Problem with the Satellite C855-2EU for departure

Similar Questions

• Problem with the Satellite Pro 2100 and new modules of RAM

  Hello

  I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
  My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
  Here is the code of the modules:
  KTT3614/256 (original)
  KVR266X64SC25/256
  256 MB pc2100 both.
  Starting the PC with any of them, as well as the modules are both compatible.

  Any ideas?
  (Sorry for my English but I'm Italian: D)

  Post edited by: DaK_TaLeS

  Hello

  the second location of memory perhaps is the problem.
  Try to start with a module in the second slot, first an empty slot.

  Good bye

• HP pavilion dv6-2150us: problems with the upgrade of processor for an i7-720qm on a hp pavilion dv6-2150us

  Hi all

  My friend recently bought an i7-720qm processor used to upgrade hp pavilion dv6 2 1 5 0 US and I

  summer giving a helping hand by making the upgrade.

  Since the 10 Windows running Google Chrome used up to 70% of the processing of an i3 - 330 m power

  processor, it seemed to be good upgrade to improve the performance of the laptop.

  We checked that the new i7 processor is compatible with the laptop (it is listed as supported by the)

  ( interview guide , page 108), and the seller assured us he tested the CPU on some different

  HP pavilion and it worked fine.

  But when I replaced the processor with the i7 processor i3 and tried to boot up the laptop, only the LED lights

  on the front and the setting of the power and volume buttons would light up periodically. The screen was black

  All the time.

  Thinking I might have made a mistake during the reassembly of the laptop I put the original i3 processor back in

  and it starts fine.

  I updated the BIOS of the F.1C version I found on the internet and once replaced the i3 with the i7 with the

  same results - display off, flashes periodically LEDs. The BIOS updated smoothly, and the correct version is displayed in the main menu of the BIOS.

  I am confused on what could be the problem with the upgrade, everything should work. Is there a BIOS update I have

  missed, or the problem elsewhere?

  Disassembly and reassembly are made with care, and we took care to avoid static electricity. All the rest

  on the laptop works well - I am writing this post on the laptop in question with the original i3 processor in place.

  Any help, advice or general guidelines as to what should be done would be really appreciated.

  Thank you for your attention.

  Hello:

  The problem is that if you look in Chapter 3 of the manual, pp 22-23, there are maps of separate used for the dual core and quad core processors system.

  In other words, you cannot install a quad core processor in a Board that originally had a dual core processor and vice versa.

• Problems with the removal of password for stsrting upward

  problems with the removal of password

  Hello

  We can not help you with passwords in BIOS.

  You will need to contact the manufacturer.

  @@@@@@@@@@@@@@@@@@@@

  If it is the password of the user account, read this:

  "How to delete or change a password for a user account in Vista"

  http://www.Vistax64.com/tutorials/101986-user-account-remove-password.html

  See you soon.

• Dependency problem with the new Blackberry Plugin for Eclipse

  I just encountered a problem with the new version of the JDE Eclipse Plugin. I set up my application project so that it uses two other projects such as libraries. Both of these projects are on the way to build Java in the settings of the application project, and the manufacturer Eclipse compiles without errors.

  But when I try to run on the Simulator, the application loader throws an Exception stating that it could not find one of the classes listed in library projects. Since it is the importation of first class in the main class, I guess that it was unable to find the entire library.

  I tried to have the application project to import the project two library, but nothing alx files has changed.

  In the old version of the Plugin, there is a property of the project "Blackberry project dependencies" or something like that, which should be set for library and rapc.exe projects and the simulator would be their. That went away, and I was told during Devcon now suffice to add libraries to the classpath. Apparently, this is not so for me.

  Can you give me an indication of what goes wrong?

  The problem seems to be that I imported my projects since the previous version of Eclipse plug-ins, Blackberry. I have now created a new workspace and new projects, completely maintaining the source files, and it works.

• Problem with the trial of InDesign for Mac

  Hello! I have problems with the InDesign trial download to my Macbook pro. This works on my macbook air to friends, but now on my computer. What can I do?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• Problems with the generator of Folio for CS5 (Mac)

  Hello

  I run Adobe CS5 Suite. I am currently developing an iPad app and run into a problem with the generator of folio. Previously, this computer doesn't have a generator all of folio. I followed the instructions on adobe.com and downloaded and installed the update producer folio tools (http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5433 & starts = 5435) and then downloaded and installed the updated folio builder Panel (http://www.adobe.com/support/downloads/product.jsp?product=180 & platform = Macintosh). When I open inDesign, generator of folio is still saying "an update Is had to use Folio Builder."  "Please click here to download the producer Folio tools."

  I don't know why this is happening because I have already downloaded the new tools producer, by following these instructions: http://help.Adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60-21ba9a4512e5e5e0b8d-7 ffe.html

  Anyone have any suggestions on how to fix this? Please let me know as soon as possible.

  Thank you very much for your help!

  Try the following steps:

  1. on your mac, go to the Spotlight, search > uninstall Folio builder control panel - uninstall, uninstall producer Folio tools research - uninstall.

  2 then uninstall Adobe Air.

  3. restart your Mac.

  4. install Adobe Air

  5 re-install the Folio and tools Panel generator producer Folio.

• Many problems with the runtime Adobe AIR for Android

  I created an application on Adobe AIR for Android platform, which requires for AIR. The app is very popular in the Android Market, but many users complain of problems with the installation of the Adobe Air runtime.

  For example, these users phones: LG LGE-P698, LG Pecan, HTC Wildfire. But judging by the fact that users have access to the installation of the Air, their phones are compatible with it.

  Tell me how to solve the problem?

  In addition, I have a few questions:

  1. Decides that the problem of demand for export with built-in AIR runtime?

  2. I have create my applications using ADT. In this case how do I seal AIR runtime?

  3. is it possible to invite the user to download and install older versions of AIR? Where can I find her?

  I hope I can help, because the problem is global.

  Hi Astraport,

  I think you should integrate the air in your application runtime,

  Some time ago I wrote a step by step guide, take a look at this post:

  http://forums.Adobe.com/message/3961579#3961579

  I hope it helps

• Smart Safari search bar, problem with the option 'include suggestions for Safari '.

  Hi all

  I am facing a problem with the search bar Safari Smart of yesterday (January 26, 2016).

  The search bar doesn't work anymore, I can't type, or search or write an http address either. I can only navigate by selecting a bookmark.

  Go to preferences I have all the people with reduced mobility and the disappearance of the problem.

  Then try to isolate the problem, I've found it comes to the "include suggestions of Safari" option in the smart search options.

  Anyone had a similar problem, or have any suggestions on how to get it back to life?

  I must say yesterday, everything working, I have not installed anything new on my Mac.

  Thank you very much!

  Kind regards

  S. Luca

  Try the following steps:

  A possible solution to the problem of address bar: disable the Safari Suggestions

• A few problems with the Satellite U920T-100

  Hi guys,.

  my girlfriend ordered a Toshiba Satellite U920T-100 about three months ago and she had problems with it since. We're not quite sure what causes because they seem to happen randomly.

  The questions are:
  -It starts, but it freezes at the Win8 connection with a blue screen (a rather hot blue, no blue screen of death)
  -It starts not at all, only after a few attempts
  -It will not stop
  -It freezes all by organizing files (for example copy of files from A to B, but not yet large amounts of files)

  New: these questions seem to be completely appearing randomly, I wasn't able to reproduce them in any way.

  Also: WLAN connectivity is really bad.
  The laptop is not able to find networks, while my laptop has no problem with it.
  And when he finds them and connect, the connection be lost - once again: no idea why.

  That surprises me the most, because in tests and comments that I've read that connectivity has been praised everywhere.

  I have reset factory?
  Run through some specific tests?
  Or is is hopeless, because there are so many problems with it?

  I'd appreciate your help!

  Hello

  > I should factory reset it?

  I think you should do that because the issue described can be related to system problems, but also hardware problem (HARD drive for example). The resumption of the factory allows you to check if its software or hardware related problem.

  Usually, all the problems of software (System) could be solved by the recovery process. Hardware problems would continue.

  From my point of view, the recovery of the system is the first step, you should try to solve the problem.
  In case this is not enough, a hardware problem (RAM or HARD disk) is possible, and given that the laptop is still under warranty, I recommend you contact the service to check the unit.

  Hope my advice might help you a bit

• Connection problem with the satellite C660 - 24L

  Hello world

  I have a Toshiba satellite c660 - 24L running windows 7 and have had a problem with internet connection in the last two days.

  Marketing, the internet works very well for around a minute and then I lose the connection. The computer says still connected but the network map displays a problem between the computer and the Wi - Fi router. After that restart the internet works fine again, and then disconnects after ~ 1 min.

  A few times, the computer froze, and gave me a blue screen and memory dump, and then a forced restart.

  Computer behaving the same way when connected and disconnected from the mains.

  All other devices will connect to the router talk-talk with no problems.

  Any help is appreciated, thank you in advance.

  Lewis.

  Post edited by: lewlew

  Have you noticed a few problems if you use the local network connection?
  Original Toshiba WLAN driver is pre-installed on your computer?

  To be honest, it is not easy to say why this show is starting to happen so suddenly.
  Try to back up OS to an earlier time using System Restore tool just to see if the problem will still be there.

• Some problems with the Satellite A210 - 11 p

  I bought my laptop Satellite A210 - 11 p in September last year, but over the few months Ive had some problems with it.

  1. it seems to be overheating to the point of not being able to touch the bottom of the laptop whose total stop me use it as a laptop. Is - this usual?

  2. the screen turns off after approximately 2 minutes after the connection.

  3. any ideas where I can buy a new charger?

  Can you help me?

  Thank you
  Mike

  1 could be an accumulation of dust in the radiator. An FSL can remove it for you, or you can blow with a can of compressed air.
  2 power settings? Perhaps the Toshiba Power Saver is set to decrease intensity when loading in the system tray.
  3. I think an ASP can sell you a.

• Someone at - it problems with the Satellite Pro C650 battery?

  Any other owners have problems with their batteries?
  Even when completely loaded - then unplugged and not on internet, I get less than an hour out of her life.

  Has been using MS Word in the last few days - and had to plug the laptop in an hour!

  Hello

  We need to change and optimize battery usage settings.
  This is possible in power management.
  You can decrease the screen brightness and can change another option which is located in the Windows 7 power management.

  The point is that the battery depends on its use for laptop and you will still notice different battery due to the use of different software and different settings working time.

• Problem with the Satellite A300D - 14 p

  Hi all!!

  I have problem with games Test drive Ultimate and Need for speed pro street, when I press the button run, don t car, when spending the same time, car will lead, then I run the button, but my car don't stop at the same time, then the car stops! When I play this games keyboard button will stick, but when I work or play other games, my laptop works properly!

  Maybe that's the problem of processor, and I need to update drivers...! What do you think?

  I look at my CP CPU load is 100% the two core, when I play this game!

• Problems with the Satellite A665-11Z

  Hi all!

  I have problems with my laptop, the problem occurs for the most part, any time.
  (start cold upwards) on the screen with the AC is plugged and the battery to connect, the laptop stops receiving power and battery light flashes orange. I re plug the AC several times and this until the battery dies

  which gives it a while it stops then when I play a game (Team fortress 2 to be exact or ETS2) play for about 15-20 minutes until the same symptoms recur...

  I replaced the DC Jack inside the motherboard and the problem persists,

  I have baught a new real charger from ebay

  I also have repasted CPU incase of heating, but is not the issue, as it happened on a cold start upward on the screen it just completely cut to connect.

  I also installed windows 7 ultimate sp1 and update all readers
  I just installed windows 8 pro and updates installed etc.

  I removed the battery of the laptop to see if that was the problem, but it still happens, but obviously there is no battery in the laptop just turns off completely without blinking light orange on the sign of the battery

  The battery is weak it holds for 10 minutes at full load, but this isn't the question why the laptop shuts down with the charger because I removed and still...

  anyone has any idea what it is? :(

  Thank you

  I agree with you that isn't related to malfunction of the accumulator.
  The laptop should work correctly even if the battery isn't inserted.
  That's why I think there must be something wrong with the motherboard or the part connected to the mobo

  However, its really hard to talk about possible troublemakers, because he could make almost any part that affect the functionality of the laptop.

  In the case where the motherboard is affected (a kind of power provide electronic malfunction) repair will be expensive affair because the new motherboard is one of the portable computer expensive parties.