Processes that run automatically

Similar Questions

• Port is too long that the process that runs on there

  Platforms: 11.2.0.3 on AIX/Linux/Solaris
  
  This is a question about how software Oracle maintains sessions client connected after that the listener is stopped with elegance
  
  
  Scenario of
  =========
  You have a DB and its listener running on the DB server. The listener runs on port 3278.
  From your laptop, you start a sqlplus session to through the listener. After the session must be connected to the laptop. The process of listening to the DB server is reduced. But sql * more session connected to the laptop can still issue queries and get the results.sqlplus session is still connected to the DB via port 3728, even if the listener is down. ESTABLISHED for that port displays the following output of netstat on the Server DB (10.80.0.213)

  $ netstat -an | grep 3728
  10.80.0.213.3728   192.168.0.101.59001  17520    881 49640      0 ESTABLISHED

  A TCP/IP Port exists only when the process that runs / plays on it is. Right? Thus, after the listener is brought back is there another process that maintains this port so that the client session is served with what he needs the DB?
  
  As far as I KNOW, none of the two processes can share a port. Unless there is a mechanism in the listener that calls the port to another process, when it is worn down.

  Hello
  I think that explains very well at a level detailed - the way he manages the ports has changed slightly in the new versions of oracle - lsof does not look like it can in older versions.

  http://packetpushers.NET/SQLNET-a-k-a-Oracle-TNS-and-firewalls/

  See you soon,.
  Harry

• How to call a process that runs in another engine

  Hi all
  
  I looked through the 10.3.1 OBPM docs, I found "Subflow activity" and "Business process" can invoke a process that runs in another engine. But in the studio OBPM, I find not all the properties of these two activities to set up this feature.
  
  Any ideas? Thanks in advance.
  
  Best regards
  Bill

  Hi Bill,
  In addition to the above, you may consider using process Interfaces, you can define an interface to process in a project and import it into another project to simulate its execution by the way and receive arguments, after when you deploy business interfaces are not published and are substituted by real projects located in tha other project.
  HTH

• I seem to have in dual processes that run in the Task Manager.

  In the Task Manager, I see the same process running several times.  Example: under user/Admin""(My name as) ","Local Service","Network Service"and"System"." "  These really duplicates and they slow down my system?

  Are they duplicates?  Perhaps.

  They slow down your computer?  Depends on what you're trying to do.  Anything that takes your resources take the pool available for other applications.  However, if you do not run low on resources (your CPU has a lot of horses for what is needed and you're not missing memory for most) - then it probably isn't as much of a downturn as just all of the resources actually get used.  You won't slow until that run out you of resources and try to open something else.

  If you worry about it?  N ° except if you have been compromised (you have a virus, worm, Trojan horse, malware any) and this is what is running - the system is as it should.  You are not running a single-user system - even if you are the only physical user.  Service accounts, etc. are there for the functionality of the machine as a whole.

  Windows XP...?

  I have some tips that might help you optimize this system...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 7 and 10 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

• How to stop programs that run automatically at startup?

  Hi I just wanted to know how to stop programs from running automatically at startup, I already ran msconfig and disabled programs that I don't want to run at startup and it always automatically start also on msconfig, it indicates the applications that I don't want to run at startup is disabled and it always runs at startup. The programs that I don't want to run at startup are tom tom home and bbc iplayer desktop, but he always runs at startup.

  One other thing is when I install new programs, that they automatically run at startup without my permission.

  Palcouk did preferred proposals. Another way to identify which loads when you start using Autoruns (freeware from Microsoft).
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.

  A useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• processes that run on the db Server

  customer asked > I need to know what processes were running on servers of DB xyz between 17:00 and 21:00 last night.
  
  Any request for this?

  DBA2008,

  Sorry, perhaps fault and that she should be;

  select * from v$session as of timestamp sysdate-5/24;
  

  Ogan

• Programs that run automatically at startup

  Please explain to me 2 what the goal & 1 duty. If I disable a program run frm'g to start what it means? What happen 2 the program? Can I still use it at some point after? If so, how? I'm totally confused here? Say I disable Java to run'g at the start, I am wk 'g on comp. awhile later I need - because she is disabled to run' g to start it now does not work? I am an older generation of person non-comp & totally confused! Please help I'm Cryin ' & Cryin '...

  Hi camolentot,
  For a programme of work, it must be started. Programs are started in three ways.
  1. the first is if actually start you yourself by throwing it
  2. the second way is for other programs start another program.
  3. the third way is a program be configured to start automatically when the operating system starts. The type of programs that start through the third way are what we call the Windows startup programs
  The third type programs can be of the following types.
  * Some programs are needed for the operating system to operate correctly
  * Some programs, it is not necessary to run as it can be launched if necessary.
  You can change the programs such as messengers or software that you think that it is not necessary to run at the beginning. But it's not good tweaking all train backup software or security data. Its better to take help among people with knowledge about this program before tweaking start-up businesses.
  Tweaking unnecessary startups can speed up your PC. But tweaking bad programs\services can cause problems too.

• Reports that run "Generating Report. Please wait... "forever

  Does anyone else have this problem?  I have several reports that when they contain a lot of data, run forever, and I never get the report.

  For me, this isn't a bug. But I'm picky like that. In 6.5.1 vFoglight (Foglight core 5.5.8) all report/view/process that runs longer than 5 minutes are killed by the kernel Foglight engine. It is a mechanisim of security to kill the process of "thugs."  I recommend you research that vFoglight infrastructure. I solved this problem for many customers to set up the database server or vFoglight for a better response. We'll find out why it takes so long for the execution of the report. Also if you try 'Generate report' planning report. The option 'Generate report' maintains a link between the client and the host vFoglight and the connection may time out. The report may have been generated, but your connection to vFoglight host has been lost.

  VFoglight 6.6 resolution is to show a progress bar with more advanced user. I don't know if the 5 minute limit has been developed. So if the underlying infrastructure is to have the relationship may not always work.

• Erased all messages in my Inbox except 1 that I can't remove. ERR mess says disk is full, but I can't compact bec he told one another process is running

  An old message is stuck in my Inbox. No matter what I do it not delete and I can no longer receive email on this computer because I get this message: there is not enough disk space to download new messages. Try to delete old messages, empty the deleted folder and compacting of your e-mail folders, and then try again. I erased my delete and send files and greatly reduced my folders, but the same situation applies. I tried to compact manually, but then I get the message that it can not compact as another process is running. However, on my iphone, or on another computer, I can still get an email update.

  try to take the file offline Thunderbird (Alt + F) menu > offline > workoffline
  Close Thunderbird
  Restart your computer
  Restart Thunderbird and try compacting while Thunderbird is still offline.

• Several processes that are running on the standard user account because it runs slow and internet does not "."

  Create a user profile for children on PC 32-bit W7 with MS Family Safety.

  Recently they have complained he "runs slow and internet does not work.

  After playing for a little, I realized a ton of processes were running in the background. I couldn't run msconfig to their profile (not administrator) and after some research, I even if the profile has been corrupted.

  I created a new profile, but now the same thing is happening a few days later.

  See below; multiple copies of the same process are running. This happens within 2 m after the log-in and I only started one program.

  I started in safe mode with network and ran Windows defender, Spybot S & D and my virus scanner (all full scans) and turned up nothing malicious.  A few cookies tracking in the web cache, but nothing out of the ordinary.  I searched for the files wlaacmgr.exe and dplaysvr.exe (b/c they do not appear running in my admin profile) but they were found only in windows OS directories.  I understand that they are files of W7 but some maleware recreates.

  Many of them are the same files taking up process on the old profile that I deleted.

  Any help or suggestion as to why I have multiple copies of large processes running on the machine?  As I wrote it, I sign in, seems to be fine for one but 2 minutes a lot of process appear repeatedly and slows down the computer to a crawl.

  These two files listed are not at all on my admin profile and the machine works fine in my admin profile.  Even with open Photoshop, the CPU is only about 50% under my profile.

  Try to check/change the entries in startup with Autoruns from Sysinternals, which should work on the limited account to see its startup items.

• Microsoft Management Console error: this function is not supported on this system. Also noticed that the automatic updates did not install it and returned error 80070005.

  Original title: Microsoft Management Console this feature only is not supported on this system

  I am running Vista 32 bit Business since an administrator account.

  Recently, I noticed that the automatic updates did not install it and returned error 80070005.   After investigation, I found that I could not open mmc at all and always get the message "this function no is not supported on this system.  No major changes have been made to the configuration to trigger it and I can't watch the event log because it is in the MMC.
  I have studied this question in line and tool the following actions, which none worked:
  carried out a complete antivirus scan (I use Commodo internet security)
  created another account administrator
  has run SFC (no problem)
  has run the registry cleaner (no problem)
  has run msconfig.exe and disabled all the startup process
  updated windows right click and run as administrator
  Started in safe mode and tried all above
  After that, I don't know where to go... it doesn't seem to be a download for Windows vista to reinstall mmc.
  I have about 50 updates critical, sitting in my windows update that can not install because of this problem.  Can anyone help?
  Jeff

  Hello Helpmehelpme,

  First, I would check since it is professional Vista was that computer on a field of work or it was already on an area of work? There may be group policies that are in place that prevent to run MMC.

  When did start to happening? Is there anything new on the system which has been introduced into the environment (software, hardware)?

  This thread gives a few steps trying to the original poster that you can't have.

• How to disable programs and commissioning that run when you start Windows 7

  How to disable programs and commissioning that run when you start Windows 7

  Hello

  References to Vista also apply to Windows 7.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at stored by -
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.

  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns shows you the complete list of
  Locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  Monitor Monitor - free - file system, registry, process, thread and
  Activity of the DLL in real-time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Set time interval for sub query runs automatically to every 5 minutes

  Hello

  Pls refer the below query, that query set a time interval to process or run this query automatically in every 5 minutes.

  Help me...!!!

  Declare

  l_recid varchar2 (100);

  Cursor c1 is

  Select a.recid a,f_ac_event@abnprod f_ac_event b where a.RecId = b.recid;

  Begin

  Open c1;

  loop

  Fetch c1 in l_recid;

  Remove from f_ac_event
  where recid = l_recid;

  When exit c1% notfound;

  End loop;

  Close c1;

  End;

  /

  ------------------------------------------------------------------------------(or)-----------------------------------------------------------------------------------------------------

  remove from f_ac_event
  where recid in (select x.recid in the f_ac_event@abnprod x);

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------

  Kind regards

  Villa

  Hi all

  Thanks for all your ideas, I do appreciate you all, finally, I implemented the Planner below to build a procedure:

  Start

  DBMS_SCHEDULER. () CREATE_JOB

  job_name-online "Task1.

  job_type-online "PLSQL_BLOCK."

  JOB_ACTION => ' BEGIN p1; END;',

  start_date => SYSDATE,

  repeat_interval => 'FREQ=MINUTELY; ',

  End_date => NULL,

  -Online TRUE, enabled

  comments => ' * any * comments ');

  end;

  /

  Villa,

• Stopping Statspack snap to run automatically

  Hi all
  
  
  The snap-snap-in statspack is run automatically every 15 minutes. I want to stop this process.
  

  SQL> select * from user_jobs;
  
  no rows selected

  column begin_interval_time format A25
  column END_interval_time format A25
  
  SELECT snap_id, begin_interval_time, end_interval_time
  FROM dba_hist_snapshot
  ORDER BY 1
  /
  
     SNAP_ID BEGIN_INTERVAL_TIME       END_INTERVAL_TIME
  ---------- ------------------------- -------------------------
         205 05-OCT-12 11.30.55.051 AM 05-OCT-12 11.45.07.392 AM
         206 05-OCT-12 11.45.07.392 AM 05-OCT-12 12.00.07.900 PM
         207 05-OCT-12 12.00.07.900 PM 05-OCT-12 12.15.08.347 PM
         208 05-OCT-12 12.15.08.347 PM 05-OCT-12 12.30.08.808 PM
         209 05-OCT-12 12.30.08.808 PM 05-OCT-12 12.45.09.325 PM
         210 05-OCT-12 12.45.09.325 PM 05-OCT-12 01.00.09.806 PM
         211 05-OCT-12 01.00.09.806 PM 05-OCT-12 01.15.10.277 PM
         212 05-OCT-12 01.15.10.277 PM 05-OCT-12 01.30.01.823 PM
         213 05-OCT-12 01.30.01.823 PM 05-OCT-12 01.45.01.743 PM

  How to stop the snap taken automatically statspack?

  Madhu.149 wrote:
  Hi all

  The snap-snap-in statspack is run automatically every 15 minutes. I want to stop this process.

  >

  How to stop the snap taken automatically statspack?

  Then you created the work with the code I gave you to Reg: Statspack annex ?

  If so, you can drop the work with

  begin
   DBMS_SCHEDULER.drop_job (job_name => 'STATSPACK_SNAPSHOTS');
  end;
  /
  

  In addition, if so, I would say that when someone gives you a code, you take advantage for your own studies. You should go to the reference manual and learn about DBMS_SCHEDULER. Learn more about all of the views associated that give information on scheduled tasks.

• Plan the work that runs according to max date in the source to create table

  Hi all
  
  I am trying to create an automation in my sql. Basically, I have a table I do reporting and analysis on which is a subset of records from a source table. For the purposes of this example, I called the source table "src_table" and my table as the target table, "tgt_table." Essentially the source table gets updated with a value again months from date (founded order_dt) and I have a procedure I call when the source table is updated to load the value of the new month of records in my target table. So let say June 2012 data is loaded in the source table, I call my procedure that has a date parameter and enter June 2012 as the point of departure date so that it looks for new records in the source table from June 1, 2012 and load it into my target table. For variety reasons I won't get in, my goal in a position is not a view, there must be a stand alone table. The problem is that the source never table gets updated at the same speed interval... sometimes they will load a new months of data at the beginning of the following month, sometimes medium of the month... sometimes I have to wait a few months to get another month of data. So, whenever I get a email notification telling me another month of data is loaded in the source table, I have a windows batch file that runs my setting... I just have to change the start date (based on the order_dt column) and run it. I want to do is automate the process so that I did not yet do. What do I think creates a task that runs every day or even at the end of each month, this work has basically seized the date of maximum order of the source table and if the date of the order is greater than the maximum order date in my target table, it runs my procedure that loads the new month with a value of data in my target table. Thus, for example, my maximum order of my target table date is May 31, 2012. The work runs at a certain period of time and check the maximum date on the source table, if the maximum date is May 31 nothing happens... new data has not been loaded so does not perform the procedure. If the maximum date on the source table is June 30, 2012, the maximum date is greater than the maximum in my table target date so that the procedure runs. I need also the procedure to insert records into the table in the source where the order date in the source table is > = at the time of maximum order in the target table.
  
  In a Word, this is what I need but I'm not sure how to put in place. The procedure works fine... all I need is an interim procedure that runs as a scheduled task every x number of days and the date of maximum order check on the source table if it exceeds the maximum order on my table of target date it runs my procedure. My procedure is called "insert_new_orders" and when I run it I run it like:
  
  execute insert_new_orders('01-jun-2012');
  
  If anyone can help me with what would be great :-)
  
  Thank you
  Ed

  To start:
  You must remove the EXECUTE keyword.