Profile of user login

Similar Questions

• Preparation of desktop + default user login

  Occasionally, when I start my laptop Windows 7 Ultimate, instead of the 'Welcome' screen and a login prompt for the user by default ('B'), I get "Readiness Office", then the login for the user by default ('B') prompt. After a successful login, I get a new office and default user privileges 'B '. No files or other inerference profile to the default user 'B' will appear. To fix this, I restart or shutdown. Then start up, usually, I welcome and one for the default user login screen. After login, I have all the stuff for the user 'B '. It happens randomly without error message to the previous closure or the new connection. Any ideas?

  Hi BobThurmond,

  Method 1: First of all, you should try to check and safe mode if the problem persists.
   
  Follow this link provided below to start your computer in safe mode.
   
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
  Method 2: If the problem does not happen, I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  If this does not work, create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.

  Create a user profile.
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Now search for the question.

  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  In addition, You can also use Event Viewer to search for information on the problem.

  Here is an article on how to do it:

  The display of the error messages in the event viewer
  http://support.Microsoft.com/kb/947321

  You can see for more information on the issue at the time where it occurred.

  You can post this information here to help us narrow down where the focus.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Scoreloop, set the user login

  Hello everyone;

  I want to change the display/user login / drive on the server Scoreloop and I used this code:

  SC_User_h user = SC_Session_GetUser(session);
  SC_Error_t err =  SC_User_SetLogin(user, "MyLogin");
  err =  SC_UserController_UpdateUser(userController);
  

  but it has not changed on the server, although the error value is '0' which means OK.

  Thank you in advance.

  Hello, William;

  When I called 'SC_User_SetLogin' function inside the callback function it wasn't working, but when I called him in the same function as I asked the user, then it works like this:

  SC_Error_t rc = SC_Client_CreateUserController (customer, userController, RequestUserCompletionCallback, app);

  RC = SC_UserController_LoadUser (userController);

  The SC_User_h user = SC_UserController_GetUser (userController);
  RC = SC_User_SetLogin (user, "my name");
  RC = SC_UserController_UpdateUser (userController);

  In any case, I noticed that the application is connected to the game application that is installed on your device BlackBerry 10

  who, from there, the user can update his profile name and connect as will.

• image to the user login screen

  I know that this subject has been discussed several times, but I can't seem to identify my particular problem.
  On my login screen - before a user has logged in - the image of user seems to have a photo randomly.  I don't want to use that particular image, but I can't find where this image is.  If I knew where it was stored, I could at least change it.  (In fact, I like the image - I just want to be able to manipulate the picture a bit).
  And so others don't waste their time posting, I already use a USER/GUEST image file customized for users.

  Suggestions are welcome.

  I doubt that it would be in this resource, simply because it's OEM partner.  Except if you're talking about the login screen background and not user profiles (I've seen some manufacturers put their pictures there).  But no I don't know what resource profile default user picture is stored in.

  Why don't you change in the Panel?

• Pavilion p7-1235: failed to get comp boot - Windows startup, but no HP user login page

  Please read this:

  I was on Google image search and typed in a key phrase to find images.  I decided to change the sentence by moving words.  Highlighted the first two words and I wanted to drag until the end of the sentence.  When I tried, I got a message saying enter now image and image search.  It was weird.  Never seen that before.  I wasn't looking for a real image using a picture, I was just looking for pictures of architecual using key phrases.  So, I hit ESC to clear the highlight and tried typing in the search box, but it wouldn't take any changes.  I closed my browser and moved.  Started a video and the video was stuttering as he played.  Tried again and it's the same thing.  Decided he must be still stuck on the image search so I closed everything, ran a quick system if the scan and then let it stop automatically at the end of the analysis.

  A few minutes later I came back to the computer and started it.  He went to the blue screen of the HP with the hand and the flight of image files. Below it read "Press esc for boot menu."  From there, he went to a black screen and the following messages:

  Check cable connections!

  &

  Error: No boot disk was detected or the drive failed.

  I tried a few different options then found my USB stick recovery I did the day I bought the computer.  That put according to the explanations provided here in the support forums.  This time, on the next startup attempt, he showed the foreclosure "loading files" and then goes to "start windows" - it appeared that everything was fine, but it wasn't. The color Windows icons do their thing and below, he reads from windows... And then nothing.  It just sits there with the Microsoft image on the screen.  Then, this password start windows on the blue HP screen screen... Then it stops on its own and restarts the same exact process: "loading files" > starting windows > blue screen HP > restarts... Repeats.  Sometimes to where it should be, but then it looks like it not connect further.  No of HP user login screen.

  In addition, I was never able to get the HP Recovery Manager window appears.  In fact, no HP can't at all (with the exception of blue screens such as mentioned previously).  In the past, once, when I had an error in startup (for more than one year), F11 brought by the HP Recovery Manager and I could simply restart the computer from a previous restore point... In this case, he never came to the top.  I'm not a tech guy but it feels like the side system HP isn't here.

  Any help would be greatly appreciated... I'm dead in the water at the moment...

  You can try to plug the data cable into a different SATA connector on your motherboard to rule out a problem with the connector itself.

  You can test your hard drive:

  Screening of hardware failures

  If your hard drive is mechanically dead then your data it lost unless you already have saved or pay an expensive data recovery service.

  If only the operating system or a file on the disk is damaged, then you probably can data recovery by plugging the hard drive to another pc as a player sencondary to access the files.

  You can recover your system on a drive hard new with your recovery disk USB by following the instructions here. See the section: boot from USB Recovery Drive

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.

  If my answer has solved your problem please mark as the "acceptable Solution". Thank you!

• Profile of user failed to connect

  Profile of user failed to connect.  Paswor does not work.

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
  Safe Mode account has no default password (so unless someone changed
  the password should be available).

  Some programs such as the Google Updater (if you've added the Google toolbar,
  Chrome or Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7
  computer by using a temporary profile: "the user profile Service has no logon.

  Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have visited
  logged on with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  ----------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ----------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ---------------------------------------------------------------------------------------------------------

  If you can't access your old account you can still use an Admin to migrate to one
  new (remember to always leave an account Admin who is not used except)
  to test and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows XP home do not move to the user login screen too early.

  How to configure Windows XP home do not go to the user login screen after a short period of time?  Very irritating.

  Go in Control Panel > display > screen saver .  Change the settinghold and/or uncheck the box on resume, password protect . Boulder computer Maven
  Most Microsoft Valuable Professional

• Error message: the user profile service has no logon. Profile of user was not found.

  Just after that Microsoft updates yesterday we received the following message: the user profile service has no logon.  Profile of user was not found.

  The user is locked.  I tried the system restore, but the computer does not. I don't have a disk of Vista to re - install.  Peux-I re - install online?  I have the product key.

  Thank you

  Joe R.

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are running correctly.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• I forgot my password of user login. How to get in & change?

  Login user password

  I forgot my password of user login. How to get in & change?

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner

• 'Another user' login page to fix my computer F8

  I did restore the factory Dell Image several times in the past with no problems. Yesterday I restared my pc and hit F8, I'll repair my computer and I wait to display popups so I can do the factory Dell Image Restore, but need me to this ' another user ' login page and I type my username admin and it says the username cannot be connected.» I tried searching this problem on gooogle, but so far there is no solution. I have not all accounts running on this system. I'm running vista 32-bit. So my question is "How can I get past the other user login page" to get to the system recovery so I can restore my pc to factory conditions?

  Hello

  I suggest you to Dell Factory Image Restore by using Windows Vista installation DVD.

  Try the steps from the following link: http://en.community.dell.com/support-forums/laptop/w/laptop/how-to-perform-dell-factory-image-restore-using-windows-vista-setup-dvd.aspx

  Note: To restore the original factory image erases ALL existing data. This includes files, folders, programs, drivers, e-mails, photos. Before performing a PC Restore, back up all personal files. If you do not back up your personal files, data will be lost.

• after user, login and welcome screen, the screen is black no office

  after user login and welcome screen, the screen becomes no black no office, no error no display nothing. did the same thing in safe mode except with the border around the black screen safemode. System Restore didn't help, nor fact startup repair. the only thing I get is safe mode with command prompt and the system recovery options. Inspiron 1526 less then years.

  Hi Lilrockmike,

  Thanks for posting your question on the Forums of Windows Vista.

  Have you tried opening the the Task Manager on the screen by pressing CTRL + ALT + DEL?

  If you are able to open the Task Manager, please follow the steps in the data:

  1. click on the processes tab.

  2. scroll to the bottom and check if explorer.exe is listed under the name of the image.

  3. If explorer.exe is not in the list,

  (a) click file and then click New task (run).

  (b) type explorer.exe, and then click Ok.

  (c) check whether you have the back office.

  4. If explorer.exe is listed,

  (a) click on explorer.exe, and then click end process.

  (b) click file and then click New task (run).

  (c) type explorer.exe, and then click Ok.

  (d) check whether you have the back office.

  If the problem is solved, I recommend an antivirus on the computer analysis.

  I will recommend you to a virus on the computer scan using a good antivirus.

  You can also use Microsoft Live Onecare anti-virus.

  http://OneCare.live.com/site/en-us/default.htm

  Hope the above information helps. Please post back and we do know.

  Thank you & best regards

  Ashish Gupta
  Microsoft Answers Support Engineer

• Profile of user not loaded correctly, you have been connected with a temporary profile. How can I fix it?

  I use a Toshiba Satellite with windows vista. My father gave it to me, but instead of creating a new user account, I have renamed the original administrator account. two years later, I have 3 accounts on the laptop, which only the original is still the sole Director and has access to all partitions on the hard drive as well.

  A week ago, my computer laptop power had reported issues so I immediately sent for repair. I came home today and the Standard 2 user accounts work perfectly. However when I connect to my original administrator account I get this pop - up message:

  "The user profile was not loaded correctly. You have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Check the log of the events for more information or contact your administrator "

  I lost all my profile settings, including internet bookmarks, music playlists, etc. The office looks like a brand new installation of Vista and all the customization disappeared. I can't afford to lose all data. It is seriously important and was on my desk and in my documents.

  How can I get my profile without losing any data?

  Hi Salman91,

  Thank you for visiting the Microsoft Windows Vista Community.   New profile created, try browsing to the old profile (C:\users\username).  You should see all the old user data.  If this does not work, try to copy the files in Safe Mode.

  Please let us know if that helps.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft FixIt fails with the error 0x80004005 when run in the Standard user login

  Microsoft recommends running in a Standard user login.  However, the FixIt will not work in a Standard user login, even if started with "Run as Administrator".  It comes up with an empty window of FixIt if started without "Run as Administrator".  If started with 'Run as Administrator', it fails with the error: 0x80004005.  Don't miss this way 'by design', given that Microsoft must often State?

  Thank you

  el_abuelo

  Hello El_Abuelo,

  I went to the site you have included but the beta for Windows 7 users is full and I can't test what you are experiencing. They give you a site to give feedback on the beta product? If so, then please send a mail telling them of your question. If you already have a fix Center account, please log in to access your account on the site of difficulty It Center.

  If they don't give you a place for your comments, you can use the General Windows 7 comments page and don't forget to clarify that it is the Fix It center beta product for which you give your comments. Clickhere for a link to the forum Windows 7 comments.

  Thank you for making the point about your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• "User Login not allowed here"

  Here is my layout and the question.

  Page layout

  Using Dell Sonicwall NSA 2600 firewalls

  Two offices connected through the VPN tunnel.

  Office 1 Sonicwall LAN IP: 192.168.1.1

  Office 2 Soincwall LAN IP: 10.1.1.1

  Question:

  Created a local user account with full administrator access for the two sonicwalls. The local administrator account gets the following error message when you try to connect to the web interface to web Office FW of the subnet 2 interface 1 office.

  "User login has not allowed here"

  The default Administrator account is no problem connecting, but the secondary admin account I made to this question. Now, if I use a web browser on subnet 2 to the Office of a local computer secondary admin account has no problem connection on subnet 2 Office.

  Any ideas on that?

  Looks like you need to activate the user on the VPN connection. This is possible by configuring the VPN and going in the Advanced tab.

  Thank you

  Kevin Roberts

• How many user take RDP at the same time with different user login ID in Server R2 2012

  How many user take RDP at the same time with different user login ID in Server R2 2012?

  How many user take RDP at the same time with different user login ID in Server 2008 R2?

  How many user take RDP at the same time with different user login ID in Server 2012 starndard?

  How many user take RDP at the same time with different user login ID in Server 2008 standard?

  This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it