Try to activate Vista's problem reports, but get the message "Windows incident reports are disabled." and some settings are managed by your system administrator
Original title: trying to activate the Vist problem reports, but get message "Windows problem reports are disabled."
"Windows problem report is disabled." I can't activate the problem reports and Solutions on my Windows Vista computer. When I click on "Change settings", I would be prompted with the following message if poster "some settings are managed by your system administrator." It's personal PC at home. I don't know how to activate it. I already went to political group & register to adjust some settings. But still unable to activate this.
All settings are disabled as this.
This problem only recently.
Method 1
System Restore does not work.
Method 2
Disable the antivirus software does not work.
But after some research, I realized that the problem could be due to a recent installation of a PC anti-frustration software called Soluto (the star was "Activate Crash Handler Soluto"). It worked after that. After uninstalling, I rebooted the PC system. After the reboot, I checked the reports on the problems and Solutions and found I could now adjust advanced settings. I have also reinstalled the software, Soluto and ensured that this time, "activate Crash Handler Soluto" not was not checked (i.e. enabled).
Tags: Windows
Similar Questions
-
I seem to have problems with my windows update. Last week when I checked to see if updates were needed that I was unable to view them because he said that "some settings are managed by your system administrator" who won't let me change the settings and the display of updates. It's my own personal computer so I am the administrator. However, this week update windows begins to function normally because there was an update available and I managed to download it, but a few days later, the windows on the screen update returned to say that "some settings are managed by your system administrator. I did a scan for spyware/adware/virus recently and I had only a low risk of adware that was detected and deleted without modification with windows update. This problem started right after that I got a warranty of software installed by Dell, I don't know if what they did could cause the problem. The system I use is Windows Vista Home Premium Service Pack 2. Any help would be greatly appreciated!
You can see the effects of a hijackware infection. That being said...
McAfee applications (and Norton) are known for not not upgrade (or uninstalling) itself.
1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507
2. After completing step 3 of triple correction, manually & repeatedly update your McAfee application until you get a prompt 'no more updates'.
3. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]
4. restart & test by...
How will I know if my computer is up to date? :
http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date~~~~~~~~~~~~~~~~~~~~~~~~
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Original title: fingerprint digital mapping
When I try to use a MS fingerprint reader I get the message "no mapping between account names and security IDS was done."
I tried the fix (http://support.microsoft.com/kb/890737?wa=wsignin1.0) without success.
Any ideas?
Hello
Have you tried to reinstall the fingerprint reader, as mentioned in the previous post article?
If your computer is on a domain, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:For more information, see the articles:Hope the helps of information.
Let us know if you need help with Windows related issues. We will be happy to help you.
-
IHAD TO INSTALL A NEW HARD DRIVE IN MY GATEWAY COMPUTER. WINDOWS VISTA HAS BEEN INSTALLED ON THIS COMPUTER, WHEN I BOUGHT IT. I'M NOW BEING TOLD I HAVE TO ACTIVATE MY VISTA AGAIN PROGRAM AND THE KEY TO THE CODE THAT CAME WITH THE COMPUTER WILL NOT WORK BECAUSE "HE IS ALREADY IN USE»
Please, do not type in uppercase. It is considered as shouting in the forums and is bad netiquette. We already know your issue is important to you or you would not use the forum.
Try to activate by phone. Click Start, type "slui 4" and press ENTER. Select the region to get a phone number.
-
I don't know why my installer of windows is in safe mode. How can I change this
Hi sharonww,
You have reached the critical support of Windows Installer. This problem is treated better here in the Windows forum, I moved your thread to the appropriate forum.
Kind regards
Gerard G. -
recently, I tried to change the reg key by going to "HKEY_LOCAL_MACHINE\SOFTWARE\POLICIES\MICROSOFT\WINDOWS\WINDOWS UPDATE\AU" in the right panel, I changed my reg AUoptions value to 0.
I'm using norton 360 (ver 2.5.0.5) .no other norton is installed.my subscription will be emds after 865 days.
UH - huh. You have 2¼ ~ years remaining on an N360 2009 subscription. I see.In this case, the Symantec Support should be able to help you eliminate the hijackware infection which is causing your problem.
Good luck!
-
I try to install my Adobe Acrobat 9 on a newly purchased computer, but getting the message that my serial No. is not valid. I faced the problem of the last time I changed my PC, but Adobe offers support.
Acrobat 9 is not compatible with the current operating system, which is probably the reason why they don't support you, but they still let you know if your s/n is valid or not... Try to contact them again and ask for this information.
-
Please help I can use my network wireless at home I don't have a problem, but when I use it at work I get the message window explorer cannot display the webpage and the worl tour plan has a red cross on it can you help me solve this problem
Hi susanearle,
You can try the steps in your previous thread about this problem?
Please let us know, thanks!
-
I'm trying to update to CC (2014) and get this message: 'failed to install. Setup has encountered an error. Restart your system and try again. (15) I did the reboot, the same problem.
Help!
I solved this problem by replacing the applications folder and the Adobe folder in the library - folder of Application support with the files from before the last update of Mavericks using Time machine.
It worked for me.
-
Whenever I try to update, I get the message "windows Explorer has stopped working". It then seeks a solution, restarts, and immediately stops again. No error, just a constant circle of shutdown and startup code. This has happened for days. I am running windows 7.
I think that norton or mcafee may have been preinstalled as trial versions, but I've never actually used them. Unfortunately I can't use the windows Explorer, so I can't check if they are still there.
We will cover all the possibilities.
1. download each of the tools for deletion below, save it to your desktop:
Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
McAfee removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. After completing some you have a copy of your handy product key, uninstall all software (including LiveUpdate and Add-ons of Norton) Norton through Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view)
IMPORTANT! => Activate the Windows Firewall immediately after the restart.
IMPORTANT! => Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed the steps #4, #5 and #6 below!
4. right click on one of the files that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.
5. Repeat step #4 for another removal tool.
Tips:
-Online use another computer to download the removal tool, if necessary, then transfer it to the computer via CD, DVD, or a USB brand new, never been used (flash drive), or a summer freshly updated in shape.
-Online start the problem in Mode safe computer, if necessary, proceed as above.
-Online after completing all of the above, uninstall AVG Free & reboot. Now do a new installation of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.
Why you don't need your anti-virus to scan your email
http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm-Online download/run system update before running Windows Update again: http://support.microsoft.com/kb/947821
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Ive had problems with itunes, I guess to uninstall it. But I do every time I get the message "windows service install could not be accessed. can not be installed properly. How can I do to solve this problem. It is also difficult to install things, too
Hello
Try this FREE program to remove it
http://www.revouninstaller.com/revo_uninstaller_free_download.html
or track information from apple to the links below
Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.Apple.com/kb/HT1923
____________________________________________________
Problem installing iTunes or QuickTime for Windows
http://support.Apple.com/kb/HT1926
____________________________________________________
Or ask for their support of itunes
http://www.Apple.com/support/iTunes/
____________________________________________________
Also try the discussions of apple itunes
-
I started getting the message "windows Explorer has encountered a problem & needs to close".
I started getting the message "windows explore has encountered a problem and needs to close" when I try to run my camera videos but there always used to work OK
Hello Terry,
I would recommend from your computer in safe mode to see if the problem persists. If you do not experience the problem in safe mode, it's probably caused by a startup item. To isolate the problem, please perform a clean boot. I also recommend scanning for infections and update your drivers.
* I'm moving your thread to our performance under xp forum
-
Original title: Windows Media Player does not
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
I have Windows XP Professional and have tried playing the CD through Windows Media Player. I get the message "Windows Media Player encountered a problem while playing the file. For any additional help click web help. "Then I do. Nothing here helps me. The player shows all my music but puts little red x showing that he can't play. Help! I downloaded version 11 of Windows Media Player, but it is saying the same thing.
Thank you.
Hello
1. don't you also get an error with the message code?
2 have you installed third-party readers part?
3. What is the format of the files you are trying to play?Follow these steps and check if they help.
Step 1:
I would have you readers of third party temporarily Uninstall and check if persists it to the question.
Step 2:
Most likely you need codecs to play these files with Windows Media Player. I suggest looking up codec in the Internet that supports the file format, download and install them.
See also:
Player Windows Media for Windows XP supported Codecs
WARNING OF THIRD PARTY
Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.See also:
Windows Media Player Error Message help
Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Error message: a message session could not be started. Please check your MAPI installation - sending email from MYOB
When I try to send an email to MYOB I get error message saying: "an email session could not be started. Please check your MAPI installation '.
How can I solve this problem?
Hi all
I have a workaround which is a little less boring that the patch "restart the PC": If you get the error where MYOB crashes when you try to send an e-mail, open Task Manager (ctrl-alt-del or right click on the start bar), then go to the "Processes" tab and close all instances of wlmail.exe using the button "complete the process".
It seems that this error occurs if you have Windows Live Mail opened when you try and send emails of MYOB. If you then close WLMail after that get the error the process seems to never close, so you have to close it manually. If you send all your emails with closed WLMail MYOB it seems to be OK.
See you soon
-
This is the error message I get after several days of decline in dropbox, my Norton, saying that he was sure loading! I have read and re read most of what people have written, and I have no idea! I'm not a person irritable and can someone put in easy terms what should I do to solve this problem! I read try it who try and read that nothing works. Does anyone know if something works and can it tell me please. Also if someone from Microsoft is reading this why not have you solved this problem?
Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))
Hello
You did changes to the computer before the show?
These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point. Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive.
Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
http://support.Microsoft.com/kb/973455/en-usI hope this helps. Let us know if you have other problems with Windows in the future.
Maybe you are looking for
-
This boring and preventable. So I have to stop using mozilla and go back to the Explorer?
-
Ned for Deskjet 6540 installation CD
Bought a laptop without CD-ROM and plugged into my HP Deskjet 6540. Charge Windows drivers correctly. However, to access wireless, I need apparently information from the installation CD I can not use on this laptop. I didn't need the drivers, but
-
LaserJet MFP M177 PCLmS Scan to PC Pro?
So we bought recently a Laserjet Pro MFP M177 PCLmS on the screen of the printer I can not understand how Scan to PC. Is it not an option with this printer? It scans very well to the computer, but I want to rise to the printer and press a button an
-
How to disable the LifeCam button
Hello There is a large button on the LifeCam VX-5000 (and possibly other models) whose sole purpose is to launch Windows Live Messenger. It is difficult to not press the key during the movement of the camera. How can I disable it? Thank you ~.
-
Encryption for blackBerry Smartphones
What is the purpose of "encryption", if the unit automatically decrypts encrypted files when they are opened? Rolyb