Profile of lenses in ACR does not. Help, please.
Hello
CS5 Extended
MBP 10.6.3
ACR 6.1
Although he had worked before, now when I open the "lens" tab in ACR I don't get the options of "profiling". Previously, it would find my objective and correct it. Now, these features may not appear at all.
Instead, all I have is the choice the vignetting and chromatic aberrations.
I know I'll have a gray now, but I just can't understand it.
What I am doing wrong?
Thank you.
prairiefiretexas wrote:
What I am doing wrong?
You run not Camera Raw 6.1. You are either by the original ACR 6.0 (which was the old style lens Corrections) or are not Photoshop CS5 running.
Tags: Photoshop
Similar Questions
-
width of 100% does not, help please?
I hope that this picture will help to show the problem I have, I will paste the code I up this just in case it is not readable in the picture also.
I'm working in Dreamweaver CM³ (updates) on a 64-bit Windows 7 platform. I built a dozen web sites in dreamweaver, so I'm not an expert, but I'm not either totally distraught. I did what I'm trying to do on other sites, I'm completely stumped on what I'm doing wrong here. Any help is appreciated!
So, it's the intro! Here's what I'm trying to do:
I want three background divs that are stacked on each other, with three of them covering 100% of the screen, regardless of the size of the screen (have not implemented for media queries yet go smaller, right now just trying to put it so circles fill all the screen sizes)
If the top bar is the Tan, then the central bar is dark brown, and the lower bar is yellowish. At the beginning I did not apply any width of 'body', but I tried to set it to 100% as well. Each of the three background divs have been added then, and all three were set at 100%, with an image in the background (for texture and color) set to repeat everywhere.
No matter what I try, the three bars appear to have a limit of about 740 pixels width. It is not a setting I've ever created, and I started the page as an html page empty - not any model. I can't find which requires this setting width on these items.
Here's the weird thing... it really works on a big screen - the bars go all the way through... it's on small screens (my test of fifteen inches, my iphone, the ipad screen monitor) that the background is not going anywhere!
The image in the header (all images are just an image) is 1280 pixels.
I'm sure someone will point me to something that makes me slap my forehead in total embarrassment, but I would gladly take the humiliation of being able to move forward on this project! Help?
Thank you
Michelle
I did something like this for a client project (view source to see the code):
http://ALT-Web.com/test/LHS-test.html
Nancy O.
-
Just today my wireless worked perfectly no problems at all. And then I'll be back from College 4 hours later and it seems not to work more, I called cisco and they want to charge me to fix it, and I don't have the money for it. I tried reseting the router (by pressing the small button with a paperclip for 30 seconds). And I also unplugged and plugged back in and still nothing. I called my internet provider and my modem works fine (im actually writing this with my laptop plugged directly on the Ethernet modem). Could you guys help out me? exams are coming and I can't continue to take turns using the internet with other people in my house, and I can't continue to go to the library to study and do homework. Thank you, you have no idea how grateful ill be if this is resolved btw, I have a cisco linksys E2500 series wireless router
If you have an extra ethernet cable, you can reconfigure the router manually. For step by step instructions you can check homesupport.cisco.com. You can also download this Web site configuration wizard.
-
Browser is stuck in mode full screen, restart does not help.
I entered the mode full screen on a website and now cannot get out. Restarting my computer does not help. Problem is that when you are using Firefox, no other browsers. Firefox continues to open full screen mode whenever I open it, and I have to reboot in order to use another browser.
Try to rename (or delete) the file xulstore.json in the Firefox profile folder.
You can use this button to go to the Firefox profile folder currently in use:
- Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
- http://KB.mozillazine.org/Profile_folder_-_Firefox
-
Install new FF4, back/transfers and Refresh buttons does not - help!
New installation of FF4.0 the forward/backward buttons and refresh from line. They do not work.
I tried:
restart
relocation of
start in safe mode
remove places.sqlite and restartAll to nothing does not. Any ideas anyone?
Create a new profile as a test to see if your profile is the source of the problems.
See:There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins»
If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)
See:If this does not help, then do a clean reinstall.
- Download a new copy of Firefox and save the file to the desktop.
- Firefox 4.0: http://www.mozilla.com/en-US/firefox/all.html
- Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.
- Do not remove the data of a personal nature if you uninstall the current version.
- It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
Your bookmarks and other profile data is stored elsewhere (not in the Firefox program folder) and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.
-
I have 4 accounts and about 30 local folders. Thunderbird is stuck with an open local folder. Cannot access any other page, or all accounts. Reinstall does not help, or don't restart the computer. I have Thunderbird 31.5.0 on Yosemite 10.10.2.
Turn your folders pane. Component presentation-file to display if you are using the menu bar.
If you use the AppMenu button it is button AppMenu
Hover over the Options
Component layout page-folder -
Print Help does not help me open downloads on my android
Cannot retrieve or open downloads. Printed text does not help because I can't find the button
You are able to use the menu in Firefox for Android? On some devices, a stack of 3 points appears at the right end of the address bar to display the menu, while on other devices, there is a button to (touch capacitive) of 'material' to the camera button at the home to show the menus.
In the menu, you should find under Tools downloads.
In addition, by default, Firefox uses the download system folder, so if you open the download application that comes with your device you should find them there (in general).
A little luck?
-
Firefox worm 25.
It downloads the pages slowly. I started it without plugins. I've updated all the plugins.
Sometimes Firefox Watch window 'Script on this page may be busy... ". «The status line showes "transfer data of...» »I would like to thank Christophe.
I did everything you mentioned, but it does not help.
I found the solution. The steps are:- 1 change of security for adobe flash in the C:\Windows\System32\Macromed\Flash\mms.cfg file add the line ProtectedMode = 0
- 2. set in Firefox Subject: config change dom.ipc.plugins.enabled to false and dom.ipc.plugins.java.enabled to true
- 3 disable hardware acceleration (advanced - general - settings)
I guess only the first step and half of second if enough.
We thank Assistant. My request can be closed. -
I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?
Try the following. It seems yo may have to let the battery drain is completely:
- iOS: do not respond or does not light
-Also try DFU mode recovery mode post-test
How to put iPod touch / iPhone in DFU "Karthik doodles."
-If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.
-Try a different cable
-Try on another computer
S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.
-
my audio does not work please help
my audio does not work please help. Thank you!
Hi no thanks,
1. What is the brand and model of your system and sound card?
2. when the problem started?
3. did you of recent changes to the computer?
You can try to run the sound troubleshooter and see if it helps.
For more information, you can also consult the following article:
Tips for solving common audio problems
Hope this information is useful.
-
When I bought and installed my Pro Deskjet 8600 in last July, a wonderful control program has been installed. However, the shortcut on the desktop for this program has disappeared, and I can't. Re-run the installation program does not help. How can I get that back. All I have now is an older version of the HP Solution Center, which does not have the features that I got into the habit of.
Hello
Uninstall the software by following programs > HP > HP Officejet Pro 8600 > Uninstall.
Then download and install the latest version of the software below, it is a more recent software and should solve the problem you are experiencing:
Shlomi
-
Computer HP laptop window vista does not load please help
someone asked this question and I have the same problem!
I have a laptop HP who have dirtied pre-installed Vista and for some reason after installing automatically 3 updates the other day, he is not now charge up. The laptop is plugged in so it can configure 3 updates without failure (due to something like battery dying).
When the laptop turns on, it gives me two options:- Start the reboot system (recommended)
- Start Windows normally
If I click on 'Launch Startup Repair', he comes back to do the same screen with them two options and when I click on "Start Windows normally", the laptop everything restarts and then return to this screen.Thus, F8-ing it does not help either - it gives me options like computer repair, Mode safe mode, last known good, etc... but none of these helped either.I looked around online for a solution, but most say on the use of the Vista installation CD, but the operating system is installed on a partition on the laptop (also there are files on what I would come down)... However I do not know if I can get it to boot on the installation partition eitherI tried F8, F11, F12 and nothing worksIf the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Data recovery:
1. slave of your hard drive in another computer and read/save your data out there.
2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.
3 Alternatively, use Knoppix Live CD to recover data:
http://www.Knopper.NET/Knoppix/index-en.html
Download/save the file Knoppix Live CD ISO above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://isorecorder.alexfeinman.com/isorecorder.htm
Download the Vista software from the link above.
After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.
Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.
Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.
Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.
When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.
Click on the icons of hard drive to open and to understand which drive is which.
Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).
Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
See you soon.
Mick Murphy - Microsoft partner
-
Hello support,
I use my MAC for the BlackBerry Desktop Manager 1.0.3 (16) for Mac. I've updated my BB9700 5.0.0.351 to 5.0.0.59 3. I use Mac OS x 10.63 32 bit. My Blackberry synchronization but calendar entries.
I am a customer of T-Mobile. (Prosumer)
When I try to synchronize my contacts with my Bold 9700, comes after a few seconds, the message "sync error has occurred - you try to synchronize again.» But a resynchronization does not help. A couple of contacts (20%) are transferred, so the process is canceled again and again. undecided
Please help me!
HI and welcome to the forums!
Let us know how it goes!
Thank you
Bifocals
-
Hi my audio - pc does not work please help me
Hi my audio - pc does not work please help me
Uninstall the driver, reboot the system. The attempt to install the same driver for Windows Vista using Windows troubleshooting. Make a right click on the file executable/installer driver-> properties and select the Compatibility tab. Click on the box to check run this program in compatibility mode for option and select Windows Vista from the drop-down list. then try to install the device driver using run as administrator.
Resources:
If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.
Open the troubleshooting of Audio playback
http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
In Windows 7
Click Start > Control Panel
Click on hardware and sound
Under sound, click on manage audio devices
Under playback (tab)
Choose speakers you have in your output device
Click Properties >
Click levels (tab)
check if the value is 100% >
GoTo Enhancments > select Loudness balancing
Apply and OK
Should be much stronger now...
For enhancment bit,.
and if you have HD realtek soundmanager (R2.37) in your control panel
Try a classic Equalizer setting
-
Applications in the cloud creative section does not help
I can't download apps on my computer, why?
If this does not help, explain what you see in the applications tab.
Using creative cloud | Download error in the applications tab of Creative Cloud Desktop Application
Maybe you are looking for
-
email does not work in firefox
I have three emails from domain, in which one of them stopped working with firefox. All three works with internet explorer or google chrome. There is one who does not work with firefox.
-
Tecra M11-LaTeX runs slow on external monitor using Express Port Replicator
Hi all I am having trouble with my Tecra M11 with an external monitor, through an Express Port Replicator II. It is very accurate, but I am running texlive 2010 on my laptop to write a thesis. Whenever I use my laptop screen feature is very good, and
-
Satellite A200-1FL (PSAE6) - FN key does not work on Windows 7
I have just installed Windows 7 on my laptop and I can't do touchpad Fn key works. I tried to install the drivers from the Synaptics touchpad, but it does not work. What can I do?
-
Why do I need to use "disable driver signature enforcement" option at the start of my window?
I'm on windows vista Home premium 32-bit / laptop I had a problem with my "encryption" service & cannot install update. I found online gace and solve this problem. I have the windows update and install Microsoft security essential program. When I res
-
Agent properties is not displayed in Foglight Console
Hi all.. We are facing some problems with the dashboard properties Agent because he receives any shown in the Console... Please help us to solve and try to understand the problem. Kind regards Guenoun