Program of photography for new customers

Similar Questions

• Complete individual - for new customers plan

  Is there any chance creativity plan cloud of "Comprehensive individual - for new customers" can be used on computer then one more? If this is not the case, is it possible that I can transfer the subscription to a regime of "all businesses", because it was not clarified when buying it was only eligible to a single computer and not active on behalf. Thank you and I look at prior to hearing all the world little

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Subscriptions CAN NOT be used at the same time (to be noted in the link above of the license)

• How to create a survey online or for new customers?

  Hello

  I want to create a survey for my new graphical clients. I have a few business questions to new clients and need written answers. I want to stop sending a pdf form, is not well designed for an excellent online form.

  In fact, I know how to how I will present and send the page, but not for a tip: how to create an editable multiline text field online by someone Muse?

  I tried to use this type of text box of a contact form, but it is not effective.

  I tried a wuffoo embed widget, but I don't want to use an external service (like getosmosis.com, or something)

  I have well on the browser in editing, but I don't know if it's a good idea to do this, or really effective.

  I want to build a page scrolling with anchor points and a vertical menu sticking to the 10 chapters of questions and a "send" button at the end to receive the form in my Inbox mailbox, exactly like a message in a contact zone.

  You have an idea? Advice?

  Thanks for that, guys.

  Mikael.

  Forms are forms and editing in the browser has nothing to do with it. I'm afraid that you really need to use other services or sign up to a British Colombia account Pro, if it is really so important to you.

  Mylenium

• I bought a new computer and downloaded my lightroom 4 to it. When I installed the program it asked for my serial number and I impujted it. Then he asked my previous serial number of my purchase of lightroom 3. Since I upgraded to ligtroom 4 I

  I bought a new computer and downloaded my lightroom 4 to it. When I installed the program it asked for my serial number and I charged it. Then he asked my previous serial number of my purchase of lightroom 3. Since I upgraded to lightroom 4 I don't have the serial number for the version 3. How can I get the serial number of my version 3 so I can activate my program version 4

  If you have Lightroom 3 is still installed, you can get it from there.

  If you do not and you have your box/drive, it should be there.

  IF you do not have one of the people, and you have registered your software, you can log in to your Adobe account and get it there.

• What is exactly included with the new package of photography for adobe?

  well first of all, I'm in love with all these massive changes all around.

  Secondly, I'm kinda a hot mess.

  For starters, I put to level my poor old PC to a Mac (it was time!), it means I'm losing all my previous software. (It's time to also update in all cases) I currently have installed cs4 and also lr4 on my PC. I pick up my new Mac mini tomorrow and would like to have a solid game plan.

  I'm having a hard time to understand what the new cloud options, as well as the package of photography for $9.99 / month. With that, cloud creative included? do I have to buy cloud creative membership in addition to the packaging of photography? This includes full use of photoshop and Lightroom versions? And finally, what is the advantage vs lr5 buying outright (physics software) and / or using Photoshop full download purchase and use by creative cloud. My how times have changed... I feel so out of the loop, however extremely excited for the changes and the inspiration.

  Thanks in advance and follow the incredible changes.

  RP

  My understanding is that the photographer $ 9.99 package includes 2014 CC Photoshop and Lightroom CC 2014, as well as 2 GB of cloud storage. He does not include access to the rest of the apps universe CC (what you would get with a full package of CC), nor does it include TypeKit as part of the package. It also includes access to iPad and iPhone applications of Lightroom and the Photoshop Mix app for the iPad.

  Here is a link to the press release: Adobe Releases New Creative cloud photography Plan for $ 9.99 per month

• Version 11.2.0.3 - Can this be downloaded new customers for the assessment?

  Database Standard Edition - Win 64 bit 11.2.0.3 - this is downloadable by new customers because they do not have to connect to support.oracle.com?
  Please provide the link to download.

  Salvation;

  11.2.0.2 and 11.2.0.3 version can be downloaded from metalink only. You need the identifier of the customer support called CSI for can connect metalink (https://support.oracle.com/CSP/ui/flash.html)

  If you do not have a metalink account there is no way to download this patch.

  Simple process:

  (1) purchasing a perpetual license or terms of Oracle;
  (2) at the beginning of the period, during valid that you buy
  Support for the period (1 year);
  (3) oracle sends you the CSI.

  Easy to do at http://store.oracle.com with a credit card.

  You can follow below doc to can see what is patch numbers
  Quick reference to group of patches Patch [753736.1 ID] numbers

  I also suggest to see:

  NOTE: 430449.1 -how to find DB fixes for Microsoft Windows My Oracle Support Platform
  11.2.0.x Oracle database and networking for Microsoft [1114533.1 ID] platform patches

  PS: Please don't forget to change the status thread answer whether it is possible when believe you your thread replied, he pretend to wasting time in other forums users while they are looking outstanding which is not answered, thank you for understanding

  Respect of
  HELIOS

• query to coil for all customers

  We have weekly_orders of the table have IDs customer, orderno, order_date, and other columns
  
  I programmed the work that wraps each in a file.
  
  Coil /u01/9009.txt
  Select * from weekly orders where client_id = 9009;
  Spool off;
  
  Coil /u01/9010.txt
  Select * from weekly orders where client_id = 9010;
  Spool off;
  
  And so on...
  
  It's kind of manual effort to add new customers
  
  Is there a way we can get the data for each client in a file?
  
  Any help is very appreciated
  
  Thank you

  Hello

  In the sample data that you posted the client_ids were all numbers.
  Is this the case in your actual data, or they are strings? May contain strings & s, such as "AT & T"?

  After the two scripts you have written, weekly.sql and weekly_one_client.sql.

  Also post weekly_all_clients is being created. If it is long, just after the first 5 and last 5 lines

• Cannot automatically download new messages and auto answer with out-of-Office message must manually check for new messages, so he can do

  I use Mozilla Thunderbird 31.3.0. I know how to create a message filter, to implement a response message automatic, but impossible to get Mozilla to automatically download new message and auto reply with the message in the filter, unless I have manually check for new messages, this is the only way to make it work. I looked online and can't seem to find an answer to that particular question. According to everything I found, I have the right boxes checked in the server settings: automatically check for new messages at startup, check new messages, check for new messages every x amount of minutes. It's one thing to have leave my computer and open Thunderbird for this works, but having to manually check for new messages get the AutoReply to work defeats the whole purpose of having an automatic response, because I use them for vacations, holidays, etc. I wondered if there are security settings that cause this problem, but if so, I don't know what changes to do to them. Thanks in advance for any help. It drives me crazy.

  I find it a little odd that Thunderbird does not mail on the calendar, you may have an add-on or antivirus program that prevents this.

  Now shift while you start Thunderbird will begin with disabled modules to check if the messages are automatically.

  By air is to the right, use the autoresponder Verizons. This link might help with this http://www.verizon.com/support/residential/internet/highspeed/account+tools/email+tools/questionsone/85621.htm#
  You say that not having is not such a context in Thunderbird is something that needs fixing. This idea comes across because Outlook has such an option. what most people don't know of it only works with Exchange server. There is no "vacation response" in the specifications of the mail server so every server implements differently.

  As all cars have a radiator, you can't take any radiator, and simply put, they are subtly different even if they perform the same purpose. Goes same for stakeholders of vacation, they perform the same function, but they differ between brands of e-mail server software.

  Thunderbird leaves the server end to expose the feature, because they are really the only ones who understand what they were doing. Outlook exposes the option and especially greys out.

• The volume control in the mixer Volume for Skype is always set to very low for new calls.

  Hey all!

  It's really annoying to have to adjust the volume in the Volume mixer upside whenever there is a new call. I have no volume of speakers set to automatic in the options, and I have no idea what else controls the adjustment for volume.

  It is not enough that Skype (now a Microsoft product) can't understand the audio, I use as ANY OTHER program (i.e. for other programs to plug my headphones is enough sound to be redirected here but NOT for Skype. For Skype, that I have to go into settings and change the sound output device!). I use Skype for a few years due to its good call quality, but if I can't find a solution for this I have to change to another similar product.

  My system is a 64Pro of Win7.

  All ideas will be more appreciated!

  CAK

  Eureka!
  
  There is a setting in Windows 7, I don't know about other versions - (tab Communications/sounds/Control Panel that tells Windows to automatically reduce the volume of other sounds when the PC is used to place or receive calls.

  Skype is SO smart that it reduces the volume of itself too when there is an incoming call, and so all incoming calls have a lower volume.
  
  To solve the problem simply to set the option to "do nothing"...

  .. .and continue looking for alternative software replace Skype. Unfortunately Ms. are actively trying to destroy a good thing...

• Windows 7 could not search for new updates code error C80003FA

  I just activated Windows 7. When I tried to update, I have "Windows 7 could not search for new updates C80003FA error code".

  Tried three times with the same result. Could someone, please?

  C80003FA ReadVerifyFailure - a read verification error occurred.

  1. What is the suite of security/antivirus installed?
  2 is a 3rd party firewall installed?
  3 - is an upgrade to another edition of Windows?

  Please click on the round of departure. In the search field type programs and files in wups2.dll

  Under programs right click wups2.dll and choose Properties, when the Properties window opens, click the Details tab.
  Version of the file and the product should be showing 7.4.7600.226
  Now do the same for c:\windows\system32\wuaueng.dll
  He, too, should show file version and product like 7.4.7600.226
   
  If the version is earlier than that, you will need to install the more recent Version of the Windows Update Agent.
  The easiest way to do this is therefore download and Save the Fixit found here - How to reset the Windows Update components?
  Once the download completes close all open programs and browsers.
  Run MicrosoftFixit50202.msi and choose its default mode.

  BUT, if the installed firewall antivirus/security suite or a 3rd party is causing the "reading check error" then the Fixit may/does not work.
  If this is the case, then Configure the system to boot after download and Save the Fixit.
  Then, run the Fixit after the reboot to clean boot state.
  Restart and Cancel the clean boot steps, restart again to normal Windows mode.
  
  NOTE: in the boot minimum state all the 3rd party firewalls will be disabled. When you run the Fixit either unplug the system from it is the network connection or make sure the native firewall of Windows 7 is now on by opening the control panel > Windows Firewall.

  Expert MowGreen Windows IT Pro - consumer safety

• XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  Hello

  Let us perform the steps below and check out them.

  a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
  b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
  c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
  d. restart your computer.
  e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Update will not install - Windows could not search for new updates to Code 8007051 A

  original title: impossible to install iTunes error HRESULT:0x8007051A and Windows Update doesn't work Windows could not search for new updates to Code 8007051 A

  Am running Vista 32 bit OS and trying to install iTunes but still get the following error;

  ' Microsoft.VC80.CRT.version = "8.0.50727.4053".Guy = "win32".publicKeyToken

  "="1fc8b3b9a1e18e3b".processorArchitecture ="x 86" also HRESULT:0x8007051A

  Some research has indicated that it was due to a problem of update?

  Then tried checking updates (Windows update), who does not ("" Windows could not search for new updates - errors found Code 8007051 A ' ")

  The "get help" link was as useless as an ashtray on a motorbike.

  Any help would be greatly appreciated

  Hi Discopossum,

   

  How long have you encountered this problem?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.

  Method 3:  Clean boot the computer and then try to install ITunes

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 4:  Run the fixit available in the article below to reset the Windows Update components

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  If problems with iTunes didn't exist yet, contact the Apple Support
  http://www.Apple.com/support/iTunes/

• Windows (Vista) could not search for new updates C800044E error code

  When I try to update windows Vista Home Premium I get: Windows could not search for new updates, error C800044E code.  I need help.  Herm

  Hello
   
  You can use the following methods that can help you solve your problem:
   
  Method 1: Try reseting component of Windows Update and verify that the problem, to do follow below the link which can help you to solve your problem:
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058/en-us
   
  Method 2:
  Step 1:

  I suggest you to disable any program of security on your computer and check if it solves the problem.

  After reviewing the question you must reactivate the security on your computer program.

   

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

   

  Step 2:

  I suggest that you put your computer in a clean boot, try to install the updates and check.

  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• How to troubleshoot and resolve the blue screen (STOP: 0x000000F4 (0xFFFFFA800BCF4B30, 0xFFFFFA800BCF4E10, 0 x 000000000000003, 0xFFFFF800031D4460)) questions for new construction

  I just finished a new construction, including Windows 7 Home Premium 64-bit.  Update all the drivers went through, and now I get BSOD.  Initially, I'd get them, after that the system wake up to 'sleep' mode, but this morning I received after you start the computer from the closure.  They are the mistakes STOP F4, and I'm sure that there is a way to fix them, I just need help on where to start.  After a few reboots to check the version of the BIOS and what not, the computer would no longer connect to the internet.
  Here is my configuration:
  CPU: Intel Core i3-3225 3.3 GHz Dual - Core Processor
  Motherboard: ASRock H77M Micro ATX LGA1155 motherboard
  Memory: G.Skill Ripjaws X Series 8 GB (2 x 4 GB) DDR3-1600 memory
  Storage: Intel 330 series 240GB 2.5 "Solid State Disk
  : Fractal Design Arc Mini Micro ATX mini-tower case
  Power supply: Rosewill Capstone 450W 80 PLUS Gold Certified ATX12V / EPS12V power supply
  Optical drive: Lite-On iHAS124-04 DVD/CD burner
  Operating system: Microsoft Windows 7 Home Premium SP1 (OEM) (64-bit)
  Other: 2 x Western Digital Caviar Blue 500 GB 3.5 "7200 RPM hard drive internal

  And here are two mistakes STOP I was able to capture up to now:
  STOP: 0X000000F4 (0XFFFFFA800B938B30, 0XFFFFFA800B938E10, 0 X 000000000000003, 0XFFFFF80002F80460)

  STOP: 0X000000F4 (0XFFFFFA800BCF4B30, 0XFFFFFA800BCF4E10, 0 X 000000000000003, 0XFFFFF800031D4460)

  This was my first computer build and I really enjoyed until the software part; simply too many current intangibles.  A lot to learn and I'm happy to do, but my wife would like a stable computer.

  Original title: how to troubleshoot and resolve problems blue screen for new construction

  Hello

  Bug_Check F4 is generally hard, cables, and associated hard drive controller.

  Since this is a new construction House remove ALL power - reinstall all memory cards and cables (on
  both ends where possible) - actually delete and replace - do not just tight. Make sure heat
  sink and compound are correctly placed and that all lovers of work.

  Check with the ASRock support, their documentation online, the diagnosis and ask in their forum
  for problems known.

  ASRock - Support
  http://www.ASRock.com/support/index.asp

  ASRock - Forums
  http://www.ASRock.com/support/forum.asp

  ASRock - downloads
  http://www.ASRock.com/support/download.asp

  =============

  See this article:

  You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when
  you try to resume a computer that has a large hard drive SATA.
  http://support.Microsoft.com/kb/977178

  -----------------------------------------------------------------------------------------------------------

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ================================================================

  BCCode: F4 0x000000F4

  Check and reinstall the cards memory and cables (at both ends where possible) in fact
  delete and replace - do not just tight. On a laptop computer on all you can do is reinstall it
  memory and possibly check the connection/contacts on the hard drive. Memory could
  be the problem, so if you have more than 1 stick swap them in and out to see if the
  problem follows a stick or try the new memory. Antivirus/anti-spyware/security programs
  have been known to cause or have a role in this matter.

  More general patch updates day and low level chipset BIOS drivers and other control
  software.

  Also check the wiring on the hard drive.

  =========================================================

  Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION

  CRITICAL_OBJECT_TERMINATION bug control has a value of 0x000000F4. This indicates that a process or thread crucial to system operation has unexpectedly is released or ended.

  Important info if you received a STOP Code
  

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  CRITICAL_OBJECT_TERMINATION parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The Terminal object type: 0x3: Process of 0x6: Thread
  2	The endpoint object
  3	The name of the process image file
  4	Pointer to a string ASCII containing an explanatory message

  Cause

  Several processes and threads are necessary to the functioning of the system. As they are completed for some reason, the system can no longer function.

  BCCode: F4 0x000000F4<-- read="" this="">
  * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

  ==================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant
  (also, Windows 7 and Windows 8).
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen
  of death "crashes and displays the information about all crashes in one
  Table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista (also Windows 7) Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I'm about to upgrade to a NEW computer and do NOT know how to approach the transfer on my Photoshop CC program/service to the new computer without LOSING any settings. Can someone advise?

  I'm about to upgrade to a NEW computer system and do NOT know how to approach the transfer on my Photoshop CC program/service to the new computer without LOSING any settings. Can someone advise?

  Trevor thanks for your advice and take the time to answer.

  What about Paul