Program more like GoLive?

Similar Questions

• having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.

  help someone?

  Thank you

  Howdy Yaser of zoysia,

  It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  From: get help with graphics issues on external displays connected to your Mac.

  Thank you for using communities of Apple Support.

• can't use the iphone 6 s more like ipod touch for calls/texts?

  OK, it's probably a unique situation. I have two iPhones to verizon. One is a 6 sec more not active, the other is a 5s which is activated. Basically, I use 5S for when I go out (where I prefer to use a hand on a bigger screen), and I want to use the 6s more as a second phone (via continuity) exclusively at home (where I prefer a bigger screen on one-handed use), but I am running into problems.

  First of all, let me say that I tried a mini ipad for a few weeks... twice... and every time I found it is too big for what I wanted. I wanted a screen larger than my 5s at home, but I wanted to still be able to easily grab a single hand and use my thumb to scroll. And I wanted to put always in my pocket when I was moving from room to room of my house. The mini was simply too great for that. The 5.5 "more does the job much better. But then again, I prefer the small size of 5 when I when I go out, especially since I don't spend much time on my phone outside the House, so I couldn't use more to replace my main phone.

  I would like therefore to anchor my 5s when I go home and just use my more like my phone then at home. The problem is trying to get calls and texts of the function on the most through continuity. Both devices are signed in my Apple ID and are the same wifi network. But on my more...

  In message settings, under "imessage" he says only: "awaiting activation...". »

  In Facetime settings, under 'facetime' he also says 'awaiting activation... ". »

  The messages app shows no history of conversation.

  The facetime app, shows, however, that ONE of my previous facetime calls in history. The strange thing is that this call is not listed in my 5s facetime app even though it shows the call history, before and after this date.

  I tried to send/receive texts on my 5 since setting up the most and none appear on my. I tried to make a call, but there was some message automatic verizon to pay money to make the call. Tried not to receive phone calls still well.

  As I understand it, iphones that are not activated are simply ipod touch, but for some reason, this does not seem to be true, since on ipod touch, facetime and messages can connect to one identifier Apple and manage the calls and texts with full transparency.

  Any ideas? Much appreciated!

  Sorry... I'm a bit confused. Which phone has the SIM inside? You will use the 6 s + as an iPod Touch, but your post seems to say that you will use it as a phone your title says.

  Regardless, I think that you need to activate the "iPod Touch", using a SIM card, and then you could remove it. You would lose any function that relies on the SIM door of course.

  Activation of a phone is a thing of the part 2. One for the carrier, one for Apple. A real iPod Touch activation would be fair for Apple.

  I don't think or other device would do anything if not enabled. Internally, your two devices are phones and probably must be activated in this way. Out the SIM card after activation would be where your phone becomes an iPod Touch.

• When you click on all programs more say they are empty.

  Don't know what my kids did to our Windows XP laptop, but all the icons disappeared and when you click on all programs more say they are empty. I was wondering how I can return my games included with Windows for example.  I went on the Panel & clicked on add components, Accessories & utilities.  All I went to games on the internet.  No spiders, hearts, free cell, etc.

  Hello

  The following article might be useful:

  When you point to "Programs" on a Windows XP-based computer, the program list does not appear, or the list of programs is empty

• Manufacturing of Vista Media Center more like Media Center of Windows7

  Hello

  I have myself recently built a HTPC using a card mother MSI Media Live Diva and Windows7 operating system. The package on Windows 7 Media Center in my opinion is excellent. It does everything I need. The only problem I have is not being able to prevent the audio device on the motherboard to get into a State of sleep. There is a loud as it switches on and outside. MSI do not plan to provide the necessary drivers for Windows7, so I bit the bullet and bought thinking that Vista Home Premium media centers would be the same. Vista media center offers userbility limited compared to Windows7. Is there an update that will make the center more like Windows7 vista support?

  Sorry for the hike but I wanted to make it clear what I'm after.

  Kind regards.

  Unfortunately, there is no download available that offers the functionality of the version of Windows7 for use on a Vista machine.  Here are all the available downloads and you can see that this is not one of them: http://www.microsoft.com/windows/windowsmedia/download/AllDownloads.aspx?displang=en&qstechnology and http://www.microsoft.com/downloads/en/results.aspx?freetext=Windows+media+center&displaylang=en&stype=s_basic.  Make sure that your version has all the updates, because they can add a bit of the featurs you are looking for.

  Sorry for the bad news, but that's how it is.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Captivate do behave more like Powerpoint?

  Hey all,.

  I'm working on a project where we want to Captivate our platform (it is so easy to HTML and reactive), but we want to let him behave more like Powerpoint. The two main features, we would like to have are:

  • Allow one click anywhere on the screen or keyboard shortcut to move the presentation, rather than having to click on a specific button to continue
  • To get items that appear after another on the same blade. If there is a square, a circle and a triangle on a blade, what is the best process for them have melted in one at a time? It seems that the boxes and a break may be the way we do, but I hope there is an easier alternative. (or the one who seems most logical to me)

  Any help is greatly appreciated.

  Thank you

  You only need a click box if you want to control the appearance of the next one-click object. If they can automatically appears after the other (in order, is also possible in PPT) you need to click on boxes. This is a complicated example where I need clicks for a presentation on a top of Adobe:

  

  You see 4 boxes click, that I put on top of the other on a specific area of the blade, which is possible because they are staggered, not active right now. They have the action "continue". I have them did not on the whole slide, because there was also a button of form functioning as a next button that is not visible here as it is on the first slide, scheduled for the rest of the project.

• Easy transfer? More like transfer Moronically developed.

  Easy transfer should do one thing: transfer of things. There is a sense, it should do: easily. Microsoft may have the part of the transfer to the bottom, but it remains to be seen, since my transfer has not yet completed because of Windows Easy Transfer do not keep the computer in a sleep state.

  I began transferring more than 300 GB of data last night, closed the lid of my laptop and it opened this morning to make sure it was completed without error: Oh, wonderful, it's in the same place it was last night!

  Easy transfer let the computer go to sleep! Why the * would keep Easy Transfer NOT awake computer? What kind of buffoonery is? They MAKE the computer to perform the transfer, but they'll let the damn computer go to sleep.

  I didn't notice anything that read, "ensure you disable power options and keep your computer to a State awake during all the process of transferring everything.» But try to continue without connecting, it's impossible. They make sure you know it must be plugged, and they let you plug it before continuing. Why the * they do not you change your power settings, or actually do it for you? It would be EASY.

  It was smart of Micrososososoft to get to plug into your computer; It is complete asshattedness not having W.E.T. do something simple like, oh, I don't know, keep the computer awake while the transfer works!

  The default behavior of a computer running on battery, it's that the computer stops eventually. That has always been the case.

  So why MS ensure that users connect their computer, while neglecting to have the Easy Transfer program simply prevent the computer from sleep mode?

  There are countless applications out there preventing a computer to sleep while the application is active. Windows Easy Transfer is expected to be one of them. This is my point of view.

  Or at least a simple opinion: DISABLE the auto sleep mode before running Windows Easy Transfer.

  You closed the lid.  Closing the cover is different from the computer just go to sleep after no activity.  The action in question is not 'idle sleep', but a setting separate relations little: what to do when the lid closes.  After all-, I set the system to STOP when I close the lid.
   
  Instead of thinking, 'you know - usually when I do that the laptop goes to sleep.  I better check right now to make sure everything is still working just in case. "- you closed it and went to bed without a second thought and then had crazy when you look at a few (2? 4? 6? 8?) (More?) hours later and realized that closing the lid always had the same effect he always had before.  Sucks - but it's done with, and you are unlikely to make that mistake again once - you at least check after you have closed the lid for a minute or two to see if the computer is still awake / work.
   
  While I do not deny that maybe add a warning on the mode disabling 'sleep', by closing the lid on your computer still have some impact, he was seized, hibernation probably needs to be turned off, power outages could cause problems, hot coffee is hot and could burn you, etc might be a good idea - there should be responsibility of the user to verify that the process continues on a regular basis - especially if a deed is done would PREVENT normally a computer to do anything.
   
  You knew that he would be restarted if you have automatic updates on and it updated and needed to restart?  Yes.
   
  Scheduled tasks are not disabled or the other.  Hope you don't plan a backup or defragmentation, or the CHKDSK command at the time of transfer.
   
  Some things require a little baby-sitting.  Unhappy - but probably will always be true.  ;-)

• On 420 versus T61 14 "widescreen display size? (Is the 520 more like my old t61?)

  I had a Thinkpad T61 14 "widescreen notebook for about 4 years. I really liked, and the size of the computer was ideal for me - small enough that I can use it on a plane, but a fairly big screen that I don't feel too cramped.

  The t61 began to die, so I thought it seemed like a good time to replace it with a new thinkpad. I ordered a T420, happened today.

  I was really surprised and disappointed to see that while the machine itself seems to be of similar size, the screen seems to be a little less good: about the same width, but between 1/2 and 3/4 inches less height. I foolishly thought that this laptop would have the same size as my old screen.

  Is it a modification of the design of the older systems?

  I'm curious: is there a model that is more comparable to the dimensions of my old T61? Is the 520 more close to these dimensions? Or is it a computer physically more grand/more heavy than a 14 "T61? I would rather not a computer who is heaver than my old T61, and I prefer not to have a computer that is more difficult to exploit in a tray of aircraft seats.

  Suggestions appreciated!

  screen went from 4:3,-> 16:10-> 16:9, so there is a change of dimension of the T61 on the T420.

  T520 is a laptop 15.6-inch similar to T61 15.4-inch wide screen, but it loses also a few height due to the change in dimension.

  T420 is heavier then the T61. If you want something lighter than the GET T61 the T420s, which is a model thin and only weighs 2 kg or there is everything.

• How to make a program more former execution in windows 1.5 to enable my scanner HP scanner?

  I get an error message "incompatible application" when I try to scan on my HP Photosmart Plus B210 series.  I ran the troubleshooting and the supposed solution said to make older programs in this version (1.5) of Windows.  How to make a version more old execution?

  Hello

  Are you referring to Windows Azure 1.5 and if so you can post your question to:

  http://social.msdn.Microsoft.com/forums/en-us/windowsazuretroubleshooting/threads

• IS THERE A PROGRAM MORE SHORT? DISM / online/cleanup-image /restorehealth

  Hello

  Every now and then I check my files on my computer to see if all are corrupt! I run SFC/scannow.  If there is no files corrupted at the end of the scan, usually, SFC / SCANNOW will not fix them! A technician came through this wonderful program called dism / online / cleanup-image /restorehealth! He totally corrects my CBS corrupted log files! The only problem is that this program takes so much time to run, I guess more or more! Is there a version of update, the shortest time of dism/online/cleanup-image /restorehealth program? I don't want another program that does the same thing if she requires a lot of steps!

  Thanks a lot for your help.

  HONEY BEAR 100

  E-mail address is removed from the privacy *.

  Hello

  Thank you for your quick response.

  I suggest you consult the following articles about the System File Checker tool & DISM command:

  System File Checker

  DISM commands to fix the Windows Image

  See also:

  DISM command-line Options Maintenance operating system package

  Hope the helps of information.

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  Thank you

• limitation in the use of sql * more like a database for applications

  Dear expert;
  
  I would like to know everything, what are some of the main limitations using sql * more as your database in the application in addition to designing the user interface is pretty nice... and google does not produce answers to my questions also unfortunately

  user13328581 wrote:
  I don't know about the drivers, I just need an IDE that is very similar to the PL/SQL Developer who will give me the opportunity to create the tables and their relationships and other tasks DDL that is why, at the beginning I was just wondering if it is OK to use sql * more for everything that...

  Yes, sqlplus allows you to do what you want

• try to uninstall the program and that it will not be finished or I would uninstall programs more

  downloaded the toolbar following mixi DJ, my backup pc, player vaf, supreme savings and optimizer prov3.1 and tried to uninstall it constantly says wait until the next program is uninstalled for continue. program im trying to uninstall is only 42 MB, but just used finished, or I want to uninstall something now. any help would be extremely grateful. I am a novice on computer. Thank you.

  Go to the control panel and click under the programs heading, "uninstall a program". A massive list of programs should pop, click the program you want to remove and do what he asks and the program should be deleted.

• Opening a program opens like a black window

  Try'ng to open my user guide, but it opens as a black window... that happened after I installed windows2011 and uninstalld to install windows 9... I did a system recovring and restored the system towice... but nothing.

  A utility to Unassociate Types of files in Windows 7 and Vista
  http://www.Winhelponline.com/articles/231/1/an-utility-to-unassociate-file-types-in-Windows-7-and-Vista.html

  You may need to uncheck 'Hide known file types' in Control Panel / folder Options / view to see file extensions

  What file extension is your 'user guide', it is a .pdf file?  If so, try one of these.

  Can your browser opens the page?

  Test PDF file
  http://www.education.gov.YK.ca/PDF/PDF-test.PDF

  It will allow you through the option Save as to save it as a PDF file on your hard drive?  You can then open it via Adobe Reader or Foxit Reader?

  Foxit Reader 3.2 for Windows
  http://www.foxitsoftware.com/PDF/reader/Reader3.php

  If you can't do either try to test with your security programs disabled.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  See in the Control Panel control Panel\All Items\Default courses "associate any type of file or Protocol with a program" and make sure that .pdf is correctly associated with Adobe reader or Foxit Reader.

• My phone is coming is more like a device in Explorer

  I used to be able to plug my phone (iPhone 5 s) into the computer via USB, and it show up as a device on my computer, so I could copy my pictures on my computer. All of a sudden he is no longer present. I know that the device driver has to work, because the phone open iTunes, and it synchronizes on the phone. However, the phone does not appear in the list of files. Someone know if there is a particular problem on this point, or is this just me? I really want to download my photos! How can I get the computer to recognize the phone again as a device with files to download?

  My computer running Windows 7, and the phone is on IOS 10.0.2

  Post proposed by the facilitator for the appropriate forum placed

  It is more of a problem to Apple to a Windows problem.

  Also, I have an iPhone running iOS 10.0.2 5s and recently began to experience the same change in behavior.

  Just as you describe, my iPhone is detected by iTunes - it syncs - but not by Windows (devices and printers shows that the pilot Apple Mobile Device and not the iPhone) and therefore you can not access the files (photos and videos) on the iPhone from Windows.

  The usual answer from Apple is to completely uninstall and reinstall all of the iTunes software.  If you want to try it, see https://support.apple.com/en-us/HT204275

  My experience, however, is that through all that may - or may not - help.  And even if it does not help, the problem quickly.

  Without any conclusive evidence, my guess is that Apple made some either IOS 10 change or in the Apple drivers installed with iTunes 12.5 causing lack of detection.

  I discovered, however, that if you unlock the iPhone before connect you to the computer, the iPhone is always recognized correctly.  That didn't used to be necessary, but as a workaround, it's pretty easy to do.  Maybe update to iOS 10.1 will fix things, but there's some reason - that I don't remember at the moment - why I decided not to do this immediately.

  

• Hello, my turbo pascal programs more parpadean under win7 even in mode compatible but worked well under Xp

  programs 'back' in turbo pascal that much use the display functions. Error message: "this system does not support mode full screen. Choose 'Close' to terminate the application. »

  Hello

  Please select your language from the link at the bottom of the page to the left to post your question in the language of your choice. The forum in which you've posted is for English only.  If you can't find the desired below language, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you