Product code reinstall CS4 is not recognized
My hard drive crashed on my iMac. I managed to restart on and external with El Capitan 10.11.4. However the product code is not recognized on my CS4. Help, please.
Graham
first of all, How to open third-party developers not identified in Mac OS X applications ' Mac Tips .
then, find the serial number of your product Adobe quickly
Tags: Adobe
Similar Questions
-
I bought the DC of Adobe Acrobat pro and completed the info online, but when I use the cd with the product code key it will not take the code? What do I do then?
Thanks Anubha Goel, final I got it to work... The serial number in the physical box that you buy in the store wasn't the number for the software. It was the serial number in the cloud, very difficult to know when you see a serial number in the box with the Cd online. But thanks for the reply to my post. I'll be in offline mode after clicking on answer... Thank YOU Ana Maria
-
Product key of Windows 8 not recognized
Hello, I bought the laptop Sony Vaio with pre-installed Windows 7 Home Basic (64-bit) and subsequently upgraded to Windows 8 Pro purchase online, then to 8.1 - courtesy of Microsoft and finally to 10 Windows - all were working well. Recently I had to format and install by default. Everything was fine and worked well. But when I tried to upgrade to Windows 8 Pro with my product key purchased, during the upgrade, it says that the product key is incorrect. I had checked and re-checked reception P key, I got saved in my folder and found it very well. However my several attempts proved futile, and I couldn't move to Windows 8. Someone please help me with a solution and force. BTW, sorry my English is not good. Thanks in advance and best regards.
You can get the 10 Windows installation here, media https://www.microsoft.com/en-ca/software-download/windows10
What is classified just Windows 10, is a multi ISO edition that can install Home or Pro. I use the option create a media and make a bootable USB thumb. Then do a clean install. Another thing probably just modernize you home. Boot from the USB key, simply run setup.exe from windows. When you are installing, select Pro, click on ignore when it asks for a key. It will activate with your digital documents. There is a checkbox on the download tool when you run to "use the recommended options. Uncheck that box and you will get full menus for the version and language. If you don't see the options you want.
In this situation where you arrived home, but must have got Pro, you can make a change product code and enter this code VK7JG-NPHTM-C97JM-9MPGT-3V66T. It will be upgraded to Pro and then with digital law. My laptop has a Core 8.0 OEM key. I get 10 home automatically. I upgraded originally from 81. Pro. I had to do the above to retrieve my Pro.
http://www.tenforums.com/tutorials/1950-Windows-10-clean-install.html
-
I am trying to install CS4 on my Windows XP computer, but when I put the CD in the drive the floppy disk is not recognized. In fact the disk does not appear to 'see' one of the disks that came in the package. The reader has no problem with the audio CD or CDs containing other programs. I also tried the disc in the DVD drive of the computer, but no luck.
To complicate the foreign disks CS4 seem to work on computer (most recent) well my wife.
Can someone tell me what is happening?
For starters, the disks are DVD not CD!
Second, your old computer may miss a few update needed to play the media.
Can you make a copy of the package on your hard drive and install from there?
-
I tried to go on the email to try to get the product code, but it wouldn't let me
Hi TerraLease,
(a) if it works well before? What were the changes to the system between the time where everything has worked, and when you noticed the problem?
You might want to know
How to identify, locate, and replace a product key
http://support.Microsoft.com/kb/811224
How to get a new product key for a Microsoft Office product
http://support.Microsoft.com/kb/823570
You receive an "invalid product key" error message when you start an Office program after you install a suite Office
http://support.Microsoft.com/kb/836178
If you have any questions, please visit the link below to find a community that will provide the support you want. Be sure to specify the desktop version, error message, and the recent changes on the computer.
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
CS4 DVD not recognized on OSX Lion
Hello
I just did a clean install of Lion on my mac and tried to install CS4 master collection from the dvd I have, but whenever I insert one of them ask the computer "what to do with this blank dvd...
I tried all other dvd to make sure the dvd palyer fine works and it works very well.
I tried to install on a macbook backup I have and it works, but unfortunately I need installed on my main machine...
Any help would be appreciated.
Thank you
Don't know this one in particular, but there is a list of the known issues with Adobe found with their products on Mac OS 10.7 Lion:
Software Adobe Creative Suite is compatible with Mac OS X Lion (v10.7)?
Adobe and Apple have worked together closely to verify editions on Adobe® Creative Suite® 5 and CS5.5 and different product performed reliably on Intel® based systems running Mac OS X Lion (v10.7) with optimal performance and user experience. Earlier versions of Adobe Photoshop® (CS3 and CS4) software have also been tested with Lion and the issues that have been discovered are documented and addressed in close cooperation with Apple.
See the article in the knowledge base for known issues in our tests, we discovered.
As with any new version of the operating system, there may be unexpected issues that arise that were not discovered during testing. If you have problems, report them on our bug report form.
-
Webcam stopped working says insert USB after that reinstalling but being not recognized help pleae
I have a new computer, webcam stopped working, I reinstalled the software screen indicates it has been reinstalled ok but when I try to use the camera it says on screen no device connected to the usb. help please.
Hello
1. what operating system is installed on your new computer"? XP, Vista or Windows 7?
2 do you see anything unusual (yellow bang) in Device Manager?Assuming you are using XP (because the thread is in the XP category), I suggest you follow the steps below.
Step 1: Use Device Manager to find the hardware changes
Use Device Manager to find the hardware changes. After your computer search the hardware changes, it can recognize the USB device connected to the USB port so that you can use the device.To check the hardware changes, follow these steps:
a. Click Start and then click Run.
Note If you are running Windows Vista, click Start and then use the search box.
b. type devmgmt.msc, and then click OK. Device Manager opens.
(c) in Device Manager, click on your computer so that it appears highlighted.
d. click Action and then click Scan for hardware changes.
e. check the USB device to see if it works.Step 2: Remove and reinstall all USB controllers
To remove and reinstall all USB controllers, follow these steps:
a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.
b. click on the Hardware tab.
c. click the Device Manager button.
d. expand Bus USB controllers.
e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
f. restart the computer and reinstall the USB controllers.
g. plug in the removable USB storage device and perform a test to ensure that the problem is solved. -
I changed the case of a letter in my code and DW is not recognizing
I get the following error:
Warning: mysqli_connect(): (HY000/1049): unknown database 'vba2015_usermaster' inC:\wamp\www\VBAMF\Connections\mysqlitest.php on line 3...
However, my code is composed as follows:
$conn = mysqli_connect ("localhost", "root", "","vba2015_userMaster");
Note the two red areas...
It's on my test server (wamp). The correct format is a CAPITAL M, but DW will not recognize the shift. With the help of DW CC 2015.
Any help would be appreciated.
This error message is not from Dreamweaver, but MySQL. You are using Windows, so the default of MySQL is to store the names of database and table in lowercase and treat them in a case insensitive way. See MySQL: MySQL 5.6 reference manual: 9.2.2 identifier case.
The recommendation for MySQL is to use the tiny all table and database names. This ensures maximum portability between operating systems.
It doesn't seem to be an error in the line of PHP code that paste you here. The problem must be in the name of the database. PhpMyAdmin allows to check if it has been created.
-
pass code for id touch not recognized
New iPad Pro, spent by the program installation, entered code pass for Touch ID or I pass wrong initially to key in the code or pass unrecognized code. disabled iPad. What is the next step to activate? Grateful for the help. Cheers, Chris
Follow the instructions on this page: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports
-
error code 43 when USB not recognized
OKAY - found this on another forum - I had a problem serious error 43 and nothing would not work out of the USB. The suggestion was that this is a motherboard problem and cannot it shut down the computer reset. So, unplug the computer and then remove the battery for a minute or two, then restart. It worked for me. Had to reconnect each usb device and restart every time until it reinsalled as usual. Hope this works for you, it has saved me a lot of money and aggravation.
Hi Bob,
Thanks a lot for this tip five years ago. I had problems today with the USB hub built into my HP LP2480zx monitor. I unplug the monitor one PC approx. 10 minutes of power and then restart - and correct all USB work! Thanks again for the information.
Connect your device
then
(1) go to the control panel and open Device Manager
(2) find other devices and click all unknown devices
This should install the devices and solve your problem
-
I am trying to record the product key I PAID for the code and it is not recognized.
Pls help.
Hello
· Were there any material changes made to the computer?
I suggest you try the steps from the link: you receive an error message after you enter the product key when you try to install Windows XP: http://support.microsoft.com/kb/310637
-
How can I reinstall windows xp on my laptop? I have a product code, but I do not have a disk.
If Windows XP came pre-installed on your computer, contact your computer manufacturer for a replacement installation disc. If you purchased a retail version of Windows XP, contact Microsoft.
This article in the Microsoft Knowledge Base has the details: How to replace Microsoft software or hardware, order service packs and updates of product and replace product manuals Boulder computer Maven
Most Microsoft Valuable Professional -
Product Code do not accept CS4 Master Collection. Why?
I try to install my CS4 Master Collection, so that I can upgrade to CS5, but my product code allows me to continue. I only installed it on another computer. It does not provide an explanation, it shows only a red 'X' after the code that I'm going home. Is there an explanation? Thank you.
You must use your mc cs4 serial number, quickly find your serial number
and you do not need to install cs4 to install a cs5 upgrade. You can start with your cs5 installation and you will be asked your serial number cs4, after entering your serial number cs5 upgrade.
-
Hello
I have a suite of master collection cs4 for 1 user install in the computer.
But that if the fall down and reformatted computer, would it back means I'm not able to reinstall cs4?
Or would that mean I can't reinstall cs4 with initial registry given by product initially for installation code.
We hope to receive soon the comments and answers.
Greatly appreciated.
Thank you.
Hey Yuki,
You can download CS4 from the direct download links available at: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
But make sure you follow the steps mentioned on the page before you start the download.
You can then use the serial number purchased, you need to activate the software.
-
I wiped my pc and my windows vista. How can I get a copy, reinstall.i have the product code?
Hello
If Vista is preinstalled contact the Manufacter computer and ask them to send recovery discs; what they should do for a small fee.
And ask them if you have a recovery partition on your hard drive to reinstall the operating system to how it was when new.
If you have not deleted this partition (you tell how wipe you the hard drive!) you press F10 or F11, etc at startup to start the process of relocation.
Ask the manufacturer for their combination of button to do this, if it is always an option for you.
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
See you soon.
PS You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista must be installed. The product key determines which Edition is installed.
Builders recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Maybe you are looking for
-
HP ENVY 17-3011er: installation of more than 8 GB of memory
Hello.
-
Photostory 3 on preview leaves the program
I have several computers (out of 30) in a laboratory where clicking on the preview makes the program stopped. We are Windows XP and all 30 computers must be configured the same. This occurs even after the recording of the photo Story and when there a
-
I have a laptop HP pavilion dv 5. With windows vista. My dpi is set to 96 and I played with the resolution. My problem is that Nothin fits the screen. Everything is on a large scale. I use a horizontal scroll bar to view all the material. I have not
-
I want to have a similar effect in the file selector. It shows a new worksheet for each hierarchy of folder, you select, but when you click on cancel all leaves are closed at the same time. I have a workaround where I call a closeSheet() on a sheetBe
-
My Blackberry Curve is constantly updated from the Exchange Server at work, but I would like a one-way sync from my Blackberry to my Outlook at home for the calendar and Contacts. When I try to do, the Blackberry Desktop Manager tells me that ' if t