Profile of user doesn't have logon for the user administrator

Similar Questions

• XP hangs before logon for the user profile.

  Propely at startup of Windows, but XP hangs before logon for the user profile.

  The system does not start in all modes like without failure, command prompt mode, last know good Configuration. But it starts only in XP system recovery mode.

  What happened after cloning of a XP C: hard drive Sata Drive Dell OptiLex 760 to another System DELL OptiLlex 760 . I've used Norton Ghost 15.

  Hi ANM

  · Have you created an image of the system using Norton ghost backup software?

  When you create system images using backup software, it is supposed to ideally be used on the same computer, since you cloned it on another computer, it seems to me that the user profile is corrupted and failed to load.

  If the problem is the DELL OptiLex 760 system then I suggest you to connect with Norton Ghost.

  If not then you can follow the market from the link below: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My helmet fits on W7 but W7 doesn't have drivers for it. Help!

  My helmet fits on W7 but W7 doesn't have drivers for it. Help!

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  1. do you get an error message?
  2 are you able to successfully use the headset with the computer?

  Method 1
  I suggest you run the hardware and devices Troubleshooter and see if that helps.

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2
  I suggest you try the steps from the following link:

  Set up a Bluetooth compatible device (also valid for Win 7) device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  I also suggest you to contact the manufacturer of headphones and check if there are any compatible drivers for Windows 7.

• I can't access Microsoft Technet Forum: your account doesn't have access to the system of forums

  I can't access Microsoft Technet Forum, one day I got this message.

  The only thing that I did before this happened has been commented on in a few messages with my comment with my signature at the bottom.

  Now I get below error, it has been more than a week, someone please help.

  Your account doesn't have access to the forums system.

  Thanks in advance!

  Pankaj

  Hi John,

  Please click on the link mentioned to solve your problem by contacting TechNet below:

  Contact TechNet Customer Service:

  http://TechNet.Microsoft.com/en-us/subscriptions/bb856399.aspx

  I hope this helps.

• I used to have demand for the library and messenger live but its all parties.

  I used to have demand for the library and messenger live but its all parties.

  I tried to reinstall them like the way that several times, but they said that I already have when I don't have them. What should I do?

  Hello

  1. did you of recent changes on the computer?

  2 are you referring to Windows live essentials?

  I suggest that you uninstall the programs on the computer and try to reinstall the latest version, check if it works.

  How to remove and reinstall Windows Live Services

  http://support.Microsoft.com/kb/938275

  If the previous step fails, then you can post your request in the forums of Windows live.

  http://windowslivehelp.com/

• "Can not open AsIO.sys (2)" I get this message when I log in after a reboot. I have search for the file, but can't find it with the research or the command prompt. What do do in this file, and can be created and put into the appropriate folder?

  "Can not open AsIO.sys (2)" I get this message when I log in after a reboot.  I have search for the file, but can't find it with the research or the command prompt.  What do do in this file, and can be created and put into the appropriate folder?

  Hi Jack,

  This driver belongs to AsIO.sys Asus Probe. Try to uninstall Asus Probe and if you need, install again. If this does not help, uninstall Asus Probe and other tools of control such as Speedfan. Open the registry (regedit.exe) editor and search for AsIO.sys and remove all the entries that you can find.

  André
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• I installed Camera Raw on photoshop 11 9.1.1. When I try to open a file of a DMC-FZ200 Panisonic RW2, it tells me it doesn't have this format. the specification say it does. ???

  I installed Camera Raw on photoshop 11 9.1.1. When I try to open a file of a DMC-FZ200 Panisonic RW2, it tells me it doesn't have this format. the specification say it does. ???

  Photoshop CS4? = version 11 or 11 elements of Photoshop?

  Camera Raw 9.1.1 is only compatible with Photoshop CS6 and Cloud versions. It is not at all compatible with Photoshop Elements.

  Therefore, it is unlikely that you have installed Camera Raw 9.1.1.

  That said, the Panasonic DMC-FZ200 has been supported since Camera Raw 7.4.

  Devices supported by Camera Raw

  If you have Photoshop elements 11 - which ships with Camera Raw 7.1 - check what version of Camera Raw is actually installed. Help > updates

• Why is downloading an application after you have paid for the whole if difficult CC...?

  I paid for CC student for the year.  CC downloaded on my Mac, click on install for Photoshop and 30 odd hours later, several attempts, NOTHING.  So frustrating.  I get as much as 11 percent, then it breaks down, says it's the internet connection has been lost and the opportunity to try again.  I have now connected directly to my modem ethernet connection.  Half an hour later, it's 0 percent installed...  What the hell?  It shouldn't be complicated.  I paid for it and need it installed as soon as possible for assignments...  Help for someone who does not speak computer language would be great.  See you soon

  Please follow: why download an application after you have paid for the whole if difficult CC...?

  (Double Post)

• The user profile Service has no logon (for the 2nd time)

  I have Windows Vista, and this is the 2nd time in a few months this product. The first time that I could remedy this by following this tutorial.

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  But I can't do it twice, because I already have a folder with a .bk to the end and the other without the .bak. So I can't rename the files, so neither solutions work. And I can't do a system restore because it screws my McAfree upward. Please can someone help me?

  Hello

  The .bk is only a backup on the 1st operation comes off so you can listen to.
  You can also use .bz (or something else) instead of .bk to this effort. The important
  part is to save the old profile before you rename the .bak.

  BTW, there is a good chance that McAfee is the first cause, or at least getting worse, this question
  to verify the message options.

  ----------------------------------------------------------------------------------------------------------------

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• User account problems - create a new user profile with the error message: the user profile service service doesn't have the opening of session/user cannot load profile

  I'm very used to make new user accounts and he have done many times, but this is the first time I had trouble with it. I'm just trying to create another user on my computer, but every time I try to create an and log on to it, I get the message: the user profile service service has no opening session/user profile cannot be loaded. I tried to create this profile as a standard user, administrator, and a customer. Does anyone know what is the problem?

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• System Restore doesn't have access to the administrator account

  Hello

  Yesterday, I created a new username on my PC under Windows 8, but unfortunately I typed the wrong outlook address, so there is a user account on my system with an address from outlook that is not mine and I do not know the password.  To make things worse, I seem to have made my own local users represent a non-administrator, so the only administrator user account on the PC is that I can not enter and do not know the password.
  If I could somehow reset the system back to how it was before yesterday, everything would be fine, but I do not know how, because I don't have an administrator account.
  Any help is appreciated!  Thank you.

  Thanks for the help.  I just reinstalled Windows 8 in the end - I had everything backed up anyway, and it seemed like the easiest option.

• my wifi doesn't have access to the internet

  I have no problems before, but since I had the system ultimate internet phone I have more access to internet wifi. Any suggesstions.

  I called the company and spent several hours on the phone with them, I also have dumped story, disconnected from everything and plugged all back, no help.

  Hi MoWhite18,

  ·         What version of Windows is installed on your computer?

  ·         You receive an error message or error code?

  To fix your problem, try the following methods one by one.

   

  Method 1: Update the network driver.

  Steps to update of network driver:

  a. click the Start button.

  (b) in the search box, type devmgmt.msc , and then press enter.

  c. Select the peripheral network adapter and right click on it

  d. now, select Properties.

  e. in the Properties window, on the driver tab, click Update driver .

  f. after the installation of the updates, restart the computer.

  For more information, see the article mentioned below:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Method 2: Try resetting the TCP/IP stack.

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  If the same problem still persists, then try the next method.

  Method 3: Here you must troubleshoot using the resolution of network problems in Windows 7 and check for the issue to this follow the link provided below.

   

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Let us know if that helps.

• When I turn my laptop I have wait for the screen to come, or I have to wait for it to connect to the internet, what I do for this

  I have a computer gateway laptop and when I turn it on, I have to either wait for the screen to appear or for my laptop to connect to internet, I tried several different things, and none of them seem to work.before id turn on my laptop and within seconds it would connect, now it seems that it takes forever to connect. Thank you

  Hello

  1. any hardware or software changes made recently before the problem?

  I suggest that you follow all the steps in this article to resolve the problem.

  Optimize Windows Vista for better performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• My names of files in Flash CS6 change every time I have save for the first time

  When I got Flash CS6, I worked on an animation and has called "grumpy." Now, 2 years later, whenever I'm doing a project in Flash and save it for the first time, he adds "": grumpy ' at the end of the file name. "

  For example, I'm working on a project now with the point leader name "2_1.fla segment." When I recorded it for the first time, it changed to "segment 2_1.fla*: grump.»  Adds it at the end of any project, regardless of the type (ActionScript 3.0 or 2.0).

  I have no idea why Flash is doing this, because this project is not connected to the original 'grumpy' somehow. I don't know how to remove it, either. Any help would be appreciated! Thank you!!

  reset your preferences - flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  you could also disable AutoSave to see if that solved the problem.

• I just got the error message when you try to enter my I and Psalm I have paid for the monthly subscription for 3 months and still have not been able to use these software. they are already installed it just let me acess them?

  I just got the error meassage when you try to open both my I and PS I paid monthly payments for the composition and I have these two installed software. What can I do to work on it and why they give me this error message?

  Log, activation, or connection errors. CS5.5 and later versions

  Anything else, to be more precise. you have not provided information system nor told us, what really is the error message.

  Mylenium