T61 and problem with power supply

Similar Questions

• HP Pavilion G4 1310AU: problem with power supply for laptop HP Pavilion G4 1310AU

  Hi This is my first thread in the toms hardware, I have problem with my laptop power supply. my laptop cannot turn on if I remove the battery and use the charger only, but if I use my cell phone battery can turn on without problem for my laptop to use the battery to turn on and after my laptop that works and I remove the battery my still laptop running with the charger plugged, and that I charge my phone when my battery<80% capacity="" e.g="" on="" 40%="" battery="" power="" my="" laptop="" underclocked="" processor="" speed="" to="" 800="" mhz="" from="" 2.5="" ghz,="" i="" have="" changed="" power="" management="" in="" windows="" setting="" and="" amd="" catalyst="" to="" running="" full="" speed="" when="" plugged="" in="" and="" charging="" but="" my="" laptop="" still="" underclocked.="" i="" have="" updated="" my="" bios="" with="" latest="" version="" but="" still="" underclocked.="" after="" 100%="" fully="" charged="" my="" laptop="" processor="" running="" in="" full="" speed="" at="" 2,5="" ghz...="" other="" that="" no="" issue="" in="" my="" laptop,="" everything="" running="">

  I'm never use my laptop for 3D games, most of use for the office, watch video, listen to music and navigation

  My computer laptop specifications
  AMD A4 3305M 1.9 Ghz Turbo up to 2.5 Ghz (TDP 35watts) (Dual Core)
  2 GB OF DDR3 RAM
  HARD DRIVE 500 GB
  DVD RW
  Bluetooth
  14 "monitor

  What is my charger underpower for power to my laptop? my charger is genuine HP with 65 Watt (18, 5V and 3, 5)
  should I buy charger 90 watt (19V and 4.74)?
  or my default charger? so, my charger not Power not in 65 Watt as a specification written in but less than 65 watts running?

  Thank you

  Sorry for my bad English

  Hi @Dana88 ,

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  I understand that if you remove your battery, you can't boot up your laptop.  This is not unusual. some laptops are set up in this way.

  I understand that when you have the phone connected and charge the batteries of your performance is lowered.  There is more than one draw powere when it loads to the battery.

  Here is a link to the laptops HP - test and calibrate the battery (Windows 7) to ensure that there is no problem with the battery.

  Could also remove the battery once you put under tension.

  You asked questions on the use of a 90-Watt adapter.  Here is a link to HP G4 Notebook PC Maintenance and Service of Guide.  Chapter 3 page 32 lists not one that is recommended.

  Good luck!

• Seriuos problem with power supply

  Hello, im new and I have a seriuos problem with my computer toshiba laptop satellite there is a problem with the end power cable the cable that goes to the laptop the caches on a metal stick and once the stick came out with the cable and I lost, is there a way to fix it or get the stick somewhere? I can't charge my laptop without it and sorry for my English: (of cause.

  These problems must be handled by authorized personnel only, so I recommend you to contact the nearest Toshiba authorized service provider and ask for help.

  The laptop must be disassembled and DC in port soldered to the motherboard or may be exchanged with a new one.
  You think you can fix it yourself?

• Market with power supply is not possible on the Satellite M60-167

  Hello

  I'm sorry for my English saw. I have a problem with my Satellite M60-167. When I have connected the laptop with power supply and press the 'Power', then does'nt start Notepad.
  When I use only the battery and push a lot of times the "Power Button", that the laptop will be started.
  Question: It is a problem of material or not. This laptop that I bought it in January 2006.

  Can you help me?
  Thank you very much for your theory.

  AX.

  Hi Axel

  My theory is that there may be some problem with button / stop himself (white metal under the button), or perhaps with several Planar cable wire.

  Also, for me it is definitely hardware problem. If you want, you can contact the partner of service allowed in your country and see what they have to say about it.

• replace 300 watt POWER of ML330 G3 unit with power supply 600wattage is this possible?

  Hi guys,.

  If I could replace 300 watt POWER of ML330 G3 unit with power supply 600wattage is this possible? Is this possible? Please notify

  Hi Big_Dave

  Thank you for your continued support...

  Now, I replaced the in situ 300 watt power supply provided with the HP ML330 G3 with 750 watt Corsair and well. No smoke or fire smelly so that chips and salmon "I am preparing for dinner.

  Regarding your question, Yes, the size of floppy Bay is the same size as that of rpm scsi 10 k 80pin. drive it is a 80-68 pin code converter that plugs nicely into the internal water of 68 pin male. Corsair 750w PSU comes with connectors 8 x 12v morlex, these can be connected to the connectors extra 12v adapter needed to put these converters to 68pin 80 - scsi

  Daisy chaining scsi disk is easy, the two external channels can be used to connect to the scsi drive more in an another case unithaving / chasy a total of 28 scsi disk Garland.

  Everything is settled now, my only question now is to do with knowing how to configure RAID correctly and this constant warning about Battery Backed Write cache messages' on the smart card array 6400 however I'ld who post on another section of this forum. This can now be closed according to the original question with replacement of the power supply to a power greater.

• Must I also patch grid infrastructure home with power supply?

  Hello

  I am building a new server to replace an old one with the following configuration:

  OLD Config: Oracle 11 g 2 EE (11.2.0.3) with POWER 16056266 block, on OEL 6.2 64-bit (file system)

  NEW Config: Oracle 11 g 2 EE (11.2.0.3) with power supply on OEL 6.2 64-bit, ASM (grid below) 16056266, 11.2.0.3

  If I understand correctly, grid Infra Software version cannot be less than that of RDBMS software. Because the RDBMS software must be patched with 16056266 power supply to match the existing server, I have a few questions:

  1. Should I ask a PSU 16056266 grid infrastructure home (I'm sure the answer is 'yes', but I want to ensure that)
  2. Is the same power supply for the RDBMS and grid infrastructure OR there is a download separate patch for grid below?
  3. I need to replace the existing 'OPatch"under grid infrastructure home with the latest [just like I do to patch House RDBMS]?

  Thanks in advance!

  Hello

  You must apply the following PSU on the grid below:

  BUG 16083653 - 11.2.0.3.6 (April 2013) Grid Infrastructure Patch Update (GI PSU) contains

  BUG 16315641- PATCH UPDATE SET 11.2.0.3.6(GI COMPOSANTS de l'INFRASTRUCTURE GRID)

  BUG 16056266 - 11.2.0.3.6 (April 2013) set of patches of database update (PSU)

  as mentioned in: -.

  Readme - Patch Installation and uninstallation of 11.2.0.3.x GI PSU [ID 1494646.1]

  Kind regards

  Dalia Sarey

• Prodesk 600 G1 TWR: problem of power supply internal

  Hi, I have a ProDesk 600 G1 tour version. I already bought a GEForce GTX 750ti graphics card a lay-off day, but when I install this card it says I must first of all insert the PCI-e power connector (connector 6 pin) and it no longer starts. My problem is that the standard 240W (?) Block of power SUPPLY of the PC is not enough as: 1) it is under powered and 2) power supply does not have a detached 6 pin PCI-e connector to plug into the map. I tried some of the PSU, but nothing I've tried works as my standard motherboard does not have a connector 24 pins, which is have the PSU.

  Long story short, please tell us what modular power supply I can use (thinking of the Corsair CX600M) and will work with my PC. Not too worried about size - more concerned about a power supply with all the correct connectors. Thank you much in advance.

  In polite terms (IMHO) @Big_Dave tried to explain that it is IMPOSSIBLE.

  Because the motherboard only has 2 power headers (a 6 pin and 4 pin) that is not a standard ATX format.  You cannot use an ATX power supply, it will not work.  Here is a list of parts, graphics cards that would work with 320W PSU, your computer has.  The upgrade and Service Manual is here.  Please note pgs 11 + on the internal components.

• Unusually slow MacBook pro, as well as problems with power.

  I'm looking for help on setting my Mac, any help from anyone would be great!

  Recently, my MacBook Pro (running El Capitan) at the end of 2013 model started running really slow unawares (before that it was perfect). No hardware or software, changes began to really randomly goes slowly. My mac has always very well maintained, regular clean ups of junk, utility to check disk done often, no useless apps or data.

  Other questions, I'll have with power up the mac off is when I press the power button to turn off it starts then a few turns (don't not even to Apple to loading off-screen, shines the screen but then powers), I have to hold the power button for 10 seconds approximately to get power properly, when I close the lid without turning off then open it I went to the login screen instantly but then close the book Mac downs completely.

  I ran the Apple Diagnostics, no problem. I also ran repair disk utility, no change. I even did a clean install of the operating system and there was a very minor change, but always far make the level it's at.

  Thank you

  A slow Mac may be due to not enough available storage space.

  Click on your Apple  menu at the top left of your screen.

  In the menu drop down click on about this Mac , and then select the storage tab.

  Your Mac is the bare minimum needs 8 GB of storage available just for the operating system not to mention all your personal data.

• How to use the Camileo H30 with Power Supply

  Hello

  First: Excuse my English, im from Germany ;)

  I have a Camilio: 30. its has been purchased used. I've only had the camera & the original battery.
  No supplements (such as usb or power supply cable original)

  what I want: I need to shoot for a few hours. The battery is unable to do. so I want to use it with a block of power, but when I put in (throughh a mini-usb connector) of the camcorder goes into charing (no actions are possible), but I want to make full use of the feature when the power is connected.
  How should I treat it?

  I got an a 2, 25 a 5V power supply, I think its enough... or not?
  The label on the side of the camcorder bottum said 5V 2A...

  Thanks 4 help me :D

  Greetz

  Hello

  If the Camileo H30 and I got this camcorder with battery and adapter supporting USB mini jack.
  The s AC adapter camcorder supports the release of 2A and 5V
  Its model DSA-10 p-05

  Google for this model, maybe you could get one from some dealers online
  Otherwise recommend that you check the other adapters supporting these values.

  For example this one:
  http://www.toshibadirect.com/TD/B2C/Adet.to?poid=484958

• Portable computer L500 satellite starts only with power supply

  Hi Please help me
  I brought my laptop say there are 3 or more weeks... I'm working on the battery and power, but just now I can only run in power.

  Its like the battery does not exsist. It indicates that the battery is charged to 100% but the computer does not light with the power of the battery...

  Any suggestions would be highly popular...

  -d-

  When the operating system is loaded is recognized correctly battery?

  In any case, this behavior is not normal and maybe you should contact the nearest Toshiba service provider and ask for help. They can check the battery and the power supply electronic and see what's wrong here. The warranty is valid if new battery or repair will be free.

• Pavilion a6530f: what video card installed works for Windows 10 and a 300W power supply?

  I have a6530f a desktop Pavilion PC.  I am currently running Windows 7 and am interested in upgrading to Windows 10.  I get and error message when you try to install the W10.  "NVIDIA GeForce 6150SE nForce 430".  I think I need to improve my video card.  Can what video card I install that will work for Windows 10 and is rated for the power supply 300W in my lap?  I'm not very techie.

  Many of these inexpensive graphics cards for Newegg.com should work with Windows 10. Just watch for those who require a 300 watt power supply system or less.

  Drivers for these cards may be on the page drivers GeForcefunds. Simply select the card in the drop-down list or use the "Auto-Detect".

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Tecra M2 suddenly does not work with power supply

  Hello

  Suddenly my laptop does not work with power... (with the battery, that it works very well)

  The power supply works fine.

  Someone at - it an idea for this error?

  Winni

  Maybe the DC-in port has no contact with motherboard anymore and the electronic board can not get AC power.

• Satellite L500 and problems with the Wi - Fi

  Hello people

  I'll just throw my problem there.
  First of all my details and information that can help me to help you!

  Satellite L500 running windows 7 (note: same problems when installing Vista)
  Latest drivers wireless as well as the latest drivers for everything.
  My wireless router is 1 billion active voip 7000 series sound quite good for when I got it about 2 years ago and works well.

  Basically, the problem is that the wireless on my Satellite L500 keeps dropping out. I m not more than 20 meters at most, right now I m 10 m with 1 wall in the way. I tried to make a website, and he says has fallen to either unable to find host connection.

  However other computers laptops in the same room, same place at the same time has no problem at all. Has ever.
  As soon as I'm in the same room as my router, it works again. Sometimes works if I stand right on the opposite wall.

  So basically I m thinking my card wireless in my laptop is defective or simply not good?
  Can u replace the card with another wireless? Maybe the Toshiba ones are just no good? I read so many problems with these cards Toshibas wireless...

  Anyone have any ideas? I ran out of the info you need? I repost he's again in a day or two with the types of wireless devices in every laptop.

  Hello

  For the moment, I doubt that your wireless network card is broken. Before Exchange you it you must also update your BIOS and not only the WLAN card driver. Two updates you need to download it from the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  I had a similar problem with my Toshiba laptop and WIFI connection. The problem was in the WLAN energy saving mode Windows power management. Here, you can also choose a mode for energy saving wireless network card. Turn it off, and then choose a maximum Performance.

• Confused with power supply

  I was customizing PC 810qe WANT and I got the GTX770 GPU. Now, I know there are at least 600W PSU, but I didn't see an option anywhere to choose the power supply. The PC automatically comes with the appropriate power supply or I will eventually have an underpowered PSU?

  Hello

  Well well, not automatically, BUT it has 600W power supply as shown: (Ahmed down)

  http://www.shopping.HP.com/en_US/Home-Office/-/products/desktops/HP-envy/G5B64AV?HP-envy-Phoenix-810qe-desktop-PC

  Ports

• 18.5V and 19.5V power supply compatibility, nc4200

  Hello

  I have a notebook nc4200 who needs a new power supply.  I chatted with a HP consultant and he said I could use one of the new 90W slim smart adapters for it, but who has 19.5V output (whereas the original adapter 65W 18.5V).  Smart «Say» network adapters they are retro-compatible with all professional laptops from HP.  How is it important to make coincide the tensions?  The laptop can compensate for differences of +-1 volt?  Thank you!

  Hello

  For voltage, + or - 5%-7% is ok, for power 90W is much better than 65W. Should be allowed to use the new charger.

  Kind regards.