Y510 unable to get data from the camera.

Similar Questions

• Project is unable to get data from the server when more Flex Builder

  I have a strange problem...
  
  I have a flex project that communicates with multiple PHP files (which are located on a server). These are works very well when I run Flex Builder. For some reason, however it cannot communicate with the PHP files when I download or copy the files from the project elsewhere.
  
  I thought it might be a problem with some relative paths. But I discovered that although the project works when I run it from pojectFolder/bin/main.html, it does not work if I remove it from Flex Builder (without deleting the project files) and run it from the same file main.html .
  
  Isn't it strange?

  What you met sounds like a security sandbox issue. When you develop a SWF file using either Flex Builder or the Flash IDE, the SWF file is placed in a security sandbox ' local trust. This means that it can access any resource that is convenient for the development. But when you move the SWF to a server, the SWF file will have a ' remote' security security sandbox and then different rules apply. Using a crossdomain.xml on the remote resource file should solve the problem.

  You should see the security error when you apply. Here is a link for more details:
  http://www.Adobe.com/devnet/flash/articles/fplayer8_security.html

• Unable to transfer data from the laptop hard drive external/pendrive.

  Dear Experts,

  Unable to transfer data from the laptop hard drive external/pendrive.

  Each time that tried to transfer meesage seems to the authorization of the administration.

  Kindly help me to solve the problem.

  Concerning

  Hello

  Follow these steps and check:

  To take ownership of a folder

  a. click on the USB key you want to learnand then click on Properties.

  b. click on the Security tab, click Advanced and then click on the tab owner.

  c. click on change. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. click on the name of the person you want to give to the property.

  e. If you want that person to be the owner of the files and subfolders in this folder, select the owner of subcontainers and objects replace check.

  f. click on OK.

• Getting data from the nodes of event data

  Hi all

  I have a while loop with a Structure of the event and a Structure of case inside. The Structure of the event a lot of cases, and each of them is controlled by a different object (buttons, sliders, graphics, etc.). Sometimes, I have to use data from the nodes of event data to power a Business Structure that works like a State Machine in my code. To clean the block diagram, I want to 'export' data nodes using a single wire event data, but this is not possible because there is a conflict of data, since I get data of CtlRef in one case and Coords in others (for example).

  To resolve this problem, I'm feeding a beam to create a cluster and feed it to the box Structure data. However, the process is so painful, because I have to feed the Bundle function with constants of all sorts of data connected to him.

  Find attached an example. It is not the actual code but shows what I have to do.

  Thank you

  Dan07

  Why you do not pass a Variant to the structure of the case. In your case case simply make a variant of the appropriate data that you want to pass. I guess the case appropriate business structure will be to get called for the event. Given that you need to know the data type this case awaits can use the variant data VI and now you have the data you want.

• Unable to download photos from the camera

  Because my PC repaired and deleted vruses, I don't get the normal box, «what do you do with...» "When you try to dowloan photos from my camera. Any thoughts? Also note that my Pc won't load discs either

  Hi mikey stevens.

  1. What happens when you connect the device to the computer?
  2. You have security software installed on the computer?
  3. What is the number and the model of the camera?

  See the Microsoft article and check if that helps.

  A digital camera is not recognized in Windows Vista or Windows XP

  http://support.Microsoft.com/kb/927836

• PowerShot A40 cannot get pictures from the camera to my pc

  Canon powershot A40. PC not recognizing not not as portable device. tried to install the drivers that they do not load. Help?

  Hi crissac

  1. What is the exact error you get when you connect the device to the computer?

  2. what operating system is installed on the computer?
  3. the other USB devices is detected correctly?
  4. have you tried to connect to a different USB port?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can refer to the FAQ section mentioned in the link below and check if the steps help you connect the camera to the computer.

  http://www.USA.Canon.com/Cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a40?selectedName=ServiceAndSupport#ServiceAndSupport

  For assistance in obtaining the drivers or software, you can see below the link and check-

  http://www.USA.Canon.com/Cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a40#DriversAndSoftware

  I hope this helps.

• Code 43: Unable to transfer photos from the camera

  original title: camera problems

  I can no longer transfer photos from my camera to my laptop, it says it has detected a problem code 43?

  1 race try to fix:
  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
  If the fix it does not solve the problem follow the stuff on 'my USB device does not work.

  2. in Device Manager expand the "Controllers of Bus USB" look for the connected camera which can be described as a mass storage device, make a right click on it and uninstall it. Restart the computer, it must be reinstalled. If this does not uninstall everything under USB controllers and then restart your computer.

  3. try resetting the power, turn off your computer and then unplug it from the wall outlet. Let stand for about a minute and then plug it in the. If it's the battery of the laptop.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/USB-device-not-recognized-error-keeps-popping-up/6be4581d-8fbd-407F-815E-b475c35ca586

  4. try another cable to connect the camera to the computer.

• How can I sync 2 sony AVCHD images from the camera on the "date" as a prelude and import it in first pro?

  I have 2 sony camera popular with the AVCHD file structure. The two cameras are the same. How can I sync 2 sony AVCHD images from the camera on the "date" as a prelude and import it in first pro? Im working with 6.0

  
  

  Now I see the date taken in the import screen until I click "ingest". When in the trash, this option is there, but no metadata in there. It is therefore impossible to import images from two cameras and have these sorted.

  
  

  How can I get this sorted out before, so I can export for the first?

  Thank you. Tom van den Dool
  

  Hi Tom,

  How can I sync 2 sony AVCHD images from the camera on the "date" as a prelude and import it in first pro? Im working with 6.0.

  Sorry, you can not do as a prelude. You can request a feature here: http://adobe.ly/feature_request

  Thank you

  Kevin

• An FTP error occurred - cannot establish a connection to the host. Internal data error. Unable to send data from network.

  Recently, I started out of the blue to get this message when I try to connect to an FTP of Dreamweaver. I have CC was last updated. I have like 50 sites, more on different servers and none of them will connect. So I don't know, it can't be a server problem. Yesterday, everything was fine. I made no change what so ever. I uninstalled Dreamweaver and reinstalled him and I get the same thing. It is not the site for 30 seconds and then exhale. As soon as I hit the button to connect as 1 second later, I get this error. I have reset all modems and routers, etc. I can't find anything online about this specific problem. I'm at my wits end. I have projects due, but cannot connect. It's Thanksgiving and trying to solve this problem instead of spending time with the family. Any help would be much appreciated.

  "An FTP error occurred - cannot establish a connection to the host." Internal data error. Unable to send data from network. »

  Nope, that is not the case, I have disabled this service and now it works fine!
  He was not the firewall, but the update 25-nov2014 of Norton Protection against vulnerabilities.  ! Norton is the note and fix it for the next update in the coming days...

  I have

  

• Get the data from the current quarter

  Hello

  I was wondering how I would go about getting data from a table that is in the current fiscal quarter?

  It's the simple query to get all the data:

  $q_calls_sql = "SELECT * FROM renewal_contact WHERE userid ='". "." ' $user_id. "'";

  $q_calls_query = $con-> query ($q_calls_sql);

  $q_calls_numrow = $q_calls_query-> num_rows;

  Here's what I currently show the quarterly data, but only shows do not all data:

  $q_calls_sql = "SELECT."

  OF renewal_contact

  WHERE the timestamp > = GETDATE(), DATEADD (qq, 1, getdate ()) & & timestamp < GETDATE(), DATEADD (qq, 2, getdate ()) ';

  $q_calls_query = $con-> query ($q_calls_sql);

  $q_calls_numrow = $q_calls_query-> num_rows;

  All I have to do is show the num_rows of the above query.

  MySQL QUARTER() function deals with calendar quarters rather than the fiscal quarters. In the United States, first by the federal Government's fiscal quarter begins October 1, dealing with MySQL as in the fourth quarter. The first fiscal quarter in California begins on 1 July, that MySQL considers (rightly) as of the third quarter.

  A way to get the quarter is to use a custom like this function:

  function getFiscalQuarter() {
    $month = date('n');
    $year = date('Y');
    switch ($month) {
        case 1:
        case 2:
        case 3:
            return ["$year-01-01", "$year-03-31"];
        case 4:
        case 5:
        case 6:
            return ["$year-04-01", "$year-06-30"];
        case 7:
        case 8:
        case 9:
            return ["$year-07-01", "$year-09-30"];
        default:
            return ["$year-10-01", "$year-12-31"];
    }
  }
  
  $quarter = getFiscalQuarter();
  
  $sql = 'SELECT * FROM renewal_contact
          WHERE `timestamp` BETWEEN "' . $quarter[0] . '" AND "' . $quarter[1] . '"';
  

• Get data from a member of the region partitioned customer

  Hello

  I have a partitioned area, this region is in all 3 members, is it possible to get data from this region but only from 1 member of the customer, if so how?

  What is your definition of the region on the server? The three members have given? You set redundant copies? In addition, if the optimizeForWrite() of the service method returns false, the function will run the smallest number of nodes.

  Follow these steps:

  The redundant copies of the value = 1

  Returns true for optimizeForWrite()

  Make sure that all members contain primary buckets

  Perform function like you do above

  Barry

• Is it possible to see/get the data from the table to a dump file

  I have files dmp generated using expdp on oracle 11 g...

  expdp_schemas_18MAY2013_1.dmp

  expdp_schemas_18MAY2013_2.dmp

  expdp_schemas_18MAY2013_3.dmp

  Can I use a settings file given below to get the data from the table in the file sql or impdp the only option to load the data of table in database.

  VI test1.par

  USERID = "/ as sysdba".

  DIRECTORY = DATA

  dumpfile=expdp_schemas_18MAY2013%S.dmp

  SCHEMAS = USER1, USER2

  LOGFILE = user_dump_data.log

  SQLFILE = user_dump_data. SQL

  and impdp parfile = test1.par.

  No,

  DataPump cannot retrieve a dumpfile data in a flat file.

  Dean

• I've just updated to LR5.  I also have a new camera.  Nikon D800.  Try importing directly (from the camera) in LR.  But without success. Get the following message.  "The files are a camera which is not recognized by the raw format support in Ligh.

  I've just updated to LR5.  I also have a new camera.  Nikon D800.  Try importing directly (from the camera) in LR.  But without success. Get the following message.  "The files are a camera which is not recognized by the raw format support in Lightroom."  How can I import it please?

  I find the program file for Lightroom 5 and make an icon of office for him. And I would get rid of Lightroom 3. If you open Lightroom 3 and you see images in the old catalog, not the updated one.

• How can I get data from each associated XMLnode in movieclips separated when you click a line in the combobox

  How can I get data from each associated XMLnode in movieclips separated when you click a line in the combobox?

  A sample of XML is like this:

  <>planter

  < Lauvtre >

  < Botanisk_navn > Acer campestre < / Botanisk_navn >

  < Norsk_navn > Naverlonn < / Norsk_navn >

  Gronn < Farge > < / fan >

  H4 < Herdighet > < / Herdighet >

  < Hoyde > 10-15 m < / Hoyde >

  < / Lauvtre >

  I have a combobox where it shows the botanical name and the Norwegian name. But the rest of the info in movieclips seem separate.

  Someone has an idea how to do this? Can I use the trace function maybe? Here is my AS3 code so far:

  var loader: URLLoader = new URLLoader();

  loader.addEventListener (Event.COMPLETE, onLoaded);

  list.addEventListener (Event.CHANGE, itemChange);

  function itemChange(e:Event):void

  {

  your. Text = list.selectedItem.data;

  TB. Text = list.selectedItem.label;

  }

  var xml;

  function onLoaded(e:Event):void

  {

  XML = new XML (e.target.data);

  var it: XMLList = xml. Planter.Lauvtre;

  for (var i: uint = 0; i < il.length (); i ++)

  {

  list.addItem ({data: it.}) Farge.Text ([i]) + "\n"+ it.» Herdighet.Text ([i]) + "\n" + it. Hoyde.text ([i]),

  label: it. Botanisk_navn. Text() [i] + "\n"+ it.» Norsk_navn. Text() [i]});

  }

  }

  Loader.Load (new URLRequest ("lauvtre.xml"));

  Thank you!

  Rheus.

  I don't know what you're trying to do.  but, if you want to fill one combobox with the botanical names and when one is chosen, the other use of logins:

  var loader: URLLoader = new URLLoader();

  loader.addEventListener (Event.COMPLETE, onLoaded);

  list.addEventListener (Event.CHANGE, itemChange);

  function itemChange(e:Event):void {}

  var selectedObj:Object = a [list.selectedIndex]

  trace (selectedObj ['fan'], selectedObj ['Botanisk'], etc);

  }

  var xml;

  var a: Array = [];

  function onLoaded(e:Event):void {}

  XML = new XML (e.target.data);

  var it: XMLList = xml. Lauvtre;

  for (var i: uint = 0; i

  list.addItem({label:il[i].child('Botanisk_navn').toString()});)

  a [i] = {'Fan': it [i].child('Farge').toString (), 'Herdighet': it [i].child('Herdighet').toString (), "Hoyde": he [i].child('Hoyde').toString (), 'Botanisk':il[i].child('Botanisk_navn').toString(),'Norsk_navn':il[i].child('Norsk_navn').toString()};}

  }

  }

  Loader.Load (new URLRequest ("test.xml"));

• How can I get the filtered data from the first form

  How can I get the filtered data from the first form in a second form to make an update of the multi.
  Thank you very much

  William,

  I would use for this collections. A link is good if you need to pass a single value.

  1. create a collection
  2 fill the collection with your result set
  3. go in the page target and uses a method of a query in your link to this page
  4. your target page receives a request and allows you to edit documents.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------