Problems with the cursor when you type

Similar Questions

• Problem with the resolution when you connect to a projector

  I regularly used my laptop connected to a projector via a cable VGA for PowerPoint and video clips view in Windows Media Player.   It is automatically detected and adjusted for different sizes of screen of the laptop screen (1366 x 768) and projector (1024 x 768) and projected with success.   Recently I connected the laptop to a second monitor - also 1024 x 768 - instead, and even once, it fits perfectly.

  It suddenly stopped setting for the resolution of the projector; When I go to the resolution of the screen, the option to set the resolution of the second screen is grayed out.   No matter if I use extend or duplicate, he insists that the two screens are 1366 x 768.   This has happened with two projectors, all two used to work properly.   I also tried different VGA cables.  The end result is that the image of the projector is hurry to tray.

  I can connect fine to the second monitor via the VGA port and sometimes with different resolutions for both screens.   I can also connect to a TV via an HDMI cable.   I can't try a HDMI cable for the spotlight as it is ceiling mounted, and the other is old and is not an HDMI connection.

  I checked the drivers and they seem to be up to date.

  My laptop is a Dell Latitude running Windows 7.   The graphics card is an Intel HD Graphics 3000.   I tried many suggestions already given on these forums without success.   The real puzzle is that it was working fine and nothing I can draw has changed except that I connected on the other monitor.

  Hi Tony,.

  Thanks for the reply with the status of the issue. I'm sorry to know that the issue is still unresolved, your efforts to solve this problem are much appreciated.

  I suggest to follow the method below and check if that helps:

  Method 1: Perform a system restore.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  System restore WARNING: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 2: Uninstall all hidden devices:

  Step 1: See the article below to activate the devices hidden in Device Manager.

  Look at a hidden devices

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  Step 2: After you enable hidden devices, remove devices from Device Manager.

  1. press start.

  2. type device manager in the start search box.

  3. Select Device Manager in the search result.

  4 uninstall everything that are grey also uninstall the drivers to display completely.
  5 restart the computer and install the drivers to view the manufacturer's Web site.

  Hope this information helps, just reply to the State of the question to get help.

  Hi Rizwan

  Unfortunately, I do not have a restore point old enough until the problem occurred.   I have not found any that was relevant in hidden devices, but in normal Device Manager mode when I clicked on "monitor" it opened a "Generic PnP" entry even when there was no extra monitor or projector fixed.   When an additional monitor has been attached, there were two of these entries.   I disabled them both, and I found that I can now adjust the resolution of a second monitor to a different setting of the laptop screen.

  Thanks for your help.

  Tony

• Problem with the date when you load the XML file into Oracle Database 10g

  Hi all
  
  I have the interface as shown in the screenshot below. In this document, among other things, I am mapping to an element XML file representing a date to an Oracle table column defined as DATE. The source and target columns are highlighted in the screenshot.
  
  ! http://img223.imageshack.us/img223/1565/odiscr275.jpg!
  
  When I run the interface, I get the following error message:
  
  java.lang.IllegalArgumentException to java.sql.Date.valueOf(Date.java:103)
  
  I guess that this is the conversion of the date!
  
  I already tried to replace SRC_TRADES. DEAL_DATE with TO_DATE (SRC_TRADES. DEAL_DATE, ' DD/MM/YYYY') on the implementation tab. This feature was not recognized when I executed the interface, so it did not work! The value of date in the XML file is in the format DD/MM/YYYY .
  
  I guess that Date SQL Oracle functions do not work in the implementation tab. Could someone let me know:
  
  1. what the Date Conversion function I could use instead?
  2. where can I find a reference to the methods/functions that I use in the implementation tab (if such a reference exists)?
  
  See you soon.
  
  James

  Hello.

  Try changing the area of execution at the staging area. Once you change it, write in the map box just SRC_TRADERS. DEAL_DATE. When you use TO_DATE, the source field typu should be varchar2, no date (as it is in store for your data source)

• I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I do: when I am uncomfortable with the laptop I save the files on the laptop, then on my external hard drive. Then, when I'm at work, I opened the drive, but the Muse says every time, that so many links in the 'active' is missing. And it takes a lot of time to get all the missing link. Like today I had to open a file of Muse from the external hard drive, and there are about 100 links that are missing.

  How can I solve this problem

  the best thing if you are a user of creative cloud is to store the files in a folder in your account of cloud instead of transferring the files from one computer to another.

  If you are not a Subscriber cc then Dropbox or iCloud will work as well.

• How can I disable the voice when you type with iOS 10.0.1

  How can I disable the voice when you type using iOS 10.0.1?

  GO to settings - general - accessibility-speech - Feedback-turnoff typo Word...

• problem with the CURSOR and WITH clause

  Hi guys,.
  
  I have never created a package before. I try to run it, but I get:
  ORA-06550: line 8, column 16:
  PLS-00382: expression is of the wrong type
  ORA-06550: line 8, column 3:
  PL/SQL: Statement ignored
  
  I know that my problem is in the next section
  
  OPEN FOR V_io_cursor
  
  with GOT_R_NUM like)
  
  
  Is the above correct?
  
  When I copy paste the "heart" of the query, it works very well. I really have a problem with the CURSOR and the declaration.
  
  Here's the code in its entirety. I know that the code is much more then he returned, but ignore this overload that was to do some tests to make sure that I can achieve any query request.
  
  CREATE OR REPLACE
  PKG_SPF_NATIONALREPORTS PACKAGE BODY IS
  
  PROCEDURE GET_NATIONAL_TOTAL_RESULTS (P_SelectFields IN varchar2, P_SUMFields IN varchar2, io_cursor IN OUT C_RESULTS)
  IS
  v_io_cursor C_RESULTS;
  
  BEGIN
  
  OPEN FOR V_io_cursor
  
  with GOT_R_NUM like)
  SELECT
  -START P_SelectFields
  r.cli_served,
  r.EIER,
  -END P_SelectFields
  r.RC,
  r.Year_ID,
  r.period_id,
  r.agreement_type_ind,
  CONTRACT_NUMBER. CONTRACT_NUMBER_TEXT,
  YEARS.year_desc,
  RC_CODE.rc_code_id,
  RC_CODE.rc_code,
  AHRDA HOLDERS. AHRDA_ID,
  AHRDA HOLDERS. REGION_ID,
  AHRDA HOLDERS. PROVINCE_ID,
  AGREEMENT_TYPE. AGREEMENT_TYPE_ID,
  AGREEMENT_TYPE. AGREEMENT_TYPE_DESC_EN,
  ROW_NUMBER() over (partition R.YEAR_ID, R.CONTRACT_Number_Text
  order by
  P.PERIOD_desc
  (/ / DESC NULLS LAST) AS r_num
  RESULT r
  JOIN period p ON r.period_id = p.period_id
  JOIN CONTRACT_NUMBER ON r.contract_number_text = CONTRACT_NUMBER. CONTRACT_NUMBER_TEXT
  JOIN RC_CODE ON contract_number.rc_code_id = rc_code.rc_code_id
  JOIN AHRDA holders ON ahrda.ahrda_id = rc_code.ahrda_id
  JOIN AGREEMENT_TYPE WE AHRDAS. AGREEMENT_TYPE_ID = AGREEMENT_TYPE. AGREEMENT_TYPE_id
  JOIN the YEARS WE r.year_id = YEARS.year_id
  )
  SELECT year_desc
  -START P_SUMFields
  SUM (cli_served) AS sum_cli_served
  The SUM (eier) AS sum_eier
  -END P_SUMFields
  OF got_r_num
  GROUP BY year_desc
  ORDER BY year_desc
  ;
  
  io_cursor: = v_io_cursor;
  
  END GET_NATIONAL_TOTAL_RESULTS;

  Agree - all this talk of loops FOR is completely irrelvant.
  A refcursor is usually the exact mechanism to return a result set.

  What is C_RESULTS?

  Just use SYS_REFCURSOR.

  No need for local variable.

  OUT why? Not just walk OUT?

  PROCEDURE GET_NATIONAL_TOTAL_RESULTS
  (P_SelectFields IN varchar2, P_SUMFields IN varchar2, io_cursor OUT SYS_REFCURSOR)
  IS
  BEGIN
   OPEN io_cursor FOR ...
  END;
  

• my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.

• I just picked up a 12 inch I have pad PRO and bought a keyboard provided by Apple, however I find that the base remains unstable and keeps the hustle when you type, the seller it says it's a design flaw. Can someone tell me if this is the case?

  I just picked up a 12 inch I have pad PRO and bought a keyboard provided by Apple, however I find that the base remains unstable and keeps the hustle when you type, the seller it says it's a design flaw. Can someone tell me if this is the case?

  find it hard to imagine that Apple could sell these defective products.

  If the seller is an authorized Apple reseller, an independent company,

  You may need to ask you if you could see & try a different product sample

  because you might be looking at something that has a defect.

  {According to the related help page, Type position should be more

  stable to use. However if the keyboard is not flat, this sounds like default.}

  Sounds as if you're not at the official Apple Store (apple retailer)

  but, on the contrary, are somewhere else. Could you give more information?

  Some keyboard accessories are made by third party companies; so

  If the product has an Apple product model number, we note here.

  When considering the purchase of an accessory, it's a good idea to test

  and check in the store before you buy. An official Apple Store has

  a different return policy as an independent reseller of Apple.

  Don't know if I can be useful; These chat rooms are usually Apple

  users of products such as yourself, who have taken their unpaid time

  to see if they can help the other users of the product.

  Good luck...!

• Hey I have a problem with the library, when I try to enable the creative cloud desktop application it keeps saying "cannot restore the file: C/users/USER name as the location of the file is not available."

  

  This is a double post of a following:

  Hey I have a problem with the library, when I try to enable the creative cloud desktop application it keeps saying "cannot restore the file: C/users/USER name as the location of the file is not available."

• I have problems with the cursor jumping around when I type, especially on facebook.

  When I type, the cursor jumps around. Most of the time he'll be back in the part I typed before. And for some reason, he does it almost everytime I type in the word you. I have run virus scans and she always does. Any suggestions?

  By chance, your computer is a laptop or netbook?
  I found that when typing, my wrist is sometimes contact with the touchpad causing the cursor to jump on.  Something specific on how you type 'you' might make your wrist touch the touchpad.  If this is your case, there is a program called 'touchfreeze' which disables the touchpad while you type.

  TouchFreeze: <> http://code.google.com/p/touchfreeze/ >
  Article: <> http://www.pcworld.com/downloads/file/fid, 83501/description.html >

  HTH,
  JW

• Cursor jumps to another part of the page or the screen when you type

  Hello

  When you type on the keyboard of my laptop cursor will go to a random part of the page or the screen and keep tapping on what I already typed.

  I had this problem with a Dell Inspiron, and they provided a patch with has been for the Bios or the touchpad.

  Is this a common fault with the Toshiba. I've seen some messages referring to disable the touchpad. However I don't think that this is a solution to the problem and Toshiba should provide a fix.

  Does not at any time have my finger on the touchpad while I was seized.

  Hope that answers.

  Huw.

  Hello

  As Christopher said use FN + F9 key combination to disable the touchpad. If the problem persists you should contact the Service partner. I'm sure they have more experience with it.

  I use two models of laptops different and same happen to me. Not often, but sometimes.

• I use win 7 and the cursor jumps all over the page when you type

  When you type using windows 7 I find that the cursor jumps around

  It also also increases that you typed!

  Would appreciate, if possible, a simple fix step by step if there is a.

  Juice now this msg has lost about 2 sentences? and I don't know where they are! ??

  Hello

  Laptop?

  Check with the manufacturer of system support, documentation in line, or forums as there
  probably are shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with)
  Entries of TouchPad) and some have a utility that loads in the Notification area near clock on
  at the bottom right. There "may" be the sensitivity settings.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work) try to update
  the driver for the TouchPad.

  Panel of configuration-Device Manager - mice and pointing devices - Double click on touch pad
  -Pilot Tab - click on Update Driver (which is may not make anything like MS is far behind certifying)
  (drivers), now right CLICK on the touchpad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in).
  RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad
  of work.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear
  the device if it is present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  =================================

  This utility also allows to control the TouchPad:

  TouchFreeze
  http://code.Google.com/p/TouchFreeze/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I solve very slow scrolling with the mouse when you press the command key? (MacBook Pro, Lion, no problem when using trackpad, no problem with other web browsers, other mice have the same problem)

  Scrolling speed is fine, but when you press the command key and then it becomes very slow.

  He does it with a mouse, but not with the trackpad.
  It does when the modules are disabled.
  No problem on Safari or Chrome.
  No problem on PC.

  I think it all started when I went form a MacBook with Snow Leopard on a MacBook Pro with Lion.

  Any help would be much appreciated.

  Thanks in advance!

  You use the mouse wheel to scroll?

  There are some prefs mousewheel, which control the behavior when you press the modifier keys.
  
  You can set the key to the action of each to 0 for normal scroll.

  See http://kb.mozillazine.org/About:config_entries #Mousewheel.

• Problems of blackBerry Smartphones when you type text messages

  for several months now my cursor was jumping about all over the place when I type a text message.  It also random symbols as if I was using the sym key which I was not. Cursor may jump up to a received message, to smiley or anywhere in typed message.  I adjusted the ball tracks, performed diagnostic tests and is reset by removing battery when turned on without result.  phone is clean and never got wet. At whits end? Someone else had this problem?

  Hello and welcome to the community!

  If you are certain that there is no intrusion of humidity of 100% (honestly, what you describe seems decidedly like that... but still), so I recommend that you try to start safe mode:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, thinking... what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  Good luck and let us know!

• I have a problem with the cursor on the computer.

  Original title: How can I stop this? When I click on a window to make it active, he admits that as a real click click and move the cursor on the page. Windows 7 pro

  Windows 7 pro 6.1

  I do web development on several screens with multiple applications open at the same time.  When I want to use a program that is on my second monitor I click it to make it active.  This click has also acts as a true clicks and moves the cursor on the page.  This can be very annoying because whenever I want to spend the programs I mouse over a sidebar of this application or try to click exactly where my cursor is in the document.

  Looks like a trivial question, but through the course of a day it gets very boring very quickly.  I don't remember that it works this way in older versions of windows, and I hope that there is a way to fix it.  What I would like is the first click on an app just make active in order to quickly click the apllication anywhere and start typing there where I left.

  Hi Vanamp,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with the click of the mouse to activate a window.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.

  This problem occurs only with a particular application?

  This problem can occur if the mouse settings are poorly positioned.

  I suggest you try the procedure described in the article and see if it helps.

  Change the settings of the mouse
  http://Windows.Microsoft.com/is-is/Windows7/change-mouse-settings

  Check out the link for more information.

  Make the mouse easier to use
  http://Windows.Microsoft.com/en-in/Windows7/make-the-mouse-easier-to-use

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with the mouse settings, I'll be happy to help you. We, at tender Microsoft to excellence.