Procedure to change the IP address to the Dell compellent

Similar Questions

• What is the procedure to change the location of the public folder in Windows 7? __

  The location under different Public folder properties tab States "You can change where the files are stored in this folder somewhere else on this drive hard, etc.."  However, there is no button 'Move', as on the location of My Documents folders tab, music, photos and videos.  What is the procedure to change the location of the public folder - Documents, music, photos and videos?

  I answered this question already. You can see here. samc1

• Procedure to change the CLI password for user directors

  Hello

  I have Cisco context directory Agent 1.0.0.011 installed by another Member of the team and I want to reset password admin CLI. Tracking how do to reset passwrod (DCO of admin password reset application) but I always connect with the old password.

  Can anyone provide some documents what would be the correct procedure to change/reset password for the user admin CLI? It's password during the original installation is complete.

  Thank you

  The command you typed: application ACD reset admin password changes the password for the application of cda admin only.  This is the admin of WebGUI.

  To change the password for the CLI, try the following command:

  Enter the Configuration mode.
  Run the username password plain | hash role admin | user command
  

  For example: username, password admin hash Cisco123 admin role

  The words in bold are provided by you.

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• Correct procedure to change the Windows password

  This is similar to the post http://forums.lenovo.com/lnv/board/message?board=SpecialInterestsUtilities&message=3111&query.id=101... but I'm not looking for a workaround solution. I'm looking for the right way to avoid the problem.

  When I changed my Windows password in Windows and restarted, the first thing he did was ask me after that I spent my finger. He said that he wanted changed in the security of the client system. I entered the password and it erased, and then connected. After the start, another window pops up asking my Windows password for the security solution client. I entered, but this was rejected. I tried again, rejected. I tried again using any password that I use. All rejected. Maj CapsLock and numlock off the coast.

  Fortunately, I was able to cancel out of it. I changed my password to the original and then restarted. The same claims were held, but he agreed the old passwords. I am in control, but with my original password. Phew!

  Then... What is the correct way to do it? Client security rejects the new password. Anyone know what I'm doing wrong?

  Thanks for your help!

  _Bruce_

  Windows Vista Ultimate Edition

  T500

  I found a solution in case anyone else comes across this. It may be the best or only one, but it worked...

  (1) disable Security TPM. Do the reset, etc.

  (2) use the control panel Windows users to change your password.

  (3) turn on the TPM secure. Do the reset and the new password asked a couple of times.

  Fact.

• The appleid on my iphone is an old email address that I no longer have access and for which I don't remember the password. My ID apple implemented through my pc is my new e-mail address. How can I change the appleid on my iphone to match my new email addr

  The appleid on my iphone is an old email address that I no longer have access and for which I don't remember the password. My ID apple implemented through my pc is my new e-mail address. How can I change the application on my iphone to match my new email address

  Here is the procedure to change the Apple ID:

  Change your Apple - Apple Support ID

  If bad comes to worse, use the link below to contact the Apple Support.

• How to change the first vmware account email

  Hello

  I need to update my e-mail account, but the information available in http://communities.vmware.com/docs/DOC-12285 does not work...

  I can't create another account bec I have attached to this support agreement...

  How can I update my email?

  Thank you

  I guess that you are referring to the procedure for changing the e-mail address below.  You have already completed step 5?  If so, that you have received e-mail notification sent by the Community Manager that your account has been updated?  If Yes, and you can't always connect with your new email, you will have to repeat steps 5 to 7.

  Kind regards

  ==============================================

  How can I change my e-mail address on the community platform?
  If you change your e-mail address, please follow the steps below.
  1. go to your profile Page
  2. change your community profile
  3. Enter your new email address and save.
  4. create a new VMware account for your new email address. Make sure that you choose the option "no, I don't not want to join the VMware community" as the Community Manager will transfer your existing account from the community into your new VMware Store account.
  5. send an email to [email protected] with the following information:
  Subject: Change of address Email
  Old Email address & community UserID
  New Email address
  6. once the Community Manager updates the account, we will inform you by e-mail.
  7. connect with the new email address (you may need to close your browser sessions until you're able to connect)

  ===============================================

• change the language of photosmart C6250

  I need a step by step procedure to change the language on a Photosmart C6250 all-in-one printer.  A grandkid "helped me' and now I have an unknown language sends me guests.

  Hi johnschl,

  Thanks for the additional information.

  I'll rephrase the instructions for you:

  1. Press the button on the front panel with a picture of a key on the subject (it's the button of your facility)
  2. Press on the arrow down to option 3 is highlighted and press 'OK' (there is a button that says OK on the front panel).  This will be the "preferences".
  3. Ensure that the first item is highlighted and press 'OK '.  It will be 'Set Language'
  4. Please scroll up to 'English' languages are highlighted and press 'OK '.
  5. When you are prompted to confirm the language select 'Yes' and press 'OK '.

  I hope this works.

• How can you change the starting sequences oh Hp 6735 b, how can you get the Bios?

  I tried to install another version of my windows vista interprise, I couldn't because I could not find how to boot from the CD/DVD?

  I started the computer, pushed F1 there is no way to get the starting sequences...

  I need help here

  Hello

  When you turn on the computer, you must quickly look at the bottom of the screen.

  It should tell you right there what key press to enter the Bios/Setup

  Here is the information from HP on how to enter the Bios/Setup.

  "The Boot order in the system BIOS Setup.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00364979&cc=us&destPage=document&LC=en&tmp_docname=c00364979

  The boot order configuration

  The boot order can be configured on the Advanced tab in the BIOS Setup menu. The procedure for changing the boot order may vary according to the model of the computer.
  

  NOTE: BIOS configurations vary depending on the computer. For more information on a specific computer, refer to the documentation provided with your computer or visit HP drivers and downloads page . The BIOS settings are usually listed in the Guide of Service and Maintenance.
  Follow the steps below to configure the order of boot on most computers.
  1. Turn on or restart the computer.
  2. While the display is clear, press the f10 key to enter in the settings menu of the BIOS.
     

     NOTE: the BIOS setting menu is accessible by pressing the "f2" or key f6 on some computers.

  3. Select the Advanced tab using the arrow keys left and right.
  4. Use top and down arrow keys to select the boot order .
  5. Follow the on-screen instructions to change the boot order.

  See you soon.

• Can I change the status as "Shared" to "Not shared" tab sharing a particular username?

  I need to change the status in order to part of effect of the procedure to change the above city of particular name.

  Hello Irvine007,

  In addition to dhhuang comment, I've added a few links that I hope will help.  However, we need to further information regarding the specifications of what the user is or not sharing.

  TechNet:

  http://TechNet.Microsoft.com/en-us/library/cc773004 (WS.10) .aspx

  Thank you

• How to change the installation of K: drive C:?

  When I load software on my computer he always asks the K: drive. Could you please inform me where I can go in to C:.  My K: is my external hard drive.  Thank you Dee

  Here is the procedure to change the default path for the installation of software on Vista:http://www.mydigitallife.info/2009/03/23/how-to-change-default-windows-installation-path-to-your-desired-path/.  In this case, you would choose a location on the C: drive (maybe C:\Program Files if it is still there - or create this folder if it is not).  Make a new folder in the directory root - don't bury it in another folder or even deeper.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Need to change the ACE 4710 certificate that uses the https access management

  I would change the certificate in Cisco ACE 4710 that uses for managing https access to the device. We always get the notice of security from the GUI because it uses a self signed certificate for access to the administration. Please suggest there is any mechanisam or availabel for the procedure to change the self signed SSL certificate?

  Ranjith,

  You can check this bug:

  CSCte42757

  Jorge

• change the text typed on a photo/drawing/product

  

  the step by step process?

  The pixels that form the lettering on this image are probably embedded in the image (i.e. are rasterised), so it cannot be changed. The best procedure to change the lettering would be to remove the text using say the tool clone, then creates the text once again on a separate layer, choose a font matching and color, and then use the deformation tools to resize, it warp and place it in place to replace the old text. Then save it as a JPG file for other uses, such as on a Web site.

• How to change the name of host server IMO?

  Hi, guru.

  Is it possible to change the name of host server IMO?

  Architecture:

  Server A - Oracle RDBMS

  Server B - IOM: admin, IOM, soa.

  Version of IOM - 11.1.2.1.0

  (If possible) it is necessary to change the server A server B in host names. During installation, the FQN to the server host names have been used.

  The procedure for changing the DB server host name is clear and simple. The question is on the server of the IOM.

  Unfortunately, I did find the documents that describe the process of change for the IOM system hostname. But fortunately the problem has been resolved.

  Shortly, the process is as follows:

  1. in my case: db oracle 11.2, wls 10.3.6, iam 11.1.2.1.0, soa 11.1.6. System - DB Server + server of IOM.

  2 VMS when copied to the new server.

  3. change the configuration files of MAC, IP, two servers.

  4. change the host name of the DB server. Restore the dbconsole EM repository (if used).

  5. change the IOM servers configuration with wlst listeners.

  6. change the source URL with wlst database IOM.

  7 remove the cache, tmp, newspapers of servers.

  8. replace all references to the old hostname with the new host name in the configuration files.

  9 start the administration server. Change in $DOMAIN_HOME/servers/AdminServer/tmp/_WL_user/em/hsz5x1/META-INF/emoms.properties configuration file

  10. restart Admin, start managed servers.

  11 change DirectDB, OimFrontEndURL, BackOfficeURL, Rmiurl SOA Soapurl URL in MS (change management of the cycle of life-11 g Release 2 (11.1.2.1.0) management), urls detail task human workflow.

  12. check the application code for direct reference for host name, change.

• How to change the 11.2.0.3 name of the cluster

  Hello

  By mistake I gave a false name to the 11.2.0.3 cluster (grid) during the time of installation. Now I want to change the name of the cluster, you wonder if any body can help me by sharing the steps to change the name of the cluster.

  Thank you

  Mahi

  I'm not sure I've fallen on such a command or procedure to change the name of the cluster after installation. Oracle has documented the change of the name of RAC 11.2 SCAN if I'm not mistaken. To change the name of the cluster, you must reinstall with the new name. Maybe I'm missing something too then wait for others to reply as well.

  Aman...

• The Dell Openmanager on Esxi5 server administrator

  Guys,

  I'm having problems installing software from Dell (Dell OpenManage Server Administrator) in one of our servers that use a VMWare Esxi 5.0 operating system
  
  Dell OpenManage is a software management that allows a proactive monitoring, diagnostics, and notifications on the server hardware.

  I'm following the procedure indicated by the Dell documentation:
  http://media.community.Dell.com/en/DTC/attach/omsa6.5%20For%20esxi5_kb.PDF
  starting on page 13 (installation of Server Administrator for ESXi).

  In the manual, we have 2 ways to do this:

  1. using the vSphere CLI

  After it we have this result:

  C:\Program VMware vSphere CLI > esxcli - Server x.x.x.x vib software install/var/log/vmware/Dell_ d

  OpenManage_ESXi_OM650-offline_bundle - 467660.zip
  Enter the user name: root
  Enter password: *.
  Result of the installation
  Message: host is not changed.
  Restart required: false
  VIBs installed:
  VIBs deleted:
  VIBs skipped: Dell_bootbank_OpenManage_6.5 - 0000

  No changes were made.

  
  2 - using the VMware vSphere Management Assistant

  Again, we have the same result:

  Enter the user name: root
  Enter password: *.
  Result of the installation
  Message: host is not changed.
  Restart required: false
  VIBs installed:
  VIBs deleted:
  VIBs skipped: Dell_bootbank_OpenManage_6.5 - 0000

  Anyone has any idea on what could prevent installation VIB? Attached is the installation package.

  Hello

  Please check out the original VIb file and you'll get another VIB file inside by the name Dell_OpenManage_ESXi500_OM700-offline_bundle - 643291.zip.

  Using the vSphere CLI

  1 copy the Dell_OpenManage_ESXi500_OM700 - offline_bundle - 643291.zip
  file to the var/log/vmware/Dell_OpenManage_ESXi500_OM700-offline_bundle-643291.zip.

  2 close all comments on the ESXi host operating systems and run the ESXi
  host in maintenance mode.

  3. If you are using Windows, go to the directory where the vSphere CLI
  utilities is installed and run the above command
  to step 4.
  If you are using vSphere CLI on Linux, run the command in step 4 of
  any directory.

  4. run the following command:
  esxcli - Server
  install software vib d/var/log/vmware /.<>
  OpenManage file >

  5. type the username root and the password of the ESXi host when you are prompted.
  The output of the command shows a successful update.

  6. restart the ESXi host system.

  Use software esxcli software esxcli or get vib vib list to confirm the installation.