Product name: HP Envy 13 t-1000: updated HP Envy 13 t - 1000 CTO Notebook SSD

Similar Questions

• need to reset my HP ENVY 17 t-k000 CTO Notebook PC (ENERGY STAR)

  HP ENVY 17 t-k000 CTO Notebook PC (ENERGY STAR)

  I need a recovery kit for my cause of laptop I did upgraded for Windows 8, Windows 10 but it shows not winth 10 windows partition so I can't launch the LT.

  I have contact the HP SUPPORT but no way of didn't have the recovery disk set... can anyone here like me where I can buy it

  Hello

  If you definetely can't get HP recovery media, here are a few suggestions.

  1. if you live in the United States, try the 3rd dealer part on the following link.

  http://www.computersurgeons.com/default.aspx

  2 as long as the previous installation of Windows 10 had activated Ok after upgrade from 8.1, you can simply perform a new installation of windows 10 as stated in the guide on the following link.  Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• ENVY 17 t-k000 CTO: can I install an mSATA ssd in my HP ENVY 17 t-k000 CTO Notebook PC?

  Can I install an mSATA ssd in my PC HP ENVY 17 t-k000 CTO Notebook? Added a SDS SATA 250 GB and 8 GB memory chip today but don't can find any way to add also a 250 GB mSATA SDS. I looked on the side in front and back of the system board.

  I would return the mSATA EVO 840 Samsung SSD, I bought from Newegg?

  The repair is no help whatsoever. It is said a WSSD m2 is supported 'model', but there is no picture of it in the manual or the indication when it is on the models 'select '. Those who have it use a version of m2 (connector three blades 2 not) so your Evo 840 would not work even if you had one of the models 'select '. I think that on those who have it that the port m2 is located on the motherboard so if you don't see it you are not among the selection.

  Manual, FWIW

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• The HP ENVY 17 t-k000 CTO Notebook PC support 2 internal drives?

  I have a Samsung 1 TB SSD 840EVO I want to position as boot drive and use the existing 1 TB internal HDU as the backup. The HP ENVY 17 t-k000 CTO Notebook PC will support two internal drive? I have the 17 t WANT to HDDSSD Solutions and cable assembly cart.

  PLD2 wrote:

  I have a Samsung 1 TB SSD 840EVO I want to position as boot drive and use the existing 1 TB internal HDU as the backup. The HP ENVY 17 t-k000 CTO Notebook PC will support two internal drive? I have the 17 t WANT to HDDSSD Solutions and cable assembly cart.

  For the HP ENVY 17 - k000 Notebook PC model, there is No second Bay of disc - hard

  

  Your model is customized model ("17 t-k000 CTO") this series of basic model, it will not be a secondary HARD drive Bay.

  To confirm, you will need to open & see-

  To get into the HARD drive, you have to-remove the battery, the optical drive, rear corner covers, hood & USB card.

  Contact HP for more details about your specific model.

  Kind regards

• Laptop HP ENVY 15 t-k000 CTO: add additional SSD for HP ENVY 15 t-k000 CTO Notebook PC (ENERGY STAR)

  Hello.

  I have my laptop new HP ENVY 15 t-k000 CTO Notebook PC (ENERGY STAR) yesterday itself. He already have writer BRD. Can I replace my BRD burner with extra HD SSD? If yes what is the procedure for that?

  You can, but you shouldn't. The port for the optical drive is a SATA-I have the interface. Slower than the port for HDD/SSD. So if you want to just add storage put a regular mechanical training in an optical drive adapter. Also any drive in the optical drive adapter will not be bootable. This will help you:

  http://support.HP.com/us-en/document/c04334360

  http://www.eBay.com/ITM/new-SATA-2nd-HDD-SSD-Caddy-adapter-for-laptops-9-5mm-optical-hard-drive-Bay-F-HP-/221242700734?PT=LH_DefaultDomain_0&hash=item338317b3be

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Envy 15 t-q100 CTO Notebook: how to order recovery usb.

  HII,

  I have HP Envy 15 t-q100 CTO Notebook pc it came with pre installed windows 8.1.

  After 2 months I want to downgrade 8.1 to 7, while it downgrade I lost my restore disk, how do I order my recovery usb for windows 8.1 licensed version.

  But that's a problem, I bought this laptop from USA and now I am in India.

  So, how do I order these usb of the India recovery. HP it only sends to the United States.

  Please help solve this problem.

  Hello

  If you have a person in the United States, you can order the recovery disk and then get delivered to your address in India. Because HP cannot ship the drive recovery in the India. You can place the order by following the steps listed in the link below or by calling HP Support

  http://support.HP.com/us-en/document/bph07143

• Install the new hard drive in a HP Envy 17 - t - k000 CTO Notebook PC

  17 t-K000 CTO Notebook PC running Windows 8.1 envy

  The bottom of my laptop is not the access port with the J100 Quad Core.

  I want to install an SSD in a drive Bay 1 (port 0) and the HD in the drive Bay 2 (port 1).

  I pulled each screw on the merits of the case, and I can't figure out how to open the casing without damage.

  What should I do?

  Problem solved!  Video already found on the HP Site.

  Mike.

  I just showed the steps needed to go all the way to upgrade the memory.

  First step is to remove the top cover.

  http://support.HP.com/us-en/document/c04339451

  I have the 15 t, but found the same instructions step by step and video to replace the hard drive for the 17 t.

  http://support.HP.com/us-en/document/c04337198

  Let me know if you need advice.

  REO

• Product name: HP ENVY 17 Noteb: windows 10

  I up graded my HP ENVY 17 Notebook PC windows 8.1 for windows 10. When I restarted the system windows 10 has worked well but I found a software had been deleated. specifically all the cyberlink software had disappeared. How can I get it back? I would like suggestions.

  Here is the link which is 8.1 windows updates and download of hp, but I believe it can work and you can try it

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-17-notebook-PC-series/5354973/model/5395394#Z7_3054ICK0KGTE30AQO5O3KA30R1

  Maybe it's not the right pc but you can go to hp and go to support and let it automatically detect your device and once you get to where there are updates and it will be noticed that it is window 10 and check and select windows 8.1 and go from there

  and he will be under the software - media

• Product name: HP ENVY 15 No. TS: docking station for my laptop HP ENVY 15 TS

  I just bought this laptop and I need to buy a station of dociking to it.

  With my previous laptop was a connector on the bottom which would align with the docking station and to operate.

  The HP ENVY 15 TS laptop does not seem to have special connections. What dociking it uses station?

  Thank you

  Consumer laptops no longer have an option for a dock "bring down" which is a shame but the standard in the industry today. HP Business models have this option. The only thing that you can use with the consumption patterns is a USB 3.0 'docking station' which is a misnomer because they are really 'port replicator. However, USB 3.0 has a bandwidth sufficient to reproduce all the ports on the laptop so that they can have gigabit ethernet, sound and video quality even multi-monitor which works very well.

  Something like this:

  http://www.Amazon.com/HP-Replicator-docking-H1L08AA-ABA/DP/B008KMDVME

  

  See, this one has 2 x usb x 2 2 3 usb, audio, ethernet, hdmi and displayport. It has its own power when you connect laptop connect two cables from the laptop... of its own power cord and then plug into a usb 3.0 port on the laptop. Almost as fast as "align to the bottom."

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Product name: HP ENVY 15 x 360: Mute LED does not work

  My mute led (F6) no longer works. The mute real works but not the LED is orange. I have read other forums about this, but they were out of date and do not fix my problem. Help, please.

  Hello
  
  Try the following.
  
  Download Realtek HD Audio Installer on the link below and save it in your downloads folder.
  
  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66250.exe
  
  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers. Right click on the Realtek audio device and select uninstall - also, you should get a command prompt to delete the current driver, check the box to enable this and then proceed to uninstall.
  
  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66227.exe

  After reinstalling Chipset, stop the laptop - for this by holding down the left SHIFT key you click Shutdown to temporarily prevent a boot hybrid.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu. Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER. Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation. When it finished, restart the computer before checking if the 'secret' led works now.

  Kind regards

  DP - K

• Product name: HP ENVY 15 Noteb: recovery after upgrade to 10 section

  Upgrade to Windows 10 and I was wondering about my recovery disk section. He is also upgraded to 10 or if I used it, it is up to the plant win 8? Should I remove if it is always 8 and free up more space on the C: drive? I don't plan to return to 8 at this time. Appreciate any insite on this matter and thank you

  @John933

  http://blog.LapTopMag.com/delete-Windows-old-folder

  REO

• HP ENVY 15 t-q100 CTO Notebook: Bios Update to the latest version

  I have BIOS version f.22 Rev.A already installed on my laptop. However, I was wondering if I can install the latest version provided by hp which is f. 63 Rev.A on my laptop. The supported version in the drivers and downloads for my product is f.22 but I wanted to know if I can install the new bios on my laptop.

  Here is the link for the bios I'm talking about: http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_169818_1#tab-history

  Hello @parth017

  Thanks for posting in the HP Support forum. Welcome!

  I would like to ask you why you want to update the BIOS?

  Personally, I don't recommend do you it unless you're having problems with your existing BIOS and you are sure that the new BIOS will fix it.

  General recommendation I provided to users/customers is NOT to upgrade the BIOS/UEFI, unless they live any sort of BIOS/UEFI problem specific. Just for updaing and update just for the use of the latest verson is not the solution. Any type of update (no matter what and that relesed it) can solve 2 problems but can introduce more than 10 questions. In addition, upgrading the BIOS (for any provider) are risky more because the BIOS recovery is not that easy compared to updates of typical software IF something goes wrong.

  It goes the same for Windows updates, OS update, drivers, etc - update/update updates IF you have any questions, you know are fixed in the new version or for some serious security problems. Otherwise, keep the existing version as long as possible.

• HP ENVY 14-1000 CTO Notebook: fact ENVY 14 t - 1000 CTO (2010) have UEFI firmware?

  This model (from worms 2010) he UEFI firmware? I don't see any indication that it made, with Windows, information system, the Mode "BIOS" is "legacy". I do not see switches to BIOS legacy in BIOS emulation is set up.

  But this would be the case of paranoia, that there no UEFI firmware, but I did it is legacy emulation mode continuously or something?

  Confusingly, the Web site offers an enigmatic named "HP update BIOS UEFI." Just an update (which I was not able to install) it changes from one thing to another?

  It was an interesting experience.

  He was able to start the "HP PC Hardware Diagnostics (UEFI)," How about that?

  So, the answer is that it can start binary EFI, but there must be another reason that my operating system is not booting in this way.

• HP ENVY 17 t-k000 CTO laptop: HP ENVY 17 t-k000 CTO Notebook PC (ENERGY STAR) Bios Update Question

  My Hp Support Assistant wants me to update my bios...

  I have two questions regarding this.

  1. the software to Flash the bios is not compatiable with windows 10.  It will be safe to run anyway? (Yes, I have installed a free update to windows 10)

  2 sp71055.exe f42.ap1 (corresponds to the file, it is recommended to run to my i7 from intel, patch notes (always never enough information) provide that it restores or that it provides the original bios.)

  My bios version connected is

  BIOS version / date f/34. 12-19-2014

  On a previous occasion, I thought I already flashed the bios and I was wondering if I need to restore to the original version, or it turns out is a bit 'off '.

  The link you have provided updated the bios with no ill affects (for now!) Thank you for your help

• HP Envy 13 t-1000 CTO Notebook: upgrade memory for VK918AV (HP Envy 13 t-1000 CTO Notebook PC)

  Is it possible to (reasonably) to upgrade the memory on these laptops?  The guide of the online maintenance I found indicates that there is 1 GB on the system board and supported a location of memory that supports up to 4 GB, but it is referenced as "not accessible, extensible client."  I'm in disbelief that books of envy is not extensible.  Does anyone have experience or knowledge with the VK918AV?  Thanks in advance for any idea!

  Hello

  Page 4-26 shows how and it is a design, very quick to add RAM. Please check the part # on the same page. It is old so no warranty available.

  Kind regards.