How to call a process that runs in another engine

Similar Questions

• Port is too long that the process that runs on there

  Platforms: 11.2.0.3 on AIX/Linux/Solaris
  
  This is a question about how software Oracle maintains sessions client connected after that the listener is stopped with elegance
  
  
  Scenario of
  =========
  You have a DB and its listener running on the DB server. The listener runs on port 3278.
  From your laptop, you start a sqlplus session to through the listener. After the session must be connected to the laptop. The process of listening to the DB server is reduced. But sql * more session connected to the laptop can still issue queries and get the results.sqlplus session is still connected to the DB via port 3728, even if the listener is down. ESTABLISHED for that port displays the following output of netstat on the Server DB (10.80.0.213)

  $ netstat -an | grep 3728
  10.80.0.213.3728   192.168.0.101.59001  17520    881 49640      0 ESTABLISHED

  A TCP/IP Port exists only when the process that runs / plays on it is. Right? Thus, after the listener is brought back is there another process that maintains this port so that the client session is served with what he needs the DB?
  
  As far as I KNOW, none of the two processes can share a port. Unless there is a mechanism in the listener that calls the port to another process, when it is worn down.

  Hello
  I think that explains very well at a level detailed - the way he manages the ports has changed slightly in the new versions of oracle - lsof does not look like it can in older versions.

  http://packetpushers.NET/SQLNET-a-k-a-Oracle-TNS-and-firewalls/

  See you soon,.
  Harry

• How to find what processes are running on my computer and use it from memory?

  * Original title: find running processes

  How to find what processes are running on my computer and use it from memory?

  You can press Ctrl-Shift-Escape to see which processes are underway and those who is using memory (and how much they use).  Although the memory usage is not as important as how they use lots of CPU, which is what can make your computer slow if there are too many programs use the CPU at the same time.  For memory, even if she says that he uses a lot, an inactive program ' pages on "memory to the hard disk and it frees room for other programs to use, is not as important as the CPU generally (unless you are very very low on memory).

• How to call javascript process?

  Hello!

  I have a button Delete which redirects to url:

  javascript:apex.confirm (htmldb_delete_message,'DELETE_CONFIRM_MSG');
  
  

  And a process that is placed after validation.

  How to call this process, I put the button to zero State and condition the type of request = Expression 1 and tried the two doDelete and confirmDelete in the expression field, but it does not work.

  How can I call the process?

  Hi EgaSega,

  Give you an example, try something like below

  (1) change your page

  Create the javascript function in the HTML header

  (2) of the button calls the javascript function

  action button: "URL redirect".

  Target URL: javascript:f_execProc();

  (3) modify your process

  In Conditions

  When you press the button: no condition button

  Condition type: request = Expression1

  Expression1: REMOVE

  Hope this helps you,

  Kind regards

  Jitendra

• I seem to have in dual processes that run in the Task Manager.

  In the Task Manager, I see the same process running several times.  Example: under user/Admin""(My name as) ","Local Service","Network Service"and"System"." "  These really duplicates and they slow down my system?

  Are they duplicates?  Perhaps.

  They slow down your computer?  Depends on what you're trying to do.  Anything that takes your resources take the pool available for other applications.  However, if you do not run low on resources (your CPU has a lot of horses for what is needed and you're not missing memory for most) - then it probably isn't as much of a downturn as just all of the resources actually get used.  You won't slow until that run out you of resources and try to open something else.

  If you worry about it?  N ° except if you have been compromised (you have a virus, worm, Trojan horse, malware any) and this is what is running - the system is as it should.  You are not running a single-user system - even if you are the only physical user.  Service accounts, etc. are there for the functionality of the machine as a whole.

  Windows XP...?

  I have some tips that might help you optimize this system...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 7 and 10 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

• How to call resuable process BPM of another project?

  Hello
  
  UseCase:
  We have two projects BPM - project1 and project2 into the same request. Project1 has of a reusable BPM process that needs to be accessible via a process inside project2. Is it achievable? If so, please expain how we can do that.
  
  I tried to use CallActivity in process2. But CallActivity only shows the list of processes in the same PROJECT.
  
  Thank you
  Suren.

  It is possible. You must deploy project1. Project1 has a wsdl url now. Copy this wsdl url and call a web service in composite of the project2...

• How to create the generation that run on the device.

  I created a simple application. Now, I want to test this feature and I want to just put the build in Sd Card. So how can I make the executable file for the device. that run in the BlackBerry device.

  Thanks in advance.

  Yes

• How to create a task that runs once a day, immediately after the opening of session?

  Hello, I'm wondering how to create a task using the Task Scheduler that runs once a day, immediately after I have logon.

  The reason is I want to use Bing Desktop to change my wallpaper every day. However, I just want to run the first time I start my computer every day, so it will change the wallpaper. By default, it starts whenever I have to logon. It's annoying, because I just want it to start once a day to change the wallpaper. However, using the Task Scheduler, I put only a trigger to start "at the opening of session' or"once a day." If I choose once per day, it runs about 5-10 min after I login, instead of logon immediately after. If I choose the two triggers, then it starts after each session.

  Basically, I just want the Task Scheduler to launch the program after the connection the first time I connect to the computer on any given day. How can I do this?

  Hello Jeffrey,.

  You can refer to the links below and see if that helps.

  Create a task

  http://TechNet.Microsoft.com/en-us/library/cc720110 (v = WS.10) .aspx

  Modify a scheduled task

  http://TechNet.Microsoft.com/en-us/library/cc778308 (v = WS.10) .aspx

  Change an existing task

  http://TechNet.Microsoft.com/en-us/library/cc766442.aspx

  Please write back to us for assistance and we will be happy to help you come.

  Thank you

• processes that run on the db Server

  customer asked > I need to know what processes were running on servers of DB xyz between 17:00 and 21:00 last night.
  
  Any request for this?

  DBA2008,

  Sorry, perhaps fault and that she should be;

  select * from v$session as of timestamp sysdate-5/24;
  

  Ogan

• Hi friends I want to know how to call a procedure that has values arrary as parameter?

  I have a procedure as shown below, and I am using oracle 11g.

  create or replace procedure procedureName (v_hospital_id in NUMBER,

  v_process_id VARR_VARRY,

  v_cnt OUT NUMBER);

  Now, how to call this procedure from PLSQL. If v_process_id values ('abc123', 'xyz234', 'sfs234')

  Please present the definition of VARR_VARRY

  If it's a simple table of varchar2.

  declare

  v_cnt NUMBER;

  Start

  procedureName (1, VARR_VARRY('abc123','xyz234','sfs234'), v_cnt);

  end;

• How to use the script "click menu item" command on a menu item for an application that runs under another user?

  Hey everyone, quick question...

  I am trying to run this script:

  say application "System events".

  say process of "iTunes."

  click on menu item "Start Station" from the menu 'Song' to menu bar item 'Song' in the menu bar 1

  end say

  end say

  
  

  
  

  The idea behind this is to start a song selected currently playing station. I know, it's not hard to do it manually, but I want to be able to do it without having to call the iTunes app to the front. Now, this script works for my own iTunes app, but I have a second instance of iTunes connecting the second user on my computer at home (User2), with its own separate library and account and all. script I have works fine for an instance of iTunes under my user account, but I can't figure out how to specify which instance of iTunes, I'd like the script to work on.

  
  

  
  

  
  

  I want to emphasize as an FYI that i use.

  
  

  the shell script "connection f User2 /Applications/iTunes.app/Contents/MacOS/iTunes > & - 2 > & - &" with administrator privileges

  -to open my second instance of iTunes as User2

  
  

  
  

  is there a way to change the "process"iTunes"to say" something like 'process 'unix ID' say' and have the ID for each respective instance of iTunes unix?

  
  

  Let me know if I do not make sense... Thanks in advance to anyone who can help

  
  

  
  

  
  

  
  

  
  

  You can target a process of application using various properties of system events, for example:

  tell application "System Events"
    tell first item of (get application processes whose unix id is 15174) -- or whatever id
      activate --> needed when using GUI scripting
      get properties
    end tell
  end tell
  

• How to call one process of another?

  Hello
  
  I created two process and two buttons on a page.
  Button1 runs termpol1.
  Button2 runs Process2, which is supposed to run termpol1 before execution of its own logic.
  
  How can I implement this?
  
  Thank you
  
  Gabor

  Make sure that Process1 has a sequence number less than Process2, then do the condition for the execution of termpol1 PL/SQL Expression with

  :REQUEST in ('Button1', 'Button2')
  

  in the Expression 1. Note that this condition is case sensitive.

• to start xp how to clear the programs that run startup

  has run the cleaning directory program who reported that 39 (YES 39) programs running at startup - how to clear these rogue programs to run until needed?

  You can program the starting by, go in run, type: MSCONFIG in msconfig, change startup programs.

  Or, select run, type: services.msc services.msc in msc, scroll through programs, look for one to edit, R.click on

  it, change, change start 'manual' or 'disable', once at the exit.

• How to stop a program that runs as administrator

  When you start a program that I use regularly, I clicked "run as administrator", how can I fix this so the program no longer works as an administrator?

  I tried to go in the properties and uncheck "run as Administrator".

  Help, please!

  The "Run as Administrator" option in the menu popup is used only once when you select.  It is not stored and permantently used for future time you use the program.

  Just close the program, then click the icon to open it normally and it is no longer "will run as an administrator" unless tell you him again.

• Processes that run automatically

  Hi all
  
  Thanks in advance for any help.
  
  I'm trying to get a procedure runs automatically when a user connects, but I'm not succeed. The procedure is as below, I tried the select statement and there, but the insert does not occur.
  
  I call the procedure on the page of connection "on submit - after calculations and validations' below
  

  procedure INSERT_SCHEDULE_STATUS AS
    v_due_date          date;
    v_appeal_id         number;
  
    
    v_routine_name CONSTANT VARCHAR2(100) DEFAULT 'INSERT_SCHEDULE_STATUS' ;
   
  
  --  Cursor to retrieve the due date
  
  CURSOR  c_Appeal  IS
                          select appeal_id 
                          from   cab_appeal_actions outer
                          where  due_date < sysdate
                          and    action_type_id = 13
                          and    id = (select max(id) 
                                       from cab_appeal_actions INNER
                                       where inner.appeal_id = outer.appeal_id);
  
  
  BEGIN      
          
  FOR r_Appeal in c_Appeal
           LOOP
  
                  -- Process the fetched rows
  
                  INSERT INTO cab_appeal_actions
                  (  id
                    ,action_type_id
                    ,action_date
                    ,appeal_id
                    ,created_by
                    ,date_created
                    ,updated_by
                    ,date_updated
                    ,remarks
                 
                  )
                  
                  VALUES
                  (  CAB_APPEALS_SEQ.nextval
                    ,10
                    ,sysdate
                    ,r_Appeal.appeal_id
                    ,'SYSTEM'
                    ,sysdate
                    ,'SYSTEM'
                    ,sysdate
                    ,'SYSTEM GENERATED'
                  ) ;
                               
                  END LOOP;
  
                  COMMIT;           
           
    END ;       
    
  END INSERT_SCHEDULE_STATUS ;

  Published by: user10256482 on April 14, 2011 14:09

  Go to the authentication post section or if you have a homepage add as a process of onload in this page.