Photosmart 5515: printing of the black bands with letters between them

Similar Questions

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• My Dell Vostro 1310 won't start. I turn it on and the black screen with the Dell logo appears and nothing more

  It was working fine and accidentally my phone fell on the keyboard and the computer froze. There was a part of the image of what was on the screen before that happened and blue and red lines/markings or whatever it is. I unplugged and took out the battery. When I turned on it again, the black screen with the Dell logo comes up and just stays there. What should I do?

  Hello

  If under warranty contact Dell

  http://support.Dell.com/

  or ask in the forums Support of Dell

  http://en.community.Dell.com/support-forums/default.aspx

  If it is under warranty, contact a reputable repairman, local computer

• How can I add HP Photosmart C6380 printer in the HP Solution Center?

  For some reason, the HP Photosmart C6380 all-in-One printer has disappeared since the HP Solution Center, if I can do is no longer any proper alignment, cleaning, etc. How can I add the HP Photosmart C6380 printer in the HP Solution Center?

  Thank you.

  Disconnect the printer, uninstall the HP software through programs & features, reboot, then install HP full feature software for HP, specific to your version of bit of victory and linking only when prompted

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=3560280#n193

• What do all the Green icons with k in them?

  What do all the Green icons with k in them?  They accompany all hypelinks.

  Using Kaspersky?  If so it looks like it's maybe the Kaspersky URL Advisor: http://support.kaspersky.com/kis2012/settings/webav?qid=208284331

• I have Photoshop installed on my desktop and laptop. The photo folders are synchronized between them, but I don't mean to maintain synchronized so catelogs. What folders/files I need to copy to keep items Organizer catelogs and keywords, the t

  I have Photoshop elements 14 installed on my desktop and laptop. The photo folders are synchronized between them, but I don't mean to keep synchronized and catalogs. What folders/files I need to copy to keep organizing items catalogs and keywords, tags, synchronized on the laptop and the face recognition Office?

  oliverk3402531 wrote:

  I have Photoshop elements 14 installed on my desktop and laptop. The photo folders are synchronized between them, but I don't mean to keep synchronized and catalogs. What folders/files I need to copy to keep organizing items catalogs and keywords, tags, synchronized on the laptop and the face recognition Office?

  Looking for the location of your catalog in the menu help > system information. It's all the folder containing the database file catalog.pse14db.

  It's easy to synchronize your catalog...

  But...

  Even if the media folder tree has the same structure, which does not work and all your files will be displayed as "offline" in the catalog synchronized. The reason is that the catalogue in computer stores the location of the media files by the full path AND the identification of the drive (internal serial number). The synchronized catalog will not find files on computer B.

  So, what would be your choice?

  -Store your multimedia files on an external drive and plug it alternately on both computers. No need to synchronize media files; You can even save the catalog on the external drive, no need to synchronize the catalog folder either. Downside: who does not act as a backup. You can use your sync as a simple backup to restore in the drive of origin if necessary.

  -According to John R Ellis, you can assign the same serial number for both drives.

  psedbtool (database of the elements of Photoshop tool)

  I have not tested this, but it should work.

  -The good old method of backup and restore, forgetting the 'sync' is slow, but much more secure (you have two copies over a backup). The HUGE advantage is that you can easily migrate to another computer and still another version of elements, even another OS.

  -My own solution requires some fiddling with the sqlite database and a good understanding of the structure of the database. I have syncs media and catalog or via Synctoy Windows files on an external drive. I create a copy of the catalog I have change in sqlite to point to the serial number of the external drive. The catalogue of the external drive and media are available to any computer with the same version of elements. The advantage of the 'synctoy' method is that it is much easier and faster than an incremental backup in the Organizer.

• Photosmart 6520 print not in black after I installed the new cartridge.

  I just replaced the black cartridge in a Photosmart 6520, and it will not print in black. Color cartridges print very well.

  Appreciate any help.

  Thank you

  Summer2

  Thanks to YouTube, I have set the printer. The screen under the black cartridge has been blocked. He just needs cleaning.

• Printer HP Photosmart more B210 loses the wireless connection. with MAC 10.6 and Linksys router.

  From time to time my printer HP PSt + B210 indicates not 'online' in the window of the printer utility and do not print.

  I have spend hours to review what I did in th past and become confused.

  Should I start with the HP utility and make sure that my printer is listed only once in the queue (as is sometimes show 2 forms - for the same printer) OR should I stop MAC PB > router > Modem and then restart in correct, reverse order?

  Given that I need to choose "IP automatically...". ", I used Safari and put the 192.168.1.1 in the address bar and follow these steps, as already suggested.  What would be the clear measures to reconnect my HP printer status online? Thank you very much!!

  We will set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.
  
  After that, you will have to redo 'Add printer' using the new IP address.

• Intuit quicken does not print the black font with Windows 8.1

  When I print the reports from Quicken 2008 on my HP 4500 Wireless printer, only major titles that have shadows and text print.  (the red numbers can also print in red).  Reports printing OK on another printer. This issue was raised only since I changed my computer and operating system went from Vista to Windows 8.1.

  Other assignments you suggest to download another driver, but is there other drivers that are compatible with 8.1?

  Hi Toronto61,

  Thank you for your answer!

  Certainly there is software and drivers available, located on this Web site. Driver and software of HP Officejet full feature.

  Before installing I would recommend to uninstall snack, there are still old software on the computer. Uninstalling the printer software.

  Then I would clean the computer starts. How to perform a boot in Windowsand to use the printer HP install wizard for Windows. If the printer HP install wizard for Windows does not then download software driver full of features with the first link I provided.

  I hope this helps!

• HP Photosmart 3310: Using only the black cartridge

  Suffice it for the most part to print text in black, but it seems to exhaust all my color at a speed that is ridiculous and expensive cartridges.  How can I use the black cartridge only?  I use an iMac and iPad (for remote printing)

  Hi @Cambridge29,

  I see that you would like to know how to print with just the black cartridge, save the color for color printing cartridges.
  I would like to help.

  I understand your frustration, I don't really. However, this printer uses same color inks when printing in black only. If run out you of color and kept black printing only, you provoquerez problems with the print head. It is the the user guide for your printer, refer to page 148. Series of all-in-one Photosmart HP 3300

  You can have a setting in the print driver to print in grayscale, which uses fewer colors.

  Application, go to file, print to display the print screen. Here is a screenshot where to access the settings of the print screen driver. Then you can save the setting as a preset.

  

  What operating system do you use? Mac OS X: how to find which Mac OS X Version is on my computer?

  If there is anything else I can help you, let me know.

  Good day!
  Thank you.

• My photosmart c309a print or copy black ink. I replaced new w ink but still does not

  I have a mac.  My photosmart 309 c has suddenly will not print or copy of black ink.  I cleaned the print heads, tried to align (not that), went out & soak the cartridge printing and eventually replaced w / new black ink.  Still nothing!  When I print, I get a black ink when I try to align, but nothing.  Color will print.  Same problem when I try to copy - no black but will get color.  What should I do?

  I finally had time today to try the method of back.  It worked!

  I took out the print head, continually ran hot water into the Pan so that the water has never been dirty (about 1 inch of water), has run a small flow of water in the black on the top screen that I determined that I had nothing to lose, gently dried the electrical parts and put it immediately into.  Turned on the printer, he crossed the alignment, etc. and printed black (and colors).  Just copied too dark.  It took me about 10-15 minutes for the whole process.

  Hope this works for others.  Thank you all for the input.

• HP photosmart 5520 print do not correctly even with new ink

  I replaced the ink of color and black ink (364 cartridges). I have no error message or anything of what I see wrong. It is a wireless printer and when I print it always printed as ink cartridges are empty. Especially the black, when you're printing is a pinkish color. I took the cartridges and replace them in numerous amounts of times, and it seems to always print the same way. I don't know how to check the printer heads to see if it is causing the problem.

  Hello Daniellehenshaw,

  I'm sorry to hear that you are experiencing printing problems. I found the following troubleshooting steps for the e-all-in-one printer HP Photosmart 5220 which may help.

  http://support.HP.com/us-en/document/c03955472

  Please note that you have already completed the first few solutions suggested by replacing your cartridges and putting back them in place.

  I hope that one of the other suggested solutions work for you.

  Kind regards

  Lynn_B

• I have a HP Photosmart C8180 printer on the printer screen it displays C2FF8575.

  I have a HP Photosmart C8180 printer.  On the printer screen, it displays C2FF8575.  It won't turn off, unless I unplug islet that my Undo button keeps flashing. What does all this mean?

  The code of C2FF8575 refers to a fatal mistake in the firmware of the printer. The only thing you can do when this error is a hard reset. I will include the instructions below. If this does not work, you will need to replace the printer. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:
  http://goo.GL/w7Hgh

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• Photosmart B110e: Photosmart B110e print only in black after reset

  Because one of the rolls were filled with black color and then influenced the paper with the black dye, I decided to disassemble the machine to the roller cleaning and cleaning mechanism on the right side. Now black print is ok, but cyan, magenta and yellow was very low. I tried to clean the printheads several times, but apart from that I have spent a lot of ink, it has changed nothing.

  Since I'm sure that the machine's physical in order, I thought that the whole system may have to be reset. Here I could have made a big mistake. I chose to do a total of redefinition and now color cartridges apparently not activated.

  There are brand new original HP cartridges in the machine, but I confess that I sometimes used without originality. The problem with discoloration of the paper began, when using non original cartridges. Them I'm not going to spend more, but I would like to have the colors in return.

  What should I do when I have more cartridges that accompanies when I bought the machine?

  Hi @jlund6,

  You may need a full set of cartridges of installation, or a new printhead. In my view, that a new printhead comes with cartridges installation, but honestly, if I were in your position, I would consider a newer printer. If you call us, we may be able to offer a discount on a newer model. What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/

• I can't get my HP 7250 by default printing preferences stay black only with my XP computer

  I can't get my HP 7250 by default printing preferences stay black only for my XP computer, works fine on my Vista laptop. I click on apply and when I exit and return in passing parameters back to color.

  I reload the driver software of the printer with the latest version and it fixes the problem.