Cannot install utilities chipset on Portege R500-11Z

Similar Questions

• Portege R500-11Z: how to use the external mic and hear the internal speakers

  We have a Portege R500-11Z running XP and want to use Skype with an external table microphone and the internal speakers.

  When connect us the microphone to the Jack MIC the Portege, built-in speakers cut out!

  How to use an external mic and still hear the internal speakers?

  Hello

  > When connect us the microphone on the Portege, built-in speaker MIC Jack cut!
  Are you sure you used the microphone port and no headphone port?

  Have you checked your settings Audio from Skype?
  There is an option called ring through the speaker too or something like that.

  Please also check the Realtek HD audio Manager in Control Panel.
  There is a tab called Audio i/o.

  Usually, you can change the connector settings, by clicking on the small key-tool icon.
  Disable the option called Mute rear output when plugged headphones before

  As you can see is called headset and not so I m confused a little bit why the speakers are turned off when you connect an external microphone.

  By the way; There is also a tab called micro.
  Check if the two options that reduce the echo and noise are OFF

• Portege R500-11Z: recovery disk to help prepare a new HARD drive

  I bought a new hard drive (SSD) for my R500-11Z and I put in an envelope with the USB cable before installation - I want to be able to format the drive and create a new copy of Windows XP before you get out of my existing hard drive.

  I'm looking for ways to use the recovery disk and it SEEMS that it should be possible... EXCEPT...

  I discovered that on the recovery disk there is an executable called recoUNPACK in the Tools folder, which should, in theory, restore the contents of the disc to the hard drive. However, because the new hard drive is plugged into my existing XP set up, he gets a folder called System Volume Information written in it. The presence of this file causes the recoUNPACK to fail. He gets, at 59%, every time, and then survey the error - System Volume Information already exists.

  Any person proposing the deletion of the folder should consider their knowledge of the XP - there is no way to do this, ask Mr. Google if you don't believe me. I also tried this with full of this folder write permissions so that, in theory, could replace recoUNPACK...

  I would be very grateful if someone knows a way of "forcing" crush the System Volume information folder or another way to 'restore' the recovery of my new hard drive disk (other that disassemble the laptop and substitute physically the disc!).

  I have reviewed various options for establishing a USB bootable drive, but as I will adapt it in my laptop I don't want running all versions of XP - so using the recovery disc supplied with my odd R500. All bootable USB I can find only programs, fat32 format, and I would stay in NTFS...

  And the reason why I want to do it this way, it is that I want to continue to use my existing hard drive until the news is ready - its supposed to be an effective way to work... but so far the time wasted, trying to restore the disks could have been better spent undoing the screws on the rear of the machine!

  Thanks in advance

  > However, because the new hard drive is plugged into my existing XP set up, he gets a folder called System Volume Information written in it. The presence of this file causes the recoUNPACK to fail. He gets, at 59%, every time and then lift the error - System Volume Information already exists

  Hmm the right path and the letter of the partition or volume entitled did you use?

  As far as I know that the command should show something like this:

  + recounpack.exe d:\imagename.tpa z: f +.

  (z: is the letter of your external USB drive and may be different in your case)

• Cannot install Vista Business on Portege M400 - IDE issues

  Hi guys... I am looking for your help.

  I downloaded all the new Vista drivers avaiable from Toshiba in support of the new installation of Vista business on my old Portege M400, that came preloaded with a version of XP Tablet and kept their loan on a CD.

  I also upgraded the version of the ACPI BIOS to the latest available 3.80.

  I insert the first CD of Vista professional and do a boot. (I also have a n upgrade Vista Business CD but I want to do a clean install).
  I go past the first steps and choose Install.
  I am faced with an error message "no disk has been found. "Click on load a driver to provide a device for installing mass storage.

  Looks like Vista is not able to see the IDE drive to the edge and it's a driver problem.

  I touched the "Rescan" button available on the windows installation and another message appears: "no device drivers were found. Make sure that the installation media contains the correct driver, and then click OK. »

  Currently loaded on the XP: currently loaded poster IDE ATA/ATAPI controllers like Device Manager: "Intel (R) 82801 G (ICH7 Family) Ultra ATA Storage Controllers and primary IDE channel."

  Hard drives shown are: Toshiba RAID SCSI Disk Device LD0

  Pls tell, what new drivers since available downloads of drivers Vista for my model 400 ML PPM40E, should I choose here for my Vista installation recognizes the disk available?

  Hello

  It is very easy to solve this problem.
  If you would look on the page of the European driver Toshiba (Portege M400 section), then you will notice that a RAID driver is available for this model of laptop.

  Impossible to install Vista because it cannot find the HARD drive due to lack of RAID driver!

  You must install the RAID driver first and then you can proceed with the installation of Vista.
  As far as I know the Vista installation accepting the USB flash key you can use this key to include the RAID driver.

  Hope I could give some useful advice.

  Cheers mate

• Install Windows 8 on Portege R500

  Hello

  Is it possible to install Windows 8 on a Portégé R500? I've tried and failed. I think that the reason is that Windows 8 not use a GPT and MBR disk.

  Y at - it an update of the BIOS to treat the GPT disks?

  Thank you
  Markus

  As much as I know this old Portege is not supported for Win8 and Toshiba didn't offer not any what Win8 driver tool or utility, especially not a BIOS version that is designed to help with the installation of Win8.

• Cannot install Windows XP on Portege S100 series

  Hello!!
  Help, please!
  I have a Toshiba portege S100, I think that since 2005.
  I try for a few weeks to install a windows xp.
  This thing has become impossible for me. I tried hundreds of xp, but never work. He can't see the drive hard because I assume that the sata driver.
  Please, can someone tell me where I can find a workly raid driver.
  Thank you!

  Hi mircea,.

  It s not the driver SATA who is absent, but the RAID driver. OK it similar but just to be clear ;) s

  You can download the RAID driver from Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  But to look for in * Archive * rather portable computer product category because it of older model so it s moved to Archive.

  Check this box!

• Cannot install utilities on Satellite L670D-103 with Win7 32-bit Toshiba

  Hello

  I have a problem with my brand new Satellite L670D-103. To install my design software (AutoCAD_32bit), I had to install a 32 bit OS. So, now, I'm running under Windows7 32 bit and my CAD software works great, perfect. The problem is that I can't find any TOSHIBA (utilities or added value or HotKey) software that runs on Windows7 32 bit for my type of computer. If the shortcut keys do not work and my WIFI is turned off! (I need to use the Fn + F8 keyboard shortcut to turn on!)

  I tried to install the other version of "Toshiba Value added package" of another type of computer SATELLITE but it never works...

  Someone has an idea? is there anyone from Toshiba support help me?

  Thank you
  Olivier

  Thanks for the feedback second

• Satellite A30-151 PSA33E - cannot install the chipset driver

  Hello

  I have Toshiba Satellite A30-151 PSA33E-72KX3-EN.
  I recently Reinstalled Windows XP.

  The chipset driver that I downloaded from the web site, does not work.
  file: http://support1.toshiba-tro.de/tedd-files2/0/csutil-20080320162841.zip

  The message is: Intel... requires a platform chipset soustenans running on a supported operating system.

  What should do?

  Hello

  The message appears because;
  (1) the chipset driver is not compatible with the chipset
  (2) or the chipset driver is not compatible with the operating system

  It seems that this point 1) is correct.
  As much as I know Satellite A30-151 PSA33E-72KX3-EN supports the ATI graphics chip. Right?
  My knowledge this old model of laptop Satellite A30 escaped with graphics chip ATI or Intel graphics chip.
  Maybe the chipset driver is only compatible with laptops with an Intel GPU.

  However, you can install a diagnostic tool for material like Everest Home Edition.
  This will show you the chipset of s for laptop and you can download the Intel chipset driver from the Intel page.

  PS: Make sure that Win XP is up to date!

• Satellite Pro A200 - 1NB PSAE7E cannot install the chipset driver

  I decided to install windows XP last night and for this I slipstreamed SP3 and all the drivers that I could find on the Toshiba support site in my installation CD with nLite. Installation went well, but the problem appeared when I tried to install the driver of the Intel chipset that is a .exe file.

  What I get is an installer that gets stuck in the middle (port 5 PC ich8 something)... after that, I have to hold the power button to get off the computer in power.

  I've updated the BIOS, but it doesn't change anything...

  Thanks in advance for any help you can provide,

  SainT

  Great! Thanks for this info! It might be useful to others!

• Re: Satellite L350 - cannot install Intel Chipset Software utility

  I got my Satellite L350 for about 3 months now and gave Vista my best shot and he still hates.
  I'm trying to go back to XP (care warranty issues). My problem is the following: -.

  Windows XP installs OK but trying to install the Intel(r) Chipset Software Installation Utility ' "INFINST_AUTOL.". " EXE', I get the following message.

  + "This application has failed to start because the application is incorrect. Reinstalling the application may fix this problem ' + '.

  Strange message as this is a first time installation I'm doing. I have re-uploaded the file twice in case it was corrupted.

  Without these .inf files in place, several pieces of material wont recognized under XP.

  Someone at - it an idea of what's going on?

  TIA

  Hello

  What L350-xxx you have exactly?
  Have you downloaded this page of the European driver Toshiba Intel chipset utility?

  Feedback would be appreciated!

• Portege R500: How to activate the modem umts / 3g under Kubuntu 8.04? (Fn + f8)

  Hello

  I just installed kubuntu x86_64 on portege R500, but I can't turn on the modem umts / 3g.

  On Windows, I use Fn + F8 to activate it. When I use the key combination a new light begins to Flash next to the Ref. Leucht wireless meaming 3 g/umts is turned on but I can´t do on Linux.

  I have can´t activate so lspci even can not find the umts modem.

  I tried an option in the bios saying "Device Config: all devices / Setup by OS" (I tried the first option all devices), but I can't yet find the Linux umts modem.

  I also downloaded the utility toshet [http://www.schwieters.org/toshset/] but didn t find any option related to 3 g/umts modems.

  Any idea on how to activate it?

  Thanks in advance.

  FN key features are controlled by the tool designed by Toshiba. Toshiba doesn't support Linux for now and as a result there is no Linux tool to achieve this.

• Portege R500: Cannot restore Vista using Toshiba recovery disks

  I downgraded Vista to XP loaded factory.
  However, I would now like to restore back to Vista.

  I have disc 1 & 2 ' product Recovery DVD-Rom; Portege R500 disks.
  They are also marked "Windows Vista Business (SSD/PATA)" has been provided by Toshiba.

  I don't know how to use these discs to restore my operating system to Windows Vista. When I insert disc 1 and after loading some files, a message "cannot read the file source or disk - Preinst2.SWM" and I can not go any further.

  An instruction step by step would be greatly appreciated

  I wonder why you receive two recovery disks. As far as I know Toshiba Vista Recovery image is stored on a DVD.
  Perhaps you have received two CD

  In any case, have you tried to boot from the second disk? I mean the second recovery CD?

  Usually, recovery is not very sensitive. You must boot from the disc and should follow the instructions on the screen.

  The error cannot read from the source file or disk - Preinst2.SWM looks like a little to the Conference on disarmament would not readable or the CD/DVD drive would not read the disc properly.

• What is the difference between Portege R500-121 and R500-11z

  Hello

  What difference is between model Portege R500-121 3 G and R500-11z?

  Thank you

  The two supports of laptops:

  PROCESSOR - INTEL CORE 2 DUO U7700 (1.33 GHZ) PROCESSOR
  GPU - INTEL 945GMS
  DISK HARD - 160 GB (5400 RPM) SATA
  FINGERPRINTSENSOR
  11 a/G/N INTEL wireless network card

  And the only difference is that R500-11Z does not support the * module * 3 g!

• Re: Portege R500-11 with SSD: I want to install Win XP

  Sorry if this is a common question, but I haven't had no luck with the research.

  I have a Portege R500-11 pair with SSD and I want their downgrade to XP. (speed issues)

  First question. Is it possible or are there problems?

  Second: I guess I have to install the SSD driver, with nlite or F6 during installation of the victory, but which is the correct driver? Can someone give me the exact link, please?

  Is this? Intel Storage Manager.

  Thanks for your help and sorry again if it is a question of RTFM.
  Good bye

  Chris

  I found it!

  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

• Portege R500 - blue screen after installing Windows XP SP3 home edition

  * computer toshiba Portege R500 laptop *.

  * non-modele ppr50e00j00fs4 *.

  SP3 installed via update-site, received successful message SP3 installed restart... now bluescreen an impossibility to restart! Not even in save mode!

  If I try to start with the InstallationRecommandations, I get the following message:

  STOP: 0X0000007E (0XC0000005, 0XF79ED8EB, 0XF79ED7F4, 0XF79ED4F0)

  Can someone help me please?

  Hmmm. seems that this is a known Microsoft issue because I found these MS knwoldge base article:

  How to troubleshoot a Stop error 0x0000007E in Windows XP
  http://support.Microsoft.com/kb/330182/en-us/

  Microsoft has stated that:

  + These problems may occur if a system thread generates the error handler catches not an exception. You receive this error message if one or more of the following conditions are met: +.

  + If this issue occurs after the first restart during Windows Setup, or when the Setup program is finished, the computer does not have a sufficient disk space to run Windows. +
  + If this problem occurs after the first restart during the installation of Windows, or once the installation is complete, the computer's BIOS may be incompatible with Windows. +
  + Incompatible video card drivers. +
  + A chauffeur service or system device damaged. +
  + If the problem is associated with the Win32k.sys file, it can be caused by a control program remote third +.

  I recommend checking the solution proposals published on the website of Ms.

  Good bye