Tecra M11-LaTeX runs slow on external monitor using Express Port Replicator

Similar Questions

• Tecra A9 - connection of two external monitors using Express Port Replicator

  Hello

  I have a Tecra A9 and Express Port Replicator.
  I'm trying to connect 2 external displays, one connected to the output of the laptop and the other connected to the docking station (notebook lid closed, do not use the laptop screen).

  I can't get to work, anyone know if this is possible?

  Hello

  I think you want to connect a VGA monitor and the other to DVI port.
  Is this good?

  Well, I found this doc:
  http://APS2.toshiba-tro.de/KB0/TSB7B0201000CR01.htm

  Depends on used Tecra A9, if you can get a picture on the DVI port on the Express Port Replicator (PA3508E-1PRP) or not.
  The DVI port on the on the Port Replicator Port Express is supported only on computers with graphics card ATI or nVidia.
  If you have a DVI INTEL graphics card port on the on the Express Port Replicator only is NOT supported.

• Unable to connect 2 external monitors via the Port Replicator using Portege Z30 - 16U

  Hi all

  I need hell, I just moved from another laptop for Portege Z30 - 16U, I spent hours trying to connect my 2 external monitors to my Replicator Port Hi-Speed III 120W, but my laptop will see a monitor.

  I used 2 external monitors with my laptop for years because I do a lot or reading and I don't want to use the one and the laptop screen.

  I tried the mixture of a VGA and a HDMI and VGA cables, but nothing works.

  Can anyone tell me how I can connect and discover 2 external monitors with this laptop and port replicator, I can't believe that this is not possible, it makes no sense that Toshiba would then technilogically behind other laptop manufacturers.

  Thank you

  Liga

  Hello

  I'm not familiar with the Z30 Portreplicator, but the general behavior of the replicators of the double-displayconnector, is that 1 can be used.
  Not 2 simultaneously.

  I could be wrong, and you should easily be able to check it out - use only 1 at a time.
  First, then the other.
  If the two works when used alone, then my suspicion is right.

  I hope this helps!

  TOm BR

• Problems with an external monitor with the Port Replicator III and M100

  Hey all.

  I just returned from a trip where I took my laptop. Plugged into the Port Replicator port, started and everything was fine. Then after an hour or two, the monitor stopped receiving a signal. I repositioned the laptop and everything was good again. He then loses signal once again, and I was not able to get a signal via the port replicator since.

  The monitor works fine through the hole at the rear of the M100.

  I checked the pins on the Port Replicator port and portable, none folded and tried to clean any dust etc. Still no signal to the monitor.

  Someone has ideas of how to do to solve this problem?

  Jamo

  Hello

  The Toshiba 3 mobile extension is responsible for the good condition of the duplicator 3 market. Try to reinstall this utility and also check the page of the Toshiba driver for updates.

• Tecra A11 for PA3508E-PRP1 (Express Port Replicator)?

  The Express Port Replicator PA3508E PRP1 can be used with Tecra A11? Given all that I have read the answer would be no, or Advanced Port Replicator or Express Port Replicator II would be necessary. But the port replicators are very similar on the upper side (connectors). Perhaps it is an old item that no one it lists as compatible more precisely?

  is that you must use compatible devices only with laptop Tecra yout and according to specification for your Tecra A11, you can use Express Port Replicator II with PA3680E-1PRP part number.

  This port replicator is designed for latest Tecra and Portege laptop models.

• Tecra A10 - 1LL - connection with the external monitor

  Hello

  I have a problem with my laptop Tecra A10.

  When I connect to an external monitor to the laptop I have to manually switch the screens because external shows nothing. When I disconnect the monitor I have to pass the screens manually with FN + F5 because the internal display shows nothing.

  My old laptop (Tecra A9 (PTS52E-0E702NGR)) is the poster automatically whenever I connected or disconnected an external monitor.

  Anyone has an idea why the A10 light automatically as the old notebook? Maybe it's the only spot in the preferences of the display driver that I don't see right now. :-)

  Hi SilverWizard,

  What happens if you try to switch on the external monitor using the options of display driver, or that this combination of buttons don t work?

  As wrote Al - eX you must update tools from Toshiba to get the keys FN working again. Everything can be downloaded here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  It's working now?

• Tecra A9 and express port replicator - two external monitors

  Hello

  I have a Toshiba Tecra A9 laptop and a Toshiba express port replicator, the Replicator has two outputs DVI & VGA, but I just can't seam to allow them both to use my funds rather than 1 desktop computer screens and the screen of the laptop.

  Is this possible?

  See you soon

  Ash.

  As far as I know that something like this is not possible. The video signal may not be spited and sent to two video output ports. If you want to use two external monitors, you need an additional video source as Toshiba Dynadock or another solution.

• Tecra A2: Question about DVI and external monitor

  Hello
  I am trying to get a DVI Signal of the Tecra A2 using the Advanced Port Replicator III but without success. The A2 does support DVI anyway?
  Another question: is it possible to set up the main display to the external monitor using "extended Desktop"?

  Thank you
  Ralph Menon

  Hello Ralph

  Your unit doesn t support DVI port and you can't use it. As far as I know just the ports that you can find on the device, you can use in Port Replicator because the signal is just loop through.

  The problem with the screen is that mobile has the main value and it cannot be changed (on my Tecra M1 nor). The windows will be implemented on an external but password box will always be displayed on the screen of the laptop.

  Good bye

• Use of Tecra M11 on Express Port Replicator II

  Hello all, I wonder if the Group of experts can help with a small problem Im having with my Ministry of the Interior

  My kit is a Toshiba Tecra M11 with Win 7 Enterprise, that I use with a port replicator Port Express and I just upgraded to a Lifebook Seimens, also with a cradle of home. The way I like to work is to use the laptop to connect Central company on the internet by VPN network and then use my PC at home to connect to the laptop via DRC - if I can use the screen Monitor wide and large keyboard (my job is very large Excel spreadsheets). It worked well with the Siemens and especially work with Toshiba, but for a small problem.

  After I have logged on to the network and connected to the laptop, I want to put the lid down, then put the laptop and its cradle of home from the road on a shelf. This has worked with Siemens, but whenever I have try with the Toshiba it puts the machine to sleep as soon as the cover closes and the DRC on the main PC session is suspended. The Toshiba is mounted on its cradle of home throughout this process. Computer laptop & cradle to host both the main pc are all connected by a wired connection to the same router netgear

  How to stop what is happening, that is how to use the device on its base of home with the lid down?

  concerning

  Mark
  Bristol, UK

  In the Windows power plan settings, you can choose the action to COVER closed. The default setting will stay and that is what you have described. So I recommend disabling this option for each Windows power profile.

  Otherwise, follow the instructions posted by Akuma. If you make an update of the BIOS, unplug all devices and close all running programs before doing this.

• Tecra M11 - 11L: no sound through Express Port Replicator II

  Hello

  I hope someone can help me.

  I have a Tecra M11 11 L with Windows 7 32-bit and an Express Port Replicator II docking station.

  When I plug my external speakers into the 3.5 mm plug on the laptop side, they work very well and the internal Laptop speakers are correctly muted.
  When I have the laptop dock and connect the external speakers to the Jack on the dock, I hear no external speaker but I get the sound from the internal speakers (i.e. they are is more silent).

  I did some research and some Dell users report the same problem with their docking stations after the upgrade to Windows 7, which suggests that this could be a driver problem Windows 7, rather than a faulty docking station.

  Someone at - it ideas?

  Thank you very much.

  Hello

  I found just the package of Windows Vista for Toshiba Express Port Replicator II drivers
  http://Support1.toshiba-tro.de/Tedd-files2/0/drvpack-20071108133820.zip

  There is no software driver Win 7 for Toshiba Express Port Replicator II.
  But this does not mean that this could be a software problem
  It is also possible that audio jack does not work as it should
  It would be desirable to test the Express Port Replicator II under Vista or Win XP

• HP EliteBook 8440p does not connect to the external monitor using VGA! Help!

  As you can read by the title, this computer does not connect to an external monitor using VGA.

  It will be not just to record all monitors in the control panel.

  Can I change the resolution, change the color, etc.. But it will pick up any display.

  -This computer has a HDMI port.

  -The Windows key and pressing P make the ring of little blue loading appear for a microsecond before nothing appears.

  -VGA cable is brand new, double male, directly connected to my Panasonic Viera 32 ''.

  -In the properties of this computer is giving an error code that this computer has no drivers. (Code 28)

  After a repair, he says "device Base system has not a pilot.

  Can someone direct me to the corresponding pages for drivers or instructions? Any help would be appreciated.

  There is probably a combination of keys specific to your model that enables / disables the VGA port on and outside.  Look in high ranking a key with a marking saucy that some how is supposed to look like a monitor.

• By using the Tecra M11 - 11J with an Express Port Replicator II

  Currently, I have the Tecra on a cooling rack, but I think to buy an Express Port Replicator II.

  The question is: the duplicator will dissipate heat from the laptop. It would be useful in this regard?

  I would be happy to comment.

  What about John

  Hi John

  I agree with Akuma. Port replicator doesn t have the vents inside and you can't wait until the laptop temperature will be reduced because of the port replicator.
  The reasons why the port replicator is are different and, in general, has nothing to do with the computer laptop cooling.

• Tecra M10 and Express Port Replicator, no DVI to Toshiba 20 "LCD output

  Hello

  As the bed of the subject line, I will put up a new Tecra M10 with the Express Port Replicator and monitor LCD Toshiba Tekbright 20 ".

  The system works on Windows XP, and the ordinary VGA connection on the port replicator works fine when connected to the external LCD.

  However, there seems to be no way to get the DVI interface on port replicator, working on the LCD.

  I tried to run this utility, and it does not detect the DVI monitor at all.
  http://www.entechtaiwan.com/util/moninfo.shtm

  I have updated graphics drivers Intel for XP, form the Web from Toshiba site and also have the latest version of the BIOS.

  Any ideas?

  Thank you very much
  Paul

  Hello paul

  Your Tecra M10 has DVI port?
  Replicator port is not some sort of converter and it will be just a loop through the signal directly from the laptop.
  If the computer laptop doesn t supports DVI output you cannot expect to get signal from the port replicator.

• Tecra A9 - Express Port Replicator: DVI does not

  I recently bought a Toshiba Express Port Replicator for my laptop Toshiba Tecra A9 PTS52E because I need DVI to connect my external monitor to the laptop Tecra A9 has only a built-in VGA.

  After you connect the laptop to the monitor I get no output on the external monitor, however. Descriptions of Replicator Port Express said that it has a DVI - D, my monitor has a DVI - D and the cable is a cable DVI - D single link so everything * should * work.
  I don't get out Visual at any time, nor in the BIOS (I can't find any options BIOS based DVI as well) or the OS.

  What is the trick to get this working? I have tested the monitor on the other workstations and the VGA out of the docking station works with other monitors as well, but unfortunately not via DVI with that I want to use.

  Hello

  Like many I know the on some series laptop Port Replicator DVI port unusable if the laptop doesn't supports this port!
  For example, the Tecra M1, M2 can use the DVI - D port and Tecra S1 cannot use it!

  Perhaps the with the Tecra A9

• Tecra A10 - 1GV and Docking Stations: Dynadock vs Express Port Replicator II

  Hello Forum;

  Official Toshiba site proposes to use the Docking Station Express Port Replicator II for laptop A10 1GV.

  I need for my construction work 2 monitors.

  My question: can I use with the Express Port Replicator II two additional monitors at the same time (there are 2 connectors (DVI and analog VGA/RGB). Is it possible to create two different images in this way?
  Some have said, that after a connection with the DVI - D VGA connector is turned off.

  Someone at - he experiences?

  On the other hand Toshiba offeres the Docking-station "Port replicator USB Dynadock U" -.
  This docking station is only connected via USB with the laptop. According to the data sheet - it provides an analog and a digital monitor with different views at the same time, up to 1920 x 1200 pix., extra headphones and 6 x USB 2.0. more network connection

  This official docking station works with all USB-connect computers, but in the compatibility list does not mention the Terca A10 and gives only a declaration of compatibility for the series Toshiba NB200 from Toshiba.

  Someone out there experimenting with this docking station?

  What would be the best way to work with two monitors + the computer screen?

  Thanks for all the good advice.

  Michael

  Hello

  As much as I know Express Port Replicator supports the simultaneous use of RGB & DVI only if the laptop itself also supports the simultaneous use of RGB & DVI.
  So if the Tecra A10 1GV would support the use of RGB and DVI port simultaneously then Express Port Replicator should support too.

  The Port USB Dynadock Port Replicator support VGA or DVI port. I didn't find the Dynadock, which was equipped with two ports together.
  The Dynadock can be connected to all computers with USB 2.0 and it beautiful s expansion.