Profile.VI of setpoint for the Triangle CDEx

Similar Questions

• "Engine of profiles is not available for the series in the worksheet selected" during the execution of a simulation

  When I run a simulation for a worksheet, it gives following message

  "Profiles of engine not available for the series in the selected worksheet. "To simulate the Please add relevant series of Simulation."

  http:// < Server: port >/engineManager/EngineManagerStarterServlet? Command = Status gave status as -1 (running). I started the server in simulation mode.

  Not sure that the question may be.

  Is there a log file where I can find more in detail. If so, what is the file name and where it is stored

  The error message indicates that the engine did not find a series in the worksheet to run the Simulation.

  Add the series of simulation and try again to call the simulation engine.

  Kind regards

  Shekhar

• You can create profiles that are timed for the Defy?

  .. .for instance, if I want my Defy to be quiet during the night, but then come back to ring the morning after a period of time? I can find no way to create patterns like this one - timed or not. Any help gratefully received.

  Check out an app called 'Sweet Dreams'

  Mark

  Support Forums Manager

• How can I add a correction lens profile in LR CC for the 15-30mm Tamron f2.8?

  does anyone know?  is this an update of Adobe, or can I add it manually?  I have the latest version

  Hello

  I think that you will have to create your own. See if this link helps: work with lenses in Adobe Photoshop, Lightroom and Camera Raw profiles

  Kind regards

  Steve

• What is the disadvantage of savings WITHOUT color profile for the web?

  I have discussed this issue in another thread and a clear argument against saving jpg files * without * a color profile must be performed.

  I'm very annoyed with how much more red and saturated, all my jpg files appear in IE (which does not read the sRGB embedded profile) compared to FF (which is the case).

  I tried to save the image even with the inclusion of unchecked color profile, and of course, IE and FF are showing the same image.

  It seems to me that including color profiles with jpg are just an invitation for different browsers interpret the image differently.

  Why not just save them all, WITHOUT color profiles?

  The downside to this, what exactly?

  mjyeager wrote:

  Emil, please do not confuse what follows for stubbornness...

  No worries, I never had such thoughts

  mjyeager wrote:

  ... IE does not read color profiles. The fact of FF. ERGO, in situations where a color profile is involved, the JPG will be different in each browser.

  True, without color managed programs and management the colors may not display an image in the same way. Except in the situation where the color profile describing the color of the image or the color values of an image without a color profile, by an extraordinary chance match the display capabilities of color of the device used by the program managed without colors.

  One of the problems that the addresses of color management is that all monitors will display the same color differently. Color management will make colors appear the same or as close as possible.

  A color managed program will send the RGB values of the color of the video card corrected to compensate for the differences between how your monitor displays color values and how they are perceived.

  For example, to help my Monitor wide gamut, when I create an image in Photoshop, with a red color pure R = 255, G = 0 and B = 0 and then do a screen capture, I can check how Photoshop sends these values to the video card. The result is R = 222, G = 65, B = 0 when I'm simulating an ideal sRGB display. So I can see how my colors appear on the screens of ideal sRGB. However, in reality, it is very likely to have a monitor displaying space sRGB color ideal without a color management, so to complete the color management chain, the other monitors that display my image must also have the appropriate color management to compensate for the differences in screen and display correctly RGB numbers representing the color that I see on my screen.

  mjyeager wrote:

  ... However, if the JPG has no color profile, image shows exactly the same way in both browsers...

  Who will most likely be a bad smell, which means not repoducing the expected color which is always the case with the browsers managed without colors.

  mjyeager wrote:

  ... Now, let's say this image - which looks the same in both browsers - is too hot. I can load it in Photoshop, change its hue and re-save is more what I'm looking for. The resulting image will then out - in the two browsers identically - the way I want to...

  Yes, the image will be the same in both browsers on your and any other monitor but the colors that you create (edit) will examine the way which only see you them on your monitor.

  mjyeager wrote:

  ... Now, what I think you are trying to do, is that I have no control on what are the conditions of viewing on the OTHER end (i.e., visitors to the site). They could range wide monitors, cheaper monitors, running MAC or PC, etc...

  I don't remember talking about this earlier, but yes, it's true.

  mjyeager wrote:

  ... It's true. I have no control over that. However, how including the color profile sRGB with the JPG would give me more control over these things I would not include? Unless you had to tell me that browsers arbitrarily apply a random color profile when in the absence of one, I am simply not understand how including the color with the JPG profile performs one another act that ensure that the picture is completely different in FF it does in Internet Explorer.

  You who are absolutely wrong. Color management is not to have any control over how other devices are setup, calibrated, etc.. As I said earlier make sure you communicate the colors scheduled correctly or as close as possible, as long as you and the destination use the proper color management. This means that the embedded profile FF will display correctly the planned colors while IE will not. If you do not include a color profile with your image both FF and IE will not display correctly the planned colors but they will be equal in that.

  mjyeager wrote:

  ... I understand the need for color profiles to print. In fact, my printer insists on the details when it comes to color profiles.

  But for the web? I'm still not understand where the downside is to omit the color profile. It's not like the browsers get CONFUSED when it is not included. Or that the colors will start randomly from refreshing one page to another.

  I am really trying to understand what you are saying here, but still haven't.

  In addition to what Marian said:

  If you create the colors using an sRGB display ideal (given the color management on your system works properly, it can be simulated by color of Photoshop on your range management widescreen when you assign the profile sRGB color to the image) and then on any ideal sRGB display, it will look the same you see on your screen regardless if it's with or without embedded sRGB color profile. However, in reality, it is unlikely to have a monitor, sRGB, display of the ideal space of sRGB color without color management. Now what does this mean in practice? Assume that users interested in, using the IE managed without colors on a PC with the Windows default color management. In other words, color management programs are told by the system monitor displays the ideal sRGB space, which is very likely to be the truth. Then users with this configuration with sRGB monitors will not see a difference between IE and FF when viewing your image with or without sRGB profile, the colors are not very likely to be the same that you see on the screen, but with the difference that is more likely to be accepted depending on how close to the ideal color space sRGB these monitors are. If some of these users with this configuration have wide range monitors, then the image will always be the same with or without sRGB profile, but with a very unacceptable difference of how you see it on your space to sRGB sumulated - strongly supersaturated.

  For users that have the color correctly managed systems, when the image is saved with a sRGB profile, it appears color managed programs such as FF the same or as close as possible to the way in which you can see on your monitor. Programs run without colors the case remains the same as that described above.

  A little history on how standard sRGB was created. It is a standard, including more things, but above all defining an abstract color space. It was created sometime after that the market was already flooded with computer monitors, and the creation of ideal sRGB color space was based on an average PC monitor display capabilities over time. After that the manufacturers used this standard sRGB as a target to create monitors.

  UN-color of programs run on PC have been created and tested using sRGB monitors so that they can't be considered reliable for showing intended to display colors if the images they use have been created using an sRGB they will be in the stadium of this range of sRGB.

• You are looking for the block CD build based on the time for MPC simulation.vi

  Hello everyone! I'm trying to implement MPC in LabVIEW. I downloaded some code that shows the implementation. My question is in these codes that I see a named block as CD build based on the time for MPC simulation.vi. I tried to find a lot of this block, but I could not... Can someone help me with the problem (exactly under what section I get this block) or can someone tell me how can I give the profile of setpoint for the problem of simulation MPC?

  The associated screws to generate the profile found in:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2011\vi.lib\addons\Control Design\_MPC\Reference profile

  or

  C:\Program NIUninstaller Instruments\LabVIEW 2011\\vi.lib\addons\Control Design\_MPC\Reference profile

  You can look at examples of:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2011\examples\Control and Simulation\Control Design\MPC

  C:\Program NIUninstaller Instruments\LabVIEW 2011\examples\Control and Simulation\Control Design\MPC

  to check the use of these screws

• How can I delete just my profile for the communities of Apple?

  Since my problem with mails ereased occurred again and I don't expect any solution or an explanation, not more, I just want my profile should be removed permanently from the community of apple. A failure to do so is against my will.

  I would also like to refer to the new European regulations on this issue, which should enter into force as of may 2018.

  REGULATION (EU) 2016/679 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL

  April 27, 2016

  on the protection of individuals with regard to the processing of data personal data and the free movement of such data and repealing Directive 95/46/EC (Data Protection general regulation)

  The normal approach might disable all the features which could lead you receive the e-mail activity in the areas you have followed, or no longer follow the subjects and communities. See this post for a description of how to do this. Leave the existing account for the next occasion when you want the help of the community.

  I see no personal data is connected to your account, and the terms and conditions cover the continued use of Apple of your question and the answers to what they could help others. I see that you have joined July 26 (you who could hide) and you did another thread outside of it. Your chosen username doesn't mean anything unless you have used in other environments (Google does not say). Your anonymity is secure. Nevertheless, I will mark this message to the attention of the guests and let them know of your request.

  TT2

• Is there a phone rep who can help me get my profile on my new computer? I think I did OK for the tutorial, but now it does not work

  I had to buy a new computer as my last one had problems. I backed up what I think is all of my files on an external hard drive and moved them to the new computer but Thunderbird does not open. So I re downloaded Thunderbird and followed the tutorial on copying and pasting the old profile in the profile folder and now Thunderbrid (I think) will not open.

  Thunderbird profile cannot be loaded. It may be missing or inaccessible.
  

  So I put everything in the trash and re downloaded the program, and I still get the same error (I however wouldn't be the case that I was starting from scratch).

  In a little over my head. Any help?

  Try this method to import emails.
  addon ImportExporttools:

  • https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

  Download the as file and save it to your ex: desktop

  In Thunderbird

  • Tools > Addons or Menu icon > Addons
  • Click the gear icon and select "install the addon from file".
  • Find the downloaded as file and click 'open '.
  • You may have to restart Thunderbird.

  To import an mbox file (all messages are stored in Thunderbird mbox files)
  Right click on the email account
  Select: ImportExporttools > import a mbox file
  Select: directly import one or more mbox files
  Search for the file and click 'open '.

• How can I restore my old profile data for the reinstalled firefox

  had a problem with the opening of firefox and he suggested that I install a new version, I did and I have an "old data firefox" file. My question is how can I reinstall the old file and all the stuff that's about it.

  A 'Old Firefox Data' folder on the desktop is created when you reset Firefox.

  You should be able to copy the data selected from this folder to the current Firefox profile folder.

  For bookmarks that you would need to file places.sqlite or possibly restore bookmarks from a JSON backup in the folder bookmarkbackups.

  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  See also:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• How to set up certificates for the default user profile

  I'm trying to create a package to install Firefox in our corporate environment that contains our locally-issued certificates. We can manually import the certs, but since Firefox is part of our brand, I would like to have the certificates already installed for users they open FF for the first time.

  I wrote a script that installs Firefox 22, copy custom files in the correct location files, creates a new profile folder (C:\Program Files (x 86) \Mozilla Firefox\defaults\profile) and copy the file cert8.db in that newly created file. However, when a user opens FF for the first time, none of our certificates are installed. If I close FF, copy the file cert8.db even in the .default file C:\Users\ < username > \AppData\Roaming\Mozilla\Firefox\Profiles\ < random string > and then reopen FF, CERT now show as installed upward.

  How can I automate this so that each user who opens FF will have implemented CERT?

  This is for the initial installation of Firefox.
  22 of Firefox, version 22.0.0.4917
  Windows 7, 64-bit

  Hello keslaa, since firefox 21 & upward this information would need to go to % ProgramFiles(x86) %\Mozilla Firefox\browser\defaults\profile in order to take effect.

  http://Mike.kaply.com/2013/05/13/more-major-changes-coming-in-Firefox-21/

• Satellite P200 - 14 H: I'm looking for the ICC profile

  Hello!

  I'm looking for the profile for my Toshiba P200 - 14 H. It is very important for me.
  Thanks for any help.
  Concerning

  ICC profile? I really don't think that you will find on the Toshiba support page.
  Are you sure that this profile should be part of the Toshiba P200 support s?

  Good bye

• Set up a user profile specifically for the game

  Hi all

  I installed Windows 7 (64-bit) and use it mainly for work (Excel, SPSS, Word). I also have many programs start automatically with Windows and run as background processes. What I want to do is create a profile user who loads only minimum programs and services required to play video games. Currently I have to manually complete the applications and services, which is a pain in the thigh. How can I configure a user profile specifically for games?

  TYIA,

  Mark

  Hi Mark,

  You can create a new user profile, but you will need to put your computer in a clean boot for the new user account only State to play games and to disable applications/services that are not used frequently.

  New user account will inherit all startup applications and services of the administrator account.

  To create a user account , follow the steps in the link
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  To put your computer in a clean boot State, follow the steps in the article.
  http://support.Microsoft.com/kb/929135

  Aziz Nadeem - Microsoft Support

• What is the right place for the system profile folder in windows xp?

  would it be in system32? .

  Windows profile located in Documents and Settings and look for the user name you want.

• How can I create two Windows XP ins journal for the same profile account

  How to create two window XP account but after I'm in the same document and connection setting? can anyone help? I am urgently use...

  for example

  I create UserB, wear and two user account
  the nest of access profile is userA
  what I need is UserA, connect you will see UserA profile, including all the settings such as the office and the document.
  When UserB connect it will also see the same thing as UserA is the profile of UserA. Can I know how to do? I know it's something on the registry.
  Here's a link, but I really understand now
  http://support.Microsoft.com/kb/314045
  Thanks in advance

  You cannot use them with the same profile, but you can copy the user profile to B.

  See here for more help: to copy a user profile

  You must be logged in as an administrator to do and you can't copy to or from the account to which you are connected.  If you want to copy the profile to the profile B, you need to be connected on that C and C must be a member of the Administrators group, you will have to create this account C if it is not already available (or use the built-in Administrator account).

  John

• 'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  Original title: the user environment

  After starting windows, on the Welcome screen, this message always comes.
  "User environment.
  Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.
  And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

  Thanks... :)

  This is typical of a corrupted profile.  To recover, perform the following steps:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Almost always, corrupt profiles are accompanied by damaged drive.  During recovery, run a disk check with the /r or /f on your computer option.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW