ProBook 5310 m: fake Windows key when installing Windows 10

Similar Questions

• The time machine shaped my result of ssd unable to check my key when installing windows?

  Brief summary:

  My machine: Macbook pro mid 2012
  What I have: Samsung Evo SSD, optical Bay caddy, 8.1 windows bootable dvd with serial
  I wanted to do: install windows in my second internal SSD (optical Bay)
  What went wrong: Enter key I get: "we could not verify the product key. Please check your installation media. »

  I suspect that the problem is: I have formatted by mistake the SSD mac front.

  Question: Has been put in shape my SSD the cause of the problem? and if yes how can I do to reset?

  Detailed long version

  I have a macbook mid 2012 retina not pro that I wanted to have the option to be able to boot from a windows and a mac. As a result, I bought a samsung EVO solid state drive for this purpose. I decided to try the drive and put it in instead of the optical drive caddy the day I got it. I was invited with the message that the mac was unable to acknowledge it and follow a few steps online to format. I would find it later when we look at a forum that I should have left the unformatted SSD. However, I tried to install windows on the EVO by placing the optical drive in the computer, put the EVO in the main Bay. I put the windows cd in and followed the installation. Everything was good until I had to put in the windows key. I put in and received the message "we could not verify the product key. Please check your installation media. "I double checked to see if it was right by voluntarily entering a wrong key he gave me a message that the key was invalid. Snooping around, I tried to reset the drive by using the offer of advanced tools and I was told that windows did not have access to the partition or something of the sort.

  A format the drive of the source of the error and if so is it possible to return to the factory settings?

  All the advice/help is greatly appreciated! Thank you very much!

  The formatting SSD is not related to the issue with the product key. Windows Setup reformats the SSD in the main Bay NTFS still. If the SSD is less than 2 TB, you can format the MBR with attempts as well as FAT32 format.

  Your model is compatible with the installation from DVD and USB, both. You can also download the ISO of Microsoft W8.1 to the https://www.microsoft.com/en-us/software-download/windows8ISO to ensure that your DVD is not a several bits (32-bit and 64-bit DVD).

• invalid key when installing itunes

  HP Pavilion touchscreen windows 8.1

  When you try to install the new version of itunes my phone says 'invalid keys for use in specified State "? How can I change the status? Help, please!

  Hello

  You need to uninstall an update of windows for this error to go away, that the number of update is (KB2918614)

  How to info

  http://Windows.mercenie.com/Windows-8/How-to-install-and-uninstall-updates-in-Windows-8/

• Wrong key when installing OS on Satellite A20

  Hello!

  I need to reinstall Windows XP on Toshiba Satellite A20-S103? PSA20E model number. Notepad is for business, so I need with license.
  Original OS laptop is lost... The key is for Windows XP Home Edition. I am tired SDO and variants of the operating system BOX, but then the facility tells this invalid key... Where can I download the Xp version for this laptop?
  Thank you

  The registration key that you see at the bottom belongs to the version of the OS that you have with your laptop and you can not use for installation with your installations of Windows XP Home edition CD.

  Each laptop comes with the recovery image and may not be downloaded. To order the CD of original facility is also problematic because you old enough laptop model.
  If you need an OS with license purchase the CD of installations of Microsoft with the appropriate key and use it for installing Windows XP Home edition.
  All the necessary drivers, tools and utilities, you can find and download from Toshiba support page under http://eu.computers.toshiba-europe.com > download & support.

• How to solve 'access denied' on the update of the registry key when installing XP SP3?

  Running XP 2002 version upgraded to SP2 on a Gateway Pentium. Downloaded and used Microsoft SP3 disk, but the "access denied" message whenever I try. I have disabled 3rd party software, but still have the question.

  Hi Robert1947_995,

  You can download the Microsoft fixit from following link and check if the problem persists.

  http://go.Microsoft.com/?linkid=9730795

   

  Registry warning

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Let us know if that helps.

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• I had to redo my computer why can't use my product key when I installed windows, the first time

  I had to redo my computer why can't use my product key when I installed windows, the first time

  How to solve the error codes on Windows 7 0xC004C008 Activation of Volume
  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-activation-error-0xC004C008

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• G6 notebook pc Pavilion: Hello, I tried to create a bootable USB key to install Windows XP. WH

  Hello
  
  I tried to create a bootable USB key to install Windows XP. When I tried to copy my files to osi XP USB tool of Flashtoboot my laptop suddenly stopped working with some messages of the blue screen and hit up with a screen that is black with the letter 'J '.
  
  I restarted my laptop using the power button, but all the time, I get a black screen with the letter 'J '. When I tried Ctrl + Alt + Del screen will blink for some time and time again I get the same black screen
  
  By pressing the F1 key, I did the test of memory RAM and hard drive memory. Both tests passed successfully. I tried starting the screen remains black local disk.
  
  Product: Model LAPTOP computer: laptop HP pavilion g6
  Product number: QG470PA #ACJ
  
  OS: Windows 7
  
  Thank U
  Look: -.
  EDWARD07Hello,
  
  I tried to create a bootable USB key to install Windows XP. When I tried to copy my files to osi XP USB tool of Flashtoboot my laptop suddenly stopped working with some messages of the blue screen and hit up with a screen that is black with the letter 'J '.
  
  I restarted my laptop using the power button, but all the time, I get a black screen with the letter 'J '. When I tried Ctrl + Alt + Del screen will blink for some time and time again I get the same black screen
  
  By pressing the F1 key, I did the test of memory RAM and hard drive memory. Both tests passed successfully. I tried starting the screen remains black local disk.
  
  Product: Model LAPTOP computer: laptop HP pavilion g6
  Product number: QG470PA #ACJ
  
  OS: Windows 7
  
  Thank U
  Look: -.
  EDWARD07

  EDWARD07

  Hello;
  
  Let me welcome you on the HP forums!
  
  According to your description, my guess is that the program that you used has replaced the boot files on the hard drive, NOT on the flash drive. Thus, your PC no longer starts.

  To resolve startup problems, you need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  You will need to create something called a CD-ROM to repair Win7 - which you could have done for free when Win7 was working.  This will repair the boot loader files, and if that is the problem, your PC will start OK after that.
  
  But now, which can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/
  
  When you download this file, it will be an ISO file.
  
  To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/
  
  Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.
  
  To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/
  
  Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.
  -------------------------------------
  
  Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html
  
  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  Good luck

• HP Envy M6: How to change partations when installing a windows recovery.

  Hi guys, I have a query imp and I did discuss with the experts here,

  I bought a HP ENVY M6 and its partation is very iritating to me, there 750 GB hard drive and it is partationed in 4 disks providing 100 GB 250 GB 200 GB 100 GB partations doing like this, my records are presented in a photo... I don't like this partation, I dun use too readers it irritates me, what I like is 3 disks, disk hard 100 GB C for windows, 100 GB for my data imp as works, studies and pictures etc and the rest mix 500 GB for movies and songs and games,...

  So, my problem is that my laptop has windows genuine in there and I don't have a cd box or the key of windows with me, it came pre insalled. so I don't have the key for activation with me, I have just the RECOVERY DISC as pictured.

  

  what I want to do is I want to install windows from the beginning and I want to do partation again and format records there, too, is it posible I go to the home screen format partations and partation partations and then install my this windows from the RECOVERY DRIVE, coz I want this windows genuine...

  the option of partation windows give at the beginning of installation illustrated

  yuzzii wrote:

  is it possible that I have make a usb bootable from the recovery disk and start the installation of him?

  pls see this post, full

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/I-want-to-change-partitions-when-installing-Windows-from-a/m-p/4889272

  Who is spamming. Don't create messages about the same thing. I won't answer any questions about the same thing in another post by you. See and read the rules for participation that you have accepted.

• ProBook 4440S missing TOO MANY DRIVERS after installing Windows 7 Home Premium repair

  Hello I had to reinstall Windows after a hacker locked my system. I had not had the unit for a long time, so don't lose tons of files or important data. (Yay!)  But, I had not had the time to really get to know my system either... so now I have the new number to try to determine what the material is that is not recognized.  I thought I'd come to hp.com, find my drivers to download and DO. Instead, I ask help in the identification of "devices", OR to be pointed in a direction that could help me get there?  (When I got to the driver download page and seen everything there was to choose from - this is when I'm here!)

  (HP ProBook 4440 S under WIndows Home Premium 34 bit)

  I have yellow exclamation points on the following devices in Device Manager:

  1. base system device

  2. base system device

  3. Ethernet controller

  4 > network controller

  5 Com Simple PCI device

  6. USB controller

  7 unknown Device

  If he wasn't SO MANY pilots, this could be simple!

  One who can help?  I'll appreciate it of course!

  Thank you!!

  Hello:

  Here are links to the drivers you need...

  First install the chipset driver and restart.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229488&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_111367_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Basis of the system of the unit (both):

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229488&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_124666_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Ethernet controller:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229488&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123192_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Com Simple PCI device:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229488&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_124514_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  USB controller:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229488&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_115974_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Unknown device:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229488&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_124200_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  There may be several model HP wireless cards installed in your laptop, so I can't post just the driver for the controller network without more information.

  Follow these steps, and I'll post the link for the network controller driver, you must...

  Go to Device Manager, find the other devices category, click the network controller needing drivers.

  Then click on the Details tab at the top of the control of the network window.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters that start with PCI\VEN.

• Error code 45090 indicating the invalid product key when reinstalling Windows XP.

  Original title: Windows XP Activation.

  I reinstall Windows XP on my computer. I used exactly the same media that came with the computer. But when, Activation by internet, I got the error message 45090 indicating invalid product key. I have check the product key and enter it again, but the problem still persists.

  I tried via the phone (number 1-88) by entering the long number (Installation id) and it tells me that it is a number of invalid product or something like that.

  Help!

  Hi uagtecos,

  You can follow this link completely & check if the problem persists.

  You receive an error message after you enter the product key when you try to install Windows XP

  Hope the helps of information.

  Please post back and we do know.

• Do we need to key in the product key when we upgraded from windows vista to windows 7?

  After upgrade activation key

  Do we need to key in the product key when we upgraded from windows vista to windows 7?

  When you install Windows 7, you must enter a key within 30 days to activate it. If you do not want to enter the key during installation:

  On the page to enter your product key, do not enter your key and uncheck the "Automatically activate when online" then click OK/next to complete the installation.

  Activate Windows 7 on this computer

  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer

  Installation and reinstallation of Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

• then restart the laptop but when installing loading file comes portable stop and start again, then window 7 starts with the non-genuine version

  * O.T. > genuine os

  I real operating system of Windows 7 when I get the window update 10 at that time there I download laptop is restart but when installing password file loading then laptop stop and try again and window 7 is then start with no authentic version what to do to get a license back I know product key unique for this window I don't strip license the back of the laptop or not just any what CD what do I do

  How to: fix Windows 7 or Windows 8.1 active or true reports after cancellation of Windows 10

• Error when installing Windows 10

  Hello

  When installing windows 10, it's show error 8007002.

  I deleted temporary files, but its still the same error showing.

  Help, please

  80240020 8007002C 80246007

  1. navigate until "C:\Windows\SoftwareDistribution\Download" and delete the contents of the folder. 2. press on the Windows key + X > click (Admin) command prompt and then type "wuauclt.exe /updatenow. Press enter 3. open Control Panel > Windows Update and Windows 10 should begin to download...

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times and try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Do a clean boot, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
  • If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

    How to: upgrade previous versions of Windows using the file ISO for Windows 10

    How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• Error 1406 when installing software Karl on windows 7

  Hello

  my system displays error 1406 when installing software Karl.

  Pls let me know if theres a problem with the system or the software

  and the solution to this problem as soon as possible

  thanking you...

  Guy srslly? Just go open Regedit.
  Hold the windows key + R, then type regedit
  then goto HKEY_LOCAL_MACHINE > SOFTWARE >
  and right clikc on Karl and then delete.
  Delete registry filed files and then reinstall kkkkk. :), hope it works.