Prodesk 600 G1 TWR: problem of power supply internal

Similar Questions

• ProDesk 600 G1 TWR: restore ProDesk for Win 7 Pro

  This is the situation:
  I have a HP ProDesk 600 G1 TWR with upgrade to Win 10 Pro. Some limitations of the software, we need to upgrade to Windows 7 Pro. There is the HP Recovery partition but F11 does not work, I think because for some reason, the HARD drive turned to the dynamics. Now, like a miracle, I found the DVD of the PC kit, well well, I'm not sure complete if belong to this concretely workstation, but HP for the same model.

  

  The question: what about the license? In my view, it is an OEM license and I don't have the key. Can I use the DVD Win 7 Pro for the recovery of the PC? What the activation process in this case?
  
  Of course, if it is possible just to use the recovery partition, will be great.
  Thanks in advance!

  Hello:

  You should be able to use the recovery discs to install W7 without key.

  This member of the forum has just done the same with a similar business office.

  His situation was that it has installed an SSD.

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/install-new-SSD-with-a-fresh-install-of-Windows-7-Pro-that/TD-p/5611011

• HP Pavilion G4 1310AU: problem with power supply for laptop HP Pavilion G4 1310AU

  Hi This is my first thread in the toms hardware, I have problem with my laptop power supply. my laptop cannot turn on if I remove the battery and use the charger only, but if I use my cell phone battery can turn on without problem for my laptop to use the battery to turn on and after my laptop that works and I remove the battery my still laptop running with the charger plugged, and that I charge my phone when my battery<80% capacity="" e.g="" on="" 40%="" battery="" power="" my="" laptop="" underclocked="" processor="" speed="" to="" 800="" mhz="" from="" 2.5="" ghz,="" i="" have="" changed="" power="" management="" in="" windows="" setting="" and="" amd="" catalyst="" to="" running="" full="" speed="" when="" plugged="" in="" and="" charging="" but="" my="" laptop="" still="" underclocked.="" i="" have="" updated="" my="" bios="" with="" latest="" version="" but="" still="" underclocked.="" after="" 100%="" fully="" charged="" my="" laptop="" processor="" running="" in="" full="" speed="" at="" 2,5="" ghz...="" other="" that="" no="" issue="" in="" my="" laptop,="" everything="" running="">

  I'm never use my laptop for 3D games, most of use for the office, watch video, listen to music and navigation

  My computer laptop specifications
  AMD A4 3305M 1.9 Ghz Turbo up to 2.5 Ghz (TDP 35watts) (Dual Core)
  2 GB OF DDR3 RAM
  HARD DRIVE 500 GB
  DVD RW
  Bluetooth
  14 "monitor

  What is my charger underpower for power to my laptop? my charger is genuine HP with 65 Watt (18, 5V and 3, 5)
  should I buy charger 90 watt (19V and 4.74)?
  or my default charger? so, my charger not Power not in 65 Watt as a specification written in but less than 65 watts running?

  Thank you

  Sorry for my bad English

  Hi @Dana88 ,

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  I understand that if you remove your battery, you can't boot up your laptop.  This is not unusual. some laptops are set up in this way.

  I understand that when you have the phone connected and charge the batteries of your performance is lowered.  There is more than one draw powere when it loads to the battery.

  Here is a link to the laptops HP - test and calibrate the battery (Windows 7) to ensure that there is no problem with the battery.

  Could also remove the battery once you put under tension.

  You asked questions on the use of a 90-Watt adapter.  Here is a link to HP G4 Notebook PC Maintenance and Service of Guide.  Chapter 3 page 32 lists not one that is recommended.

  Good luck!

• Seriuos problem with power supply

  Hello, im new and I have a seriuos problem with my computer toshiba laptop satellite there is a problem with the end power cable the cable that goes to the laptop the caches on a metal stick and once the stick came out with the cable and I lost, is there a way to fix it or get the stick somewhere? I can't charge my laptop without it and sorry for my English: (of cause.

  These problems must be handled by authorized personnel only, so I recommend you to contact the nearest Toshiba authorized service provider and ask for help.

  The laptop must be disassembled and DC in port soldered to the motherboard or may be exchanged with a new one.
  You think you can fix it yourself?

• T61 and problem with power supply

  
  
  

• The upgrade of the power supply for Alienware R4

  I just bought a MSI r9 390 x upgrade my r9 270 came with the computer. I had a problem where as soon as I turn my graphics to the max the computer restarts. No blue no screen no error message just to the top restart as if someone plugged and unplugged the pc.

  I have this reduced to a problem of power supply as no overheating takes place. I think it is the J556T power supply provided with the original pc stock. I don't think that's the tension to keep the card will I think 18V POWER supply which im sure this card requires more volts 18 years to operate at high efficiency. If you think the same thing that I am I would like to improve my diet, the problem now is the case around the PSU doesn't let me with many options because it only having openings on the sides and PSU most now have fans in the top and bottom. What PSU suggest you.

  «How about we get your diet 1 work before to decide, it is not decent...» »...

  • Update Aurora R4 PSU
  • The ALX files: A triad of food Swaps
  • Aurora psu > research forum <> Aurora Power Supply
  • "You have to rewire the whole machine" after deleting old psu

  Tip: two cables grfx were J556T, each cable is rated @ 18amps, which makes the two tracks of 12V 18amp; you have to feed the card with every cable / each tubular structure for better performance. While each cable carries a 6pin & a jumper 6 + 2, don't let it fool you > he stlll reduced to be just a cable. Try the two cables: use one & only one connector type out of each cable...

  Tip: when the need for a "8pin", insert the primary 6pin & borrow the 2pin off the 2ndary rider

  -Aurora: How to run a card 375 watt... kind of... -

  

  -most Aurora owners who have the PSU 875 watt also have a cable that is not used in the floor case: use the...

  Here is a 375-watt + HD6990: note the grfx-RED & blu - ylw cables are deployed both 6990 has two rails 12v 18amp--> 18 x 2 = 36 x 12v = 432watts has a. Good looking<>

  To use only one cable (prim and jmpr) is to refuse access map to additional 216watts provided by cable #2. unlovely

  For these cards that need one (or two) 8pins, we do that again? --> Insert the primary 6pin, borrow the 2pin off the 2ndary rider & ask the rider on the side, unused <> kapisch?

  -the primary 6pins is the path of least resistance-

  By the way by the primary 6pins - & with the horsemen of 2ndary - the person above uses a less effective connection diagram; resistance built in the appendices of the rider:

  • because of her crimp mechanics inside the primary 6 p
  • due to the addition of 4inches of wire, it's the rider
  • because of her crimp mechanics inside the cavalier 6pin

  

  -do not 'put' the primary 6pin on the side (left), "throw" the rider to the side & borrow its 2 pin (right).

  Aurora in a solo card application, always use the primary 6pins (=

• My new S2440L face the problem of power outage

  I have just purchase S2440L to replace my old S2340L. With S2340L, I have never have any problem of power outage but when I plug my new S2440L, it was goes black for a few seconds. The problem was random 10 minutes to 40 minutes. These two monitor was same HDMI cable (and work fine on my SmartTV too), PC same and even graphic card driver. I try to reinstall a fresh driver but still a problem. Is - it could be hardware related? Perhaps S2440L have a hardware problem or a S2440L need a more specific HDMI cable? Now I have any problem with my S2440L. the blackout has been occur when overheating circuit behind the monitor. I was watching about about on the HDMI port of overheating by googling and found that HDMI can fail if the (amplifier HDMI) circuit was overheated (I'm not have overheating issue on my old S2340L (rev.) A00). i sure as S2440L (mine is rev. A01) have material problem on HDMI and circuit surprise (lower part of the monitor) have very high temperatures. I hope you, Dell will be it is your responsibility that your monitor, S2440L have an overheating problem / high temperature and could be a HDMI port blackout curtains. It's bad for me avoid this problem by using the VGA port.

  Thank you, ChozeriZes.

  Christ

  I just touch the border smaller surface compared to the top edge, it is very hot.

  maybe only my S2440L have this problem...

  Today, I remove my VGA card and the power cord, and reinstall the whole again, the problem in black often seem to not like it before summer. It's just a couple of times for that day.

  Actually I feel fine with this monitor, both design and image, but still nervous about high temperature, it's may be the major problem in the long term.

  Maybe I was too early to conclude everything... HDMI is a very sensitive matter, as I said in a previous comment, then I have some tests for my S2440L

  -overclock grid power my VGA card around 2% and delete some fan of my system.

  -find the new place for the power adapter avoid the heat. (I found this use of monitor LG IPS 1. 3a adapter 19V is perhaps)

  Note: I use 750W Seasonic and power supply of 5V and 12V is pretty good (5.1V and 12.05V).

  OK, now I need to close this thread as solved and and report this problem like power supply problem; in major relate.

  "on monitor blackout curtains when use the HDMI port occurs when power on unstable system will also be able to rack in the House, heat and cable must use HDMI1.4 full spec for sure (if HDMI cable does not include with the package).

  Best regards

  ChozeriZes

• Fan power SUPPLY XPS 8700 block

  I have an 8700 XPS which is now two weeks old.  The Tower began to make some strange electric tone and/or the sounds of gnashing especially at the start.  I removed the side cover and the noise is coming from the PSU.  Sometimes the power supply fan is running at very low REGIME and squeaks.  Other times at the start of the power supply fan turns at all and there is a strange electronic tone coming from the PSU.  If I move the blades of the fan with a plastic straw, the fan will run upward and tone noise subsides.  Faulty PSU?  The unit is under warranty, but having a Dell technician will come out can be a problem with my work schedule.  Reference Dell will send me a new power supply?  I don't mind reverse out and return the defective power supply.  Thanks for your help.

  As I suspected, the BIOS update does not solve the problem of power supply fan. But if the flash update had bricked motherboard, Dell should replace it as well as the power supply under the warranty.

  Dell computers may vary only the CPU fan speed based on heat, not their fan PSU OEM.

  Hope that the new power supply solved the problem and you can continue to enjoy your new toy.

  Post back and let us know what happens after replacing the power supply...

• HP ENVY PHOENIX CTO 810-135QE - 600 watts power supply Question

  In the near future, I would like to upgrade the video card in my desktop HP ENVY PHOENIX CTO 135QE-810 GT 640 default to something a little more powerful and I was wondering if there is any details about the default 600 watts power that will help me in my decision to the next video card.

  I know that some video cards require a number of amps on the 12 volt rail and all the information that I have found previously on the power of 600 watts power supply in the computer is not in that kind of detail.

  What I read, the power is a Petrus 600W e-star 5.0 Bronze, HP Part number 633186-002.

  Any additional details and details on this power to help me determine the next video card would be useful.

  On a side note the video card, I'm currently doing is one of the next Nvidia GTX 750 TI models, thoughts and recommendations on this specific map?

  Thank you

  JCOOPER2

  Hello

  Your PC has UEFI bios, so most video cards should work.  Some video cards will work in UEFI mode and others in legacy mode, that your PC is able to run.

  When the manufacturer of the video card and/or AMD or NVIDIA specify a minimum power supply size then it is best to stick to this recommendation.  Not all power supplies are built to the same standards of quality.  In addition the internal components, temperature, charges unknown and time that the PC will be placed under the maximum load are taken into account at the recommendation of minimum power supply is indicated.

  I have not seen a power of 500 watts with 12v rating of 18A, but this does not mean that there is not. And if that's the case, then the total power rating is suspect. A video card that requires an external auxiliary power connector will also draw power from the PCI-E slot.

  Are there cases where the minimum size of the power supply is insufficient? Yes, those who might be extreme but someone can have connected to power different connectors either to avoid buying a new power supply or maybe around just the food manufacturer minimum power rating. Some may do it thinking 'I'm going on fox the Fox ". It can work, but maybe the questions later start occurred.  I prefer to get the job done right the first time. You don't need a power supply to perhaps of overload and short circuit then internally causing spikes to the components in the PC.

• With Tecra750DVD power supply problem

  My laptop recently decided to refuse to turn on when I turned on. There is a yellow light in the position of "power" over the front of the machine, but it won't start. I tried all the options: Power Supply Unit only, only battery, Power Supply Unit + battery and nothing works. Fuse is good in the plug of power supply. Battery is less than 12 months.

  Hello

  You can remove the battery completely when problemshooting this kind of predicament.

  First of all - what impression the power button? Does it feel as it should? Refers to how it used to feel? If this is not the case, check if there is an active "lock" behind it.

  Some models have a safety lock to keep the machine from accidentally start in a bag or two.
  Please look at the LED that indicates that your adapter is connected. When you try to switch the machine on, what is happening with this LED? Always the same fixed green light or suddenly out or flashing?
  If out, please try to get your hands on another adapter (borrow prefferably). If it flashes then try to remove the AC adapter, remove any option that can be easily removed, CD/DVD, memory, expansion card PC and so on.
  Try to restart it (remember to join HQ again). Even? If Yes, then sorry to say I think that your machine needs service. If this isn't the case, then there could be hope.

  Disconnect the AC and put back in place the units that you have deleted before, one by one and after each unit, try to restart the machine.
  If it starts fine, remove the unit and reconnect the next unit. Perhaps you will find that there is a problem with an external device (memory, CD, PC Card and so on), then at least you can continue working more or less as before the problem.

  Good luck

  Tom

• On Satellite P100 power supply problem

  Hai
  I bought the new laptop Satellite P100. Suddenly it does not start (no power to notebook) and the same time, I have only checked by the only power a/c no result, also do not charge the battery. I put t know what is the reason. Can someone give suggestion?
  Thank you bye.

  If the power light is blinking there is probably a problem with the electronic power supply. In this case, the laptop sends flashes code. Read this code, technicians can identify the problem.
  Please, don't waste your time but the closest service provider contact allowed in your country.
  After 18 months of that guarantee must be valid (it depends of course on where you live) as well as the repair must be free.

• HPZ620Workstation and Evga Titan SCBlack POWER SUPPLY PROBLEM Edition

  Hello world

  I bought (Evga Titan SC Black Edition), but I have a problem with my power supply hpz620

  http://www.plugloadsolutions.com/psu_reports/HP_S10-800P1A_ECOS%202609_800W_Report.PDF

  I have two xeon processors (2 * 135W) and my question is the graphics card has enough power to do with the rest?

  Second problem is the molex cable I have only one. What is the best solution for me?

  Edition of black titan sc EVGA specification

  Performance

  NVIDIA GTX TITAN BLACK

  Hearts CUDA 2880

  967 MHz Base clock

  Boost 1072 MHz clock

  Memory

  6144 MB, 384-bit GDDR5

  7000 MHz (in force)

  336 Gbps of bandwidth

  Hello:

  You can also ask your question on the HP Business Support Forum - z section of workstations.

  http://h30499.www3.HP.com/T5/workstations-z-series-XW-series/BD-p/BSC-272#.U4CnZ-lOW9I

• HP Pro 6000 Elite 8000: Does Hp 6000 Pro and Elite 8000 Supports 600 Watt Power Supply connector having 6 pin

  I want to upgrade my suuply standard power of 300 watts to 600 watts in my two HP 6000 minitour pro and Elite 8000 Tower systems. Is the Board supports power supplies good as brand take heat?

  I would not classify a Thermaltake PSU as a very good brand.

  Unfortunately, your desktop PC uses an exclusive style of PSU, so standard ATX PSU will not work.

  Upgrading the owners 300 Watt PSU 600W ATX POWER supply is not just going to work.

  Your desktop PC is one that is not very conducive to the upgrade.

• HP Envy Pheonix 810-210: Possible POWER supply problem?

  I bought the HP Envy 810-210 a Phoenix earlier this year and recently replaced a 645 GTX graphic card a GTX 960. When I replaced it I noticed the power cord was appropriate is more good in the power supply and can fluctuate a little. Now when I move my PC, the power cord will be disconnected and will Crackle. This turns off my computer and I have to tinker with a correct position in the socket to restart.

  What would be the recommended action for this? Is this a problem of cord or plug, do you? Y at - it a power supply that matches or is better than that which is currently in my computer (here), which will be a fit if it needs to be replaced?

  Hello

  The CX600 Corsair or CS650m would be an excellent choice for a power supply.

• Strange on my Satellite A100 power supply problem

  Hi I hope it's just me in Sun.

  I plugged my power on my laptop today and found that no power is getting to the laptop. I checked all the obvious things like the fuse and have even tested the output of the power supply with a multimeter and I get what looks like the correct voltage.

  However, when the power supply is plugged into my laptop blue "alternating current" does not and windows wants to say I'm running out of battery.

  Someone else had this problem? It is a work of repair and return? (I hope really not).

  Thank you

  Doug

  > Is this a work of repair and return
  I'm afraid, m Yes :(

  But the question is; malfunction of what part?  :|
  Maybe that your inquiry is good and everything is ok with the AC adapter / CC.
  This means that there could be something wrong with the laptop itself.

  Maybe it's only one loses the connection between the plug and the motherboard or most serious problem as a malfunction electronics power?  :|

  Who knows. It of very difficult to say what's wrong without any diagnostic tests
  I recommend you contact a technician in your country. He could check the laptop and found much faster fault as a user simply ordinary like you and me.

  Good luck