PROBLOM USE RAM

Similar Questions

• Can I also use RAM from a mac mini in 2012 in an iMac 2010?

  Hello

  I recently updated the RAM in a mac mini 'end 2012' a member of the family of 2 x 4 GB 2 x 8 GB, which means that I now have two spare 4 GB modules.  I also got an iMac 27 "older, (mid-2010), which has 4 x 2 GB RAM modules.

  Can I replace two 2 GB modules in the iMac with two 4 GB of the mac mini modules to increase his performance a bit?  (it is no longer my main machine, but I still use it, and it's not like I'm going to do a lot for the minis ex modules on eBay!)

  Looking at the specifications, the 2010 need PC3-10600 (1333 MHz) DDR3 SDRAM mac 204-pin SO-DIMM, while ex-mac mini modules are PC3-12800 (1600 MHz), 204-pin DDR3 SO-DIMM.  It seems to me like the mac mini modules can roll at a faster rate as the needs of the iMac, but on the assumption that surpassing the requirements can be a problem, they won't work?   Would be risking damage (to the iMac or modules) if I gave them a try? In other words, what is the worst that can happen?

  Any experience/advice welcome!

  Richard.

  Hard to say, but using RAM that differs from the form is always a gamble. RAM rated faster than necessary can work. You can judge them. If there is a problem, that you will be alerted by the operating system no doubt when you try to start.

  To avoid any problems with the RAM does not. He will not or should not damage the computer.

• Can I also use RAM from a broken computer?

  Hey, my mother has the same laptop exactly like me who is the Macbook Pro mid-2012. 13 inches, basic specifications. His computer was getting slow so we bought new RAM for him and he changed. He worked for a little bit, but down the line his computer broke completely. However, I have only 4 GB of RAM in my computer and it broke a 8 GB so I can take the RAM of the computer and put it in mine? Or it will damage my computer? Thank you.

  You don't provide any information about how "her computer completely broken." If you provide more information, then, we can probably provide the best advice.

  • If the RAM caused his MacBook Pro to fail then put in your MacBook Pro is not a good idea.
  • If the RAM is defective, put it in your MacBook Pro is not a good idea.
  • If the RAM is not the cause of the failure of his MacBook Pro and was not damaged by the failure of his MacBook Pro, then it should be OK to use it.

• Applications in itunes use RAM?

  All of my iphone and ipad apps are also in itunes.  Why are they here?  I can remove them from itunes and it will increase my available RAM?

  They don't use any RAM but do not confuse RAM with HDD space. They use hard disk space as well as any storage of files.

• Task manager shows use ram go down 2-4 GB at a time

  Even when I started just the pc to the top when I go into task manager, the use of the ram will be about 2 GB after about 2 to 5 minutes using the ram will go straight up to about 4 to 6 GB when I don't have to start all programs then later fall up to 2 GB. This happens all of the time I use the computer (ram use jumps up and down without reason everything I do), I MSE running all the time and the pilots is on that I scanned with Malwarebytes/MSE/TDSSKiller and windows is up-to-date (windows 7 Edition home premium x 64).

  Any reason, what would happen?

  If you go in the Manager of tasks, and then select process, you can click the memory tab, do the sort Ascending or descending, and that should give you your answer on what is the use of the RAM.

  I hope this helps.

  It's not at all because with 4 GB of physical memory used the process using the most memory is dwm.exe with 34 956 K.

  Finally fixed that was a service called wmpnetwk.exe which would eat up to 2 + GB RAM all the minutes, I turned off since then.

• Thumbnails that use RAM in the first (2015.3)

  Hi, we had a problem with first (2015.3) using the RAM on PC. Whenever we display media thumbnails, first sucks all the RAM until Windows crashes (we can monitor it via Task Manager). This also happens when you link to the media and it consistent. The only work around we have found is to view the media as a list instead of thumbnails when linking to the media.  I put the max RAM for first allocation in the preferences of the memory, but it seems to make no difference. We run on Windows 10 with 16 GB of RAM installed? It's a strange question that seems to be going through all of our machines (which are still configured). Someone else has this problem? We suspect that this is a bug with the latest version of first? Any help would be appreciated, thanks.

  Please write a bug report on it, listing exactly the question & how it goes and of course that you encounter it on several machines in your office.

  It seems a stupid thing both because they do NOT meet the filing of reports, but... it's the only way to ensure you get the information that you experience a bug and what is the management team. It is in the application forms tabulated bug/feature that they decide to engineer time budgeting and priorities.

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

  And Yes, clearly pose with memory leaks in 2015.4 across both Mac and at least Win10 version. I'm on Win7 and with not problems... touch wood... but do not know whether or not it is related to the operating system.

  Neil

• Can I use ram newest and fastest of the new iMac in 2009 Mac Mini?

  I just got a new iMac 27 "2015 5K.  I upgraded the RAM to 8 GB to 32 GB of ram.  I have now 2 4 GB SODIMM to spare.

  Does anyone know if the ram works in a Mini of Man 2009 (although the speed of the mini bus)?

  New ram specifications:

  PC3-12800 1600 Mhz 204 SODIMM CL - 11 1.35v pin

  Mac mini ram Specs:

  PIN from 204 to 1066 Mhz PC3-8500 SODIMM CL - 7 1, 5V

  It will be in good physical shape, it must operate at 1066 MHz bus speed, but it is the tension that could be the problem.

  I wouldn't take this 'thing' hand only to have it go 'beep' to me

  It won't work, the bus on the old Mac is too slow for her

• Pavilion m4-1001tx: using ram ddr3 on ddr3l slot

  There will be no danger or risk to do?

  Hello:

  Most likely the DDR3 memory either won't work, or you will get a BIOS message, you use the memory of bad voltage statement and replace it with the good memory.

  I do not think that you will destroy the PC, but cannot say with certainty.

  But I can tell you, this isn't a good idea.

• Re: Satellite Pro 6100: can I use RAM PC3200 modules

  Hello

  I looked on the specification for this laptop and it does not have to go on 1gig, on the site of crucial, it says to use pc2700,

  But the laptop would always fully work with PC3200 (400 MHz) in it?

  Also the laptop actually supported on 1gig?

  Thank you

  As much as I know the Satellite Pro 6100 supports a FSB 400 MHz.
  So, theoretically, you can use the modules supporting 400 Mhz too.

  It is important that you use the modules DDR SODIMM 200 pin.
  The Mhz may be different.

• Should I upgrade lion 10.7.5 to El Capitan?  I did an EtreCheck; See below for results.  Also, I use Boot Camp with Windows 7 and the software owner using 2 GB of Ram.  Thank you!

  EtreCheck version: 2.9.12 (265)

  Report generated 2016-06-11 11:47:47

  Download EtreCheck from https://etrecheck.com

  Time 01:40

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Verify the signatures of Apple: enabled

  Problem: No problem - just check

  Description:

  Is my Mac capable of running with El Capitan!

  Hardware Information: ⓘ

  MacBook Pro (13 inch, early 2011)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro8, 1

  1 2.3 GHz Intel Core i5 CPU: 2 strands

  8 GB RAM

  BANK 0/DIMM0

  OK 4 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1333 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = battery check - Cycle count = 822

  Video information: ⓘ

  Intel HD Graphics 3000 - VRAM: 512 MB

  Color LCD 1280 x 800

  919Swa1 1440 x 900 at 60 Hz

  Software: ⓘ

  OS X Lion 10.7.5 (11G 63) - time since started: about one day

  Disc information: ⓘ

  ST9320325ASG disk0: (320,07 GB) (rotation)

  < not mounted > (disk0s1) disk0s1: 210 MB

  Mac HD (disk0s2) /: 119.00 (GB 98.72 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  BOOTCAMP (disk0s4) / Volumes/BOOTCAMP: 200,21 (Go 148,10 free)

  MATSHITADVD-R UJ - 8À8)

  USB information: ⓘ

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. FaceTime HD camera (built-in)

  Logitech USB receiver

  Computer, Inc. Apple IR receiver.

  Lightning information: ⓘ

  MacBook Pro from Apple, Inc..

  Kernel extensions: ⓘ

  / Applications/VMware Fusion.app

  com.VMware.kext.vmci [no charge] (4.1.4 - 2013-10-25) [Support]

  com.VMware.kext.vmioplug [no charge] (4.1.4 - 2013-10-25) [Support]

  com.VMware.kext.vmnet [no charge] (4.1.4 - 2013-10-25) [Support]

  com.VMware.kext.vmx86 [no charge] (4.1.4 - 2013-10-25) [Support]

  com.VMware.kext.vsockets [no charge] (4.1.4 - 2013-10-25) [Support]

  Launch system officers: ⓘ

  [loaded] 6 tasks Apple

  [loading] 116 tasks Apple

  [operation] 11 tasks Apple

  Launch system demons: ⓘ

  [loaded] 58 tasks Apple

  [loading] 126 tasks Apple

  [operation] 43 tasks Apple

  Launch officers: ⓘ

  [loading] com.oracle.java.Java - Updater.plist (2014-03-01) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-05-09) [Support]

  com.Apple.remotepairtool.plist [loading]

  [loading] com.oracle.java.Helper - Tool.plist (2014-03-01) [Support]

  User launch officers: ⓘ

  [loading] com.adobe.ARM. [...]. plist (2013-12-15) [Support]

  com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  VMware Fusion Helper Application (/ Applications/VMware Fusion Helper.app Fusion.app/Contents/Library/VMware)

  Other applications: ⓘ

  [performance]    [0 x 0-0 x 12012].com.vmware.fusionStartMenu

  [performance]    [0 x 0-0x9c09c].com.etresoft.EtreCheck

  [performance]    [0 x 0-0xf00f].com.vmware.fusionDaemon

  [loading] 339 tasks Apple

  [operation] 129 tasks Apple

  Plug-ins Internet: ⓘ

  AdobePDFViewerNPAPI: 11.0.11 - SDK 10.6 (2015-05-12) [Support]

  FlashPlayer - 10.6: 21.0.0.242 - SDK 10.6 (2016-05-14) [Support]

  Flash Player: 21.0.0.242 - SDK 10.6 (2016-05-14) [Support]

  AdobePDFViewer: 11.0.11 - SDK 10.6 (2015-05-12) [Support]

  JavaAppletPlugin: Java 8 73 build 02 update (2016-03-17) check the version of

  QuickTime Plugin: 7.7.1 (2014-09-21)

  3rd party preference panes: ⓘ

  Flash Player (2016-05-09) [Support]

  Java (2016-03-17) [Support]

  Time Machine: ⓘ

  Information of Time Machine requires OS X 10.8 "Mountain Lion", or later.

  Top of page process CPU: ⓘ

  4% WindowServer

  3% fontd

  0% SDM

  0% VMware Fusion Helper

  0% blued

  Top of page process of memory: ⓘ

  172MO Web process

  Safari of 147 MB

  MDS of 123 MB

  Mail of 98 MB

  90 MB App Store

  Virtual memory information: ⓘ

  4.21 GB of free RAM

  3.78 GB used RAM

  Used Swap 0 B

  Diagnostic information: ⓘ

  10 June 2016, 11:37:16 self-test - spent

  Yes, the Lion is a dog, probably the worst version of Mac OS X. I'm surprised that you don't have to level now.

  Also note that your model can be upgraded to a maximum of 16 GB of RAM.

• What Ram modules are used in the Satellite Pro L870 18R

  HYA

  I m new to this forum so apologies if I posted in the wrong place.
  I just bought a Sat Pro L870 18R for my wife as a Christmas pressy.
  Before she gets to him I was going to increase the Ram of 4 GB to 8 GB.

  I know he has a single stick of ddr3 1600 Mhz in it, but without opening it you know which manufacturer to use Ram Tosh for this machine?

  I like to keep the same manufacturer.
  If I can at least give him a chance to run dual channel. I know I couldn't just take part and look like I m going to have to open it to adapt to the new ram anyway.

  I just i didn t want to keep o he packing and unpacking, and opening and closing upward are a gift after all lol.

  Any help appreciated thnk

  Above all the RAM brand is very important to get the RAM running in dual channel.
  It is important that the two RAM modules will support the same features.

  As far as I know the unit was equipped with a SO-DIMM 4 GB RAM DDR3 1600 module MHz (PC3-12800). I guess the reference is: * PA3918U-1M4G *.

  Welcome them

• Can Tecra A8-143 - I use DDR2-800 RAM?

  I have 143-Tecra A8 with memory 1 GB (2 x 512 DDR2 bus 553) and I want to move to 4 GB (2x2gb DDR2) but only 800 buses available on the market!

  Bus DDR2 800 will work with card mother A8 or it will creat problems?

  enjoy food quick return

  Thank you

  Wael

  Hello!

  Of course, you can use RAM DDR2-800. This is really no problem because the RAM is compatible downgrade. This means that the RAM can run with 800 MHz but at lower speeds too.
  AFAIK the Tecra A8 has a 667 MHz bus speed so the new RAM will work with 667 MHz.

  But don t forget to buy high quality RAM. I always buy Kingston RAM for my Toshiba laptop and they work perfectly. I never had problems with the Kingston RAM.
  [RAM Kingston for Tecra A8-143 | http://www.ec.kingston.com/ecom/configurator_new/modelsinfo.asp?SysID=33219&mfr=Toshiba&model=Tecra + A8 & search_type = & root = us & LinkBack = http % 3A % 2F % 2F www.kingston.com & Sys = 33219-Toshiba-Tecra + A8-143 & distributor = 0 & submit1 = search]

  Good bye

• HP Envy Phoenix 850-055qe: I just bought the HP ENVY PHOENIX 850qe, what brand of RAM DIMM DDR3 - 1600 HP uses it?

  I just bought the Office of series 850 want phoenix with 16 GB of RAM DIMM DDR3 - 1600 (2x8GB). The problem is I intend to switch to 32 GB of ram, but I don't know which brand to buy to match the stock ram that would usually come standard with the machine. I buy ram online so he comes the same day as my office. Does anyone know what brand hp uses? crucial? Corsair? PNY?

  Thanks in advance!

  Lews live Productions

  HP uses ram from different manufacturers, depends on which it can provide at any time, it isn't the brand but the specs that matter.

  I would call Kingston or Crucial on the phone for help on the selection, as they ensure the compatibility.

  Kingston support numbers

  http://www.Kingston.com/us/support/LiveSupport

  Crucial

  http://www.crucial.com/USA/en/support-contact

• How to check the use of the ram?

  I have 3 GB of ram on my pc, and I want to know how to check the use of the ram in xp pro? is the use of FP in taskmanager? or (k) of the kernel memory?

  I have 3 GB of ram on my pc, and I want to know how to check the use of the ram in xp pro? is the use of FP in taskmanager? or (k) of the kernel memory?

  Yes, Yes... and no. All applications on your computer uses RAM, not only the pagefile or system (kernel).

  What are you really trying to do?

  See http://www.petri.co.il/pagefile_optimization.htm , especially the part under "How Pagefile your system use?"

• Vista Business 64-Bit with AutoCAD 2009 does not seem to use all 8 GB of RAM available.

  A workstation newly built (S5000XVN Intel / Xeon / 8 GB RAM / 2 GB RAM video) with Windows Vista Business 64-bit is used with AutoCAD 2009 (64-bit).  The workstation hangs under stress, apparently because not enough RAM is available.  ("Stress" is "Turning entirely made of a certain complexity 3D drawings")

  The Task Manager / Performance tab indicates never to use RAM above about 3.25 GB, even if ten or more concurrent applications are loaded, including IE 8 (6 graphically heavy windows) and AutoCAD with 6 or more complex drawings open at the same time.

  There are two issues, I think:
  1. in the event that a busy workstation indicate use RAM above the 32-old bit of 3.2 GB limit?
  2 are there MS Windows Vista settings that are necessary to ensure the use of RAM available?

  Thanks in advance.

  Thanks for the reply.

  I studied the installation of AutoCAD 2009.  It's actually the 64-bit version that is installed, and the Task Manager reports it as a 64-bit application when it runs.  (In other words, it is not marked as a 32 bit application.)

  I must admit that I no longer believe that the machine is running out of resources or do not use all the resources available to it.  We tested the machine by throwing 18 complex, fully rendering the 3D drawings within the Academy, in addition to two cases of IE 8, three instances of Explorer Windows and MS Windows Mail.  Use of the RAM did climb, reaching finally the 4.06 GB, clearly indicating that the 32-bit 3.2 GB limit has been exceeded.  It seems that just drawings don't take up that much RAM.  BTW, there was no increase in the paging activity that I could see.

  However, the application does not seem to be frozen or looping when the client attempted to turn one of the drawings.  The CPU on the two wires (Xeon processor) usage increased to 55% and remained there. the State of the process, as reported by the task manager went to "Not responding" and stayed there; and the display of the image froze on an empty workspace, with a three seconds flash drawing on every 20 seconds.

  So: It now seems that there is a problem with AutoCAD, not a Vista problem.  I would appreciate comments, however, if you think that this analysis is wrong, incomplete or based on wrong assumptions.

  Thanks for your help.