profiles and framework files

Similar Questions

• Auto Deploy, host profile and answer files

  Hello

  I'm busy trying to learn a little more about Auto deploy. I'm trying to figure out what is the best practice when it comes to the part host profiles of the automatic process of deploy. The way I see there are two ways to use host profiles.

  (1) for each host, I create a separate host profile and create necessary deployment rules, one rule per host.

  (2) I create a host profile and only one rule of deployment and then use the response file option to create the unique settings of the host.

  I've set up two option, option 2 seems less reliable while option 1 works every time. So my main question is what is the recommended method to use profiles to host with Auto deploy.

  Thank you

  Hello

  It is usually done through your supplied option 2.

  Create a profile from a host of reference and apply this profile to a host or a cluster.  Usually a cluster or however you define your deployment rules.  Update of the personalization of the host, then remove it from maintenance mode.

  Documentation on the profiles of the host.

  Here a documentation to Auto deploy

  I am a big fan or Pluralsight and Nash did a great job in this series.

  Training, Pluralsight

  Course: VMware vSphere Optimize & scale series

  Part 3: Monitoring & Automation

  Section: Self help to deploy for the deployment of ESXi

  So, that is the 'best practice' or ' recommended?  Good question.  Which is usually answered by - what is best for you!

  I hope this helps a little.

• The profile and desktop files disappeared after uninstalling the HP Deskjet software

  I uninstalled the HP Deskjet F4500-series software, and now my files and folders disappeared. The only thing showing on my desk is in the trash. Something horrible just happened? If so, how is that possible?

  I uninstalled the HP Deskjet F4500-series software, and now my files and folders disappeared. The only thing showing on my desk is in the trash. Something horrible just happened? If so, how is that possible?

  Hey Reba Jo

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do the restore of the system in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Walter, the time zone traveller

• Strange problem with framework files

  So I don't know and framework files seems to be one thing on here lately, but it's a little weird.  A user that we can see the items that are in the workflow in the context of records.  What is strange is consistent with the documentation (unless I misread it) if it is in the workflow users should not be able to see the point at all, unless they go to pages on workflow.  Is there something that I am missing on this subject because this is a really strange thing happening.

  Hello

  You can change the display of the published folders mode, so that only the items that are released are displayed.

  Work with folders of content - 11 g Release 1 (11.1.1)

  12.1.2.8 content item Versioning

  Thank you

  Srinath

• All IT gurus out there who know Firefox... have lost the passwords saved when FF created a new profile and delete old files key3.dbf and logins.json profile.

  All IT gurus out there who know Firefox... have lost the passwords saved when FF created a new profile and delete old files key3.dbf and logins.json profile. Any ideas, anyone?

  So it's not a logins.json file?

  I see a signons3.txt file and a file signons.sqlite older, if you can try to see if you can import passwords stored in this file.

  You can force Firefox to re-import the passwords in the file signons.sqlite and regenerate the file logins.json with the following steps:

  • reset the signon.importedFromSqlite pref on the topic: config page by default via the context menu
  • Delete the logins.json file in the closed Firefox with Firefox profile folder

  When you restart Firefox, then you should have the pref signon.importedFromSqlite with the value set to true.
  You have passwords that are imported in the password manager, unless there were errors or signons.sqlite signons3.txt.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Missing profile and I can't reopen firefox after the cancellation of a refreshment. Also tried to delete all the files of previous firefox. How to re open?

  After the cancellation of a refresh I get lack of profile and cannot reopen firefox. I also deleted all files in firefox and I use a mac. How to re open firefox

  In the Terminal, run this
  /Applications/Firefox.app/Contents/MacOS/Firefox-bin Pei

  More information here:
  https://support.Mozilla.org/en-us/KB/Profile-Manager-create-and-remove-Firefox-profiles#Firefox:Mac:FX40

  Do not remove the profile you have broken by stopping the update process. You may be able to recover some data from the old profile.
  https://support.Mozilla.org/en-us/KB/recovering-important-data-from-an-old-profile

• How read the Archive.msf and .sbd files stored on the backup media without restoring the current profile?

  I have stored vast e-mail Archives of files on backup media to free hard drive memory. How to read Archive.sbd and Archive.msf selected files without restoring them to the current profile? Can I create a new profile and restore it temporarily?

  Tbirds mail-container has a pair of files

  (1) - name of the container (with no extension) here are all the emails one after the other.
  (2) container - name.msf one type of index, if deleted itwill be restored

  If there is any subcontainers, there is also a container - name.sbd which is a directory (map)
  In this directory there are new pairs or even directories.

  Files without extension is the mbox files. As they exist even when there is simply a directory .sbd and not emails, you need only point to this mbox (empty) file to load the tree entire (folder - map-) use the ImportExportTools add-on.

• I created a new profile and copied the files from my old computer inside firefox. How do the new profile, just delete the old one?

  I am running windows 7, I had to recover my files on an external hard drive when my old computer crashed. I created a new profile as described in the Web site of firefox and copied all the files into it. I just need to know how to use the new profile when I open firefox, just delete the old profile? Or do I have to reinstall firefox.

  If you no longer have need or intention to use this older profile, then you can use the Profile Manager to delete this profile and delete the files.

  • http://KB.mozillazine.org/Profile_Manager
  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
  • http://KB.mozillazine.org/Profile_backup

• my computer is the connection with a temporary profile and I can't access some files how to fix this?

  my computer is the signature with a temporary profile and I can't access any of my files how to fix this?

  Hello

  Please post in the forums for your version of Windows.

  Ask a question in a select Technical Forum here appropriate injector:

  Microsoft Community - Forums
  http://answers.Microsoft.com/en-us

  Please provide all the information we need to help us help you.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  =================================

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
  Safe Mode account has no default password (so unless someone changed
  the password should be available).

  Some programs such as the Google Updater (if you've added the Google toolbar,
  Chrome or Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7
  computer by using a temporary profile: "the user profile Service has no logon.
  Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "the user profile Service has no logon. Could not load user profile. "in
  Vista & Windows 7.
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  ----------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 - free methods system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ----------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ---------------------------------------------------------------------------------------------------------

  If you can't access your old account you can still use an Admin to migrate to one
  new (remember to always leave an account Admin who is not used except)
  to test and difficulty).

  Difficulty to a Vista - corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Difficulty to a corrupt user - Windows 7 profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Could not load the profile user (XP OS) and lost files

  Hello

  I tried to connect to my help my profile on XP last night and message box came up saying that my profile cannot be loaded.  I am currently in the temporary profile that was created automatically by the system for this profile.  It seems that files on another profile missing now and I can't get back my original profile.  This profile has been my administrator profile that I created to replace the supplied profile admin system.

  I checked the event log and I see an error event ID: 7026 "could not load the driver system or next start: Lbd." recently, I used the 'delete' function to get rid of one or two programs but was able to connect after you remove these two programs, so I don't think that was my problem with profile.

  I've seen a few comments on the forums, but they are especially for non XP OS.  Is it possible to retrieve the profile and files.

  Please notify.

  Thank you for your time.

  Recovering from a corrupted or damaged user profile is a relatively simple operation.  Follow the instructions in the following article:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW

• Mac Mavericks. Camera raw 9.1. Camera Nikon D810. How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply also in the pictures showe

  Oops... did not write the question where I... How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply too in images showed in the bridge? I'm a newbie in the forums and I'm not sure how to proceed.

  You can right click and copy the settings on an image that has the right profile. Then highlight all the images that you want to edit, right click and paste the settings. On the list that is displayed, simply choose the camera calibration.

• How to repair files with broken JPEG ICC profiles (and perhaps other questions)

  I have a set of valuable digital images, they are actually fairly low resolution scans of the prints, but they are invaluable and cannot be re-analysis.

  The images show the following questions and I don't know how to fix:

  (1) in the dialog box import LR, they appear as "Preview not available for this file.

  (2) when I try to import into LR, I get the error "the following files were not imported because they could not be read.

  (3) if I open the file in Photoshop CS5, I get the warning "the embedded ICC profile cannot be used because the embedded ICC profile is not valid. Ignoring the profile' - if I ignore it, PS can open the file but of course, the color profile is missing and the images seem to universally terrible.

  Curiously, however, the images provide an overview in Windows Explorer and if I open them with the infinitely lower Windows Live Photo Gallery, they correctly opens and the colors are properly.

  Which leads me to believe that there is something wrong with these files that Windows is OK with but Adobe is not. Because I don't have the paper prints, cannot perform a new analysis and do not know the workflow of the process not applied, I have absolutely no idea if this happened in time scanning or subsequently.

  HOWEVER, at this time, it surely must be a tool that allows me to package the information Windows can read and put it back in the file where it should be so that Adobe can read the same thing?

  No idea how?

  Thank you in advance,

  Alastair

  Alastair,

  The application of windows Viewer ignores all profiles and treats all files as if they were sRGB.

  Probably you have your Photoshop preferences defaults to a space of a different color than that, so the colors look bad. Try to make default PS in sRGB and open one of these images. If it looks good, you can embed a profile inside sRGB and save it under a new name. If this isn't the case, report and someone should be able to help.

  HAL

• Can I import an old profile and prevent deletion of old emails that no longer exist on the server?

  I removed all the emails from the server and archivated them locally. A few days later, I reinstalled my windows, but I forgot to save the profile Thunderbird.

  I have an old backup, but whenever I try to use it, it doesn't (of course) delete all emails that do not exist on the server. Is it possible to avoid this automated sync or remove before opening the profile?

  Looks like you are using an Imap account.
  If you just try to save emails residing in mbox files (mbox files don't have any extension)

  Make sure Thunderbird is closed before doing anything in the profile folder.
  If you are familiar with the profile folder, you can copy paste the mbox files (without extension) in the account of 'Local folders' which is located in the folder "mail".
  and then restart Thunderbird. the indexing file (.msf) will automatically be created.

  OR
  Try to import them using a tool in "local folders".
  ImportExportTool addon:

  • https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

  How to install the addon:
  Download file as addon for desktop or downloads folder.

  In Thunderbird
  Tools > icon menu or modules > Modules

  • Click the gear icon and select "install the addon from file".
  • Find the downloaded as file and click 'open '.
  • You have to restart Thunderbird.

  Make a right click on the "Local Folders" folder or another folder in "Local folders"
  Choose "ImportExporttools" > "file Mbox import.
  Select "Import directly one or more mbox files" and click OK

  Find the folder of mbox files backup profile
  Select mbox files, and then click 'open '.
  It has to import the folder containing emails.

• Smart folders do not show sent ymail and project files.

  I have subscribed to all folders YMAIL and all smart folders to select the appropriate imap folder. Most of the names do not match the names listed when I connect directly, but some work anyway (watch in TBird but shipments it is unwanted online and it works). The sent folder YMAIL doesn't show anywhere, YMAIL folder project displayed YMAIL instead of the unified drafts folder. GMAIL and Outlook work very well.
  Reminder: YMAIL shows under Inbox, junk mail and Trash but not covered by air currents and sent.
  Any suggestions?

  Thanks Matt.
  No fine Crusaders. I deleted the physical file using Windows Explorer. I searched and he did it before I did anything else. Then I tried a lot of things myself. Then I posted my request for help.

  I'm reasonably sure there is something wrong with the way that Thunderbird creates the MSF smart folder or IMAP.yahoo MSF file. He also had something to do with my account settings. I got it all working by changing to keep everything on my PC to keep it on the servers.

  IN CASE YOU ARE WORRIED, I ATTACHED A PICTURE OF MY SETTINGS THAT WORK AND HAVE A LITTLE RECAP OF ALL THAT BELOW.

  Problem:
  1. sent YMAIL of folder appears in the view 'All' but does not anywhere in the "smart folder. BUT even if it is not anywhere, e-mails that appear when I click on the unified "Sent" folder
  2 project YMAIL folder appears in the mode "All", but "Smart Folder" mode it sometimes shows under YMAIL, and sometimes in the smart folder.

  Unique configuration:
  1. I have two profiles and choose which use when I start T-Bird.
  2. or the profile is in the standard location. Profile with all the 3 services is located on a memory stick, so I can use it on any PC.

  Account settings: all three (GMAIL, Outlook and YMAIL) are set to the same thing.
  1 server: check to send to startup & all 60 minutes. Move deleted messages to the trash on YMAIL & GMAIL. Move to deleted in Outlook. All have empty the trash at the exit.
  2. the copies & folders: put a copy in sent premises. Keep the archives of message is not checked. Keep on local drafts drafts. Models of light up on models the.
  3 junk Settings: place new unwanted mailings on YMAIL, Spam on GMAIL, spam on Outlook and undesirable on local issues.
  4 synchronization: Kepp messages on this computer is not checked. Synchronize all messages regardless of age. Do not delete the messages.
  5. Advanced Synchronization: all records are unchecked in "choose for offline use."
  Junk is the only one where the T-Bird is set to put/keep e-mail on the server.

  Server properties: all records are verified to be included in global research.
  Folder subscription server status:
  1 YMAIL: Project, reception, sending mass mailings, Trash box
  2 GMAIL: Drafts, Inbox, sent Mail, Spam, Trash, all mail.
  3. Outlook: drafts, Inbox, sent, Junk, deleted.
  Online search is verified for all unified servers. And all of these answers are archived in the unified corresponding folder "choose" settings. Local folders are also checked.

  Attempted fixes:
  1 checked subscription & unified folder "choose folders". All have been verified.
  2 tried several sequense of checking and unchecking subscription and choose the folders. None worked.
  3 search help and used Windows Explorer to remove the smart folder. Restarted two times T-Bird. Sometimes it only part of his corrections on the first reboot. No change.
  4 backed up and deleted the YMAIL Sent.msf folder. T - Bird re-created before lower, but fixed no problem.
  5. save the entire profile and tried to edit the smart folder Sent.msf. No luck.
  6 restore full profile. Tried editing IMAP YMAIL Sent.msf. No luck.
  7 Retored profile and asked for help.
  8. kept trying and finally got all work to keep everything on the servers instead of my PC.

• Try to restore a lost Thunderbird profile, but can't "move profile" because the file names are too long

  I'm having a problem with Thunderbird that is addressed in several comments here and on "mozillaZine", but trying to follow the instructions for fixing it, I ran into a new problem that I see not addressed. The initial problem is that described in this thread, where my files and everything just disappeared, and I am invited to start to create a new profile:

  https://support.Mozilla.org/en-us/questions/1040003

  Following the links in this thread, I get to this - and since my address book has also apparently gone, I click the internal link to the section titled 'Lost profile':

  http://KB.mozillazine.org/Recovering_a_profile_that_suddenly_disappeared

  Step 1 then sent me here:

  http://KB.mozillazine.org/Moving_your_profile_folder_-_Thunderbird

  Step 2 on this page says: "Copy the profile folder where you want to store." When I try to do it, however (using Windows Explorer on Windows 7), he gets to halfway through the copy and then hang up because it clashes with a file name that is too long to copy. And according to the prompt that tells me this, there are many more yet to come long file names.

  Ignore this error and I just ignore these files? That means the copy of profile won't be complete, which I think would be dangerous or would just cause other errors. Or is there some simpler way quite do what I originally planned to do, which is to recover the profile which has mysteriously disappeared?

  Again, I'm under Thunderbird on Windows 7 and it was used for years without ever encountering this extremely irritating glitch. I'll be grateful for any help.

  Here are three different approaches, I suggest:

  1 see https://support.mozilla.org/en-US/kb/using-multiple-profiles and see if you can switch to that you want to use the Profile Manager.

  2. While TB is NOT running, use a prompt with the following commands: Note: place the entire path in quotation marks.

  • CD "the full path of your current profile directory name '.
  • xcopy "the full path of your"good"profile name" / s/h
  • now check with the Windows Explorer, and switch to him as above

  3 change "profiles.ini" (using a text editor such as Notepad) to point to the profile 'good '. "profiles.ini" looks like this:

  [General]
  StartWithLastProfile = 1

  [Profile0]
  Name = default
  IsRelative = 1 * change this to 0 *.
  Path = yt20rg5n.default * change this to the path and the name of your profile of "good."
  Default = 1

  Let me know how it turns out.