Problems with Windows 7 Starter screen brightness

Similar Questions

• Windows XP Installation problem with Windows 7 Starter home

  I was told that I would have no problem of family Windows XP Setup on a new computer comes pre loaded with Windows 7 Starter.

  When I insert the CD with Windows XP, I get the following:

  Run setup.exe

  I click on install Windows XP

  Program is blocked due to compatibility issues.

  Setup cannot continue because the version on the computer is newer than the version on CD.

  Anyone know how to solve this problem and install Windows XP?

  Thank you Don

  Hello

  I understand that you want to install Windows XP on Windows 7 Starter Edition.

  (1) is the retail Windows XP version or OEM version, you are trying to install?

  Unfortunately, this is not possible. As the operating system installed on your computer is newer than the operating system you are trying to install.

  To resolve this problem, you need to do a clean install to install Windows XP, and you try to run Windows 7 Setup, it will not work. So, I suggest you to boot from the XP CD (if necessary, first change the boot order in the BIOS) and follow the instructions for a clean install. It will initially format the drive for you, so make sure you back up everything you don't want to lose to external media first.

  I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

• HP MINI: problem with windows 7 starter

  I have a hp laptop and I have a problem do not see the product key for window s7 starter, mini hp, is what to do, there are cases we can problem vgeike?

  Hello

  To activate the recovery procedure, if you can't get to Windows continually type F11 at startup until you get to the recovery screen, or from inside windows click on start > all programs > click on Recovery Manager and follow the instructions on the screen to complete the process.

  http://support.HP.com/us-en/document/c01867418

  The above link explains in detail the procedures

  Checkurtech

• Problems with Windows 7 Starter administrator

  I have a HP Mini 200 running Windows 7 Starter.

  I try to add a printer to my netbook, but I have been informed that I need administrator permission to install.  I also have a message that connection manager HP does not support guest accounts.

  I am aware that I don't have a guest account. I try and remove any additional account in the account settings, but nothing happens.  I tried to change my privelages account but nothing happened.  There is a comments file in C: /.  I seem to be going round in circles.  What I want is to run a printer!

  Any advice?

  Hello Simon,.

  I suggest you to activate the integrated using the command prompt administrator account and try to add the printer in this account and check.

  Follow the article to enable the built-in Administrator account.

  Enable / disable the administrator account (hidden, built-in) Local in Windows 7.

  http://social.technet.Microsoft.com/wiki/contents/articles/3040.enable-disable-the-local-hidden-built-in-Administrator-account-in-Windows-7.aspx

  If you are able to add the printer to the built-in Administrator account. I suggest to create a new account user to the built-in Administrator account.

  To create the new user account follow method 2 in my first answer.

  Put us up-to-date with the results after you perform these steps. We would be happy to help you further on the issue.

• problem with windows 7 starter Autoconfiguration IPv4 address and IPv4 address

  I can not change or disable Autoconfiguration IPv4 address in the ipconfig-all command

  I can't connect to the network any ip iput ditect as duplicate.

  can anyone help?

  ipconfig-all

  Windows IP configuration

  Name of the host...: xxx - PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Description...: Realtek RTL8168B/8111 Family PCI - E Gigab b
  It Ethernet NIC (NDIS 6.20)
  Physical address.... : 00-50-DB-00-15-2E
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Autoconfiguration IPv4 address. . : 169.254.242.251 (Duplicate)
  ... Subnet mask: 255.255.0.0.
  IPv4 address...: 192.168.20.155 (Duplicate)
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. :
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {F0C7F7B4-DF88-4908-A9C1-F8B888710CAC}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Hello

  If a computer is only connected to a switch, the automatic configuration is not valid.

  Autoconfiguration applies when a computer is connected to a server that can provide the configuration.

  Wireless routers have a DHCP server that provides a valid IP address.

  Ordinary switch is a transparent network device that cannot provide any configuration.

  When there is no DHCP server, the computer must be configured with a static IP address.

  Look at this page, http://blog.mclaughlinsoftware.com/2009/11/26/windows-7-static-ip/

  Follow the path as described in step 5 (Do not pay attention to specific numbers, your number is to be determined in accordance with your network plan).

  Maybe you want to provide an explanation of what you are trying to reach.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Problem with Windows Vista Start Menu icons

  The Start Menu doesn't display the 9 item in the list, why?

  [img] http://i47.tinypic.com/e053f9.jpg [/ img]

  Uh, after a format, it works well, I don't know what application to be like that.

  and it's okay to large or small icons, it should show article 9.

• Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.

  Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.

  Hi Chaz,

  I thank you for your message and gives us a chance to help you. I see that the Mail app closes while you are typing an email.

  Please answer these questions to get a better understanding of the issue.
  1 have changes made to your computer before this problem?
  2 shut down other applications while they are in use?
  3. do you get an error code?

  You can try these methods to check whether the problem is resolved.

  Method 1: Run the troubleshooter of app.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Open this link to launch the troubleshooter.

  Method 2: Update the application.

  Method 3: Reinstall the application.

  This link has the steps that you can follow to update and reinstall the application.

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Feel free to use the forum for any other issue of Windows, you may have.

• The problem with Windows update - automatic updates service won't start not (error 126)

  original title: the problem with Windows update

  Please help me to get Windows Update operational return.

  XP Media Center Edition, Version 2002, SP3

  Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:
  http://support.Microsoft.com/kb/931852

  Seems to have cleared the error message.  So far so good.

  However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

  I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module could not be found

  I already followed several instructions on this subject:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-access-Windows-automatic-update-after/aeaec175-01f4-47ed-8F97-55b854af4220

  In the thread above, I was following the post on 30 August.  According to Option A, I completed step 5 for the uninstallation of McAfee Security.  At this time, my network card has stopped working.  On the recommendation of the officer, I posted to the Malwarebytes forum.  The officer determined Malwarebytes that I don't have a malicious software.  I ended up posting on forum McAfee to get my network card works again.  Then I reinstalled McAfee and start to run Windows Update.

  I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737.  The difficulty it has worked very well.

  Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058.  When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv.  The message asks me to verify that the user has privileges to take this step.  Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges.  Help me please run this difficulty or recommend another way to get Windows Update works again.

  [1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.

  [2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?

  [3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?

  [4A]... is there a possibility that some of [my data are] infected?

  [4] preventing me from simply infect the whole PC again?

  A1. Yes, and it was my recommendation in August, too.

  A2. Yes.

  A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.

  A4a. Yes, a real possibility.

  A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).

  If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.

  If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Once again, good luck!

• Having a problem with Windows Live Mail lock up shortly after the start.

  Having a problem with Windows Live Mail lock up shortly after the start. When I start the Task Manager to end the process, it sometimes freezes and the only way to solve the problem is to disconnect which forces the profile to close. Assuming a corrupted profile, I followed the instructions of Windows support to fix a corrupted profile and copied all the files except ntuser.*. When I try to paste them into the new user profile (all profiles are admins), I get the error message asking if I want to leave to proceed. When I click on continue, all THE files in the profile block "corrupt" to the new one, including ntuser.*, that I was not choosing. Why? If the files are rewritten empty? Tried 3 times, same result. Please notify.

  I think I found it! I went in the Windows Live Forum and found a thread that looked like my problem. He suggested going to msconfig and take off Live Mail list start. I couldn't find it on the list, but the top element was "" default EXE"something of an unknown manufacturer. I took it out of the startup list, and Live Mail works again! Thanks for your help!

• Problem with windows update and Service pack 1 for Vista 32 bit.

  A screen will appear that says I need to download the Service Pack 1 for Vista. He also says that it is more optimal to download the much smaller file, through Windows Update, rather than on the site. But when I check the Windows Update, it did not for me to download. Update verification that history does not display it has been downloaded before, even if the other Windows updates have been. Do I need? Should I download the version + 400 MB of site or there at - it another way to download smaller files for my PC only? Any help appreciated. Thank you! Here is the text I copied and pasted pop up I got.

  ------------------------------------------------------------------------------------
   
  A problem with Windows Vista
  Windows Vista has stopped working properly.

  This problem has been corrected in Windows Vista Service Pack 1 (SP1).

  What is a service pack?

  An update to software that combines new security and performance with existing updates improvements. Service packs can contain new features or changes to the design of a product.

  To resolve this issue, follow these steps:
  Determine if your type of operating system 32-bit or 64-bit.

  How will I know if my system type is 32-bit or 64-bit?

  Click the Start button, right-click computer, and then click Properties.

  Under system, you can view the system type.

  The average of 32-bit and 64-bit?

  Both 32-bit and 64-bit refer manner that your computer (CPU) CPU processes information. The 32-bit versions and 64-bit Windows are designed for use in computers with 32-bit processors or 64-bit, respectively.

  For more information, go online and read this article for Windows Vista online help:

  32-bit and 64-bit Windows: frequently asked questions

  Check online at Microsoft Download Center to download and install Windows Vista Service Pack 1:

  Windows Vista Service Pack 1 for 32-bit systems
  Windows Vista Service Pack 1 for 64-bit systems
   
  -------------------------------------------------------------------------------

  In the end, P.S. - know what long and thank you in advance for taking the time to read and respond.

  In addition, unrelated question. Does anyone know why my computer would always have an icon in the lower right shows a storage device mass that I did not and when nothing is plugged into ONE of my USB remove locations?

  Ralleny,
  Regarding mass storage disks that appear, you have housing of memory card reader on your PC?  Usually they will appear like this.  I have a HP at home that has a Bay of 5 card reader to the front and I see the same type of items that you see. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Big problem with Windows XP, IE8

  I have a big problem with windows xp. Many things do not work as they had passed him. For example the personal setting are not recalled from session to session. IE 8 does not funtion properly (icons on the desktop are re-arraged, toolbars cannot be deleted or I'm unable to load pages from the internet). Programs do not work, the files will not open. When I look at my hard C disk folders and files are hidden.

  Recently, IE has been upgraded to IE8 and I installed Norton 360 but I don't mean that they caused the problem. However, whenever the Norton scan executes a "error 8 506 421" stands up and says me that I have to uninstall and re install Norton.» But I lost the ADMIN privileges so I am not able to uninstall or go back to a restore point.

  I can't go in safe mode. Pressing F8 takes me to the quick screen C not the windows safe mode screen. I can't go in safe BOOT mode. INI or the other.

  If I switch to another user, everything seems fine but I don't have ADMIN privileges with this user to be able to make changes.

  Is this a problem with norton? IE8? A virus?

  Any thoughts will be greatly appreciated.

  Thanks in advance,

  Lost without a computer

  It sounds like you have a corrupted for your user to administrator user profile.

  You may be able to recover using System Restore to restore to a point in time before your problem.  Based on the F8 key, you bring in a command prompt window, try to start restoring the system to the command prompt by using the following procedure:

  "How to start the System Restore tool by using the option of safe mode with prompt theCommand in Windows XP"

  <>https://support.Microsoft.com/kb/304449/en-us >

  If this does not work, you can still be able to recover by performing a check disk to your command prompt window operation (after that you press the F8 key).  Enter the following command:

  CHKDSK c: /R

  If you are in the Recovery Console, it can simply begin, or you may need to restart before it will start.  Corrupt profiles are most often caused by the Corruption of system files, so a chkdsk operation should be performed little matter how you end up recovery.  Note that this can take a few hours to run.

  "How to perform disk error in Windows XP check"

  <>http://support.Microsoft.com/kb/315265/en-us >

  HTH,

  JW

• FSX and FSX acceleration not will not activate after the uninstallation and reinstallation of the following problems with Windows 7 upgrade

  After the upgrade to Windows Vista Ultimate SP2 Windows 7, I couldn't FSX to load.  It would hang at the splash screen.  This has since been resolved and may have been a conflict between my card graphic and sound card and maybe even my webcam.  I then tried to reinstall FSX.  However, I decided to load up the Accerleration as before, but when I entered the activation code it says after trying that he could not get an answer to the server and to verify that I had an internet session active.  I did, but he always refused to activate.  So I uninstalled FSX acceleration and ran repair on FSX.  But now, he wants the activation code for FSX and when I write this so I always get the message that it cannot get a response from the server, please try again later or check that your internet connection is active.  I have the full internet connection, but doesn't understand why it won't save my activation codes.  I am limited to 30 minutes and cannot be installed acceleration as it wants the code for FSX.  I read on the forum that you can uninstall and reinstall on the same computer as many times you like then why used enable it?  It seems that he doesn't like my internet connection even though I am on the internet.  Anyone has any ideas. My pc is a Dell Inspiron 530 s with Nvidia 9400Gt card and card Soundblaster with 160 gb 1.66 ghz, 4gig ram and router Netgear WGR614 cable wireless

  Hi steve, I managed to install in the end.  I upgraded to a hard drive more that I wanted more space and copied the image to the new drive.  FSX is not yet accept the keys during the installation.  I ran the above utilities (see blog Amritas) to clear the license keys, empty temporary folders and change the registry entry by using 'regedit' on the command line, but still his wouldn't.  In the end, I installed and uninstalled three times until I finally installed it on a partition on the drive and he finally accepted the license keys.  This was done on the original admin user account that I had problems with from the start.  I have now it works.  The utility I used was KB928080 Microsoft.   I can only suggest you keep trying or partition of your hard drive and try and install on the new partition after erasing the license keys and temp folders (see above Amrita).  I can't guarantee that it works well.  To me it's a question of licenses i.e. acceleration has been uninstalled and reinstalled many times so it will no longer accept the license keys.  Happy installing! I don't know how is it frustrating.

• I don't even know what to call this problem with Windows 7! Can someone please read and help?

  Hi all

  What is c?

  I have half a dozen problems with Windows 7 right now, but let's start with the most irritating.  Screens disappear and reappear.

  I'll open a window and then open another (at the same time) for a reason, and if I don't have my mouse entirely on whatever the window, it "disappears".  That is, it will become transparent with just sort of 'framework' around him.  The content is gone.  But they come back.  It makes the idea behind 'Windows' laughable.

  And try to block and the copy is a nightmare of one window to the other.  Or even on the same page.  I try to block something and move away, and the "block" disappears.

  I thought it might be my mouse, which is your ordinary Microsoft Optical Mouse 2V.0, I went to devices and printers and formatted my mouse (I've never done this before) and my Microsoft Keyboard and recorded.  Nothing wrong with the keyboard.  The mouse just kept screwing as it did before, and I used your basic standard settings - nothing fancy or different.

  Now I write in this little place and nothing is to move, the mouse behaves - what IS IT?

  I am getting this problem in Windows 7 because honestly, I have no idea where else to put it.

  And I have just started with the problems.  Can you please, please, please help?

  I can't help but think that all the problems are related, so I'll put one little summary of what else is happening.

  1 out of nowhere part, I got a notice saying that I had to change the settings to allow Windows update immediately and without my permission (I think that's what he said and I know that there is a setting in devices and printers? or something like that where I allow edits without review)

  2. I can't convince my printer there is NO residential group and that I am the administrator and the only person using the computer.  This screw with my settings (wired) network too.

  3. I have a four-in-one printer (print, copy, scan and fax).  I am at home lately and will be years apparently, so I decided that I wanted to get the printer scanner and fax.  He was already printing and copying.  I turned off, unplugged and did not know that I had to uninstall all software and then reinstall it.  I don't have the time to do it again; I want a clean computer before you set up the printer.  Well, it seems to create small problems in the world.  I keep getting directed to devices and printers, but I want to read all the information before I uninstall just in case.

  4 modules!  They are the bane of my existence.  I do not understand what they are doing when I go and look at them individually. I tried to use IE10 without addons and it's just a big headache.

  5 constantly getting a yellow banner at the bottom of my screen asking me if I want to run * some * and I wanted to know the risks involved.

  6. constantly asked about Active X.  What is it and what does want of me?

  7. all of a sudden an hour ago, my computer has decided to go to "sleep" mode and wants me to change user for myself and when I do, it says it is locked, but I hit the beautiful image and it opens on the regular Windows screen.  WHY?  I don't use a screen saver and I got 20 minutes sleep mode which is just the entire dark screen until I touch the mouse.  No more!

  Guys do you see why I'm going crazy?  Help, please!  I spend all my days this last week and one before that trying to move things.  All this because I wanted my printer to scan.

  ···
  I'll open a window and then open another (at the same time) for a reason, and if I don't have my mouse entirely on whatever the window, it "disappears".  That is, it will become transparent with just sort of 'framework' around him.  The content is gone.  But they come back.  It makes the idea behind 'Windows' laughable.

  ···

  ^{Click Start or press the Windows key and type mouse but do not hit Enter. Search change how your mouse above control panel section.}

  ^{When this new pane opens, uncheck the Activate a window by hovering over it with the mouse. Click OK at the bottom to save your changes.}

• Dual monitor boot problem with Windows 7 Professional 64 bit after installation of any graphics program like a game.

  I have built this platform with the help of the owner of a store of 4 cumputer teir 2 years ago. We initially put Windows Vista 32 bit on the system to Vista 64 bit unstable atm. For 2 years, the computer worked like a dream. Last week I made a clean wipe of windows vista and windows 7 professional 64-bit installed. The system has two monitors. The primary monitor is a sony bravia with 26 "led and secondary for watching movies is that a 55 '' led Samsung 1080 p 240 Hz. The graphics card is a geforce GTX 295 nividia. It has 12 GB of Ram and the CPU is an i7 965 @3.20.

  The problem I have is this. After the installation of any game average to work with windows 7, the screens to reset their resolutions automatically more than a few times as they are confused. Sometimes, I have to return the screen to its correct resolution after installation in full. Most of the games and then run fine. After installing the game or any game designed for win 7 startup of computers is all messed up for the monitors. After starting hand 26 "sets its resolution and then after about a second 30 pause the computer makes the sound (the double) that it is resolutuons to reset monitor again? After that this second reset about 1-2 minutes the computer is good to go, unless it sets the res evil. The problem is the computer has never done that with vista and it is very annoying say the least. It still freezes the installation of some games. The only way to resolve what I found is the restoration of the system. The computer starts normally and screen ground is defined once she has always been. The only problem is when you install another game, the problem is their new. This problem is worse in some games.

  The latest nvidia drivers have been installed. There is no conflict in the device with the exception of an old printer Manager. The two comes is set to 60 hertz. I searched all over the internet and there seems to be a problem with windows 7 without solution. I am at a loss. Any other information that you need let me know and I'll post it. Thank you!

  Hi ancientone618,

  It sounds almost as if there is a Windows update that is in conflict with your NVIDIA Driver Installer.  I would say to disable automatic updates of Windows to see if it might help:

  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  In addition, please see the article with some useful information:

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I have a problem with Windows 8 buttons.

  Original title: problems of Windows 8!

  I recently had a problem with most of the buttons. It seems that since I installed a new font, I seem to get white buttons in the application Mail and this http://i.imgur.com/OE6rRxh.jpg?1 around elsewhere.

  Thank you to everyone who tries to help him, but if someone can give me the [s] name of the police [s] that are normally used in Windows 8. I think if I re - install the font or fonts for Windows, it will start working again.

  I recently had a problem with most of the buttons. It seems that since I installed a new font, I seem to get white buttons in the application Mail and this http://i.imgur.com/OE6rRxh.jpg?1 around elsewhere.

  Thank you to everyone who tries to help him, but if someone can give me the [s] name of the police [s] that are normally used in Windows 8. I think if I re - install the font or fonts for Windows, it will start working again.

  Hello

  Those who are not traditional icons they are symbols that belong to the Segoe UI police.

  See the following Web site for an excellent tutorial to solve this problem.

  [SOLVED] Unknown character or vertical Rectangles are appearing in place of metro icons in the Windows 8 start screen and login screen - tweaking with Vishal:

  http://www.askvg.com/fix-unknown-characters-or-vertical-rectangles-are-showing-in-place-of-Metro-icons-in-Windows-8-start-screen-and-login-screen/

  Let us know if it works for you.

  Concerning