Profiles of router SIP (normalization of the number)
Hello, all!
I have some difficulty to come with the regex that is appropriate for the scenario. Does anyone have an idea how to write a translation for outgoing calls rule better?
Scenario: Extension 75001 dials 123-456-7890.
Path of the call: 75001--> CUCM-(SIP Trunk)-> CUBE---> SIP Trunk (PSTN)
Requirement: PSTN requires the full 10 digit phone number in the SIP header or it will reject the call.
Solution: Change the SIP header to translate the extension to a full 10-digit number.
Question: Phone number is 555-123-5001. 7 principals must be bare and only the last 4 digits should then be preceded the NPA - NXX.
For example...
75001 dials 123-456-7890. Appeal to CUCM. CUCM forwards calls to the CUBE. CUBE translates by the SIP header "[email protected] / * /' to"[email protected] / * /'.»
I believe that this can be accomplished with SIP diversion header manipulation, but I'm not totally understand the syntax behind it.
request INVITATION sip-head Diversion change "
Thanks in advance for your time and help! You need a header for reference because it is only used for call forwarding. what you need, is party-remote-ID or P - asserted-identity a, whereby your cucm is configured to use... "change request INVITATION header sip remote-party-ID" "" My.CallManager.Home >" Replace the NPA - XXX with the correct number, you need Please note all useful posts "opportunity is a haughty goddess who don't waste no time with those who are not prepared." Tags: Cisco Support Apple, I got profile - changing can be reached at the number In my Apple ID number profile "can be reached in the" watch my sons phone number. How can I change to show mine? Your Apple ID 4 manage your ID primary Apple, rescue, alternatives and notification email addresses - Apple support Hello everyone, I have a weird and frustrating problem with some Linksys WRP400 and I hope you can give me advice. Long story short: the voice on the WRP400 line keeps stop working, even if it is registered on my SIP PBX. Only a reboot of the router or a stop put on the line temporarily fix the issue. Let's add some details: I had a lot of WRP400 installed and running, and not all of them have this problem. They all have the same configuration. I tried to work around the problem, reducing registry expires 3600 to 1200, defining to call without Reg and years call without Reg, setting on restrict the IP Source address and reset daily at 05:00. It doesn't seem to help. When the problem occurs, if I call the voice line number I get an error "the number you have dialed is not in service" or similar. Sometimes my clients said they can make an outgoing call, while the problem is still on, but more often, the line is totally silent on the outbound road. On my SIP PBX, I see that the number is regularly recorded, with the right timing. If I do a sniff of Wireshark on my SIP PBX, I see some regular "ask: INVITE sip:[email protected]/ * /: 5060; transport = udp, with description of session' a PBX to the router but the router never answers. If I reboot, the vocal line to re-register and start working again. I have attached a screenshot and the Wireshark Sniffer. I use the 2.00.32 latest firmware. You have any advice? It becomes an annoying problem and I am groping in the dark. Best regards Maurizio PS: Should I I asked Belkin or is it always in the right place? --- http://about.me/mauriziotroilo Hi, we use the WRP400 of the years and the voice module has always been problematic. I have a theory on this problem: I think that the safety function to "Restrict the IP Source address" crashes after a few hours of regular work and it filters all incoming SIP messages. You can confirm this idea by turning on the trace of the sip. In my case the trace shows all SIP entering until the reboot request. Can I ask you how many CPES you have? What is the frequency of this problem? In our network, we have about 2000 installed platform and we must restart on unit 2-3 per day. Kind regards. Extend an AirPort Extreme with a Terminal AirPort Express increasing the number of users? I have an AirPort Extreme 2 years ago. Based on the technical page of the product, the router can theoretically connect up to 50 users. That's more than enough if used at home. However, I intend to deploy a network of airports in our new office building and we have more or less 50 employees. Because everyone has a smartphone that it needs to connect, I try to at least 100 users/devices. Which includes all the network printers. Obviously, an AirPort Extreme is not enough. Another thing, I have considered is that the office building is 2 floors and all the walls are made of concrete, which means the distribution of the wifi signals is affected. I thought to extend an AirPort extreme with 3 more AirPort Expressare (mobile network). It's 2 APs on each floor. That should solve the problem of distribution wifi. I'm not sure the first problem - 100 or more devices into a single network. So extending an AirPort Extreme with 3 more AirPort Expressare (making a roaming network with 4 access points) increases the number of potential users of 50 to 200 (assuming that each access point can connect to 50 users)? In theory, Yes. But you must take this specification of 50 users with a grain of salt. Once there are 20-25 users on the same airport access point, things will slow down significantly. The system will operate as of cold molasses with up to 50 users on the same access point. Quite frankly, in a business application, you need a software router. Apple routers are designed for home use. Another way to say the same thing, is that Apple does not routers Apple at the Apple Store. Who could tell more than anything whatsoever about the suitability of the products in your proposed network. My advice would be to get an IT professional in and review your needs... before you move further. Restore or increase the number of lightweightThemes stored in prefs.js Hi, since Firefox lets you keep a list of people with disabilities "light themes" to try because later, saved in the prefs.js (shown in the Extensions > appearance in Firefox) ive been setting up a collection and yesterday found https://addons.mozilla.org/en-US/firefox/user/birdyann/themes with a lot I wanted to try, but did not know that Firefox limit disabled themes at 30 , so after the addition of more than 30 of these themes to my list of disabled, open all the themes disabled id was on the list have been removed before now. is there anywhere other that prefs.js I can watch what's going to tell me what lightweightThemes I * allowing * in the disabled list? is it possible to get prefs.js to increase the number of disabled themes it will keep track of? Firefox stores a maximum number of Personas (DEFAULT_MAX_USED_THEMES_COUNT = 30) data If you install more Firefox Personas will remove other Personas to make room for the new identity, so it is best to keep a list or bookmark the site of your favorite characters. You can also use the Personas Plus extension to handle more Personas. The list of installed Personas is stored in the prefs.js in the Firefox profile folder in the pref lightweightThemes.usedThemes in format JSON object ({'id': ' # ', 'name': 'xxx',...}). The first entry of this pref is the currently used character. How do you change/edit the number of cell phone in Windows Live Hotmail? I followed the pages guests who claim will allow you to change your mobile phone. But when you get to the next page, there is nothing when allows you to edit or change the number. The cottage the old phone number (which I have not used in 5 years)... I'm trying to get the calendar to send appointments on my phone. Hello I just did this to remove an old phone number - Hotmail - right superior Options - more options. This is what worked for me, however if you have any problems then use Support of Hotmail. --------------------------------------------------------------------------------------------------------------- Answers is a peer group supported and unfortunately has no real influence on Hotmail. HotMail has its own Forums, so you can ask your questions there. Windows Live Solution Center - HotMail - HotMail Forums Solutions Hotmail - Forums Hotmail - Solutions How to contact Windows Live Hotmail Support Windows Live Hotmail Top issues and Support information Error message "your account has been locked" when trying to connect Compromised account - access unauthorized account - how to recover your account Hotmail hacked? Take these steps I hope this helps. Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">-> the number who call this number 970-210-3550 can I get the number call my wife phonoe 970-210-3550 Hello It there a call saying they were from Microsoft? =========== Yes, it's a SCAM! The number is usurped or forwarded to another number, perhaps another country. 970-210-3550. ======================== Avoid scams to phone for tech support Scams by e-mail or web: how to protect yourself - understands what to do if you How to recognize phishing e-mails, phone calls or links In the United States, you can contact the FBI, Attorney general, the police authorities and consumer The Internet Crime Complaint Center (IC3) is a partnership between the Federal Bureau of Investigation No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited Scams and hoaxes Microsoft Support Center consumer Microsoft technical support Microsoft - contact technical support I hope this helps. Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">-> Can I change the default settings such as the number of seconds that each picture is displayed in windows movie maker? Now she comes up a 7 seconds... I would like to change it to 6 seconds. Hello My friend John Papa - MVP - is the expert on Windows Movie Maker. PapaJohn.org PapaJohn - online tutorials Windows Movie Maker Tutorials - check the sounds of the addition in the left menu and others on the Windows Live Movie Maker help & how-to and Forums are good sources of information: Windows Live Movie Maker that works in Vista and Windows 7 Official Support of responses - Movie Maker Forums site- ==================== These might help: Getting started with Windows Movie Maker Import video, photos and audio on Windows Movie Maker Get a movie in Windows Movie Maker Make a movie quickly in Windows Movie Maker (AutoMovie) Publish a movie in Windows Movie Maker I hope this helps. Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">-> How can I make my PC act as a router to connect to the Internet? How to make my PC act as a router
See you soon,. Hello You need Virtual WiFi: You may not have that unless you try to connect to other WiFi devices via your computer and Check with the manufacturer of system and/or support updated real manufacturer Sites and WiFi device drivers. Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually. Installation and update of drivers under Windows 7 (updated drivers manually using the methods Download - SAVE - go where you put it - right click – RUN AS ADMIN. You can download several at once however restart after the installation of each of them. After watching the system manufacturer, you can check the manufacturer of the device an even newer version. Repeat for network card (NIC) and is a good time to get the other updated drivers as ========================================================================== More information on what WiFi devices a virtual: (as noted above, if the device or the driver is not The WiFi device and the driver is installed must support a Virtual WiFi configuration. Check with the system Windows 7 adds native Virtual WiFi from Microsoft Research technology How to setup virtual Wifi in Windows 7 without any additional software Connectify allows possibility virtual WiFi in Windows 7 machines On the wireless network hosted
Build a Wireless Home network without router - see Windows 7 section Transform Windows 7 into Wifi Hot Spot with Virtual Router free tool
========================================= 3rd Party Solutions Connectify is a software easy to use for Windows 7 computers router. Virtual Router - Wifi Hot Spot for Windows 7 / 2008 R2 I hope this helps. Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">-> The number of mobile phone to check my Hotmail account is incorrect. The number of mobile phone to check my Hotmail account is incorrect. I made a mistake when entering it and I want to put the correct mobile number registration Hello Answers is a peer group supported and unfortunately has no real influence on Hotmail. HotMail has its own Forums, so you can ask your questions there. Windows Live Solution Center - HotMail - HotMail Forums Solutions Hotmail - Forums Hotmail - Solutions How to contact Windows Live Hotmail Support Windows Live Hotmail Top issues and Support information Compromised account - access unauthorized account - how to recover your account Hotmail hacked? Take these steps I hope this helps. Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">-> The number of cores in Windows Vista can support? Windows Vista is able to make full use of Intel Core i3, i5, and i7 processors? If not, the number of cores maximum Windows Vista can handle? Rannvijay Kapoor Hello Yes Vista can support all the people and all the kernels. Of course the material must also Note here that Vista supports an unlimited number of hearts. There are limits on the I hope this helps. Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">-> We get the error message "the service user profile Service does not logon, user profile cannot be loaded." Prevents us from entering the computer laptop-so how to solve this problem? Help? Hi LisaPie, Step 1: You can run the fixit available in the article below Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile. Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How to back up and restore the registry in Windows If you cannot start the computer in normal mode, try the steps in safe mode with networking Step 2: Start the computer in safe mode with network. To do this, follow the steps below: Access the menu advanced startup options by turning on your computer and pressing the button F8 before Windows starts. Advanced startup options menu select SafeMode with networking http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode Thank you, and in what concerns: Ajay K Microsoft Answers Support Engineer Visit our Microsoft answers feedback Forum and let us know what you think. Change the default profile for networks not identified in the register. Hi, I recently installed a copy of Windows 7 Home Premium. Recently, I tried to share files on a network computer to computer without router. I ran into problems with this, however, because Windows will just recognized here a network not identified, set its profile to the public and turn off sharing. I am aware that the default profile is editable through the local security policy editor, but being on the House, I am unable to access it, so my question is this: Is there a way to change settings of network profile for networks unidentified somehow outside the local security policy editor? (via the registry)? Hi Konaa, 1. Click Start, type Regedit 2. find hklm:\SYSTEM\CurrentControlSet\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318} 3. find your network card adapter and create a dword value named "* NdisDeviceType" and change the value between 0 and 1 and enable/disable network cards. You can also try this: 1. the Registry Editor open, if you are prompted for an administrator password or for confirmation, type your password, or click on continue. 2. Locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID} This registry path, click the (GUID) subkey that corresponds to the card network that is connected to the network. 3. on the Edit menu, point to new, and then click DWORD (32-bit) value. 4. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER. DhcpConnEnableBcastFlagToggle click 5.right, and then click on edit. 6. in the value data box, type 1 and then click OK. 7. close the registry editor. Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. How to back up and restore the registry in Windows XP: http://support.microsoft.com/kb/322756 Back up the registry: http://windows.microsoft.com/en-us/windows7/Back-up-the-registry ================= Find the Hello service by typing "services.msc"... START-> "search box" and Enter. This service is installed by Apple, if you have iTunes or adobe applications. =========== Thank you, and in what concerns: Limit the number of Port VLAN UCS Hi, Cisco: Is it possible to INCREASE the limit of the number of Port VLAN of 6000 by FInterconnect 1.4(2b) running? Imagine I have 4 and selected VLAN 10 vNIC by Profile Service and 2 vHBA. So in this case, how many local network VIRTUAL ports will be used? It's 60 or 40? Assuming that it is 60, he the man I CAN ONLY HAVE 100 Service profiles? I was wondering WHY is the VLAN Port count limit so low? What about the other fabric and HOW it contributes to the limit of the number of Port VLAN? Please notify. Really appreciate it as we roll and unroll UCS mass. RIL Yes makes sense. The golden rule in access to resources is only allow what you need, not just what is available. See you soon,. Robert the user profile service service has no logon and the user profile cannot be loaded. IAM not able to switch on the laptop. How to solve this problem? Hi ravichandrans36, Thank you for using Microsoft Windows forum. This error can occur if the group policy setting "do not connect to users with temporary profiles" is configured. To resolve this issue, follow these steps: 1 delete the profile by using the computer properties dialog box. To do this, follow these steps: a. Click Start, right-click computer and then click Properties. 3. Locate, and then expand the following registry subkey: 4 right-click the SID that you want to delete and then click on remove. 5 log on to the computer and create a new profile. For more information, see: http://support.microsoft.com/kb/947215 EDITING REGISTRY WARNING: Kind regards HP Compaq Elite 8300 SFF: Ram additional Elite 8300 SFF Hello I bought a vith PC (sold the first time 2013-02-14) used only 8 GB of Ram (4x2Go), so I would like to replace two of these modules of RAM of 2 GB with two modules of 8 GB but when I read the manual, it says I quote: "to obtain the maximum memor increment and decrement variable Hi guys I m new in the Labview programming and I m working with the NXT module in Labview 2010, and I have a few problems, because I m used to programming in C LabView is a kind of diferent than C The thing is wath I want to do a speed controller usi Hi, could someone help me please. I've been racking my brains out for almost three hours trying to solve this problem by trying different things. I have a code that retrieves a string of a robot control. The string is in hexadecimal and represents th DeskJet D2500 - cannot delete a large file for printing (QC) Description says "delete", but it erases ever. On WRT54G port forwarding problem I have a strange problem with my WRT54G. I try then I go to the "port forward range" page to setup port forwarding. The "port range" is completely empty, so I start just enter my information in the first row: Application: NAS Start: 5000 End: 5001 PrSimilar Questions
You can override this limit by creating a whole pref with the name lightweightThemes.maxUsedThemes and set the value accordingly.
On the left view - Hotmail - Options under Account - Details of the account - the account - security management
Info Security - manage - delete phone number and follow the rest of the guests.
http://windowslivehelp.com/
http://windowslivehelp.com/forums.aspx?ProductID=1
http://windowslivehelp.com/solutions.aspx?ProductID=1
http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm
http://support.Microsoft.com/kb/316659/en-us
http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2
http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41
http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx
http://www.numberinvestigator.com/phone/970-210-3550.html
http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx
think you've been scammed.
http://www.Microsoft.com/security/online-privacy/phishing-scams.aspx
http://www.Microsoft.com/security/online-privacy/phishing-symptoms.aspx
Watch groups. Arm yourself with knowledge.
(FBI) and the National White Collar Crime Center (NW3C), funded in part by the Bureau of Justice Assistance
(BJA).
http://www.ic3.gov/complaint/default.aspx
computer. So that's the fraud or scams to get your money or worse to steal your identity.
phone calls to help you fix your computer
http://www.Microsoft.com/protect/fraud/phishing/msName.aspx
http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3
https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1
http://support.Microsoft.com/contactus/?ws=support#TAB0
http://Windows.Microsoft.com/en-us/Windows/help/contact-support
http://Papajohn.org/
http://www.Papajohn.org/mm2-online-tutorials.html
main screen.
http://www.windowsmoviemakers.NET/tutorials/
http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-Help-Center?T1=T3
http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker?tab=no
How can I make my PC act as a router to connect to the Internet?
Could you please let me know? What should I actually configure the router?
Charel Sisouvong
many WiFi devices and their drivers do not correctly support the virtual pilot.
(Which is also updating the driver virtual.) If no new drivers WiFi are available then re - install the present
one.
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)
each installation.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm
below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
found)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html
(Those become your fonts of rescue system manufacturer).
Windows 7 like the updated drivers.
support the virtual device or is not required then it can be disabled).
Manufacturer support, their documentation online and drivers and ask in their forums (if any) known
questions. If the wireless device is supported for OEM sound drivers, visit their site for updated drivers and
known issues (Intel, Realtek, LinkSys and others).
http://www.iStartedSomething.com/20090516/Windows-7-native-virtual-WiFi-technology-Microsoft-research/
http://www.Blogsdna.com/5506/how-to-setup-virtual-WiFi-in-Windows-7-without-any-extra-software.htm
http://www.geek.com/articles/news/Connectify-enables-virtual-WiFi-ability-in-Windows-7-machines-2009112/
http://msdn.Microsoft.com/en-us/library/dd815243 (vs.85) .aspx
http://www.labnol.org/software/wireless-network-without-router/11494/
http://News.lehsys.com/2009/11/turn-Windows-7-into-WiFi-hot-spot-with-virtual-router-free-tool/
http://www.Connectify.me/
http://virtualrouter.codeplex.com/
http://windowslivehelp.com/
http://windowslivehelp.com/forums.aspx?ProductID=1
http://windowslivehelp.com/solutions.aspx?ProductID=1
http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm
http://support.Microsoft.com/kb/316659/en-us
http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41
http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx
support for Vista that shouldn't really be a problem.
the number of physical processors.
http://www.ExtremeTech.com/Article2/0, 1697,2068721,00.asp
http://support.Microsoft.com/kb/947215
http://support.Microsoft.com/kb/322756/
Shalini Surana - Microsoft technical support.
Visit our Microsoft answers feedback Forumand let us know what you think.
My laptop is Sony's new Vaio. Windows7. 4 GB of ram and 2.1 billion hertz processor with dual-core
b. click on change settings.
c. in the System Properties dialog box, click the Advanced tab.
d. under user profiles, click settings.
e. in the user profiles dialog box, select the profile you want to delete, click on remove and then click OK.
2. Click Start, type regedit in the start search box and then press ENTER.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756
Aziz Nadeem - Microsoft SupportMaybe you are looking for