Problems with the Wi - Fi after installing the update of platform for Windows Vista (KB971644)

Similar Questions

• 80071AA7 error code received on the attempt automatically install the update of platform for windows vista KB971644

  Can someone help me with this problem, I tried the using the automatic answer to nothing does not. Downloads all the time and tries to install, but always comes back to original setttings.

  Check this box:
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/672d93f9-7635-44DD-9ce1-041b67fc3cdb

• How/where can I find the platform for Windows Vista (KB971644) update and download it?

  I am trying to download Windows Live, but I get the message that I need to update platform for Windows Vista (KB971644)

  I need to find a download site for this update, all I get is a run around using different sites but no download.

  It must be downloaded by Windows Update. Service Pack 2 must be installed as a prerequisite.

  Look at the history of update for updates failed which can block it.

  There are four parts of the update of the platform, each with a separate download. Follow the link for your version of Vista in the following articles:

  • http://support.Microsoft.com/kb/971512
  • http://support.Microsoft.com/kb/971513
  • http://support.Microsoft.com/kb/971514
  • http://support.Microsoft.com/kb/960362

  See also http://support.microsoft.com/kb/971644

• Problem, reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005

  I have problems with MCE 2005.  My hard drive crashed and the technician that restored my repressive said that he could not work in MCE 2005.  It's a shame because he was working before the hard drive crashes.  I work with windows XP.
  When I go to install the internet and begin to test the connection it gives me "Critical error of process - Code 2"
  When I go to the TV configuration, it tells me "Tuner not found".  Even if I know it works because I also Win TV7 in Hauppauge. My TV tuner is HVR-1600.
  With these problems, I thought that the solution might be to reinstall rollup 2 according to the Microsoft.
  http://support.Microsoft.com/kb/910905
  However, when I go to reinstall the Update Rollup 2, it seems to be to establish a restore point and then it stops when it hits hotfix (KB891593).
  I took a copy of the mcelog and have attached a copy of the log below.

  Assistance or management, you can provide me to solve this problem would be highly appreciated.

  At this point, I'm a newbie to this and I don't have a clue as to the cause of my problems and any ideas you may have for me would be much appreciated.

  A generic Package: 10/28/10. 21:32:48
  Looking for an existing installation of the generic package

  A generic Package: 10/28/10. 21:32:48
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB891593 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1046.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package

  Process creation: WindowsXP-KB895961 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1047.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB899337-v2 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB899510 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB888795 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB902841 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Creation process: KB900325.exe/quiet /norestart
  0x00000bc2 returned by process

  Function (ExecCmdInThread) Message of Post for the Package id: 1048.

  "Creative process: c:\0f7019deb34a2ccd3d5c2a4d9e4f3e57\bin\wmfdist95.exe/q: a/r: n /C:"wmsetsdk.exe/WMFDIST/q/r: n /DisallowSystemRestore.
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1044.

  A generic Package: 05/12/11. 21:26:14
  Looking for an existing installation of the generic package

  A generic Package: 05/12/11. 21:26:53
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 06/03/12. 21:27:50
  Looking for an existing installation of the generic package

  A generic Package: 06/03/12. 21:28:23
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 12/02/13. 09:44:39
  Looking for an existing installation of the generic package

  A generic Package: 12/02/13. 09:45:16
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 12/02/13. 10:11:58
  Looking for an existing installation of the generic package

  A generic Package: 12/02/13. 10:12:30
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  Hi kwanray,

  Welcome to the Microsoft community. According to the description of the problem, you can not reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005.

  I'll help you with this problem. I suggest you follow the steps in the article.

  Update Rollup 2 for Windows XP Media Center Edition 2005

  Reference: Support for Windows XP Media Center Edition 2005

  Let us know if you need help with Windows related issues. We will be happy to help you.

• No internet connection after installing the update of security for Windows Vista

  Security updates for Windows Vista released October 13, 2009 and November 10, 2009 still an Internet connection limited Connectivity/No. Did not help uninstall updates. To do the system restore to solve the problem. Why is this?

  drusecord,
  First thing is to update your network drivers for your system.  Then see if after the update of safety, you have a problem.  If you do, I would do the following:

  Disk error checking

  System File Checker

  Then if there are updates that you already have, but are always available to consult this information:

  Troubleshooting Windows Update: offered on several occasions to update

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 8007371B when installing the update of security for Windows Vista (KB978886)

  Update for Windows Vista (KB978886) security fails to install on my computer and I get this error code: 8007371B.

  I use an Acer with Windows Vista Home Edition SP 2.

  Can someone help me?

  Thanks in advance

  Title of contempt, but other things that you can try are:

  http://support.Microsoft.com/kb/947366#resolution3

  http://support.Microsoft.com/kb/947366#resolution4

  Have you tried the standalone version of the software update and run the tool. Now it's time to check if something is the cause of the problem for example security applications or other programs.

  TaurArian [MVP] 2005-2011 - Update Services

• Cannot download the update of security for Windows Vista KB3168965

  I seem to have a problem downloading update security for Windows Vista KB3168965. Windows Update crashes when it tries to download, and when I try to download it manually from the Microsoft Web site, nothing happens. Anyone know what goes wrong?

  To avoid confusion and duplication of effort, please post a follow-up later all replies to your thread of origin-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-update/windows-update-just-spins-and-spins-seemingly/0b7fc1fb-6425-4429-8987-eb81323331ec

• Cannot complete the update of security for Windows Vista (KB2961072)

  I have windows vista and cannot complete the update security update for Windows Vista (KB2961072) KB2961072.  I also ran system update readiness tool. No luck.   Anyone have any ideas on how to solve this problem?

  I had a very very long list of updates from several years ago, now I see only about 60.  OS says I have SP2 yet, but it does not look like it.  What happened to the hundreds of updates?  I have updates of the .net Framework and part of last week.

• Impossible to solve problems with the update of security for Microsoft NET. Framework SP1 (KB2657424)

  I hope that Microsoft Support will answer this question:

  Homepage of Microsoft Windows Update is re - download and reinstall the same update (KB2657424).

  I was advised to try this link: https://support.microsoft.com/oas/default.aspx?gprid=6527 and it brought me to this page.

  I downloaded Microsoft Fixit 50202, installed and ran, but in "default" mode, since he warned that "aggressive mode" may disrupt other updates.

  It took me 8 hours (using a dial-up access provider) to get through all of the suggestions, including those in the following links:

  http://support.Microsoft.com/kb/910339

  http://support.Microsoft.com/kb/906602

  http://support.Microsoft.com/kb/2657424

  http://www.Microsoft.com/download/en/default.aspx

  I followed the suggestion of Microsoft to visit their site and check out "Review of my update history". Since January 11, 2012, when Microsoft first downloaded the update to in question (KB2657424), it failed. Microsoft has offered by clicking on the Red 'x' next to the 'update failed' to open the info on the reason that has been...

  Error code: 0x01

  Microsoft proposed the search for this error code in this list:

  http://support.Microsoft.com/ph/6527

  The error code is not in this list.

  Microsoft said then click "find solutions," "enter keywords" and click on "search". The result was this message: "Sorry, no result found not to match this criterion."

  As I mentioned earlier, since the first update "failed", I clicked several times on the icon (almost daily), which reappears constantly in my taskbar, asking me to "Reinstall", the update, and these measures have been recorded at yellow end of Microsoft. As I mentioned earlier, the update of security (KB2657424) is already listed in my Add/Remove programs as being installed. The "update history" reveals that a series of 'success' (KB2657424) facilities are recorded as well as "failures".

  I went to Windows Update Microsoft Web page to 'review my update history'.  After analysis of my PC, Microsoft has determined that (KB2657424) "has been downloaded and ready to install," with another update of IE (KB2618444). So I clicked both for "Quick Installation".

  When you are finished, I revisited the "update history review". (KB2657424) has been disabled with the green icon as 'successful', while at the same time, in the right box next, there was a message: "Install Updates (1).» So I clicked it, and another window open with the message that the "high priority update" (KB2657424) had to be installed. Yet once, I clicked on "Install updates". He ended with another successful window "Update."

  Then I clicked to "review update history", and it was registered under the name "successful." But the window beside her reappears at the same time: "Install Updates (1).» I have has. ... It was the 3rd time within an hour. 3 slices of the same update (KB2657424) are now disabled with the green icon as "successful"... but the window side "House of Windows Update" reappeared again with the same message: "Install Updates (1).»

  Then I followed the suggestion of Microsoft to type in the "run command" keywords to the day windows journal. Since the January updates up until this date in February the journal is 428 pages (transferred from Notepad to Microsoft Word.)

  Then I followed the instructions to download the update 'NDP35SP1-KB2657424 - x 86 .exe' (1.3 MB) directly from Microsoft link... http://www.microsoft.com/download/en/details.aspx?...28569.

  As instructed, I proceeded to manually install it in "Safe Mode".

  The result was this message:

  Patch installation (c:\35b7019bd0df08ac0003ec93627c\NDP35SP1-KB2657424.msp) failed on product (Microsoft .NET Framework 3.5 SP1). MSI log: Microsoft .NET Framework 3.5 - KB2657424_20120209_020143359 - Msi0.txt

  I scanned the PC with anti-virus and anti-malware programs, and none of them found any malware or virus in the way of updates from Microsoft. "The 'update' where it is saved in the Microsoft Download link is the only and unique" ""NDP35SP1-KB2657424 - x 86 .exe." The "Update" as it is installed in my Add/Remove programs in the Control Panel is the same.

  However, both "Windows Update Home" to Microsoft Page as well as in my BONES, the "update" continues to override all commands of Windows. Another odd fact, is that this "update" that keeps re - download and reinstall itself is actually partitioned into three parts, and I wonder if they may be "clones". Maybe the Windows Installer Service does not know where to place them, or what to do with them. These are three:

  MSIPatchRegFix - X 86 .exe_

  NDP35SP1-KB2657424 - 86.exe_

  NDP35SP1-KB2657424 - 86.exeQ

  Hi Jeine,

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 4: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

• problems with display screen & icon after installing an update

  Since a update for windows install everything on the screen, icons, screen etc are extra-large and normal pages do not enter normal views for example in internet explore like on face book or any what page of the normal display mode that fits into the screen doesn't work, everything is improved, it has nothing to do with the zoom feature. And the icons on the screen are also very large, how to set this back to normal? I searched everywhere and can not find answers! Help, please!

  Hello

  Right click on desktop - customize - display settings - top left adjust font size (DPI)

  Right click on desktop - customize - display settings - Set resolution.

  Your system also has a magnifier built in which could be a problem - it can also often be programmed to work
  on mouse/keyboards.

  How to turn on the Magnifier On or Off in Vista
  http://www.Vistax64.com/tutorials/125037-Magnifier-turn-off.html

  To see if your mouse/touchpad is set to Magnify use Control Panel - mouse.

  ================================================

  You can also try restoring the system to a point before it happened or try to uninstall the update.

  Control Panel - Windows Update - lower left Installed Updates - uninstall

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Problems with the update of drivers for graphics cards

  Hello HP

  I love your work and all, like your design, but the support for this laptop when it comes to drivers?

  Last updated on the site of HP support for drivers and all is April of 2011! Version 8 - something... Latest AMD/ATI drivers is 13.4 or more (stable version)

  My phone is: laptop HP ProBook 4720 s

  And I want to update the driver for my AMD Radeon HD 6300 M series (I think it is 6370)

  And I went on ATI/AMD drivers site many, many times... Use automatic detection features and so on... WHENEVER the pilot who was already on this laptop just it would not update... I'd like to update, because... It is already 2 years from when the driver that I always use is out.

  So if you could please help me solve this problem? Please?

  -When I used the automatic detection feature, it downloaded the driver but it still says that my graphics card is incompatible...

  Hello:

  It is a forum of consumer to consumer.  No HP will address your concerns on behalf of the company.

  If you want to address your concern about any updated video driver, you can contact HP on the link below.

  https://SSL.WWW8.HP.com/us/en/company-information/Executive-Team/CEO-index.html

  Have you tried the driver on the amd Web site beta?

  See this thread where the beta driver worked for the video card more recent 8xxxM.

  http://h30434.www3.HP.com/T5/notebook-display-and-video-e-g-Windows-8/AMD-Radeon-HD-8670M-drivers-needed/m-p/2778823#M69891

  You must select the beta driver for the video card 6xxxM for the OS you are using.

• My computer will not install the update of security for Windows Vista (KB2688338)

  The update starts normally say "create a restore point. Then he said: "some updates were not installed.

  I get the error code is:
  Code: 80070002

  Here's a good link for the specific error code you get:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

• I have a problem with the transfer of files from Windows Vista to Windows 7.

  Original title: transfer files from Vista to Windows 7. Type of processor

  I just bought a new computer which has Windows 7.  I am trying to transfer the processing of speech and spreadsheets from your old computer to new th but all I can manage is a file of jarbled letters on a program called Word Pad. Can someone tell me if there is a secret code for this?

  Windows is NOT equipped with Office installed. You must install your copy of Microsoft Office on the new computer.
  And how on EARTH this has nothing to do with Windows 7 security, privacy, and user accounts altogether, I can't see...

• Impossible to update of the supplements of platform for windows vista, I get error code8007371B

  I could not update all supplements platform since 13/01/11 for 32-bit vista, I get error code 8007371B in case of failure, no idea what this means? and how can I solve this problem

  Hello

  see if that helps

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8007371b/78ca99c3-FA84-404D-A52A-2bd74b2dba74

• Problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  Am having problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  * original title - I'm having a problem *.

  You have the latest drivers?
  http://www.nvidia.com/page/support.html

  Aero - Windows 7 - How to troubleshoot problems with Aero

  (1) first of all, click on the Start button and type in Aero. Now, click on find and fix problems with transparency and other Visual effects of link.

  (2) a new Wizard dialog box opens. Make sure that you click Advanced to solve all problems automatically.

  (3) either the problem will be solved or not. If this isn't the case, you will get a list of items that are potential problems.

  (4) If you want to see more details about the problem, you can click View detailed information. This will give you a list of potential problems that have been verified and those that pose problems.

  If it does not---> click Start---> right click computer---> click Properties

  Click the link for 'Windows performance index' and then click 'rerun the assessment"to refresh your WEI score and try again.

  Note: If you have Windows 7 Starter, or if your system does not meet the requirements for Aero you will not be able to use Aero.