strange. All of the compatibility of the Mavericks can be followed in [Bug 883824]

  Try this work around:

  1. Go to Firefox > Preferences > advanced > general
  2. Always check "use the cursor keys to navigate through the pages.
  3. Press OK.

  Or try the Mac preferences noted here: https://discussions.apple.com/message/23542890#24471966

• My google search bar now lights up blue and I don't see what I'm typing. Why? I read somewhere that there is a problem with Firefox. Is there any solution for this?

  I don't know exactly when it happened, but one day my search bar Google turned blue when I tried to kick it. I couldn't see what I was typing. I did some research and some forums that it was a problem with Firefox. Have you heard of this? Is there a solution for this?

  Thank you for your help.

  Which may be caused by protection of typing"Comcast constant guard.
  
  'Configure the Anti-keylogger settings'-> disable

  • [874709/questions/874709]
  • [870165/questions/870165]