Profiles of papers Gallery not available in the printer settings dialog box

Similar Questions

• "communication not available with the printer" message when you try to print to a Lexmark 1270 x all-in-one

  I am running windows xp family.  I don't know what happened, but all of a sudden, I get this message when I try and print to my lexmark x 1270 "communication not available with the printer. I tried every troubleshooter, I contacted Lexmark support that they gave up, saying: it must be a file is missing from the windows registry, you can help me?

  It seems that if you say that the pilots were not reinstalled successfully.  What was the mystery file that could not be found?

  Do you remember how the software has been uninstalled?  Was something else than the control panel > Add / Remove Programs (or the link "Uninstall" from start > all programs) used?

  If you do not really clean things, attempts to reinstall the printer drivers may actually just end up putting the old drivers back in place.

  This is the easiest way to uninstall and reinstall the printer drivers: Article 1.  The critical step is #4.

  This page has more detailed advice for cleaning things out before you reinstall: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  I asked the firewall and antivirus applications because sometimes, some security software may interfere with the printers.  This shouldn't be a problem with the firewall of Windows XP and Microsoft Security Essentials.

  Finally, your problem could end up being hardware related.  Lexmark support has no hardware troubleshooting operation?  The manual for your x 1270 says:

  All-in-One is not communicating with the computer

  1. disconnect and reconnect both ends of the USB cable. For more help, see the
  installation documentation.
  2 unplug the power cord from the wall outlet, plug it in again, and
  Press Power. For more information, refer to the installation documentation.
  3 restart the computer. If the problem continues, remove and then reinstall
  the software. For more information, see page 16. [which ask you to remove the software using the link "Uninstall" - which is not complete, as described above]

  If you have another type of printer USB cable, you should try it exchanges.  Ideally, you need to connect to the printer on another computer, but maybe it's not convenient for you.

• I try to print, get the error message "Please enable setting"Enable bidirectional communication"in the printer properties dialog box.

  When I tried to print I got the message (please turn on the setting "enable bidirectional Communication" in the printer properties dialog box ") but I need to know how to do this.

  On the start menu, menu on the side right should be a button devices and printers, which will bring you to the page printers. There you can find your printer and right click on it and select Properties. This would be the place to enable two-way communication, but beyond that, I can't help you as I don't know what would the Properties window for your printer.

• HP Officejet 7612 large Format: Printer e-all-in-one-HP Officejet 7612 large Format printing paper selections not available in the printer dialog box

  Using Adobe Acrobat Reader DC to print the PDF to your computer. Print dialog box displays all the options paper size whatever the configuration by default or the selection of the paper size in the printer configuration. 11 x 17 paper in the printer and configured by default. Only four options are available: letter, legal, A4, and Executive. Nothing is wider than 8.5 "is available, and this so-called parameters up to 13 X 19 printer.

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/SG-en/drivers/selfservice/HP-OfficeJet-7610-wide-format-e-all-in-one-series/5153788/model/6879040#Z7_3054ICK0K8UDA0AQC11TA930O2

  Please select the appropriate operating system.

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  The desired print sizes should be there.

  Hope that helps.

• Offline files tab is not visible in the Folder Options dialog box

  I'm setting up the synchronization of files offline on my desktop PC. I am running Windows XP Home Edition SP3 (32 bit). But there is no such thing as the offline files tab in the box of dialaog from the Optrions folder. I disabled the fast user switching option. On my laptop, XP Professional, I don't have the same problem.

  I'm sorry, but Windows XP Home Edition is not the offline files feature.  This requires Windows XP Professional. Boulder computer Maven
  Microsoft MVP

• The Print Setup dialog box is provided by the operating system. To make sure that you can use the features of the full Adobe Reader printer, please set all printing of the print request dialog box options. Do you want to continue?

  What does this error message mean? How should I do?

  Hi cj80795752,

  Please refer to this topic for the same problem of layout - printing on tabloid pages

  Kind regards

  Nicos

• Series HP Photosmart Prem C310: Scan option not available in the scanners on Mac and Printers dialog box

  I had a problem with my connection Wireless to my printer. I deleted my printer to my preferences system (Printers & Scanners dialog box) by mistake. I was able to add the printer to my Printers & Scanners using the IP address of the printer dialog. The work of connection to printer and I am able to print. However, I lost the option of detection (the Open Scan option does not appear in the Printers & Scanners dialog box). I installed a driver from Apple and I also installed a driver of HP. The driver available for my printer model appears to be a patch only.

  Here is a screenshot of my Printers & Scanners dialog. Before I deleted my printer, she had a scanning tab.

  

  I tried to find a full version of the HP software for the printer but fails.

  Hello

  By consulting the user guide once more tried to locate all the other parameters that may apply, I could personally find not 1 but of course there might be there... as any router have different options and many...

  Have you checked with your ISP that you have the latest firmware for your router? any update of the firmware can help a lot with this kind of questions.

  It is the only router, right? It has no additional effect as a range extender. etc?

  You get power from the strong wifi signal for your printer and computer?

  Please let me know the results with the USB for the moment, the software is there as we have strengthened it even installed earlier...

  Please keep me with any change, I'll try to think of other measures to try while waiting...

  See you soon,.

  Shlomi

• "Engine of profiles is not available for the series in the worksheet selected" during the execution of a simulation

  When I run a simulation for a worksheet, it gives following message

  "Profiles of engine not available for the series in the selected worksheet. "To simulate the Please add relevant series of Simulation."

  http:// < Server: port >/engineManager/EngineManagerStarterServlet? Command = Status gave status as -1 (running). I started the server in simulation mode.

  Not sure that the question may be.

  Is there a log file where I can find more in detail. If so, what is the file name and where it is stored

  The error message indicates that the engine did not find a series in the worksheet to run the Simulation.

  Add the series of simulation and try again to call the simulation engine.

  Kind regards

  Shekhar

• WARNING: Type "SByte" is not available in the public API. Development of Onyx?

  Hello, I get the WARNING WARNING: Type "SByte" is not available in the public API.

  and various other warnings. The problem is that I see no code.

  Any thoughts? BTW is onyx under development?

  PS: I know nobody will answer so I wonder why I keep asking.

  The vSphere client employs some hidden APIs. If you perform an action in the vSphere client that uses a hidden API, Onyx will report the "warning: Type 'xxx' is not available in API public." message. Unfortunately, this limits what you can do with PowerCLI. Some know hidden API are tags, mode of EVC cluster and storage profiles.

  I don't know if the Onyx is still under development. Maybe some of VMware can answer this question?

• iCloud backup after iOS 10 - some files were not available during the last backup

  HI - we are a company with about 350 users of iPhone and iPad.  I put this in the iCloud in the community section, but I've seen other users have the same problem in this section, so I thought I would add here.

  In order to stop users add their own e-mail accounts on the iPhone that lock us the device through restrictions - deactivation of the accounts section.  It stops and then access the iTunes settings.  In the test of iOS 10.0.1, we have one of the devices (a 16 GB 5 s, who had been a backup at 7:20 that morning), improved 9.3.2 that went well with no obvious problems, then, after a few days to leave the handset to the function, we have lifted the restriction and the backup on iCloud to find any backup not occurred since the upgrade and a message 'some files were not available during the last. backup"in its place.

  If all our staff upgrade their phones (we gave says not yet) then the backups look like they stop.  It is easy to fix, as a manual backup, will complete the process, but you have to remove the restriction to do this.

  We tested on iPhone 5, 5 s, air iPad iOS 8 to 9.3.5 and all have this problem.

  I have exactly the same problem, 16 GB iPhone 5s as well. I plan on raising at my Genius Bar appointment today.

• I tried to backup my iPhone several times. I get a message indicating that some files were not available at the time of the backup. How can I solve this problem?

  I attempt to backup my iPhone several times and it does not backup. I received a message stating "several files were not available at the time of the backup. How can I solve this problem?

  Hello Lope8725,

  Looks like you are trying to backup either iCloud or iTunes, but you have found an error on files being unavailable. Can reply you with the exact wording or a screenshot of the message you are getting?

  In the meantime, you can solve the problem with either of those two sections depending on whether or not it's iTunes or iCloud:

  If iCloud backup could not be completed or if you can not restore

  or

  If your iTunes backup could not be completed or you cannot restore from a backup

  See you soon!

• Why is not available in the US store loose Office mac app?

  Why is not available in the US store loose Office mac app? Are their outstanding issues with the app?

  You must apply to the developer. Apple reserves the right to remove an element if it does not perform to his expectations or a developer may not able to promote and sell a product around the world due to specific restrictions

• How to restore the new tab button in the navigation menu when it is not available in the Customize?

  The new tab button disappeared from my navigation menu. None of the changes or upgrades have been made. While all subjects of support suggest going to customize the toolbar, the new tab button is gone either. There in the morning, disappeared in the evening without apparent reason. The + is at the end of the series of tabs, but not in the navigation toolbar and tab add + is NOT anywhere on a page it there is that a single label. I HIDE TAB BAR WITH ONE TAB 1.1 but have had for weeks, and the new tab button was always there. How to restore the button tab on the Navigation bar if it is not available in the choice to customize the toolbar?

  Don't you see the new tab button on the tab bar if you open the window customize?

  If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar configuration

  You can check the problems caused by a corrupt localstore.rdf file and try to delete this file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• An attempt was made to update me with firefox 15.0b6 two days ago but it's still not available on the page of version beta of firefox. Why?

  Is firefox beta 15.0b6 a true liberation? After 2 days, I still haven't seen on the page of beta version of firefox, so I don't let the update happens.

  It is a real update. I don't know why it is not available on the beta page, but the latest beta is beta 6.

• When you try to upgrade to photos in app store I get this message "the object you requested is not available in the store US." does anyone else have this problem or can you tell me how to find pictures in the app store

  "When you try to upgrade to photos in app store I get this message"the object you requested is not available in the store US."does anyone else have this problem or can you tell me how to find pictures in the app store" someone else meets this.  Is it me or is it pictures?

  Ever photos first? It should have been included when you first update of Yosemite and now El Capitan. I know that iPhotos updates get a message like that, but I didn't know the Photos app with a message with it.

  Update to iPhoto to Photos for OS X - Apple support