Reports that run "Generating Report. Please wait... "forever

Similar Questions

• "Cleaning up - please wait" forever!

  My handheld (Palm m505) gets stuck and shows "cleaning up - please wait" forever after as I preform HotSync. (My Palm Desktop Gets information from my pocket computer).
  My OS is Windows XP.

  It had been well until I replaced the battery two days ago.

  Thank you very much.

  I found the true cause. This is my Chinese input software that drives me crazy.

  Thanks in any case!

  Message relates to: Palm m505

• My laptop is stuck at "Please wait" forever.

  After that almost a week of update of windows 8 to 8.1, when I connect my windows pc slain to a "Please wait" in the start menu forever, there is a Cancel option but it does not work, I can't reach the office, or anything like that.  I picked up the phone once but the problem came again!

  I called the team support and solution soved by the following steps:

  1. connect to the affected account
  2. Press the Windows key + L to lock the computer
  3. Switch to a user who has administrator privileges account
  4. Open the Task Manager and switch to the 'Processes' tab (press 'More details' If a process tab does not appear)
  5. find restoreoptin.exe & end task this process
  6. return to the affected account (Start Page, click on your account/image name, click the account that you want to pass to)
  7. Open the menu of charm (windows key + C), select 'Settings', and then change the settings of PC
  8. Select Skydrive
  9. Change the storage file, Camera Roll, and synchronization parameters (not sure which one that does the trick)
  10. logout and log of refund in
  11. you will be asked is no longer with the blank screen 'Please wait '.

• During the reinstallation of XP, message "Please wait" frozen and inactive computer

  Recently, I tried to reinstall Windows XP SP2 from an installation disc that came with my computer. Before reinstallation, it was under XP SP3.

  He went through the installation process. It appeared that the installation is complete. It restarted (for the second time during the installation) and engaged in the usual Windows XP loading screen and now froze on a similar screen that displays the message "Please wait" instead of the loading bar. I waited for several hours, and the screen has not changed. The computer makes no noise and doesn't seem to be something.

  What should I do?

  Hello

  ·        You are able to boot into safe mode without any problem?

  ·        Did you do a fresh install with formatting or without formatting the hard drive?

  Method 1:

  I suggest you to disconnect all external peripheral devices that are connected on the system such as (printers, scanners, etc.) and check if you are able to boot to the desktop.

  Method 2:

  Step 1:

  I suggest to start in safe mode and check. Follow the steps mentioned below.

  a. restart the computer and keep tapping F8 until you reach the start menu.

  b. Select the startup options safe mode and press to enter.

  If you are able to boot into safe mode without any problems then, it might be a problem with the graphics card drivers that are installed on the system. I suggest to disable the video card drivers from the start in safe mode and then try to boot to the desktop and check.

  Step 2:

  To turn off the graphics card driver, follow the steps mentioned below.

  a. click on Start menu and click Control Panel.

  b. click System and click the Hardware tab.

  c. click the Device Manager button and right-click on the graphics card driver that is present.

  d. click on uninstall and then try to boot to the desktop and check.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with Apex 5.0 report with a query that runs in SQL Developer

  Hello

  I have a query that runs in SQL Developer without problem, but when I use it in a classic report, it displays following:

  error report:

  ORA-06502: PL/SQL: digital or value error: character of number conversion error

  
  

  The query is:

  select 
   T1.ID_ATTACHMENT, 
   T1.BLOB_CONTENT, 
   T2.ATTACH_CATEGORY, 
   T1.FILENAME, 
   T1.ATTACHMENT_DESCRIPTION 
  from ATTACHMENTS T1
   LEFT JOIN REF_ATTACH_CATEGORIES T2
    ON T1.ATTACHMENT_CATEGORY = T2.ID_ATTACH_CATEGORY
   WHERE T1.ID_ATTACHMENT IN
    (SELECT ID_ATTACHMENT FROM REL_ATTACHMENTS
     WHERE REL_PART_ID = 1
     AND REL_ID = 64146);
  

  
  

  And the output of SQL Developer is:

  

  I have following Setup for the BLOB_CONTENT column in the classic report:

  

  Any ideas what is causing this problem?

  Thanks in advance,

  Sergio

  
  

  I don't have notes with me, but I think that the content of the blob must be selected as:

  DBMS_LOB. GetLength (blob_content) as blob_content

  and check that you have included the primary key in the results.

• Suddenly - whenever I right click on 'New' in 'my documents' or on the desktop or in a folder, in order to create a folder or file, windows says "Please wait while that corel suite 11 is installed.

  Suddenly - whenever I right click on 'New' in 'my documents' or on the desktop or in a folder, in order to create a folder or file, windows says "Please wait while that corel suite 11 is installed. I click on cancel, but it keeps coming back. I have not Corel. If I click on cancel about 13 times it finally stops! But I can't use right click on 'new' installation at all, it seems. Also I have problems with Outlook - I wonder if I need to re - install Windows XP or is there a simpler solution?

  Thanks for yr help.

  Yes, Outlook often think files 'have not been closed properly' and takes forever to 'check' the. I give him extra time to close before stopping computer...

  Aeoliansands,

  Welcome to the Microsoft Answers community.

  You can download and run the Installer Cleanup utility:

  http://download.Microsoft.com/download/E/9/D/E9D80355-7AB4-45B8-80E8-983A48D5E1BD/msicuu2.exe

  - or try reinstalling Corel.

  Your second question is related to Microsoft Outlook and would be better suited in the Groups of Discussion Outlook. Please visit this link to find a community that will provide the support you want.

  I hope this helps!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I want to display the number of success / testing failed in the Testtand of xml report, please help me

  Hi, I want to display the number of success / testing failed in the Testtand of xml report, please help me.

  Later, my requirement is that I should be able to view the number of test / has not passed in the header of the report too.

  I have attached a sequence to give you an idea of how to get the number of results (I don't check it works ), I used 'SequenceFilePostResultListEntry' callback to calculate the number of results.

  and the number of results is passed to the 'ModifyReportHeader' through Globals files, where you can edit the XML file to display in the Repot (follow the link in my previous post).

  Hope this helps

  AshwiN,

• Please wait while Windows configures FAX"... this process stops and I get another message that says:"the component you are trying to use is on a CD-ROM or another removable disk that is not available. "

  Original title: widows installation problem

  I have Windows XP Professional running on a desktop older.  I cleaned the disk and I would use it only as a 'internet '.  It works well and response times are pretty fast, but when I connect I get a box that says "Please wait while Windows configures FAX"... this process stops and I get another message that says "the component you are trying to use is on a CD-ROM or another removable disk that is not available", "put the 'FAX' disk and click OK. , "" Use Source: '1' "»

  The first question is I do not use a fax application and never did, I have tried every disk I can think of to complete the process, but I get the same message with each one 'the path '1' is not found. "Make sure you have access to this place and try gain or find the installation 'FAX, MSI' package in a folder from which you can install the FAX product." .. then "error 1706 - FAX." Valid any source not found for the FAX product.  Windows Installer cannot continue. »

  This will take place two or three times at the beginning upward.  How can I prevent Windows Setup tries to install something that I do not use or do not seem to have?  I deleted any fax program, that I could find on the computer, and nothing seems to work.

  Hello

  1. have you done any change in software on the computer lately?
  2. are you able to install other applications and programs successfully?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state. There is an application which is set to start when you start the computer and which launches the installer of Windows.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Message "Please wait until the current program is finished uninstalling" or that when the uninstall a program

  Original title: Uninstalling questions

  The problem is when I try to uninstall any program I get a pop up message saying "Please wait until the current program is finished uninstalling" or that did not uninstall or change a program for months! Any ideas would be appreciated

  Hi Martin,

  This error message is related to the windows service installed on the computer.

  Before you begin to solve the problem, I recommend to restart the computer and verify if you are able to run the program.

  If the problem persists, I suggest you follow the provided methods to solve the problem.

  Method 1

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  (a) click on Start Menu

  (b) type msiexec /unreg , and then press ENTER.

  (c) click on Start Menu

  (d) type msiexec/regserver , and then press ENTER.

  Method 2

  If the previous step fails, check if it has all the facilities waiting on the computer using the registry.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the link below.

  Back up the registry

  For Vista: Back up the registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Empty registry key "in progress"
   
  Check the following registry key:

  HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress

  Empty/rename "PendingFileRenameOperations" registry key

  Check the following registry key:

  HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations

  Hope this helps; Please get back to us with the results.

• "Please wait so that the State of cofigures of windows"

  At startup, an Info screen says "Please wait so that the State of cofigures windows" must be closed 10 + time to disappear.

  Hi Gebby,

  1. are you able to boot to the desktop?
  2. did you make any changes to the computer before the show took place?

  Method 1
  Step 1: I suggest to start the computer in safe mode and check if that helps.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If you are able to boot to the desktop, and then perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 3

  Run a full scan with your antivirus software with some type of malicious software removal.

  http://www.Microsoft.com/security/default.aspx

  Method 4

  If you are not able to boot to the desktop, and then do the Startup Repair.

  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

• 'Please wait until that the current program is finished uninstalling or change'

  Im trying to uninstall a program and when I click on uninstall it says: "Please wait unti the current program is finshed uninsatlling or that" it says always that what I'm doing.

  Hello

  This question has been answered here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/error-when-uninstall-a-program-Please-wait-until/9a32c111-F3B7-4079-BB4A-f781fa8f12ee

  I think you should try:

  #1 restart your system and try again.

  #2 check that the software is not running in the background.

  #3 try a 3rd party uninstaller but be careful because you don't have much control over how a 3rd party uninstaller effectively uninstalls - sometimes they leave "debris" that can affect future use.

  Kind regards

  Joel

• Windows pop up on my screen that says "Please Wait".

  Original title: pop-up windows

  I continually have the 2 inch Windows pop up on my screen that says "Please Wait".  All color sheets and everything stops until it emerges.  What is this and how do I get rid of him?

  Hello

  ·         Do you use the computer laptop or desktop?

  ·         When exactly do you get this message pop up?

  ·         Were there recent changes made on the computer before the show?

  Follow these methods and check if that helps:

  Method 1:

  I suggest you to update the latest drivers for the graphics card on the computer and check if it helps:

  How to manage devices in Windows XP

  Method 2:

  This article is intended to help you use the resolution of the issues of video display that is included in Windows XP Help and Support Center. This article also provides a list of online support services that may help you solve your problem.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  Connect your computer monitor to a spare computer and see if the error 'Please Wait' always appears. If so, it's a problem with the monitor.

• Receive message "Please wait while windows configures the status" and then "the component that you are trying to use is on a CD Rom, please insert". I don't have the CD. How can I stop this?

  Windows Setup status

  Whenever I start my computer, I get a series of pop-up boxes that talk about "Please wait while windows configures the State" and then the one that says "the component that you are trying to use is on a CD Rom, please insert".  I have no idea what it is, and I have no disc to put on this line?  If I hit the buttons cancel these boxes enough times to go, but it's annoying and there is notihing badly with the operation of the computer, after I get rid of the boxes.  No idea how to stop this from happening again?  I did all the steps that have been mentioned earlier and no results.  I even did a system recovery.  I don't know what to delete.  Please help thanks

  Hello

  These messages usually mean that you have a problem with the HP printing software

  Contact HP

  http://welcome.HP.com/country/us/en/contact_us.html

  Contact HP options at the link above.

  http://h30434.www3.HP.com/

  HP's Support Forums at the link above.

• When I try to "uninstall or change" a program of this message permanently appears 'Please wait until that the current program is finished uninstalling or change'

  I can't uninstall anything. It is permanently blocked with the message "Please wait until that the current program is finished uninstalling or changing" appearing if I try to uninstall any program.

  Hello

  Try the methods provided below and check if the problem persists.
  

  Method 1

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  (a) click on Start Menu

  (b) type msiexec /unreg , and then press ENTER.

  (c) click on Start Menu

  (d) type msiexec/regserver , and then press ENTER.

  Method 2

  If the previous step fails, check if it has all the facilities waiting on the computer using the registry.

  Important  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the link below.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Empty registry key "InProgress".
   
  Check the following registry key:

  HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress

  Empty/rename "PendingFileRenameOperations" registry key
   
  Check the following registry key:

  HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations

• Need help to understand why my downloaded PDF doc displays "Please wait...". If this message is not finally replaced with the appropriate content... "after that I have already downloaded the version update for windows 10

  Need help to understand why my downloaded PDF doc displays "Please wait...". If this message is not finally replaced with the appropriate content... "after that I have already downloaded the version update for windows 10

  This is because the PDF file is not be open in Acrobat or Reader, but by the browser which is unable to handle the specific PDF content.

  If you use Firefox or Chrome, follow these steps: https://helpx.adobe.com/livecycle/kb/xfa-forms-firefox-chrome.html