The Dell Openmanager on Esxi5 server administrator

Similar Questions

• How to disable the display of a display server administrator

  Simple question, but found nothing on how to do it.

  I would like to disable the/admin admin display on some of my display server.

  If anyone knows how to do this...

  Thanks in advance.

  You could...

  Rename the admin folder and the admin.war file to the following location.

  c:\Program View\Server\broker\webapps VMware

  Although, I'm not if there will be any adverse affect now.

  This is where ther Web server seeks files swf and Web pages.

  I would test it in a b4 first dev/TST env make production.

  I assume that it would be an unsupported configuration.

  Larry B.

• ESX 4 and IPMI / Dell OpenManage Server Administrator

  Does anyone else use the Dell OpenManage Server Administrator software on their ESX host?

  I do a cleaning/new ESX 4 installation on a Dell PowerEdge R900 server.  I installed the OMSA without error, but when you try to start the service, you get a "driver ipmi departure: "message. "  The web interface is running, but he tells no hardware information.

  She acts as IPMI is not installed at all, but shows an RPM query:

  VMware-ESX-drivers-IPMI-IPMI-msghandler-400.39.1vmw-1.0.4.164009
  VMware-ESX-drivers-IPMI-IPMI-si-DRV-400.39.1vmw-1.0.4.164009
  VMware-ESX-drivers-IPMI-IPMI-devintf-400.39.1vmw-1.0.4.164009

  srvadmin-ipmi - 5.5.0 - 364.DUP (appears after you run the install OMSA)

  I tried to install using the srvadmin script OpenIPMI - openipmi.sh and get:

  Status: OpenIPMI driver Module is not loaded in the kernel.
  Recommended action: If OpenIPMI modules are available on the system.
  Run "modprobe' command to add the kernel modules.

  I looked in ' / lib/modules/2.6.18-128.ESX/kernel/drivers/ ' for a modprobe IPMI driver, but can't find.

  ANBODY have any ideas on where to go from here?

  We have confirmed with Dell a few months previously, 6.0.3 required for ESX 4 classic, due out within 30 days of the release of GA of ESX 4 classic.  So I'd wait for 6.0.3 unless it is already available.  Dell said that they expected to be interrupted as soon as GA.

• Installing dell openmanage 6.1 on esxi 4.0 (released).

  I noticed that dell management is available for download:

  Dell OpenManage VIB for ESXi 4.0

  http://support.Dell.com/support/downloads/download.aspx?c=us & l = in & s = gen & releaseid = R227503 & SystemID = PWE_R905 & servicetag = & os = ESXi & osl = in & deviceid = 21859 & devlib = 0 & typecnt = 0 & vercnt = 1 & catid = 1 & impid =-1 & formatcnt = 1 & libid = 36 & 326356 = starts

  On the directions of installation, it lists:

  Customized for oem-dell-openmanage - esxi_6.1 - 0000.zip instructions:

  ##################

  1) download the appropriate package of RCLI (Remote Command Line Interface) of http://www.vmware.com/download/ If your system runs on Microsoft Windows or Linux.

  (2) copy the Dell OpenManage bundle into a directory on your system.

  (3) use the vihostupdate command. If you use Microsoft Windows, navigate to the folder where you installed the RCLI utilities to use this command. If you use Linux, this command is installed when you install the RPM RCLI.

  (4) run the command Vihostupdate - Server-I - b.

  (5) the output of the command shows a success or a failure update.

  You must enable OEM CIM providers on VMware ESXi 4 system after installing Dell OpenManage package to manage a system with Dell OpenManage Server Administrator.

  With vSphere Client to allow CIM OEM suppliers:

  To allow CIM OEM suppliers using VMware vSphere Client, you must have the vSphere Client tool installed. You can download and install the tool of http://where is the IP address of the VMware ESXi system 4

  To activate OEM CIM providers on the vSphere Client VMware ESXi 4 system:

  (1) log on to the VMware ESXi 4 system where vSphere Client is installed.

  2) click on the Configuration tab.

  (3) pursuant to the software section on the left side, click Advanced settings.

  (4) in the Advanced Settings dialog box, click on 'UserVars' on the left pane.

  (5) change the value of the field "CIMOEMProvidersEnabled" 1.

  6) click OK.

  (7) reboot your system for the change to take effect. Use the summary in vSphere Client tab to restart the system.

  ##################

  So I downloaded the zip file.

  Put the system into maintenance.

  Attempt to update via vihostupdate.pl, which gives the error:

  e:\oem-Dell-OpenManage-esxi_6.1-0000.zip unpacking...

  Metadata.zip.SIG does not exist

  signature mismatch: metadata.zip

  Unable to decompress the package update.

  I checked that the zip files are valid.

  I'm patching of a windows 2003 System. I'm under esxi build 175625.

  Ideas?

  It seems that the cim hp patch has the same question:

  http://communities.VMware.com/message/1307359#1307359

  Nice to hear that

• Dell OpenManage Server Administrator 6.0.3 and ESXi 4

  I try to install Dell OpenManage Server Administrator version 6.0.3. I managed to install this sub ESXi 3.5 update 4. It says in the instructions activate OEM CIM providers by setting Misc.CimOemProvidersEnabled to 1. Misc.CimOemProvidersEnabled is supposed to be located under various advanced however, ESXi 4 is not. Anyone know where the moved the option or y at - it a new way to activate this feature with ESXi 4?

  You do not install agents on ESXi directly, they will come in the injected code of VMware/Dell as a variant of ESXi.  Indeed they are not installable on ESXi end-user.  HP already has similar variant for ESXi 3.5.  But to my knowledge, no hardware vendor has ESXi 4 variants yet out.

• PowerEdge T310 - install second disc as raid1 with dell server administration software?

  Hi all

  Quick question - we have a PowerEdge T310 with a disk in it. We want to install a second drive and put them in raid1. Issues related to the:

  1. Can we use software from dell server administrator to do?
  2. This will delete the volume on the current drive.

  In a perfect scenario, we want to just install the second disk, set up in raid 1 and call it a day.

  Thanks for the tips!

  1. Yes.

  2. function:

  If your drive is existing in a single drive RAID 0, so it CAN be converted on the fly to a 2 drive RAID 1.

  If your existing drive is a volume not RAID, she cannot be converted on the fly without loss of data.

  The SAS 6/iR and series S PERC H200 supported RAID and non RAID, so the chances of a disk being a RAID 0 array is extremely low.

  PERC 6 / i and H700 do not support no RAID, for a single disc can only be a RAID 0, so convert to RAID 1 is fine.

• [Problem] SNMP on the Dell Server

  Hi all

  I am currently managing a lot of Dell servers: M620 R720, M610, R610, r.620... I use SNMP to collect information from my servers. I have some problems with SNMP:

  I have setuped a collector (CentOS) server and the MIB file complete (10892, sotragemanagement, SMIv2-iDRAC, iDRAC-SMIv1...), using snmpwalk to collect information of agent (CentOS). On the agent server, I already have setuped OMSA agent, full mibs (10892, sotragemanagement, SMIv2-iDRAC, iDRAC-SMIv1...) and all the services work properly:

  status of /etc/init.d/dataeng # [root@agent MIB]
  dsm_sa_datamgrd (43827 43770 pid) is running
  dsm_sa_eventmgrd (pid 43879) is running
  dsm_sa_snmpd (pid 43938) is running

  * From collector server, I used the command:

  [root@collector~]# snmpwalk-v2c IP - c Mi725005d1 1.3.6.1.4.1.674.10892.1

  MIB-Dell - 10892:mIBMajorVersionNumber.0 = INTEGER: 7
  MIB-Dell - 10892:mIBMinorVersionNumber.0 = INTEGER: 3
  MIB-Dell - 10892:mIBMaintenanceVersionNumber.0 = INTEGER: 0
  MIB-Dell - 10892:systemManagementSoftwareName.0 = STRING: "administrator of the server.
  MIB-Dell - 10892:systemManagementSoftwareVersionNumberName.0 = STRING: "7.3.0.
  MIB-Dell - 10892:systemManagementSoftwareBuildNumber.0 = INTEGER: 1

  ........

  -> OK for 10892 mib

  * It's OK with 10893 mib (storage management).

  * But when I used ooid to iDRAC-SMIv2 mib, iDRAC-SMIv1 mib, it wasn't OK

  [root@collector ~] # snmpwalk m all - v2c IP - c Mi725005d1 1.3.6.1.4.1.674.10892.5
  IDRAC-MIB - SMIv2:outOfBandGroup = No. Such Object available on the agent to this OID
  [root@collector ~] # snmpwalk m all - v2c IP - c Mi725005d1 1.3.6.1.4.1.674.10892.4
  IDRAC-MIB - SMIv2:server3.4 = No. Such Object available on the agent to this OID

  Can someone help me with this problems?

  Thank you very much

  Nampnx

  Hello Nampnx

  Are all the other OID of work or their absence from the out-of-band DIO works?

  10892.5 does not have an OID assigned to him. It's just a group, the message cannot find an OID so that it is normal. I also do not show 10892.4 as valid an OID.

  Do you have a valid return with:

  Group Information RAC
  Group of RAC Information objects provide information on iDRAC.

  Table 2023.

  Name of the CAR

  Name racName

  ID of the 1.3.6.1.4.1.674.10892.5.1.1.1.0 object

  Description this attribute sets the name of the product of a remote access card. The StringType read only access syntax

  Or this:

  Table of 1973.

  Message ID

  AlertMsgID of variable name

  ID of the 1.3.6.1.4.1.674.10892.4.5000.10.7 object

  Description Specifies the message ID improved for the object generating the alert. Syntax DisplayString

  http://FTP.Dell.com/manuals/all-products/esuprt_software/esuprt_ent_sys_mgmt/esuprt_ent_sys_mgmt_opnmng_svr_admin/Dell-opnmang-Srvr-Admin-v7.4_Reference%20Guide3_en-us.PDF

  Thank you

• ESXi on T610 and OpenManage Server Administrator on windows

  Dears

  I have Power edge T610 hosted ESXi 4.1 and I need gale HW on network via OpenManage Server Administrator is installed on the Windows machine, I need to know that it is OK or not:

  If it works: what the user name and password to log on give

  otherwise: how I can eat the server HW

  Moharafa,

  I sent you an email with a detailed itinerary, which you can use to install Open manage with ESXi.

  I would like to know if that's what you're looking for.

• Unable to save the Page as that received the error "ga.js could not be saved, because the source file could not be read." Try again later or contact the server administrator.

  Unable to save the Page as that received the error "... ga.js could not be saved, because the impossible source file read try again later, or contact the server administrator.

  You have installed the Ghostery add-on or something similar?
  It can block Google analytic and .js file could not be read.

• "The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. »

  Hello

  I received the following error message

  "The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. »

  This happens when I try to log on my remote on the icon access log, I put on my computer at home so that I can get to work if I need to.  He worked for a few months after I bought my new laptop and software, but now suddenly it doesn't.  I talked to my guy TI in the work and they seem to think it's a common problem with "Vista Home Premium", I can do to change it so that I can use the remote access icon?

  Thanks in advance

  Hello
   
  Licensing protocol handles the communication of information on licenses between your computer and the remote computer. If there is an error in the licensing protocol, your computer may not be connected to the remote computer.
   
  To resolve this problem, restart the computer and try connecting to the remote computer. If you continue to receive this error message, contact the server administrator.
   
  This also occurs if one of the registry entries is corrupt. Try the following steps to resolve this problem.
  1. Click Start, type regedit and press to enter.
  2. on the window of the registry editor, navigate to Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\MSLicensing
  3. right click MSLicensing, click on export and provide a file name for example RemoteKeyBackup and click on save to the desktop.
  4. right click on the HardwareID key and store under MSLicensing folder and click on delete.
  5 restart the computer for changes to take effect. Restarting the computer will create new keys.
   
  NOTE: If the problem persists, then you can take backup of the MSLicensing registry key and to load it on the computer of the problem, this will fix the problem.
   
  Visit this link for more information:
  http://TechNet.Microsoft.com/en-us/library/cc756826 (WS.10) .aspx
   
  Important: Incorrectly editing the registry can cause serious problems on the computer.
  Back up the registry: http://windows.microsoft.com/en-us/windows7/Back-up-the-registry
   
  Try the steps and check the result.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Not able to install a driver downloaded from the dell website get the message "you must have administrator rights to complete this operation".

  Original title: request administrator access but already an administrator!
   
  Hello
  My Dell inspiron 1440 laptop has intel gm 45 carte_video. I downloaded the driver from the dell website. But whenever I want to install this driver according to halfway, it displays error and say you must have administrator rights to perform this action. But I'm already administrator. I tried right click and press run as administrator. I tried safe mode. I don't have a single account in my laptop. This shows administrator account and I do not have any password for my administrator account. None of my efforts working!. I'm using Vista premium service pack 2. any help from anyone? It would be helpful if someone can give suggestions. Thank you

  Hello

  This must be different. Rest assured that we would do our best to help you with this problem.

  Please answer the question that helps us provide a better solution.

  Were there any changes made to the computer before the question?

  Try these steps and check:

  Step 1:

  Run a virus scanner and check:

  Viruses are known to cause these problems. Scan your computer for the Microsoft Security Scanner, which allows to get rid of viruses, spyware and software malware.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner expire after 10 days from the date of installation.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Step 2:

  There might be corruption of the possible user profiles that may cause this problem. Therefore, try to create a new user account and check if this solves the problem.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Step 3:

  You can try to download the video driver again on the dell site or check out the following link and check out the video at the following link and try to download the dell driver if you are having problems with the display.

  http://www.Dell.com/support/drivers/US/en/19/Product/Inspiron-1440?~SRD = true & sk = drivers & scat = sup

  Note:  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information helps. If you have any questions do not hesitate to answer, we would be happy to help.

• OpenManage Server Administrator on Windows 2000 Advanced Server

  Hello

  When I try to install server administrator on a Windows 2000 Advanced Server 5.4, I get this error message:

  "The prior audit tool reported a failure for all the features. Installation cannot continue. »

  No idea what this means?

  Thank you very much.

  Kind regards

  Eric

  
  

• Unable to connect to the server administration Serengeti

  I am building a test for BDE configuration, and now I'm stuck with a problem.

  Problem: Unable to connect to the administration server Serengeti using BDE plugin in the Web Client. After you select the management server in Serengeti, when I click on OK, I get an error message "Connection Failed!". Screenshot of the error is attached.

  Things I've tried so far:

  1. I tried using IE, Firefox, but I get the same error.

  2 uninstall the plugin BDE, re-installed, but still the same problem

  3. DNS resolution works quite well.

  4. I am able to ping to/from all possible directions

  5. the VAPP has been deployed with the resources box initialize verified. In addition, SSO registration was made

  6. have you deployed nine VAPP a few times, but still the same problem.

  7. when VAPP is deployed without SSO registration, I can connect using Serengeti CLI, but of the Web Client, I always get the same question. Strangely, SSO 19.ne recording enabled, I can't to Serengeti CLI as well.

  8. as in the other posts, ran < EnableSSOAuth > command and restart the Tomcat service. Always the same question.

  9. have you restarted SSO, VC, paralytic, but not luck.

  Excerpt from the server logs Serengeti is below:

  [root@bigdata ~] # tail-f /opt/serengeti/logs/serengeti.log

  at org.apache.coyote.http11.Http11Protocol$ Http11ConnectionHandler.process (Http11Protocol.java:588)
  to org.apache.tomcat.util.net.JIoEndpoint$ Worker.run (JIoEndpoint.java:489)
  at java.lang.Thread.run(Thread.java:636)
  2013 05 August at 21:01:11, 245 + 0000 INFO http-8080-3 | com.vmware.vim.sso.client.impl.SecurityTokenServiceImpl$ RequestResponseProcessor: ask the message has expired. Server message: ns0:MessageExpired: request timed out
  2013 05 August at 21:01:11, 245 + 0000 INFO http-8080-3 | com.vmware.vim.sso.client.impl.SecurityTokenServiceImpl$ RequestResponseProcessor: server returned "expired query" less than 0 seconds after application has been published, but it should not be expired at least 600 seconds.
  2013 05 August at 21:01:11, 245 + 0000 ERROR http-8080-3 | com.vmware.bdd.security.sso.utils.SecurityUtils: could not validate the token by sso: server returned "expired query" less than 0 seconds after application has been published, but it should not be expired at least 600 seconds.

  [root@bigdata ~] # tail-f /opt/serengeti/logs/vhm.log

  [root@bigdata ~] # tail-f /opt/serengeti/logs/vhm.log

  21:22:19.878 05 August 2013 [ClusterSCL_Poll_Thread-VcVlsi] No. found clusters for hadoop UUID SERENGETI-VAPP-BDEvApp

  21:22:19.878 August 05, 2013 [ClusterSCL_Poll_Thread-ChangeListener] temporarily lost the connection to the CR...

  21:22:24.988 05 August 2013 [ClusterSCL_Poll_Thread-VcVlsi] No. found clusters for hadoop UUID SERENGETI-VAPP-BDEvApp

  21:22:24.988 August 05, 2013 [ClusterSCL_Poll_Thread-ChangeListener] temporarily lost the connection to the CR...

  21:22:30.98 05 August 2013 [ClusterSCL_Poll_Thread-VcVlsi] No. found clusters for hadoop UUID SERENGETI-VAPP-BDEvApp

  21:22:30.99 August 05, 2013 [ClusterSCL_Poll_Thread-ChangeListener] temporarily lost the connection to the CR...

  Has anyone seen this problem?

  Kind regards

  Nitin Gupta

  
  

  I saw the log says "com.vmware.vim.sso.client.impl.SecurityTokenServiceImpl$ RequestResponseProcessor: server returned 'query' expired less than 0 seconds after application has been published, but it should not be expired for 600 seconds at least." for these connection request. " According to Ko to http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2038086

  You may need to update the vc server local time. Please have a try on this KB and see if it works.

  Thank you

  Jun

• EMP set 11.1.2.3 updated cannot be configured by using the 0 server administrator

  Hi guys

  I have updated to a Hyperion EPM 11.1.2.1 to 11.1.2.3 System. When I run the EMP pressed I choose deploy to server applications using the same domain EMP EPMSystem,.

  However, when I see the web application to deploy that I saw that he's using and < Name_AdminServer1 > instead of f < Name_AdminServer0 > that exists.

  This is on windows and the variables that was * EPM_ORACLE_HOME, * EPM_ORACLE_INSTANCE.

  So please, any help or suggestion will be appreciated.

  Thanks in advance.

  Are you able to see the HFM Application in the workspace? You can save the workspace request by going to administration-> classic Application Administration-> register request.

  Thank you

  Santy.

• Create the new existing server administrator / Application

  Hello
  
  
  Can someone help me with how to assign rights to a new user who I want to have full administrator rights to an existing Server / Application.
  
  I have configured 11.1.2.2 with security SSP based Essbase.
  
  I tried to affect the level of cluster Administrator and the application of level Application Manager but when I log in PARTY under this user, I do not see the existing server or the existing application, I only get administrator rights to create new ones - is there a way to get around this?
  
  
  
  Thank you
  
  Robert.

  Do not just with the right button on the Essbase servers node, and then add the new Essbase with Single Sign-On Server, and then you will see everything? I think that EAS is always like that, regardless of what rights you got in SS.