Program cannot run because the lack of MSVCR110.dll

Similar Questions

• Chkdsk cannot run because the volume is in use by another process

  My computer was working fine until last night. Now when I connect I get a blue screen saying that the computer shuts down to prevent further damage from happening. I tried to restore to an earlier point in time when my computer was working but then I get the error:

  The OS disk (C :) has errors.
  Windows has detected corruption on OS (C :) file system. You should check the drive for errors before you can restore it.

  So I'm going to run the chkdsk utility, and I get the error:
  Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts.

  I'm confused because the chkdsk unility usually works, and I have no idea why she is being used by another process. I am clearly not very good with computers. I tend to do a lot of spywear and adwear on my computer. I have Spyware Doctor that removes any infection.

  Help, please. I've tried everything. Thank you.

  Asha22,
  It appears from your last post why chkdsk did not run on reboot and you gave an incorrect message is that you did not a space between the volume and the f number.  The correct syntax is:

  CHKDSK c: /f

  You can also run the utility disc in this way:
  http://windowshelp.Microsoft.com/Windows/en-us/help/bc1393cf-9f9c-79C7-0f91-9337c2c41f811033.mspx

  1. open the computer by clicking the Start button, click computer.
   
  2. right click on the hard drive you want to check, and then click Properties.
   
  3. click on the Tools tab and then, under check for errors, click check now.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
   
  4. click on start.
   
  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Note: If you select automatically errors in file system of fix for a disc that is used (for example, the partition that contains Windows), you will need to reschedule the disk check for the next time you restart your computer.

  The reason that it says that the disk is in use by another process is because it is in use by the operating system (Vista), and that's why it must be run at startup, before the operating system loads fully.

  Another utility, you need to perform is the System File Checker, if you can get your computer to start, either normally or in Mode without failure.
  To run the System File Checker tool, follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Let us know what these tests are and how we can also provide assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot run chkdsk - Chkdsk cannot run because the volume is in use by another process.

  original title: can I run chkdsk on win xp home, but when I try to use switches, I get cannot lock the current drive. Chkdsk cannot run because the volume is in use by another process. HELP PLEASE

  I run chkdsk without switches on win xp home. I told myself I file error and to set running chkdsk with /f. but when I try, I get the cannot lock the drive, chkdsk may not run because ect...  I tried in safe mode, same thing. I sfc/scannow, but it has not fixed the problem files. help please

  It's normal.  You can not run a check disk on your system disk because your system is to use.  The Message you get should ask you if you want to run it at the next reboot.  You must answer 'Yes' to this message, and then restart your computer.  A disk check should take place as it is restarted.

  FYI: A check disk can take hours if you have a large drive or there are a lot of problems on the disc and you cannot use your machine while the scan is in progress.  Better to operate during the night.  Also, I got checkdsk completely erase the hard disk to the point where the only option was to reformat and reinstall Windows.  Make sure that your data available are well-supported before running Chkdsk.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• "The program cannot start because it lacks comuter Layout Dll120EM.dll. Try reinstalling the program to fix this problem. "How can I do this?

  When I start my computer I get this error message: the program cannot start because Dll120EM.dll layout is missing from computer. Try reinstalling the program to fix this program. What program can not start? How can I reinstall the lack of enforcement?

  Hello

  Follow the steps below and check if that helps.

  Method: Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  
  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• Need help with tethering in LR. LR says program cannot run because MSVCR110.dll is missing? What should I do?

  MSVCR110.dll missing and prevents me from tethered shooting. What should I do?

  See https://helpx.adobe.com/creative-cloud/kb/error-opening-applications-in-windows-10.html

• I can't scan and my says hp solution cannot run because the device is not complete

  I use windows 7 64 it. My printer is HP Photosmart all-in-One Printer - C510a eStation. I use a laptop and a wireless network. Earlier my printer wasn't working, so I reinstalled the program using the cd, but now the hp solutions don't work and I can't use the scan operation. When I try to use the scan on the zeen function it just says: I am unable, and to use the software of the printer came with. I don't know what to do. I have to be able to scan, but also print. I don't want to uninstall or reuse the cd because it took hours for me to feel like work. Please help and thank you

  Hello frustrated_37,

  Based on the description of yourself, I recommend 2 steps mentioned below...

  1. Run the s/w CD, you will be prompted with options such as adding a device, install more software etc... Click on "Install more software", click on "HP Solution Center" if it is present.
  2. Root access file middle for scanning to work. To do this, you must click START > computer > program (x 86) > HP > Digital Imaging > Bin . Locate the hpiscnapp.exe file, do a right click on it and then "send to desktop" > Desktop (Createshort Cup).

  Double-click the created short that would open the scanining interface.

  Kind regards

  Jabzi

  Help the community by marking this post as a Solution If it has solved your problem!.

  If my post helped you somehow, please click on the blue KUDOS star under my name!

  Although I work for HP my messages and responses are mine.

• the program cannot start because the file d3d9.dll is missing on your computer.

  I get this error message whenever I restart my computer and he keeps me to access some Windows programs.  I know this is a device driver, but I can't understand that one.  Any help would be appreciated!  Thank you!

  DIRECT X file d3d9.dll is missing
  http://social.answers.Microsoft.com/forums/en-us/xpfiles/thread/2c639497-CFBA-4C6D-9155-f946f8dc1a45 I hope I could help

• The program cannot start because MSVCR110.dll is missing on your computer.

  HP Pavilion g7-2235 dx notebook PC.

  USB ports not working do not.

  Not installed Adobe Reader.

  The program cannot start because MSVCR110.dll is missing on your computer.

  Try reinstalling to resolve this problem.

  Reinstallation does not work.

  Any ideas anyone?

  Thank you.

  There are three files to download.

  vcredist_arm.exe

  Vcredist_x86.exe

  VCRedist_x64.exe

  Should I try any or all of them?

  Thanks a lot again.

• test of strength of dirt the program cannot start because OpenAL32.dll is missing

  test of strength of dirt the program cannot start because OpenAL32.dll is missing

  Hello

  Did you change your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  Check to see if the problem exists in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: after you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a.Click Startand then click run.

  b.Type msconfig and then click OK.
  The System Configuration utility dialog box appears.

  c the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  d.When you are prompted, click restart to restart the computer.

  Method 2

  If the problem exists, you can uninstall and reinstall the program.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Note: Make sure you have the installationd disk before you uninstall the program

  See also:

  How to manually remove programs from the add tool / remove programs

  http://support.Microsoft.com/kb/314481

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

• "Error system, the program cannot start because missing d3dx9_43.dll.

  Original title: error

  So I built a new computer and I was about to play my favorite game, legends, League then suddenly a message said, "an unknown DirectX error occurred and league of legends cannot start. Please make sure that your video card is to use the latest video drivers from the manufacturer. Know the name of my graphics card, ASUS GEFORCE GTX970, I went to their website and downloaded their latest driver. but who did not work, just made another pop up message that says: "system error, the program cannot start because missing d3dx9_43.dll.

  I tried several methods, but many of them do not work and I really need help to solve this problem. Now when I try both messages are in pop up. be really annoyed, I tried another game, Counter Strike Global Offensive, it's the same thing, he has done it before, but it doesn't have a pop-up, it just does not open.

  "I have tried several methods, but many of them do not work.

  This does not tell us what you tried, so I'll start at the top.

  d3d9_43.dll is one of the 'new' DX files, and you have a fresh install of Win7, you need to update DirectX

  (even if the "latest" DX files come from 2010).

  Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center

  DX files can be damaged. In this case you can remove the suspicious file in System32 and sysWOW64 and run the Web Installer to replace this file or reinstall all files DX using the full DirectX Redist (June 2010), which will overwrite all DX files (Web Installer does not overwrite existing files).

  The second option is often necessary because you don't always get a specific file mentioned in the error.

  Download details - Microsoft Download Center - DirectX Redist (June 2010)

  .

• The program cannot start because LibMySQL.dll is missing on your computer, try reinstalling the program to fix this problem, it is displayed as error on my desk.

  Original title: Mysql Libmysql Dll error correction

  The program cannot start because LibMySQL. dll is missing from your computer, try reinstalling the program to fix this problem, it is displayed as error on my desk. LibMySQL. dll is C:\Windows\System32, but I can't run the .exe file, I want to run, I can to do, how to fix this problem automatically, I have Windows7 64-bit machine, computer laptop lenovo T530

  Thank you!

  I solved this problem, I put this file LibMySQL. dll to the folder where the .exe file is, I want to run. Exe file, I want to run, cannot call LibMySQL. DLL in C:\Windows\System32,that is the question, I found on a forum suggestion what I have to do

• Problems installing the Apple updates. System error program cannot start because MSVCR80.dll is missing on your computer. "

  Original title: I am a computer newbie, could someone explain/direct me?  Many thanks, Mark

  Recently, I received an Apple update normal I-tunes.  Have done a little before, never with a problem.  This time, it seemed that everything was fine, then at the end (when expects a message "successfully installed", I received an error box with this: APS Daemon.exe - error system, the program cannot start because MSVCR80.dll is missing on your computer.)  Try reinstalling the program to fix this problem. "Well, since nothing else seems to work (or helping) and my music files have been backed up, I uninstalled I-Tunes successfully, then attempted to re - install.  I had to download the installation of Apple, which was very good. Once again, everything seemed to go smoothly, installation, etc. until it got to the point when he said "Marketing Services".  Then, as before - everything stopped and jumped up to the exact same APS Daemon.exe - error box system (with the same message) referencing MSVCR80.dll once again, saying that it is missing and try to reinstall the program.  From now on, I don't know exactly what that means (I know, I know) or if it's something someone like I could fix (or even try), or if I should just run down to my local computer store?   Never had any problems with the Apple or Windows updates before this one.

  Thank you to everyone how wants take a few minutes and help a person who has started working on computers far too late in life!
  Sincerely, mark Hawk

  Hello

  Uninstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  ___________________________________________________

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm 

  __________________________________________________

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• When I turn on my computer, he told me that the program cannot start because ash.dll base is not available in my PC.how I can solve it this issue.

  Thank you for allowing me to ask my question.

  My question is about the message poster on my PC window indicating that the program cannot start because ash.dll base is missing in my PC.

  So how I can solve this issue.

  This program is for AVAST ANTIVIRUS

  Ash.dll is usually associated with an infection.

  Install/run these two free utilities

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  http://www.Malwarebytes.org/products/malwarebytes_free/

  It could also be the case that Avast detected & removed the infection but left a remnent, this being the case closely check the entries in the msconfig Startup tab

• Error of World Of Tanks: the program cannot start because d3dx9_43.dll is missing on your computer.

  Original title:

  After the download problem

  I tried to play on World Of Tanks on my laptop Windows 8 and he says: the program cannot start because d3dx9_43.dll is missing on your computer.

  So I did some research, and Microsoft told me that I had to install the DirectX program. After I installed the DirectX software and tried to run, he gave me the following message is displayed: a necessary .cab file for installation is not reliable. Please check Cryptographic Services are enabled and the certificate file is valid.

  I don't know what to do to solve this problem.

  Hello Joseph,.

  Thanks for posting your query in Microsoft Community.

  I understand that you have any questions, by playing the game World of Tanks in Windows 8. We will certainly help you with the same.

  You can read the steps below for the game of automatic encryption Services Cryptography on AutoServices and then try to install the program again. To set the cryptographic on AutoServices, follow these steps:

  1. Start the Administrative Tools utility in control Panel.
  2. Double-click Services.
  3. Click Cryptographic Services, and then click Properties.
  4. Click Automatic for Startup type, and then click Start.

  Then install the latest version of DirectX for Windows 8 and see if that helps.

  How to install the latest version of DirectX

  http://support.Microsoft.com/kb/179113

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to so

  Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to someone in tech support that I did not understand, and I don't know what to do next. The tech gal was run, but once she hung up he returned to broken.  I have an idea, but that's just a guess - trouble started about the time I tried to open On1 of ps there has been a perfect icon effects 9 (for some reason, they decided to add the icon when I got it - I have 8) I clicked it and it loaded the update and then asked me if I wanted to try or buy - that's when I realized that I should have clicked on 8 and tried of back , but is either too late - I think, maybe this dll. 8 or 9 in with perfect On1 effects - and it has changed my settings in PS - and is the reason why it is not compatible - ideas? I have a pc with window7-Carol

  Try to run Photoshop without loading third-party plug-in. hold SHIFT keys when you start Photoshop.  The missing module is not Adobe software.